issue of scanning parameters 8500

Does anyone know how to set the parameters of scanning, so after the first analysis, it will ask if I want to do another analysis, currently a little complete analysis and don't ask if I want another. I sometimes scan several documents at the same time.

Currently, I start the scan everywhere process to analyze a second element.

Hello grefra1948

The CD should have the complete software, unless you did a custom installation. In any case, Yes, it's a good idea to uninstall the current software before reinstalling with the following. The items below should help you install the printer.

Installation of the software of the printer on a wireless network or network (Ethernet) cable

Installation of the software of the printer with USB

Tags: HP Printers

Similar Questions

  • Print/scan to 8500 MacPro OSX 10.5.8

    I just purchased the OfficeJet Pro 8500 909 a and installed the software from the included CD. I can print fine (although as others have noted the original shipment is very slow) of my MacPro as well as two computers wireless mobile printing.

    I have the printer connected via USB to my Time Capsule, which is in turn connected by Ethernet to my MacPro. I can't scan with this configuration. However, I can use all the features when I log on my MacPro via USB directly (without going through the time Capsule).

    With other printers (Canon, Epson) I was able to just disconnect from the Capsule of time then to my MacPro when I want to scan to work around the problem. When I tried with the 8500, I got a USB Communication error on all subsequent draws. This problem was solved when I reinstalled the printer in the Print/Fax preferences.

    My last question would be: is there a method of choice for the configuration of the printer using a router without wire/MacPro 10.5.8? Should I try ethernet instead of USB connection? Suggestions?

    Thank you once again, but I think I found a solution!

    After you apply an IP address to the printer, I connected directly to my MacPro via an Ethernet cable. Then I reset the system print and run the HP Installer and voila! I had full access to all the features AND I can print wireless from my laptop.

    Scanning and printing works very well, I do not have the fax connected so I can't say if it works, but I'm happy with everything.

  • HP Photosmart 2570 - scanning parameters not no projection in the HP Solution Center software

    Everything worked, and then it stopped working. After several uninstalls and reinstalls, I have running HP solution center software but don't show any scanning settings. I am not able to scan. The button to scan does not yet show upward.

    How can I get the scan to show button and do scan?

    Try bypassing the solution center to access the scan function.

    To work around the centre of solutions for scanning:

    1. Click on the on the start menu.
    2. Click on computer.
    3. Open the C drive.
    4. Open the Program Files (x 86) folder.
    5. Open the HP folder.
    6. Open the folder of digital imaging.
    7. Open the bin folder.
    8. Run the hpiscnapp.exe.

    If the hpiscnapp.exe shows the scan options and allows you to scan, then right click and create a shortcut on the desktop, then you won't have to dig for it every time.  I was going to name the shortcut something like HP Scan, so you know what it is.  Let me know what happens.

  • Issue of scanning/Printing Office Pro 8600 N911g ADF

    The printer works perfectlyt except when scanning or printing through the ADF. When the charger is used to scan or print material shows a thin, but documents line strong, black from top to the bottom of the printed output (or scanned in).

    This line does not appear if the document is feed into the ADF and is about 1 1/4 "from the right side of the front of the scanned doc and the same distance on the back, but on the left side. If scanned into the computer and saved the doc file scan seems to have the line in the file. I thought it might be a problem of ink cartridge, but if the analysis file has a line on it of course is not a cartridge problem. The original doc of feeding through the ADF remains prestine. Interestingly, when the line appears on the printed doc or scan does not appear to align with a roller or the device of the feeder with the module duplex or ADF.

    Have completed all the steps described on the HP support site in the cleaning of the rollers, etc. on both the two the duplexer and the ADF without success. The problem occurs only when a document is fed through the ADF, so am reasonably sure that the problem is internal to this part of the unit or it could be a software driver problem.

    Am a relative novice here so any help, suggestions or advice would be really appreciated.

    Hello

    Please follow the steps mentioned in the video.

  • Issue of scanning HP Officejet 7612

    I can't get my HP Officejet 7612 to analyze.  I use Windows 8.1.  I ran the HP printer Installation Wizard.  Test print was OK.  Analysis of test was inadmissible.   I ran doctor printing & scanning HP, but it keeps stuck on Windows (WA) Scan.  Is sitting there for an hour with no progress and so I have to X out of it.  The printer prints well and copy very well.  Need help.

    Hey @phoustonsellers,

    Welcome to the Forum from HP Support.

    I see that you encounter a WIA error when you try to scan with your HP Officejet 7612 Wide Format e-all-in-one printer. I would like to help.

    My colleague @Sunshyn2005 has suggestions in another thread which may help. Click here and follow the steps listed under the «please follow...» "the position.

    Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

    Thanks for posting in the Forum from HP Support. Have a great day!

  • Issue of scanning for deskjet F335

    I have a printer all-in-one deskjet f335.  I installed the drivers and the latest software on a new computer with windows 7 (64-bit).  I can't have the printer to scan photos or docs from the solution Center, the diagnostic test say the amount of the fine, I'm able to scan documents to paint, but I really need to be able to scan some photos as well. Any help would be appreciated.

    You have already done so, but this other post indicates that they uninstalled, reinstalled and then apply the patch, that finally worked. Case also has an upgrade to Windows 7, so that yours seems to be a new machine that already had Windows 7. There may be worth a try.

  • Officejet 6700 scanning settings

    OfficeJet 6700 Premium (Prod # CV078A) network (direct connection to the router). 1 = Win XP SP3 computer. computer 2 = WIN7 Pro SP1 32-bit;

    A couple of questions about scanning. This printer has replaced an Officejet 6500 failure that has served me well for several years before suffering significant constipation of ink.

    1 scanned files are much larger than those produced by my 6500. I adjusted the scanning parameters, including PDF (NOT available), B & W and size of file/quality under Advanced settings, the "smaller" value The file sizes are about 3 x what has been produced by using 6500 dpi (200). Any suggestions?

    2 prerequisite software registered automatically scans as "Scan001", "Scan002", etc.. Current software requires to manually change the file name for each further analysis when scanning from the computer using the HP software. Is this correct feature? (If so, it is a step backwards.) See also 3 below. [Edit: point of Travis' 2 in response below deals with this issue - thanks!]

    3. scan of the computer (from the printer front panel) saves the file 'Scan0001', 'Scan0002', etc.  This works as expected. Why is this not implemented when using 2 above? (Or am I missing?).

    Thanks in advance for the answer and enlightenment.

    OK - downloaded Free Edition Paperscan v.1.8.3 and used the TWAIN driver to get the image of my Officejet 6700 using the document feeder. Registered 1 page file to PDF with dpi set at 200. File size is 22K. (Now, that's more like it.) Oh, and the quality of the image will appear better, too. [Edit: but see message below re.] NAPS2]

    Same document 1 page using the old HP scanning, recorded as a simple pdf software with 200 dpi setting results in a file size of 177 K! 22 K vs 177 K - same, I can do that math.

    Conclusion: there is something seriously wrong [ineffective/sloppy code] with the HP scanning software. (and I don't think they care)

    Recommendation: Fix it.

  • LaserJet Pro M225dw MFP: Problems of scan to network folder

    Hello.

    I set up a portable computer with the printer mentioned above. No problem printing and no problem to set up Scan to network on the web interface folder (ran test and got the result OK) but there are issues when scanning in fact the printer. I put it in a document to scan in the top loader, select scan, scan to network folder, your computer (or rather folder name) and click Scan. The printer draws the paper and then started working. A pdf document will appear in the folder, the printer is how ever is already done. He keeps grinding on it for a while and then the signals being completed. At this moment, the pdf file disappears from the record.

    What could cause that?

    Hi @M3rLiN_74,

    Welcome to the HP Forums!

    I noticed your post about how you cannot scan your network with your HP LaserJet Pro MFP M225dw 10 pro Windows folder. And I'm happy to see it for you!

    This could be a problem with the charger of the printer, or perhaps a connection software / junk the computer. What happens if you try to scan to network folder using the glass of the scanner of the printer? Are you able to scan from the computer by using the top of the charger page? Scanning the computer (Windows).

    For the moment, please try our HP print and Scan Doctorand let me know what happens!

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    I hope hear from you soon!

  • How can I get my HP Officejet Pro 8600 more to scan a full legal size paper?

    How can I get my HP Officejet Pro 8600 more to scan a full legal size paper? He cut scanning letter-size, but the specifications say it will scan the legal size.

    Hello

    The analysis of parameters need to be changed to HP Scan App. launch of the HP scan application from your computer and select the option left (PDF or JPEG...) and then choose the size of legal scan on the right.

    Save and close the application.

    Now you can scan in legal.

    Note:

    You can also create your own settings for scanning HP scanning parameters.

    Good impression

    Evelyne

  • My HPC5180 stopped communicating with my computer. A ran scan Dr. façade prob. cannot fix

    The scan doctor told me to run the hp Solution Center to enter and solves the problem of the façade as I cannot scan from the front panel more. I uninstalled and reinstalled x 3. Why can't sweep fix Dr. prob frontpanel on its own?

    If you receive a message about scanning parameters are not set or there is no analysis Options, there is a document showing a information how to re - activate the shortcuts to scan on the front panel of the printer. This document can be found here.

    I hope this helps. Let me know if you need additional information.

  • D110A series: scanning to PC

    Hello

    I am trying to scan from my printer Photosmart HP D110a scans my file and I get the following message is displayed:

    Error

    "Cannot perform the analysis because another program or computer using the networked HP imaging device."

    In the last three months, I changed the desktop to laptop computers.  I installed all the drivers and software and have been able to print successfully in recent months, but I think it is perhaps the first attempt at analysis since getting the new laptop.

    Is thought printer is scanning in my old computer, or could it be current software interfering with the ability to scan?  I did not have this problem in the past?

    Help, please!

    To press scan on the printer to scan to the computer, it must be configured. The printer probably still have the old computer stored information.

    Try to start the hp software and go to the settings, the destination of scanning parameters and update/save the setting.

  • HP Photosmart 7510 not scan to computer (MacBook Air)

    Hello

    I have a HP Photosmart 7510 connected wireless to my home network and I can't select my computer when parsing the list for the computer on the printer.

    I use a MacBook Air with OS X 10.8.2

    I've updated all my drivers, reinstalled the software and disconnected/reconnected to the network several times.

    I can print to the 7510 my computer.

    I can scan the 7510 using the HP software on my computer

    I am unable to find 'activate Scan to Computer' in the settings on my computer (and all instructions on this Web site are for Windows)

    We organize also several computers window on our network, and these show all in the analysis of computer selection and can be analyzed successfully to. (without going through the HP software installed!)

    What is missing for me to scan to my computer? Scan to other computers is not an option (for reasons of confidentiality) and scanning the computer is also not ideal, because I bought the printer for the analysis of it infrastructure.

    Thank you

    Emma

    Hi Emma,

    If the Scan of the computer does not appear under the HP utility, more liekly something went wrong in the HP installation wizard.

    Try these steps and let me know if that can help you:

    First reset the system as follows:

    * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

    Click on the Apple menu and then click on System Preferences.
    Select Print & Scan.
    Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
    Click OK to confirm the reset.
    Type your user name and password.
    Click OK. The printing system resets.

    Then, go to Applications\Hewlett - Packard\Device Utilities and follow the HP installation wizard.

    Now open the HP Utilitiy and search the computer Scan in the scan parameters section.

    Kind regards

    Shlomi

  • Error message: "cannot find the wireless device" and not scan using 3 in 1 copy fax print HP 4500.

    Original title: Carpenter

    I can print but can't scan. Tried to uninstall then install the 3 in 1 copy fax printing hp 4500 but says cannot find the wireless device.

    Hi Ryan,

    You can check the link to HP support to run the HP Diagnostic Utility to check the issue of scanning:

    Find and fix common problems using tools of diagnosis HP printer=

    You can also check out the link to HP support and try to update the latest drivers/software for your printer:

    HP support

    You can also read the articles and check if it helps:

    Add or remove a scanner

    Scanning: Frequently asked questions

    The problems of scanning

  • HP Officejet Pro 6830: Scanning with Officejet Pro Wireless 6830

    HP Officejet Pro 6830 analysis wireless? I tried using the wireless and ethernet without success. When I look at the system of preference/printer & Scanner / Officejet pro 6830 I see not "Scan" type in the printer option although it seems if connect you via USB.

    Hi @kskhater,

    It may be best to contact Apple to make sure everything is configured correctly and the necessary ports are open.

    You can create a second admin account, is not on the privileges, it is to determine if there is a problem with your user profile. The question might have something to do with your printing system. I know that the issue is scanning, but the printing system, it's what the driver, and since we already have reset the printing system, Apple may need to reload, or the operating system. Create a second user account will help determine whether the problem is related to your account.

    As you can see, at this point, we are at a stage of diagnosis, troubleshooting is the process of elimination. To identify the cause in order to solve the problem.

  • Cannot scan Duplex with Acrobat Pro DC

    Cannot scan Duplex with Acrobat Pro DC

    Hello

    There is now a patch available, which fixes the issue of scanning duplex. Please visit: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-august-06-2015.html to download and apply the patch.

    Please let us know how it goes.

    Thank you

    -ashu

Maybe you are looking for

  • Recovery media

    I'm putting in place 10 identical HP touchsmart tm2 computers laptops.  I need to create recover media sets for every laptop or can I create 1 game and use it as needed.  It is the system repair disc, should I create 1 or 1 for each laptop.

  • I try to open Facetime

    When I try to open Facetime it refuse to do so and he gives me this I work with an iMac 27 "late 2009, 3, 06Ghz intelCore 2 Duo 12 GB memory game ATI Radeon HD 4850 512 MB 10.10.3 System. Is it not possible to contribute to this constellation?

  • Attachments to emails sometimes open in Windows Media Player when the text is in MW.

    Sometimes, when I try to open an attachment, Windows Media Player tries to take charge and cannot open the attachment in Microsoft Word! What is a security setting? At soon Moff3

  • Bridge is included in the package or do I now have to pay extra?

    I recently bought the photoshop and lightroom package £8,57 a month however when I opened photoshop I could 'Browse through bridge' so my question is is included in the package of bridge or do I now have to pay extra? Thank you

  • I want to buy illustrator and Photoshop apps

    I want to buy illustrator and Photoshop apps, but I can't get the page to load still long