Issue using the ink cartridges.

Similar Questions

• Use black ink cartridges into the two slots? HP Photosmart C4795 - no color cc = us

  Can I use black ink cartridges into the two slots? HP Photosmart C4795 - no color, to save money?

  Hey JJ - B,.

  You cannot use a black cartridge in both slots. The print head channels are different for print 3 colors in a slot vs only black print out on each other. Using black in the two slots certaining most will cause errors and possibly damage the printer.

  Is there a reason you want to run the two blacks to be with? You can still print with only the back cartridge installed.

  Good luck!

  Sean

• Re-install the partially used HP ink cartridges in printer

  Ask a question that I can't find an answer.
  I removed all the ink cartridges 4 of our printer HP Officejet Pro 8500 wireless last month because we bought a new printer.  There is still a significant amount of ink remaining in three cartridges, but they don't fit our new HP printer, so I sealed the carefully with adhesive tape on the distributors of ink and in Ziploc bags.  Can I now reinstall the HP cartridges partially used the printer from my father, who is the identical 8500 model, or I could create a problem any?  My husband warned that relocation could introduce air bubbles?  It only a month since they were out and sealed again.  Please notify.

  DianneSsalvation,

  You can certainly install these, previously used cartridges in your printer of fathers.

  Here is a document that discusses storage open cartridges and print heads. Nozzles crust if supplies are not kept in air-tight containers properly moistened and ink may wick of nozzles if anything in contact with them. If the cartridges or one of the cartridges does not work, it could be because it has dried up.

  I hope that answers your question. Thanks for joining the HP Forums.

• error message: "the printer is configured to use o2 ink cartridges.

  My HP C7280 all-in-one printer was purchased in Australia and was then introduced to the South Africa. O2 cartridges are not available in South Africa, the printer can be reconfigured to use the local cartridges?

  Hello FANaude.

  You must contact the HP support by phone in your country for assistance in obtaining the printer reset to accept cartridges from a different region.

  Use the link below to find how to contact HP phone support in your country.

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

  See you soon!

• OfficeJet Pro 8610: New printhead - printed without using the installer cartridges - want to use

  Has had a chance to offer a new free printhead when one would not accept my new replacement ink cartridges.

  Didn't I have to use new ink cartridges supplied with the new print head. On the contrary, kept all the cartridges no-SETUP, that I had just bought. Printer accepted them and printed a huge amount of things. Some of the prints seem too dark. Now the printer asks to change the cartridges and will not accept the cartridges SETUP.

  (1) is my printer not configured correctly because I haven't used the SETUP with the new print head cartridges?

  (2) is it possible that I can get the printer accepts CONFIGURATION ink cartridges so that I don't have to lose their?

  If the printer did not print installing cartridges and now you want to use them, it will not accept them. I'm sorry. Replace ordinary cartridges.

• printer 6510: can I use 934 ink cartridge in my printer all-in-one 6510?

  Can I use 934 ink cartridge in my printer of 6510 all-in-one?

  The cartridge HP black 934 works with these printers:

  HP Officejet printer, 6220
  E-all-in-one printer, HP Officejet 6812 range
  E-all-in-one printer, HP Officejet 6815 range
  Printer HP Officejet Pro 6230
  Printer HP Officejet Pro 6230
  E-all-in-one printer, HP Officejet Pro 6830 range
  E-all-in-one printer, HP Officejet Pro 6835 range

• How can I load the ink cartridges

  I have TouchSmart series D110 printer that uses 60 ink cartridges and I have Windows 7 on my computer and I need to know how to load the cartridges!   I can't believe the instructions are not in or on the packaging!  ????????????

  Hello

  It should come with the CD, or you can look at the #19 of this manual page.

  http://h10032.www1.HP.com/CTG/manual/c02106007.PDF

  Kind regards.

• e all in a single photosmart 6520: 6520 implemented of the ink cartridges

  Hello I recently had a new photosmart printer of hp 6520.  However the implementation of the ink cartridges were not in the box.  I was wondering if there was a way around it or if I would be able to get a new set of these cartridges in order to set up the printer so we can use it.   I registered and installed all the software.  the only thing I don't have is the cartridges of configuration to use it.   Thank you for your time

  Hello! Welcome to the @jbuckley21 forums

  I read your post on how your 6520 Photosmart did not include cartridges Setup. In this case, you will need to contact HP for the Setup cartridges sent to you, to install the printer.

  Please, give us a call:

  Call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  

• I can't go to my printer. It will not recognize the ink cartridges are full!

  My epson 7400 has not been used for 6 months. I cleaned and aligned the nozzles and it used 2 full cartridges. I installed new ink cartridges, and he says they are empty. Now none of the buttons work, it does not seem to recognize all commands. What should I do?

  Hello

  Turn the printer off

  Unplug the printer from the computer and the wall outlet

  Reinstall the cartridges

  Support all the ink cartridges until they snap into place to make sure that they are well housed

  Close the cartridge cover and push it down until it snaps

  Close the scanner

  Press on the Stop button to start loading of ink. It takes about 2 minutes.

  When the the light stops flashing and remains on, the ink load is complete

  	Caution:
  Never turn off the Epson Stylus CX while ink is in charge or you'll be wasting ink. If the ink light flashes, press on the Stop button and lower all the cartridges safely Manually clean the print heads Plug the printer into the wall outlet and the computer.  Turn it on and try printing again. Updates

• HP Color Laserjet M277n MFP: How to use the black cartridges only when the color toners are empty

  Hello team HP,

  I recently bought a HP Color Laserjet MFP M277n I printer I print black & white user only and really don't need color prints. How to set the printer options to print only black & white? How can I replace only the black cartridge when the color cartridges are empty? How many prints (approximate), we can take by toner?

  Kind regards

  Christèle

  Hi @Pavumba,

  Welcome to the Forums of HP Support!

  I understand you're wondering how to use black ink only on your HP Color Laserjet M277n MFP printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you wonder if you need to replace the color cartridge when it is low. This printer is a printer AIO, therefore, you need to replace the ink cartridge when it becomes too weak to be able to resume printing. However, if you print mostly in black, you can configure a preset black only to print in black and white. This would help reduce the use of the color cartridges.

  NOTE: Composite black - for black and white images and photos, a mix of colors called 'composite black' can be used to achieve the quality significantly improved picture and soft gray tones that can be achieved with only black toner. For users who want to print images using just black toner, many HP printers color customer offer configurable options allowing the client to print using only black toner. For example, by selecting "print in grayscale" in the printer driver Specifies print using black ink only. For more information about the use of the toner cartridges, please see this article: how the Toner is used.

   

• Replacement of the ink cartridges

  I bought two identical HP Photosmart printers.  One to my winter home and one for the summer place.  When I come back and back, can I remove the ink cartridges and bring them with me?  This will keep don't dry them out, while I'm gone.

  I had clogged the problems of print head with Epson printers.  The beauty of the design of HP is that the print head is part of the ink cartridge.

  What printer model? Some Photosmart printers integrate the print heads (IPH) and consumables, others have individual ink cartridges (IIC) with separate print heads.  For IPH printers it could make sense to take the cartridges with you *, this isn't the case for the IIC printers.  Be aware that the low on ink indicators will not properly work on the second printer that the printer know that the cartridge has been used but will have no way of knowing how.

  * When you remove a printer cartridges don't put tape on the cartridge nozzles, as this may cause damage. The best would be to use the "cellar" that comes with photo cartridges.  If this is not available, it is possible to put cartridges on their side in a Tupperware of size "sandwich" with a few layers of wet paper towels on the bottom.  Do not let the nozzles touch the sides or anything else, because this would cause damage, especially for the color cartridge.

• Photosmart 5510 model B111a: cleaning of the printheads used the ink!

  I cleaned my print heads. It took several times.  Now it's better, BUT all my NEW ink cartridges are nearly empty!

  Hi @mbburley,

  Welcome to the HP Support forum.

  I understand that you have a Photosmart HP 5510 printer e-All-in-one that needs to have the print head cleaned, and when the print quality was satisfactory the 'new' ink cartridges were nearly empty. I would like to help with that.

  Ink cartridges certainly get a little more impoverished every time that the print head is cleaned. Cleaning the printhead several times, can finally empty ink cartridges at the point where the printer requires that you replace the ink cartridge.

  Here is a document that we can follow in the future that can help you with the problems of print quality - fixing of problems print quality for the Photosmart HP 5510 e-all-in-One Printer Series.

  If the print head is badly clogged, you may have need clean the printhead several times to restore the normal print quality, but you should not use a complete set of new cartridges with a print quality problem.

  If you find that it is a recurring problem, I suggest to contact our technical support at the www.hp.com/contacthp/. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-Assis ANSI.org/access/access_t.html

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• printing with printer deskjet 2050 using the black cartridge only

  printing with printer deskjet 2050 using the black cartridge only

  all solutions? PLIs answer me. thanx

  Hi d33com,

  Follow the steps below to set the black ink only.

  1. open the printing preferences (step 1)

  2. click on the Advanced button (step 2)

  3. click on the drop down arrow next to the print in grayscale to change black ink only.

  

• OfficeJet Pro 8600 Plus fried by storm - how can I removed the ink cartridges

  A storm on the last week my OfficeJet Pro 8600 Plus feeding dish. The printer is irretrievably economic so I ordered a new printer.

  Without power, the transport of ink cartridge is stuck in extreme right position where it is impossible to remove the four ink cartridges relatively new. Ink is not cheap... would like to be able to recover the disabled printer ink cartridges but cannot understand how the cart release.

  Any sugguestions would be appreciated.

  In the end from the deceased by removving Assembly ADF/scanner printer ink cartridges. This provided access from the top to the distribution of ink stuck.  T10 Torx driver required to remove all.

  The new printer will not accept the cartridges retrieved when installing printer... had to use the "setup" cartridges in the box with the new printer.

  After you configure the new printer, however, I've been able to 'Set up' cartridges for almost new XL cartridges that I had recovered from my old printer.

• OfficeJet 7610 frequently performs maintenance printer minutes and using the ink

  Since I got this printer, he managed frequent printer maintenance pretty much everytime I go to print a page. That in itself would not be a total problem outside waiting, but it seems to use ink. I've printed a single page of color since I got new ink cartridges. Whenever he did the interview, he uses more ink color. I already get messages saying that I need to replace the Cyan. It's ridiculous! Is this normal?

  Hello @DarinP1965,

  Welcome to the HP Forums!

  I understand your Officejet 7610 running maintenance of the printer and use the ink. I will do my best to help you! Just so you know, usually when a printer keeps clean the print head, it indicates that something is wrong with your print head.

  I recommend the continuation of this entire document of HP ink trails fixing faded prints and other common Print quality problems

  Try cleaning the printhead by yourself a few levels to see if that makes a difference. If this does not help, you should then contact HP technical support for further assistance. Click here to read: worldwide Contact HP. Good luck.