Issue SimplePass + password
Hello
My problem is the following:
I connect to my pc through my fingerprint (SimplePass) and there is also a regular password but I forgot that, so now I can only connect my fingerprint. I wanted to delete, to be able to connect without a password, or so, but I couldn't do it without the password. Is there a way I can fix this?
Thanks in advance!
(I have a Pavilion dv6-3180sp with win7 on it)
Doll,
There are ways to solve the problem of password, some of them more or less boring than others.
===================================================================================
- You need a path of your computer; If possible, please proceed as follows now:
Assuming that you have administrator privileges, the first thing you could do is create a new account and give the new account privileges hasdmin .
Grant the account again a good password that you can remember. Note the password if you need to put the password in your safe. (Do not let the password written sitting on your desk...) You do not need to bind the new account in signatures Analyzer.
It is your insurance and you make sure do you not get locked on your computer. Keep the account on the computer. Don't use it; can I connect occasionally to make sure it works.
===================================================================================
- Lost password recovery methods:
Windows 7 - bypass of forgot password?
The document above prompts the user to use method n ° 3 of the Vista site:
---------------------------------------------------------------------------------------------------------------------------------------
- This following link comes from the PC Support and explains some tips and methods to guess the password or retrieve it using various tools you can use.
I forgot my password of Windows 7! Is there anything I can do?
---------------------------------------------------------------------------------------------------------------------------------------
- Two methods recommended by our Experts in the HP Forum:
Account lockout - Password recovery message by DavidPK admin
By REO51ST
You forgot the administrator password? The sticky keys trick
---------------------------------------------------------------------------------------------------------------------------------------
Good luck!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
See a Post that is useful - or who teaches you something you didn't know?
See something that makes you smile?
Click on the star of congratulations! It is a nice 'Thank You' for the author.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Tags: Notebooks
Similar Questions
-
Update worm 30 does not my HP SimplePass (password fingerprint reader) to Invoke
Aargh... Just discovered another problem with this worm update. 30 my SimplePass (HP program, not an Add on Firefox) does not work. When I go to a site that requires a password, SimplePass opens and asks me to drag my fingerprint reader... I'd really like to get this working again... It still works on Internet Explorer...
I'd appreciate any help, thank YOU!
Firefox 30 switched many plugins "Always turned on" to "ask to activate. This change was to require your permission to untrusted sites to use plugins. However, some plugins like HP SimplePass affect the user interface, so that they do not work well with this setting. Here's how to switch back:
Open the page modules using either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click on Plugins. Look for the plugin SimplePass and change to ' activate ' "always enable".
It may not take effect immediately in the current window, but should work in a new window, or after you exit and then restart Firefox.
Does it work?
-
Had to do a reinstall on my MacBook (10.4 ish) and now I discover this problem of CS2 activation server. My problem is my old apple ID was based on my old post, and I don't remember the password. In this ID email address no longer exists so I can't send them me a new password to it. I have the disc and the original series.
Create a new id, adobe, using your current email address, so you can connect to adobe.com (which I think you have already done or you wouldn't post here).
-
I got a Xbox live account for my brother, but security issues and password do not work
Hello
What operating system is installed on the computer?
You should contact the Support technique Xbox for assistance.
http://support.Xbox.com/en-us/Hope this information helps.
-
Hello
I recently changed the password for the connection on my main account on my MBPro and added a firmware password, but that doesn't seem to work properly: whenever I reboot Keychain keeps asking me to access the local keychain and all iCloud apps are disabled. I also have problems with pictures. FYI my boot HD is encrypted with FileVault.
I put details on the issues below, as well as what I tried so far (based on the collected suggestions from these forums) as well as some newspapers Console elements that seem strange.
I don't know how to proceed at this point that some options might make things worse if not done does not correctly (or in the right sequence). I'm tempted to disable Firmware password, go back to the old password, or turn off FileVault to see if the problems goes, but I'm afraid it might make things worse (and I would like to have these features runs later). I also have the opportunity to reinstall the OS and return to a previous TimeMachine upward.
I would appreciate anyone's help on this one.
Thank you very much.
DOM
Plug
MBPro Core i5 2.7 Ghz 13 "retina
16 GB RAM 256 GB SSD + 2 TB external HD.
Mac OS X 10.11.16 (15-1004)
FileVault is running on the boot disk (SSD).
Firmware password has been set.
I have a Time Machine backup (on a second external hard drive).
I installed a functional copy of Mac OS X on an external hard drive 3.
I do not use iCloud keychain.
I have another admin account that works.
Problems:
(1) Keychain: whenever I start the CommCenter ask the session keyring password (I must then enter the previous admin password).
I wonder then if I want to update the local keyring: to do this I have to enter my new login password in the "current password" and then I type the same new password fields. Once I reboot the problem reappears: exactly the same sequence, as if the information could not stick. Might have something to do with the FileVault and Firmware password.
(2) iCloud: after having rebooted and enter my passwords from keychain as described above, none of the iCloud applications work (email, Messages, Contacts, calendars, reminders, Notes, find my Mac, iCloud drive, etc.).
He tells me tells me he is not able to connect to iCloud and asked me to try to do it in the preferences panel. When I tried to connect there, he couldn't connect to iCloud and told to try again later.
(3) photos: at the launch of Photos he says he cannot open the library system and propose to choose a. When I choose the right pair, it opens fine, but a ton of photos are most referenced correctly. All images come my an external HD (the iPhoto library is also on the same HD), and nothing has changed in the structure of folders.
What I tried (after the Time Machine).
1. I installed Mac OS was last updated.
2 - I activated the guest account and tried to connect: it only works Safari.
3. I logged in using another admin account: no problem with Keychain and all iCloud apps work. Not tried Photo since this account is not a library and is not configured for access to the main account.
4. I tried to boot into safe mode: is not work (might have something to do with the password FileVault and Firmware).
5-return to the main account I ran disk help and fixed permissions: discs seem to be ok.
6. in the key string App I locked and unlocked keychain using the lock in the upper left corner of the application. When asked for my password I just typed my user password. When I rebooted I had the same problems.
7. I've tried updated the password in the keychain app by entering the old password and then my new password for connection in the other two fields (new password and confirm). Still problems with iCloud and after restart I have the same problems of Keychain.
8 - I tried resetting my default keychain: I got an error, because I don't have the permission to do so.
9 - I tried to create a new keychain session and making it the default keychain, but I keep getting the same problems (iCloud does work does not + issues of password even after I reload).
10 - iCloud: I tried to close the session from iCloud, then enter my iCloud ID and password, but it says no more: it cannot connect or that the Mac is already connected to this account. I closed the session again, iCloud used Safari to manage my AppleID (https://appleid.apple.com/), listed devices associated with and my MacBook off the list: I always have the same questions even after reboot. I even tried to delete the iCloud account since the Internet Accounts preferences panel, but it is not listed. I tried to add it, but he said that the Mac is already connected.
11. in Terminal, I glued the special order in some discussions (find ~ $TMPDIR..------(-+ flags sappnd, uappnd, schg, uchg o! - user $UID o! - perm - 600-) 2 > & -| wc-l | pbcopy) and got 21 to 22, and a result the first time earlier.
12 - looking at logs just console after reboot, I see a couple of things that seem odd that appear multiple times with slight variations (I paste only an example):
Sandbox: launchd (1) system policy: deny (1) file-writing-break the/private/var/run/dyld_shared_cache_x86_64h link
HideUntilCheckIn of the property is a problem of architectural performance. Please transition away from him.
sharedfilelistd [356]: [default] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentApplications. SFL with error error Domain = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentApplications.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentApplications sfl NSUnderlyingError = 0x7fd93a70ec20 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}
[NetworkDefaults]: cannot write new default values of network disk: error Domain = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"networkDefaults.plist"in the folder"Géoservices"." UserInfo={NSFilePath=/Users/Marc/Library/Caches/GeoServices/networkDefaults.pli st, NSUnderlyingError = 0x7fb1dbf69530 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}
Keychain Circle Notification [448]: Displayed at the launch:)
)
securityd_xpc_dictionary_handler Keychain circle [448] DeviceInCircle error Domain = com.apple.security.sos.error Code = 4 "Keybag never unlocked, ask after first unlock" UserInfo = {NSDescription = Keybag never unlocked, ask after first unlock}
iconservicesagent [381]:-[ISGenerateImageOp generateImageWithCompletion:] has no image descriptor composit of < ISBindingImageDescriptor: 0x7fbfe36118a0 >.
accountsd [384]: [warning] Services all gone, delete all accounts
SpotlightNetHelper [420]: __tcp_connection_tls_session_callback_write_block_invoke.434 tcp_connection_tls_session_error_callback 12 22 error
Quicksilver [470]: Error resolving alias file:///Volumes/ABC/DEF/GHI.JPG%20alias: error Domain = NSOSStatusErrorDomain Code =-35 ' nsvErr: no such volume.
Sandbox: SpotlightNetHelp (420) deny (1) - reading-file data/Applications/App Store.app
(This repeats for many applications and their content files)
12 - looking logs console after entering my iCLoud references (in the prefs ICloud panels) I get at least about the error that is similar in the newspapers after the reboot (cannot save SharedFileList)
com Apple.Preferences.iCloud.RemoteService [512]: error = AKAuthenticationError Code =-7034 '(null)' Domain: AKAuthenticationErrorForcedFailure
com Apple.Preferences.iCloud.RemoteService [512]: error in CoreDragRemoveTrackingHandler:-1856
com Apple.Preferences.iCloud.RemoteService [512]: error in CoreDragRemoveReceiveHandler:-1856
sharedfilelistd [283]: [default] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl with the error Domain error = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentDocuments.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl, NSUnderlyingError = 0x7f915242c1b0 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}
sharedfilelistd [283]:-[ListStoreSnapshot writeToFile:] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl with the error Domain error = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentDocuments.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl, NSUnderlyingError = 0x7f915242c1b0 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}
Keychain Access application for Keychain "login" after changing the password
The problems of Keychain - see post of khati
OS X always ask to use your passwords in keychain
Try to go into System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing.
Have you tried the signature to iCloud and then reconnect?
-
I had for my power on password. I had to reset the password to put in a new, so he asked an administrator password, I put the same one as my power on. I did upgrade to the sign on screen my password wrong one after awhile he ask my administrator password it will not be considered.
Hi @ds1218 ,
Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your laptop 15-r136 HP computer and issues with passwords. Here is a link to a thread you might want to look at.
Please let me know how it goes.
Thank you.
-
My wife's phone was last updated the operating system more recent 10.3.2. I then tried to access a service and found when he asked for the Blackberry ID, we had forgotten the issue of password and user. Then I deleted the ID and set up a new. I can connect to the new identification, but he cannot confirm on the z10. Then I thought to wipe the z10 back to factory setting. However; the z10 shows that BB Protect is enabled and we cannot turn it off using the passwords that we try.
I have logged on to the site of BB Protect and found there is no device associated with this Userid. Also, I find the screen for the current user ID name using our existing email address differs from the one showing on the screen z10 Blackberry ID. name I tried to change the screen name and password on the ID to be similar to the z10 site but it will not accept it.
So now I'm unable to wipe the z10, or change the ID info to make it usable when required. I also noticed, online, there are instructions for the new OS 10.3.2 informing us that no wiping ability to Protect is disabled. There is no instructions on how to so that when a problem arises like mine.
Help, please.
I searched for a solution and I finally found one that works. It was posted by asokhay about a week ago and is as follows:
"I found the solution!
I connected my passport for Blackberry link and clicked on "back up and restore" in the left navigation tab. Then I clicked on Factory Reset. He asked me to unplug the unit and when I did the wipe of security has started to happen. "
This works, however when I wipe the phone it took about 30 minutes. By reading this forum I found that some wipes can take several hours to complete depending on the amount of material is on the cell phone. As I could not ' t register anything before this wipe I have to start over from the beginning. " Fortunately my wife added very little to the phone, such as applications or photos.
-
HP SimplePass causes Firefox 30 fosseen.
I used it a bit in the past, and it's great. Unfortunately with Firefox 30, there is a gap in the address bar when he flew.
Delete the following folder solved the problem of the gap:
C:\Program Files (x86)\Mozilla Firefox\distribution\bundles\[email protected]
Now the software is disabled in Firefox, however. Here is the content of the original folder:
After you restart the system, the icon SimplePass both return address bar gap.
I should mention that, apart from this issue, SimplePass works perfectly and I did have other issues.
If someone is able to make HP SimplePass and Firefox compatible 30 without a gap in the address bar, I would appreciate it a lot.
So for now I fixed it! I don't know how it happened, but I'll let you know what I did.
I realized that the Web Log has been disabled in the HP SimplePass software, then I reactivated it. I disabled it just a few days when I started to have a problem. Then I went into the menu of Firefox and selected Plugins never activate. I restarted Firefox, re-entered the menu and choose activate. The icon was back, there is no space in the address bar and hit connections worked.
because everything seemed all right, I have re-upgraded to Firefox 30. I don't see the icon SimplePass, ditch or out with newspaper on the guests. Then I went into Control Panel and repair installation of HP SimplePass. I opened Firefox and seen the icon and saw the gap with any blow to open a session. I did the same thing as last time: deactivated and reactivated in Plugins.
Somehow that fixed my problems. If all goes well, it stays that way with a reboot. If this isn't the case, I'll report.
-
PT 8,53 expired password Causes Invalid access ID
People,
Hello. I've been running PeopleTools 8,53 Internet Architecture with Oracle Database 11 g 1 material and OS Oracle Linux 5 for awhile. PSADMIN connection in the browser of the user successfully. All applications run correctly.
A few weeks ago, I started an application server and received the error message as below:
"Password expires less than 6 days. Could not sign on user PSADMIN. »
I followed the tutorial of Nicolas http://gasparotto.blogspot.com/2010/03/psovm-sysadms-password-policy.html to do step by step below:
Step 1:
SQL > select username, ACCOUNT_STATUS, EXPIRY_DATE, PROFILE of dba_users;
His output: 10 rows back as below:
OUTLN Expired (Grace) 15 April 14 by DEFAULT
MYNAME Expired (Grace) 15 April 14 by DEFAULT
PEOPLE Expired (Grace) 15 April 14 by DEFAULT
PS Expired (Grace) 15 April 14 by DEFAULT
SYS Expired (Grace) 15 April 14 by DEFAULT
By default the SYSTEM Expired (Grace) 15 April 14
TSMSYS expired & locked by DEFAULT
DINH expired & locked down by DEFAULT
DBSNMP expired & locked down by DEFAULT
ORACLE_OCM expired & locked down by DEFAULT
As you can see above, the PSADMIN user isn't here. MYNAME is my ID of owner of Oracle database as well as the Linux login ID.
Step 2:
SQL > select * from dba_profiles where the profile = 'DEFAULT' and limit is not null and limit! = "UNLIMITED";
Its outputs: 5 rows back as below:
10 FAILED_LOGIN_ATTEMPTS DEFAULT PASSWORD
PASSWORD_LIFE_TIME 180 DEFAULT PASSWORD
DEFAULT PASSWORD NULL PASSWORD_VERIFY_FUNCTION
PASSWORD BY DEFAULT PASSWORD_LOCK_TIME 1
PASSWORD BY DEFAULT PASSWORD_GRACE_TIME 7
Step 3:
SQL > changing the default profile limit
Unlimited failed_login_attempts
Unlimited password_life_time
Unlimited password_lock_time
password_grace_time unlimited;
Its release: modified profile.
Step 4:
SQL > alter user MYNAME identified by MYNAME;
Its release: modified user.
I do the same for the PEOPLE, PS, SYS, SYSTEM and OUTLN user.
Step 5:
SQL > select username, ACCOUNT_STATUS, EXPIRY_DATE, PROFILE of dba_users;
Its outputs:
OUTLN, MYNAME, PEOPLE, PS, SYS, SYSTEM, ACCOUNT_STATUS for each one is OPEN and no expiration date.
Finally, I start application server and got the error in APPSRV_0422.LOG as below:
«GenMessage Box (0,0,M): database access code: access code invalid or password database Signon.» Server was able to start. »
I think that the access code for the database feature is PSADMIN but is not in the table dba_users.
In the configuration of the Application Server domain: UserId is PSADMIN, login Id is "people".
I see no error in the above 5 steps to solve the issue expired password.
My question is:
All folk can help solve a problem 'Access Code invalid or pwd for identification of the database?
Thanks in advance.
Hello
You can view the rest of documents
E-SEC: how to change symbolic ID. access, SYSADM password? (Doc ID 609603.1)
E SEC: 2 - Tier connection error "Invalid ID and password for Signon" (Doc ID 611500.1)
I will suggest you to exclude users of password control that starts the application server.
You can consult the following document
E-SEC: password controls can be specific user? (Doc ID 611621.1)
Kind regards
Sanjay Pandey
-
Encrypt the password and store at USR_PASSWORD IOM 11.1.2
Hi all
I have a requirement to generate a random password when creating the user and store in the USR_PASSWORD attribute.
I've implemented it using a pole and in the face of the slot event handler issues
(1) password is get stored in plain text in DB
(2) when this user is configured to any target system, get the decryption of password is not error.
(3) cannot connect to self identity service - console saying incorrect password
It would be great, if the password encryption procedure is shared (I want to encrypt it with the same key that IOM using by default).
Thanks in advance.Hello
You can use the encryption API.
tcCryptoUtil.encrypt (
, "DBSecretKey");
pass this value in the usr_password field. -
I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz
(HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)
I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.
While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.
10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.
I tried leaving it for a day or so and still nothing. There is nothing I can change in the configuration of the BIOS that works so far.
I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.
I don't know where to go or how to get beyond the screen of HP encryption. I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.
Can you help me?
Sorry... I missed the part that you have a license Win10. I thought you were trying to activate 10 using the OEM HP license and causing problems.
I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.
If it was my drive, I WIPE the drive of all its content and then again install Win10. A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/
Once your disc is clean, then simply install Win10 on it.
That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.
Good luck
-
How will I know my help email address?
We are setting up a family sharing but my date of birth cannot be changed because there is no guessing that my security questions writing this is to say that an email was sent to my address "rescue". What is an alternate email address and how do I know what it is? I have an iPad Air generation 5 and I am a couple of updates behind.
Emergency email address is an email address (used to reset security issues; and password reset emails will also contribute to this account) that you put on the account, probably at its inception (must be a single email account address, so it will not be the same as the main e-mail address) : on your Apple ID - Apple Support email addresses
If you don't remember what set (you checked folders Inbox, and spam on all of your e-mail accounts?), you will need to contact the Support of your country for the reset of questions: Contact Apple for the Apple ID account security support
If your country is not on this page, then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html
When they have been reset you can then view (and possibly change) the email address of relief for possible future use (see the first link above)
Or if it is available in your country, you can substitute 2-step verification: frequently asked questions about two-step for Apple ID verification
-
6 d to iOS 6.1.2 WiFi problem?
I'm suddenly having problems connecting my iPad4 and iPhone5 to my 6 d in connection Wi - Fi direct mode. I was not able to connect since the update to iOS 6.1.2 with either. I can still connect mode "infrastructure" If the device is connected to my work or home network everything first, but don't can't direct connection.
Someone at - he lived the same problem? Or anyone was able to connect successfully with iOS 6.1.2.
Thanks for any help!
Jim
My bad. Found a solution. I had to "forget network" on each device and re-setup of each of the configurations of device on the camera to issue new passwords. Could re - connect each device and bring then log in again.
Problem solved. Oh, one thing: if any of you have more than one device (I have an iPhone and iPad), you want to have two settings on the 6 d: one for each device.
Jim
-
Microsoft Silverlight send emails via my account that I did not send?
How Microsoft Silverlight is send emails via my account that I did not send, with the recipients cannot open attachments?
Hello1. who is the service provider of electronic mail to the e-mail address concerned?2. do you use e-mail clients (like Microsoft Outlook, Windows Live Mail etc.) to send and receive e-mails?When emails are automatically sent an e-mail address, it is generally a compromise e-mail address... I suggest to change the security issues and password of the e-mail concerned as soon as possible and contact the e-mail service provider for help on this issue.Hope this information helps. -
I have a problem enabling UPnP on my router BEFSR41 V3. Everytime I try to activate the default administrator password "admin" doesn't work anymore. I have to reset the router to return to the configuration web page. is there a version of the firmware that fixes this problem? I am currently at the level of the firmware 1.05.00. Thank you.
I keep running into this problem too. Did not know what caused
at the beginning, but it is VERY annoying. I didn't have to
Reset my router and reconfigure all my settings, once again, so I
had a look too and found that it affects the password
something weird like LowTek mentions in his post.For any future reference for anyone else running into this issue
the password it seems always the value seems to be:d 6 n w 5 v w x 2 d c 7 s t m 9 & # 6 5 5 3 3.
(without the spaces - sorry this forum is not format correctly and it allows no html formatting)
This is regardless of which password has been previously set so it
is it not a form of the old password.Hope this helps someone.
See you soon,.
Lack of firmness.Message edited by laxity on 2008-01-15 13:37
Maybe you are looking for
-
Hello I bought a new Tablet HP Signature of flow on the Microsoft Store online April 1. I registered it with HP shortly after I have received. Now the audit online guaranteed HP tool says it was registered on 10 November 2014 and the warranty expires
-
... The installation program will end now. For some reason, I lost my printers. None appear as installed. When I try an installation, I get this message.
-
Question about the State solid E 15 drive
I just got this laptop Amazon first day, and so far I love it. However, she supposedly has an 8 GB SSD and more 1 TB HARD drive, but I can't find any evidence of its existence. No other player is anywhere that I can see, even in disk management. My e
-
NTLDR compressed do not restart configure disk comes with blue screen with white lettering
an error crashed has been compressed ntldr tried to restart anything tried safe mode nothing if I get out of hard disk and I put in a new and buy windows 7 can use that new computer or is it worthless
-
How can I "freeze" my office in the places where I want that they?
Before you have to clean a virus off my laptop Dell Inspiron 1720, my office 'elements' were all willing how I need them to refer quickly to. Subsequently, at the present time, they do not remain in the positions I have place-upper left; top-right; i