Issue scan fingerprint with Win 7 and Satellite Pro A300

Similar Questions

• Fn keys do not work with Win 7 and Satellite M100-221

  All greetings.

  I apologize for the English :)

  Established on M100-221 Windows 7 laptop, downloaded all the drivers of a site under the given system, updated the bios to version 5.6, but fn + F1 keys do not work...

  The if on fn key press turns on, but in a combination with F1... Does not work.
  Ask what to do.

  Thank you.

  Hello

  I'm not very well if you get the FN m current buttons on this laptop computer as part of Win 7 because it s an older series.
  But to my knowledge the FN buttons are controlled by the Support of Flash memory card utility.

  Please check the driver series L500 area.
  You will find the Support of Flash Card Utility and VAP (value added package).
  Install first the PPV then Support of Flash Card Utility

  Usually, it should work...

• Need help with installing Linux on Satellite Pro A300

  Hello

  I would like to install Linux on my laptop and am wondering which is the best distribution I can use and is it simple to follow guide to use so I'll get to the top and running with a dual boot with Microsoft Windows Vista?

  Please help because it is really important to me!

  Appreciate your help in advance.

  Thank you
  Bill.

  Hello

  To be honest I didn't install Linux on my laptop with Vista and XP.
  Sometimes, I use Linux Live distribution called Koppix, and I m satisfied!

  The devices have been recognized, and most of the drivers were included.

  Maybe it s an option for you too

  But Ubuntu might also be interesting for you.

  Check this box:
  http://www.Ubuntu.com/

• Satellite Pro A300 - 1 5: control buttons don't work & question ATI Catalyst

  I have some problems with my laptop Toshiba Satellite Pro A300 - 1 5.

  My keys (5 buttons) are useless!
  I can't put on mute stop, or change lanes.

  I don't know what to do! I installed the drivers from the toshiba Web site but I can't use the buttons.

  Another problem is with my video card.
  I can't turn on my controller of catalyst. My driver is ok but the catalyst is damaged!

  And another to my video card my laptop doesen't recognize my screen!
  It displays "Multiple monitors", I don't know if you know what I mean...

  Pls... suggestions... :(

  Hello

  There are several questions and perhaps the best solution for you is to install the new OS by using recovery image. I know, it's more radical but the simplest method. After 30 minutes, you must again factory settings and everything will work correctly.
  I'm sure that everything worked fine at first.

  If you want to fix this only solution is to reinstall the value-added driver package and display, and hope that this will help.

• Satellite Pro A300 PSAGDE Touch pad and fingerprints fingerprint sensor problem

  I have been runing Windows Vista on my Toshiba Satellite Pro A300 PSAGDE. Because my original Windows Vista key has been blocked I did a system recovery CD Toshiba vith XP. Everything work fine except the fingerprint sensor and the touchpad. Manager access suite said he couldn't connect with equipped and the driver touch pad in the taskbar icon shows but it seems to be inactive. The touchpad does not work even though I have pres FN + F9.

  What should I do to save this problem.

  Sory for my bad English, I just form Slovenia, I hope you understand.

  Somehow the material is not properly recognized.
  It will be interesting to see if the fingerprint sensor and touchpad may work with Vista preinstalled originally.
  I think that Alex is right. Contact the nearest Toshiba service provider and ask for help. They should check the functionality of the hardware.

• Satellite Pro A300 PSAJ1E: Touchpad not recognized using Win XP SP2

  Hi all

  I just got a Satellite Pro A300 PSAJ1E, which is preloaded with Vista. It is also comes with a 'product' XP SP2 recovery CD I had to use because of some software work with Vista compatibility issues.

  Unfortunately, everything works well except the Touchpad, which is not recognized by XP at all (without entries, error or not, in the Device Manager).
  The "Recovery" of XP CD installed the drivers of the Alps and the Toshiba Touchpad utility (for turning on and outside), so it seems that it is supposed to work.

  It is activated in the BIOS (which I have also flashed to the latest version, just in case) and is enabled in the software. I also rebuilt the laptop using the "Recovery" CD (the touchpad is not also recognized by starting on the CD "Recovery" which I guess uses WinPE).

  It does not work on Vista, so it shouldn't be a hardware problem.

  Someone at - it ideas?

  Thanks in advance.

  Andy

  Hey Buddy

  Well in your case I would recommend going to the Device Manager and remove the touchpad in the list of devices.

  Then visit the European driver Toshiba page, choose your model of laptop, Win XP OS and download the driver for the Alps Electric and Synaptics touchpad.

  Install both drivers, reboot the laptop and check if your touchpad will work correctly.

  Good luck

• Satellite Pro A300: Problem with Microsoft Security Essentials

  Hello

  I have a Toshiba Satellite Pro A300 with XP SP3 and now deleted AVG Free and installed Microsoft Security Essentialls (MSE).

  The result is after installing MSE and begin my laptop cursor is stuck in the center of the screen and will not respond to the inputs of the mouse or the keyboard.

  In aid of F12 to get my startup options allowed me to try the Safe Mode and last known good Configuration etc but they all show the same functionality, IE freeze when the desktop appears. XP seems to be operating in the background, for example system clock stays on time, "notice" system if its wifi singal is removed etc.

  Just to make the day to try to do an OS reinstall pressing 0 to on has no effect - system just boots in XP - so I can't my recovery partition!

  I have now is not a HW problem as the /kbd cursor works if I boot into a non-windows system, for example UBUNTU CD

  Any suggestions welcome - such as can I download a recovery on antother PC CD and burn a recovery CD?

  Hello

  I have no idea what happened after installing Microsoft Security Essentials, but it seems that you are not able to access the files on the HARD drive
  I think you need to reinstall the operating system using HARD drive recovery.
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  But this would format the system partition :(

  In order to save the files from the HARD drive, I recommend using / boot from a bootable floppy from Win PE.
  Win PE (also called BartPE) is a thin window OS that is bootable CD and don t need to be installed on the HARD drive.
  http://en.Wikipedia.org/wiki/Windows_Preinstallation_Environment

  Select this check box.

• Re: Satellite Pro A300-1EA: can I use faster and bigger HARD drive?

  So this may seem like a stupid question, but if I intend to spend of the installed 160 GB 5400 RPM HDD of the Satellite Pro A300 1EA to a 7200 RPM drive HARD (do not know the ability yet) and I was wondering how to make recovery disks (downgrade from Vista professional and XP Professional) coming with the work of the laptop with the HARD disk that does not part of factory as drives for my understanding restore the system...

  The size of the drive HARD replacement has something to do with the thing?
  If the replacement HARD drive is also 160 GB system see the difference? And even if it was smaller or larger the system see the difference?

  I have not even bought the laptop but will soon and it is a little urgent.

  Computer thanks Fellows ahead! :)

  * Oh... It seems that this question has already been answered... a little research has ever killed forum person huh... but if someone has vital information about the issue... Please let me know! :)*

  Post edited by: Carpathia

  Hello

  I think that he should t be a problem with an upgrade to a faster and bigger HARD drive.
  But before you switch the HARD disk, you must create the Toshiba Recovery DVD using the Toshiba Recovery Disk Creator.
  After the recovery disk has been created, you can move the hard drives.

  Best regards

• Re: Satellite Pro A300 - program to test the motherboard and memory

  Hi all

  Could you please suggest a program to test the card mother of my laptop Satellite Pro A300 and problems of RAM on reliability and compatibility.

  Thank you.

  Hey Buddy,

  There is no software tool to test the motherboard. This is possible with special Diagnostics of an authorized service provider.

  But for RAM, there are several that Memtest86 diagnostic tools. It s based BACK of diagnostic tools that checks all areas of memory with different methods. Freeware tool is really nice that you can download here:
  http://www.Memtest86.com/

• Satellite Pro A300 - driver Webcam cannot start under Win 7

  Recently bought a satellite Pro A300 and immediately updated from Vista to Win7 Pro Bus.
  Do not use webcam before upgrade.

  After upgrade, after downloading and installing the Toshiba Chicony webcam software, continually get message "Webcam driver open fail." "Please restart camera or computer.
  Camera appears in Device Manager and says driver is a Microsoft 6.1.7600.16385 driver v dated 06/21/06 (very pre-Win7!).

  Have you tried unistalling/reinstalling software camera assistant with and without first uninstalling the program camera in Device Manager, but the same error message comes back every time. I would appreciate suggestions for a fix.

  Hello

  In your case, I would try to install the latest driver for the webcam of Toshiba. Install this driver and try again. Also, make sure that this latest version of the BIOS is installed for your laptop.

  In addition, it would be interesting to know if the same problem happens on Vista. You should try it with the factory settings. So that you can identify if it s a hardware or software problem.

• Need help with the installation of Windows XP Home on my Satellite Pro A300-1DZ

  Hi all.

  I have a Satellite Pro A300-1DZ system unit, model no PSAG1E-OOFOO4EN (think they are 'o' and not '0', circle with slash through it) with WXP Pro.

  I recently contracted a virus inside and as he removed, however it is not good so I want to re - install Windows XP Home edition. I backed up the computer, I have a Windows XP Home SP2 Pro edition disk and I have my product key.
  I put the CD/DVD in BIOS to run 1 drive and tells me that I can boot from the CD, I press a button and it loads the CD, select the option where to install windows.

  BUT! I can t go further than what windows does not detect the HD said he s not now, or whatever.

  My question is this: Please can someone me step by step instructions on how to reinstall XP and a link to all the drivers I need to make it work?

  PLEEASE!

  It's simple on my PC, also, please keep in mind, I am best suited for working on cars, I'm not stupid, but my calloused hands search for computers a little more difficult than Motors please not in many computer technical terms.
  I myself am the slow education in the dark arts of computers. LOL :)

  PS. the laptop has a Vista Basic sticker on it, but it is certainly the XP pro operating system. :)

  Hi jeff

  Here's your solution:
  1. go to bios with F2 when you see the toshiba start screen.
  2. Select the arrow to the left using the "Advanced".
  3 press down until you get to "SATA Controller Mode".
  4 change, using F7/F8, Chang [AHCI] setting [compatibility].
  5. make sure the CD/DVD drive is the first to start and F10 save and exit. computer restart when you are prompted to "press any key" press a button and hey presto as before windows will start the installation, but this time you won't get windows you said:

  Set up did not find Ant hard disks installed on your computer.

  Make sure any drive HARD are powered on and properly connected to your computer and any hard disk related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.

  implementation cannot continue press f3 to goto hell... uh I mean leaving the installation

  And you can continue on your installation of Windows XP Home edition.

  Hope I helped many other jeff's in the same boat. XD

• Satellite Pro A300-2CW - necessary with Windows XP recovery disc

  I have a Toshiba Satellite Pro A300 2CW. I bought it with the software Windows XP (included in a CD), which worked perfectly for years. I reinstalled several times this year, but now the CD has deteriorated and it no longer works.

  The machine was originally WIndows Vista installed with the option to create DVD recovery and a recovery of HARD drive option, but I think that it is not possible for Windows XP.

  Do I have any options? Where could I buy the original Windows XP CD?

  Thank you

  Hello

  You can try to order it on https://backupmedia.toshiba.eu/landing.aspx
  Otherwise you can install the clean version of Windows XP Home edition. All drivers of Windows XP Home edition, utility tools announcement can be downloaded from Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• Satellite Pro A300 PSAG9E - Win 8 upgrade questions

  I decided to update my old Toshiba Satellite Pro A300 PSAG9E-00700TTE Vista to Windows 8.

  After two tries he has been successful. Vista made me mad, and when I decided to give my son, I wanted to work better.

  Toshiba doesn't seem to be willing to support the old models. (over 3 years).

  I can not even find this model code in the lists, the site does not seem to recognize the serial number.

  This is why all the Windows 8 upgrade tools provided are not relevant.

  I met a few minor problems before, but the Toshiba Turkey never replied messages, even those concerning the new products when I considered buying a new laptop. In the end I went for an Asus, which exceeds my expectations.

  I don't expect all support this time either, because of past experience. But I still want to try one last time.

  Is there a way to get the material in this workbook in Windows 8?

  > Is there a way to get the material in this workbook in Windows 8?

  Satellite Pro A300 is not that win 8 supported means that you will not find to win 8 drivers for this series, but of course, you can use Win 8 on this unit.

  In some cases, the municipality of Win 7 drivers would be compatible.

  Toshiba tools like VAP (value added package) to win 8 can also be used, but we must look for a Win 8 VAP released for other more recent models.

  Touchpad driver can be downloaded from the page of the Synaptics driver also other drivers like LAN or WLan can be found on chip manufacturer pages.

• Satellite Pro A300-28R - Windows startup with a wrong display resolution

  OK so I have a Toshiba Satellite Pro A300-28R with Windows 7 64 bit and an ATI Mobility Radeon HD 3470 graphics card.

  Recently, I have connected my laptop to a TV using the S-video connection. It worked well. The problem is that since then, and every time I start my laptop Windows starts with S-video of 600 x 800 display resolution.

  I tried changing the settings in the Panel and using the ATI CCC, having once selected and applied these settings, but whenever Windows starts now it starts with the above display resolution.

  As a result, I've also uninstalled and reinstalled my display driver both package Toshiba value added but the same problem persists. I searched with Google about this problem and have not been able to find something useful.

  Any help would be greatly appreciated.

  Hi dude

  How did you produce the video signal?
  Did you choose Office expanded or all simply the option external monitor by using the FN + F5?

  I think that you need to press once more the Fn + F5 and should switch to a view, internal laptop display.

  Please check if this could help you!

• Satellite Pro A300 PSAGDA-02000R CPU and graphics chipset mismatch

  can someone help me with the specifications of this laptop.

  When I look at the official brochure of toshiba for this product, he mentions that the Chipset of the CPU

  "Mobile Intel 965 PM Express Chipset.

  but the second video card says

  "Intel Graphics Media Accelerator GM45.

  Which is true, because what I read on the site of intel GMA X 3100 is used on the mobile 965 PM Express Chipset.

  Any help will be much appreciated.

  To be honest, this unit is not known to me, but I know that some other Satellite Pro A300 supports other chipsets.
  For example:

  SATELLITE PRO A300 PSAJ1E-005008BT supports the Intel GM965 chipset and graphics chip Intel GM965
  SATELLITE PRO A300 PSAJ5E - 001001GR is supported by the chipset Intel PM965 and ATI Mobility Radeon HD 3470
  SATELLITE PRO A300-1E7 PSAGDE-003003EN supports the Intel PM45 Express and ATI Mobility Radeon HD 3470 Mobile Chipset
  SATELLITE PRO A300-1HF PSAG1E-00K00SIT supports Intel GM965 and Intel GM965 graphics chip as well.
  SATELLITE PRO A300-21 b PSAGDE-01S007A3 supports the Chipset Mobile Intel GM45 Express and ATI Mobility Radeon HD 3470.

  As you can see there are many different laptops with hardware components completely different models
  I googled too, and it seems that the PSAGDA Satellite Pro A300-02000R supports the PM of Mobile Intel 965 Express chipset and graphics ATI Mobility Radion, HD 3650 with 512 MB + Intel Graphics Media Accelerator GM45.