Issue of video data

I want to know which of the follwing uses most of the data or if it's the same thing:

I watch a sporting event on the WatchESPN app on the phone or using the phone as a hot spot and viweing event on my laptop?

Thank you

There is more than that - but at a high level for the video that you are using the same. The phone has a screen HD, roughly the same number of pixels as your laptop. The size of the screen is as important as the pixels as you shoot.

That said, your laptop on a wireless access point takes additional data - updates, running background applications, synchronization of e-mails, update profiles of virus/malware, etc..

So the bottom line is you are always going to use more data in HotSpot mode than just streaming on your phone, but not always because of the video stream.

Tags: Motorola Phones

Similar Questions

  • How to stop "the transfer of video data" display on Twitch full screen?

    When switching to full screen when viewing a stream of shaking, a collection white/status box appears in the lower left corner of the saying of the screen "to transfer video data. "# {a kind of address}.
    Passage of the mouse causes the box to reach the bottom right.

    This does not happen to contract full screen in other browsers (IE and Chrome)

    Found, with the help of reddit.com/r/firefox/
    Mode full-screen status-4-Evar/advanced/Detect uncheck...

  • Why Eclipse/BlackBerry/VideoRecordingDemo samples always saves maximum video data 16 seconds?

    Problem:

    VideoRecordingDemo, which is imported from samples Eclipse/BlackBerry, always saves maximum 16 seconds on the Smartphone BlackBerry 9800/9900 video.

    However,.

    When Media/Video camera is used, the video data that can be recorded forever, have no any limitaion.

    If you know the reason, please let us know.

    Thank you for your attention,

    It is not a problem.

    Please that we forget.

    In fact, only the file (apperance) shows the old data file, but the file is totally different from the old data file after reading the record.

    It's my misunderstanding.

  • Issue of video output P6240Y

    I have a HP P6230Y with Radeon HD 4200 integrated video card. It is limited to VGA and DVI as outputs. The question is: is this component of support for the Radeon HD 4200 function via the DVI port?

    I'm looking to convert the RGB output (Y, Pb, Pr) for a stream to my TV through my home theatre video high definition DVI.

    I hope that the DVI / conversion cable component RCI 3 of monoprice.com will do this for me but I want to make sure before I buy!

    Thanks in advance!

    Starootoo, welcome to the forum.

    The HD 4200 is integrated into the motherboard; not a dedicated video card.  It shares system memory.  I doubt it will do what you describe.  However, I can't say with certainty.  Embedded video is not the best to make more power of a monitor, in my opinion.

    I suggest that you add a dedicated video (PCIE x 16) card to the system with HDMI capability.  This would make the upgrade of power supply (PSU) necessary.  It would give you a good amount of performance share gain is not system memory.

    Please let us know if this solved your problem or not.

  • Issue of video card about the P6310

    I have a P6310 with Nvidia 9100 video card, and it is trolling intermittently during the game.  I had the intention to upgrade the video card and power supply, but am not sure what type of video card to search.  Should I look to the PCIe, PCI or AGP?

    Here are the specifications of the computers:

    Processor AMD Athlon II 630 Quad-Core processor
    (Vivid RAM) memory 6 GB
    Type of memory DDR3
    Memory expandable to 16GB
    Size of the hard drive 1 TB
    Type of hard disk SATA
    Optical drive SuperMulti DVD burner with LightScribe technology
    Operating system Windows 7 Home Premium 64-bit
    Network card 10/100Base-T network interface
    Video Graphics NVIDIA GeForce 9100 with 256 MB graphics card
    Display None
    Other ports 15-in-1 memory card reader
    number of slots USB 6
    TV tuner None
    Dimensions 16.85 "(L) x 6.97" (W) x 15.32 "(H/D)"
    Warranty 1 year
    Space saving design NO.
    Additional features High-definition audio with up to 7.1 capabilities surround sound

    Excellent choice for the ATI 5750 1 GB.  It is also a low-power card 18-86 watts. The ITA, it will take a power connector, but the new power supply should have what you need.

  • issue of video controller on my t43

    I have an IBM Thinkpad T43. He had WIN XP on it. I've migrated the OS for WIN 7. Now my video controller requires a driver for it. I searched the web for a driver without success. Can someone help me find a video controller WIN 7 32 bit 64 bit for my thinkpad driver please? My email is [email protected]. Thank you for your support.

    Yes, that's what I was looking for.

    There is no driver support for Vista/W7 for integrated graphics Intel on T43. You will need to search the Web for a modded driver.

    This thread may be useful:

    http://Forum.ThinkPads.com/viewtopic.php?f=2&t=114712

    Good luck.

  • Issue of options data blackBerry related to passports

    Y at - it a parameter to force the data via the internet connection when you are connected to a service, rather than using data through the wireless provider?  It seems that I am the data usage via my Rogers account when connected to my ISP and data plan exceeding my Rogers.

    Later I think 10.3.2.2836

  • Facing the issue when inserting data by region table

    Dear all,

    I have a region of the table which will be created initially five rows and im generating a sequence so that five lines simultaneously. First insertion was smooth without any issue.when I train for the second time, loading the page while it shows 10 records and then the third time, she displays 20 records in the table. He brings the existing record that is inserted into the table. Please get a solution to solve. The script below is my AM insert method

    If (! vo.isPreparedForExecution ())

    {

    vo.executeQuery ();

    }

    VO. Last();

    int fetchedrowcount = vo.getFetchedRowCount ();

    System.out.println ("number of rows->" + vo.getFetchedRowCount ());

    for (int i = 1; i < = fetchedrowcount; i ++) {}

    vo.setMaxFetchSize (0);

    VO. Last();

    VO. Next();

    Line OARow = (OARow) vo.createRow ();

    vo.insertRow (row);

    row.setNewRowState (Row.STATUS_INITIALIZED);

    row.setAttribute ("ClTransId", getOADBTransaction () .getSequenceValue ("apps.xxhrq_chcklist_trans_s"));

    }

    Heepth,

    The logic is simple.

    When the page initially loads, it brings 5 lines in your outer join function, then your code create another 5 rows based on the fetchedRowCount which is 5. All together, it makes 10.

    Second time when the page loads, the query returns (5 + 5) 10 rows and your code create another 10 rows based on the fetchedRowCount which is 10 this time. All together, it makes 20.

    It is clear now?

    Now go ahead and implement the solution I proposed. If all good, would you please close the thread by checking the useful and accurate answers. If you have questions let us know.

    See you soon

    AJ

  • Issue while loading data using the file Rules Essbase

    Hi all

    I am facing problem while loading data using the Rules file. In the rules file, I rejected several members in two areas (two dimensions). Now if I load the data using the rules file I'm getting errors for all members in the dataload.err file. If I reject mutiple members of a single field, the data load without settling errors in the dataload.err file.

    I want to know how rmany members of several fields of ejection for loading data using the file Rules Essbase? Is it possible?

    Okay, okay... I think that you must assign Global Select / reject Boolean in the parameters of loading data as 'Or':

  • Issue of Cluster data store

    Hello

    Is it possible to have 4 ESXi clusters, each with their own set of SAN data warehouses, all joined to a Cluster of unique data store? I have not found exactly this configuration described anywhere. I understand there are limitations such as 32 data etc. stores and paths to data warehouses will be available from certain hosts.

    Has anyone tried this before? I'm trying to simplify investment VM for Cloud management platform.

    Thank you

    Mike

    This is a supported configuration, and I have a few clients that are running this configuration without problem. Have a look here for details: linking DRS multiple clusters in a single Storage DRS datastore cluster. - frankdenneman.nl

  • Reliable message of guard - performance issues - of the data?

    Hello, we are on 10.2.0.3 (I know, time to upgrade, just can't right now). Data Guard is in place, in AVAILABILITY of maximum production work that was ongoing for 3 years once a week with no problems started taking 10 + hours. He used to take 2 hours Max checked, everything, nothing has changed. Ran AWR report and see that the high wait event is a RELIABLE MESSAGE:
    Top 5 Timed Events 
    
    Event Waits Time(s) Avg Wait(ms) % Total Call Time Wait Class 
    CPU time   45,270   97.5   
    *reliable message 2,655 534 201 1.1 Other*
     db file sequential read 199,278 366 2 .8 User I/O 
    db file scattered read 122,914 287 2 .6 User I/O 
    LGWR wait on LNS 35,511 209 6 .4 Network 
    Is - this Data Guard? What can we do to fix this? I dropped the day before, tried to re - run this job and still have high reliable message:
    Top 5 Timed Events 
    
    Event Waits Time(s) Avg Wait(ms) % Total Call Time Wait Class 
    CPU time   11,490   98.7   
    reliable message 804 77 96 .7 Other 
    db file scattered read 92,969 34 0 .3 User I/O 
    db file sequential read 17,596 25 1 .2 User I/O 
    log file parallel write 13,268 11 1 .1 System I/O 
    I don't understand much about Metalink. If I dropped the day before, newspapers are not speeding it more, shouldn't that have improved performance? Or should I disable the configuration to test any scenario Data Guard in this case? In the last configuration disabeling required re-buillding DG however. Please notify. What is the reliable message? Thank you!

    My bad. You are right, they are 10MB.

    I have galanced bytes and somehow added an extra 0.

    The 200 MB comes from the query - 'optimal_logfile_size = 201.

    The rule of the 20 minutes of CKPT is good, but sometimes the databases have a peak period, which is only about half a day.

    10 MB is a bit small, I consider what makes them great. At least 100 MB.

    I remember you, you had the 'Data Guard - total loss of primary education"question just now.

    Best regards

    mseberg

  • Issue with video for the release of the ipad

    Hello

    I try to have a question slide that contains a video.  After a few seconds, the video stops and the user had to answer the question.  Then the video would continue... I am having some major problems!  I can't even video to display... have you tried in .flv and .f4v formats...

    The orignal file was a .mov

    On the import of video, Captivate asked me if I wanted to convert the video to a file .flv or .f4v I agreed and the video wouldn't show

    Solution: Convert the .mov to a .mp4 file onto mine and then insert the .mp4 file in the slide and now it works fine.

  • Date of issue - conversion to date and the date of conversion in months

    I have some data in a text file for SQLLDR from a SQL SERVER.

    In date columns are YYYY-MM-DD format eg-2011-01-03 00:00:00

    but in oracle, we use DD-MM-RRRR.

    Don't know why the SD and MM are get interchanged. Help, please.

    It's my for sqlldr control file:
    LOAD DATA 
    INFILE 'F:\NV\Permits\SQLLDR\permits.txt'
    REPLACE 
    INTO TABLE lot.p_permit
    FIELDS Terminated by "~" TRAILING NULLCOLS
    (
     CP_PermitID  "TRIM (:CP_PermitID)",
     CP_SubmitDate "to_date(to_date(substr(:CP_SubmitDate, 1,19),'RRRR-MM-DD HH24:MI:SS'),'DD-MM-RRRR')",
     CP_IssueDate "to_date(to_date(substr(:CP_IssueDate, 1,19),'RRRR-MM-DD HH24:MI:SS'),'DD-MM-RRRR')")

    You convert date to date. First TO_DATE

    TO_DATE (substr (: CP_IssueDate, 1.19), "DD-MM-RRRR HH24:MI:SS")

    Converts correctly 19 characters of the CP_IssueDate string to date. Now, look at what is happening with the other. To_date first argument is string. Since to_date (substr (: CP_IssueDate, 1.19), "DD-MM-RRRR HH24:MI:SS") are dates:

    TO_DATE (to_date (substr (: CP_SubmitDate, 1.19), 'DD-MM-RRRR HH24:MI:SS'), "DD-MM-RRRR")

    implicitly converts the to_date (substr (: CP_IssueDate, 1.19), "DD-MM-RRRR HH24:MI:SS") to a string using default date format, then converts it back to the date using the format "DD-MM-RRRR. Of course if the default date format is not "DD-MM-RRRR" you can either get an incorrect date or a mistake. In any case, use:

    LOAD DATA
    INFILE 'F:\NV\Permits\SQLLDR\permits.txt'
    REPLACE
    INTO TABLE lot.p_permit
    FIELDS Terminated by "~" TRAILING NULLCOLS
    (
     CP_PermitID  "TRIM (:CP_PermitID)",
     CP_SubmitDate "to_date(substr(:CP_SubmitDate,1,10),'YYYY-MM-DD')",
     CP_IssueDate "to_date(substr(:CP_IssueDate,1,10),'YYYY-MM-DD')"
    )
    

    SY.

    Published by: Solomon Yakobson August 1, 2011 16:45

  • Issue of video Transition PRE9

    Hi all

    I use PRE9 V9.01

    I try to add one of the transitions video clips.  None of the transitions do not work properly.  For example on transitions 3D very basic, I see a transition between plans, but it is transitional to the OLD clip to the NEW CLIP bad.  The OLD clip is the image of the transition and at the end of the NEW clip appears just in rather than begin the transition with the NEW CLIP and slow down the transition out of the OLD CHARGER.

    I tried numerous revisions before and after the Cup did not have another.  I moved the transition start at the Center and the same thing.

    Any ideas?

    That's what I recommended, Bill.

    But we could be dealing with another two question however.

    rinkrat, have these two different clips - or you slice right through a clip and put a transition on the edge? If the latter is what you've done, your transition will not work just because, well, you're basically transition from one clip to itself. And that's kind of what the screen caps look like you do.

  • Issue of video crop and zoom

    I'm new to this product and could not find my specific problem (or at least not a not recognize).

    I used video uploaded to make a simple music video (to experiment on the trial version).  I have the first clip in the sequence, and then I add a second clip and after working with her for a few review of minutes than in the sequence Viewer, video is enlarged and the sides are cropped if I see only an enlarged photo of the Center.  The zoom has always adjusted well.  I don't understand why the video is automatically enlarged and cropped by first and when I delete the clip and replace it does the same thing.

    Any idea?

    The first clip in the video was a 640 x 360, while the second video is 1280 x 720 and had every two square pixels (1.0)

    However, they were the two WMVs.

    The fact that the Zoom level is set to made means that the display in the program monitor is zoomed to place the Panel, is not that the video is resized to fit the sequence.

    If your second clip is larger than the first, and that you place the second clip in a sequence that is sized for the first, then naturally you will only see a piece (for example, the Center cropped in your case), unless reduce you the second clip. Or use a larger sequence.

    If you want the item to be measured automatically to fit the sequence, then you can enable the default scale to frame size preference. (See this for a video explanation of this preference.)

    In general, you evolve with the property scale of the impact trajectory, not with the Zoom setting in the control panel.

Maybe you are looking for

  • X 250 and HDD disappears

    Hi all I have random problem with BSOD with Windows 10 X 250 races. The BSOD error may vary and is not probably important (Windows encountered problem.., kernel_inpage_error, critical_process_died etc., would not a precise formulation of BSOD). The m

  • Windows product key doesn't work is not for the reinstallation of Windows 7

    So my Lenovo (B560) became super slow and I want to wipe the hard drive and reinstall Windows 7. But when I looked on the Microsoft Web site and tried to check my key I received the following message is displayed: "The product key you have entered se

  • Horizontal stripes LaserJet M1120n MFP

    When I print with my HP LaserJet M1120n MFP, I get the scratches on my document, sometimes, you can also see a part of the document in the stripes (in this case, text). A that someone already had this problem? Best regards, Thomas

  • Sound for Win10 is messed up.

    The sound for Windows 10 build 10074 is buggy and does not export the sound. The sound that comes out looks like an airplane crashing. Is there a quick fix? Any help is appreciated.

  • Error code #2000-0142 after the laptop is a Dell fall.

    Original title: I have a Dell Inspiron 1545 with Windows 7 x 64 which does not load windows. No new software or configurations have been added since this problem started about 2 weeks ago.  However, the laptop fell.  I was able to run the system diag