Issue of volume control after downgrading A210-1AS for Win XP
Hey all,.
I recently upgraded my satellite A210-1AS to xp and after sorting more things, including the audio drivers, wireless, etc, I have some problems (surprise, surprise)
1. the sound adjustment on the front wheel can't control the volume, although it worked fine in Vista.
DD realtek audio Manager is installed fine, AFAIK. Any ideas how to solve this problem?
2. the buttons on top to control the media work more (toshiba easykeys?).
Are there drivers for these that everyone found for XP?
3. (and I'm not too fussed on) there are 3 yellow exclamation marks in Device Manager.
1. I believe is the modem, which I am not at all worried, the other 2 I do not know. Any ideas?
Thank you very much for the replies, would be nice to sort. Although I could use volume control in xp, it is not ideal, as I'm sure you can imagine.
Will check in the morning, thanks again
Hi Joshua
I m the owner of the Satellite A210. This laptop is similar to the Equium A210.
I installed a Windows Vista and XP on the second partition and I have the sound and the sound volume control works very well with both operating systems.
But I had a little problem with the installation of driver sound. After a short investigation here in the forum, I discovered that I need to first install MS patches; KB888111 and KB835221.
After installing the patch, I installed the Realtek audio driver. It worked like a charm.
(2) control buttons doesn't work on my laptop because I have an A210 with the AMD processor and chipset and XP from Toshiba Utilities for my series are not available.
(3) I have 2 yellow exclamation marks in my device manager. The modem works because I installed the modem driver from an another series of notebook A210. The driver also works.
Two other unknown devices ("possibly PCI memory controller" or "Mass Storage Controller) may be linked to the material that is only supported by Windows Vista and not XP. Therefore, the XP drivers don t exist also.
Good bye
Tags: Toshiba
Similar Questions
-
Volume control is not showing up for following
The volume control has disappeared to the individual tracks. Anyone know how to get it back? I can't find the right button.
Here is a screenshot:
Just lay the track header to make room for the volume control and pan buttons... Click and drag right at the end of the track header border.
-
User - Auto-Off function after comments "Check disk" for Win 7 & Win 8 is over
Hello
Hard disk for error checking and fixing it is a routine system for Office PC network maintenance, if the user is to have performance at all times.
The last PC has a hard drive of 500 GB to 1 TB size and many files for sanning. If will take about 10-20 minutes to perform the task. Generally it is not recommended to do so due to the timing tight work at office hours. Most of the office user prefer to do after working hours leaving their PC on for scanning. To Win 7 & Win 8 do not have an auto-off function after completion of the task of "Check Disk". The PC must be on during the night after scanning.
For energy saving, I would suggest a new feature that allows the user to choose to shut down their PC when the task is completed.
Thank you
Low
Hey Joe,
Thanks for the code of your order.
Can I know how to run this command? I still have to go in my computer > C drive > right click > properties > tool > Check Disk to perform this task?
I use the desktop PC network in which I am not an administrator, what I'm looking for the assistance of the administrator to create this file in my PC?
If I want to check the disk with this command, do window 7 / 8 allow me to do?
Thank you
Low
Hello
Thanks for the reply. The commands shown above are content to a Windows batch file. You simply create the Windows batch file using Notepad. The steps posted above shows how to create a file Windows specific command and its content. It then saves at a given location. You can then open the Windows created batch file to process orders (content).
No, it's all just a new file, we create with the .bat extension so that Windows will understand that the file we will create a Windows batch file. Thus, we will be able to run these commands at the command prompt. In DOS, OS/2and also Microsoft Windows, the batch file is the name given to a type of script file, a text file containing a series of commands to be executed by the Shell.Unfortunately, chkdsk requires administrator privileges to run correctly. You need to run the command of Windows as Administrator file to run all the commands, but you don't need administrator privileges to create the file. Even check the disc from the properties of the disc requires administrator privileges. You must be the administrator of your operating system, but not the administrator of your network.Windows will not prompt you to rerun the command of Windows as Administrator file. Instead, it will show you an error message indicating that you are not an administrator, and the command will not run if the Windows command file, you try to run contains commands that require administrator privileges, and you tried to run the command of Windows under a limited user account file. To avoid this problem, start the batch file to Windows as an administrator to ensure that all commands in the Windows batch file will run correctly.The commands shown above will do the following- Turn off echo command
- Scan the drive DriveLetter errors found during the analysis of fixation
- Shut down the computer after 0 seconds
Note: to run a particular file as administrator, right click on the file and select run as administratorThank you
I hope this helps :) -
Please can you help me - I turned my cell phone Envy in to an expensive paper weight, after (below) the upgrade of Windows 8.1 at 10 - I hated it and decided that I must return to 7Pro as I want to join the domain and want to install VMware etc.
I made the plunge and left me without back that all the important factors are missing, including USB, NETWORK interface integrated hubs & wireless - the machine has no DVD player and it won't recognize not flash or SD - ports USB card readers but work for dongle wireless keyboard and mouse.
Not too sure where to go now - any ideas?
Model 15-u000na
P/N J1W92EA #ABU
Hello:
There are other drivers you need...
Wireless:
This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.
FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70859.exe
You will need this bluetooth driver for this model of the wlan card.
FTP://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69230.exe
PCI device: 1 driver on the list from the link below.
Series 8 Intel xHCI HC - 31 9: download, unzip and run the setup.exe file.
PCI Simple Communications controller:
This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.
File name: sp71258.exe
ACPI\HPQ6007:
This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.
File name: sp71811.exe
ACPI\INT33A0:
This package provides the driver for Intel Smart Connect technology for the laptop models running a supported operating system. The driver for Intel Smart Connect technology allows the system to exit the sleep mode and web update supported applications such as electronic mail. The system enters sleep once the update is complete.
File name: sp68943.exe
ACPI\ACPI000E: The device missing the driver's ACPI wake up alarm.
After several attempts to scouring the internet, I found the file that I attached below.
This is the ID of the material shown in the file of configuration information...
[Manufacturer]
STD % = AcpiTime, NTamd64[AcpiTime.NTamd64]
% * ACPI000E. DeviceDesc % = AcpiTime_Inst, * ACPI000EDownload and uncompress the file in its folder. Do nothing with the 2 files in the folder.
They must be installed manually as follows...
Go to Device Manager and click on the (unknown) device of ACPI\ACPI000E who need the pilot.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.
Make sure that the include subfolders is selected, and I hope that the driver will be installed.
Then restart.
-
After a few months of sporadically trying to access a Microsoft Account or the store on my Dell Inspiron 660 without success (with some 1,000 others Win8 according to M.S. Articles), more its incompatibility with * all * of my external audio interfaces USB despite the driver updates, the time has come to downgrade to Win7 from Win8 preinstalled host. I guess the software is the problem as long as the hardware works fine otherwise and everything will work in Win7.
So, the issue will be any retail version of Windows 7, for example. at Amazon, being 100% compatible with this machine, or is there some stuff with the bios that would need fixing. It's a Dell configured with Win7 version to buy.
There is not a Dell of Windows 7 version to purchase. Dell Windows 7 media differs from Microsoft media it activates automatically when it is installed on a Dell computer that is eligible, and it has some elements of customization (background/user images, logo support, etc.).
A 'detail' key and the included media will be fine.
You can find drivers Windows 7 x 64 for the 660 here:
http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-660 -
BSOD after installing Toshiba VAP for Win 7 - Satellite A200 - 1 m 8
Hello. I have Toshiba Satellite A200 - 1 m 8
OS: Win 7 ultimate 32 bitAfter that just install toshiba value added package to get my work function keys, eveytime I hit the FN key alone or with its related key
I get a BSOD screen message where it says: IRQL_Less-or-not_equal. and I can see at the bottom of the memory physical dump of the bsod screen page and a counter or timer.any help is appreciated.
Kind regards.
And you have installed THIS version?
-
HP Pavilion Notebook - 15-p247: victory of Downgrade 8.1 for win 7
Hi all
Straight on the question - I was wondering if it is possible to downgrade my HP Pavilion Notebook - 15-p247sa (ENERGY STAR) for Wndows 7 - currently it uses Windows 8.1
My main concerns are:
-is the productivity of my laptop using windows 7 will be the same as windonws 8.1 or slower?
-will I find drivers for my machine under win 7?
Thanks in advance )
Hello:
Here's the rest of the drivers you need. You don't need those where there was! brands next to devices.
Ethernet controller:
This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.
File name: sp68947.exe
PCI Simple Communications controller:
SM Bus controller: Note: first install this driver and restart.
This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.
File name: sp68711.exe
(USB) Universal Serial Bus controller:
ACPI\HPQ6007:
This package provides the HP 3D Driveguard software (HP ProtectSmart hard drive Protection) for the laptop models running a supported operating system. HP 3D Driveguard protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.
File name: sp67280.exe
High definition Audio Device: download and install the first file in the list. This is part of the graphics driver.
Realtek audio:
This package provides the driver for the Audio Realtek High definition (HD) in the notebook models that are running an operating system supported.
File name: sp69618.exe
Mouse/Touchpad:
This package provides the driver that allows the Synaptics TouchPad in the notebook models that are running a supported operating system. The pilot turns the touchpad General (for example, double-click and scroll) feature and provides a user interface.
File name: sp69001.exe
-
After decommissioning dv6-3240us for Win XP need driver ATI Mobility Radeon HD 4250 graphics card
I have XP Pro loaded on laptop - have tried video drivers proposed in the guide difficult - none seem to work - still have yellow? and VGA compatible indication. More funny thing is there is no video adapter listed in the Device Manager? I could use help getting a video driver for downgrade XP - any help appreciated
Hello:
There is no missing separate device listed as XP installed a generic VGA adapter.
See if this HP AMD Mobility Radeon HD driver unmodified for XP will work for you:
If it does not automatically install, try to install manually from the Device Manager. Click on the VGA card. Click the Update Driver button driver, select the manual method browse to locate the driver. Go to C:\SWSetup\sp49572 and see if the driver load in this way.
Paul
-
downgrade from drivers for win 7 for laptop HP 15-g007sl
Cool!
My great-grandfather came to the USA of Castelbuono and my great Grandma and Grandpa were of Ragusa.
Here is the link to the wireless card driver you need...
You should be all set now.
-
I deleted my volume control, need to reinstall
original title: VOLUME CONTROL ACCIDENTELLEMENT DELETED of NEEDS FOR RESTORING IT.
SOMEWHERE I MUST HAVE DELETED MY VOLUME CONTROL PROGRAM MY SPEAKERS ARE PLUGGED IN AND BUZZ, BUT IT IS THERE HAS NO ICON ON THE BOTTOM RIGHT OF THE CLOCK OF TIME TO ACTIVATE THE ON/OFF/UP/DOWN. IT'S BEEN ABOUT 3-4 MONTHS NOW AND I TRIED TO RESTORE MY COMPUTER BUT MY RESTORE BACK AS FAR
Hello
I suggest you try the steps from the link below and check if it helps.
Method 1: Volume icon is not displayed in the notification area, and you may receive an error message when you try to add: http://support.microsoft.com/kb/319095
Method 2: I also suggest that you install the updated drivers for the soundcard on the computer by visiting the manufacturer of the sound card and check if it works.
How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658
For your reference: Description of Notification area settings.
http://support.Microsoft.com/kb/279771
Hope this information is useful.
-
Re: Downgrading satellite A210-1AS from Vista to WIN XP
I have a desktop computer is fully functioning and a barely work Equium A210-1AS I Avanquest Fix - It 10 works well on the desktop. I installed the Fix - It 10 over satellite and after a day or if the computer crashed. It would start and after the endless restore operations and the uninstall of a program is not necessary and Fix - It 10 computer sort of works with a particular message. I was too mean a charge of £30 for a recovery disk for the Equius which has Vista Home OS. Now he is a true OEM CD of WIN XP I have in my possession. I bought and used on a desktop computer that I finally took to the discharge of the Council when it has stopped working.
Can I create a CD with all the drivers XP downloaded from the Internet just boot to the top with the WIN XP disc and then insert the driver CD?
I think I could activate WIN XP by phone and explanation. Would this work and what are the difficulties? I can't save all data.
BTW, I like XP and don t like Vista!
Thanks for any help,Hello
If you have win Xp drivers for your model:
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jspYou can install Windows Xp, and one more thing is AHCI driver during the installation of Windows XP
http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htmYou may, integrated into the Windows disc. You can also affect compatibility mode in the Bios (sata controller).
If you have more questions, ask... Try to help.
-
FN keys and volume control does not not on Satellite A210-131
Hello
I have a Satellite A210-131 for 3 days now, and the FN keys do not work. The numeric keypad using FN works fine, just the F1-12 combined with FN do nothing. I have the latest drivers and utilities from the website...In addition, my touch volume control works quite stupid, it takes less than 20 seconds to set and then its way too hard... I always have to go to the sound control menu to change...
Help, please!Hello
It's very strange. Usually, if you press the FN key and keep down flash cards must be indicated at the top of the screen. Please try to restart flash cards: start > all programs > TOSHIBA > utilities > restart Flash Cards.
I don't know what the problem with the touchpad and the control volume but friends Satellite X 200 (the same tablet like on your A200) works well. Problem described is quite strange, and to be honest, I don't know.
-
Equium A210-1AS - it gets hot after BIOS update
Hey, I was wondering if anyone can help here...
Currently have a Toshiba Equium A210-1AS with BIOS version 1.80 worm 1.00PARTTBL 08/04/2008.
Given that BIOS has been updated for a long time in this version 1.80 the computer became hot very quickly and therefore the laptop performance declined.
I looked on the Toshiba support site and upgrade only version 2.00 was not compatible with this laptop.Any help would be greatly appreciated. Short model number is PSAFJE
Thank youHello
I checked the site Web of Toshiba and I didn't see any BIOS update for satellite A210 PSAFJE. This means that an update of the BIOS was never marketed for this laptop, normally.
To me it sounds like that you have updated the BIOS with one version for another Equium A210. So, you should go to an authorized service provider. Technicians can install the right version of BIOS for you (downgrade).
Good bye
-
Equium A210-1AS - after update BIOS screen no longer works
I tried to find the same problem but impossible.
I had to reinstall Windows Vista after mistakes with programs (recovery was useless so install fress was necessary) and everything worked fine. I downloaded all the drivers and updates section of drivers Toshiba, I installed the ATI graphics driver, then update the BIOS.
While the closed laptop, now when I turn it on, the fan on the works of graphics card, battery, power and load turns on but the screen remains off (not illuminated). I tried an external monitor and the same problem again. As the screen worked fine until the update im guessing its something that the BIOS has done, or the graphics update.TOSHIBA SATELLITE A210 - 1AS
PSAFJE
-AMD Turion 64 X 2 Dual-Core Mobile Technology TL-58-
Genuine Windows® Vista® Home Premium edition-
DVD Super Multi (Double Layer) drive-
2 048 (1 024 + 1 024) MB of RAM DDR2 (667 MHz)-
15.4 "TFT display 1280 x 800Thanks to all who can help.
To me, it sounds like the update of the BIOS's not on your laptop. If the BIOS update fails more often than computer start doesn t more you can see anything on the screen but you can hear the fan, etc.
In any case, you can try this workaround: remove the battery and the AC adapter. Wait an hour and then reconnect the two devices. Now try to start Notepad and hope this works ;)
If it doesn't work, you should contact the nearest authorized service provider. Technicians can try to reflash the ROM module
Good luck!
-
Volume controls on the keyboard after the upgrade to Windows 8
I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory. After the upgrade to WIndows 8, the volume controls no longer work. I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.
In the following device manager are listed under keyboards:
HID keyboard device
Keyboard 109 MCIR Microsoft eHome
Keyboard MCIR Microsoft eHome
Microsoft eHome key remove control Keayboard
PS/2 standard keyboard
Any report that they are installed and are working correctly and that the drivers are up to date.
Has anyone else seen or solved this problem with a Touchsmart computer?
The instructions below were provided by HP support. This has restored the function on the keyboard volume controls. The referenced below drivers are drivers IDT high definition Audio Device. I am not sure that it was necessary to reinstall the audio drivers. It can only had to remove the USB dongle and back to restore the functionality of the button. Note: the USB dongle is located behind the VESA Panel to the back of the PC. No tools are required and the dongle can be removed and replaced without shutting down the PC. VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.
Instructions received from HP:
Please go to the following link and check the "return of the system", article #7 is the USB dongle:
http://support.HP.com/us-en/document/c03026390
After you have reinstalled the receiver, please download and install the following driver:
Then install the following update:
Maybe you are looking for
-
iOS 9.3.1 no longer send pictures through text messaging?
Just downloaded iOS 9.3.1 and now I can no longer send pictures through text messaging? I can take a new picture and send it, but I can't choose library, take a picture, press the button CHOOSE, but no image send? Anyone else having this problem?
-
Firefox doesn't save and exit, and aid does not tell you what settings to change!
When I go out Firefox he used to ask me if I wanted to save and exit. Since I upgraded to 4.0, it is no more. Now every time I have quit and restart, I need to set up my tabs again!
-
At my camera is nonsense just about me?
Whenever I try to go in my camera or camcorder it restarts to the motorola screen and back to the top. tried the master reset turn market, tried, tried to reset feature. This is leaving me to believe the phone itself is defective and I would exchange
-
Installation of WWLan need help with i7 8560w
I recently installed the WWLan module with SIM card and try to use it BUT...As I start the laptop, it displays an error message that new hardware not supported and therefore is disabled. I'm amazed if the hardware does not support it so what hell the
-
How long Microsoft supports Windows XP?
Original title: Windows XP How long Microsoft will support XP because they do away with it?