Issue when installing ADF

Similar Questions

• Issue when installing fresh Windows XP on Tecra 9000

  I have a Tecra 9000 running Linux.

  I would like to install windows XP but the Setup CD I charge readers and then crashes to windows is the loading screen. I have no recovery disks or driver for this computer as I bought it used. and I don't know why he struggled.

  The SN for the unit is Z1086914G ST900-0.
  I have read forums about similar problems and think it might be the chipset driver for the HARD disk.

  I can't find a driver for nowhere so I can't try this line of thinking.

  Anyone has any ideas.

  Hello

  As I remember the Tecra 9000 does not support RAID or SATA controller that would require RAID or SATA drivers, so I put t think that your problem is related to the missing driver

  Have you tried to install Win XP SP2 from container?
  Are you sure that the HARD drive is OK? I think you should check the HARD disk for some problems initially.

• Driver issue when installing the wireless card

  I have Laptop Inspiron 15 3521

  and I can not install the drivers for the 1705 network dell wireless-N card

  I have download the right drivers for dell support using my service tag, but the installation fails every time

  any ideas?

  Provide the hardware IDs of your network controllers and unknown devices. See here:

  http://dellwindowsreinstallationguide.com/downloading-drivers-checking-hardware-ids-and-downloading-and-installing-dell-system-drivers-in-the-correct-order/checking-hardware-ids-in-the-device-manager/

  Dell drivers and downloads sometimes strange lists the bad wireless card.

• Issue when installing Oracle WebCenter Portal JSK 11.1.1.8.0

  Hello!

  I have an error at step 10 of the 22. Can anyone help?

  Fri Aug 1 07:14:03 EDT 2014: BEGIN STEP 10 of 22: creation of WLS and domain servers. Estimated time is 1 minute. Please wait..

  CLASSPATH=/u01/app/oracle/product/webcenter/fmw/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/app/oracle/product/webcenter/fmw/jdk1.6.0_29/lib/tools.jar:/u01/app/oracle/product/webcenter/fmw/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/app/oracle/product/webcenter/fmw/wlserver_10.3/server/lib/weblogic.jar:/u01/app/oracle/product/webcenter/fmw/modules/features/weblogic.server.modules_10.3.6.0.jar:/u01/app/oracle/product/webcenter/fmw/wlserver_10.3/server/lib/webservices.jar:/u01/app/oracle/product/webcenter/fmw/modules/org.apache.ant_1.7.1/ lib/ant-all.jar:/u01/app/oracle/product/webcenter/fmw/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/u01/app/oracle/product/webcenter/fmw/oracle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/lib/adfscripting.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/lib/mdswlst.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/auditwlst.jar:/u01/app/oracle/product/webcenter/fmw/ oracle_common/common/wlst/resources/igfwlsthelp.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/jps-wlst.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/jps-wls-trustprovider.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/jrf-wlst.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/oamap_help.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/ossoiap_help.jar:/ u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/ossoiap.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/sslconfigwlst.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/wsm-wlst.jar:/u01/app/oracle/product/webcenter/fmw/utils/config/10.3/config-launch.jar::/u01/app/oracle/product/webcenter/fmw/wlserver_10.3/common/derby/lib/derbynet.jar:/u01/app/oracle/product/webcenter/fmw/wlserver_10.3/common/derby/ lib/derbyclient.jar:/U01/app/Oracle/product/WebCenter/FMW/wlserver_10.3/common/Derby/lib/derbytools.jar:

  WebLogic Scripting Tool (WLST) initializing...

  Welcome to WebLogic Server Administration scripts Shell

  Help() type help on the available commands

  Creation of domain to/u01/app/oracle/product/webcenter/domains/webcenter using the /u01/app/oracle/product/webcenter/fmw/wlserver_10.3/common/templates/domains/wls.jar model

  Error: failed to set(). Do dumpStack() for more details.

  Problem call WLST - Traceback (innermost last):

  File "/ tmp/webcenter/jsk_unzipped/linux64/create_wc_ucm_ibr.py", line 37, in?

  File "/ tmp/WLSTOfflineIni1560864277384758095.py", line 99, to createDomain

  at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)

  at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)

  at com.oracle.cie.domain.script.jython.WLScriptContext.set(WLScriptContext.java:1304)

  at com.oracle.cie.domain.script.jython.WLScriptContext.createDomain(WLScriptContext.java:502)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: java.lang.reflect.InvocationTargetException

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/bin/startManagedWebLogic.sh: no such file or directory

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/bin/stopManagedWebLogic.sh: no such file or directory

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/bin/stopWebLogic.sh: no such file or directory

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/sysman/state/targets.xml: no such file or directory

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/init-info/tokenValue.properties: no such file or directory

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/init-info/startscript.xml: no such file or directory

  Fri Aug 1 07:14:31 EDT 2014: UNSUCCESSFUL STEP 10 of 22: creation of WLS and domain servers

  Admin password must contain at least one number

• This program has known compatibility issues when I try to install sql server 2008 in windows 7 X 64

  I use windows 7 (X 64), and when I try to install sql server 2008 I have this message & can not install it:

  ""

  This program has known compatibility issues:

  Check online to see if solutions available on the microsoft website ara, if we find solutions, windows will automatically display a Web site that lists the steps, you can take.

  Program: Microsoft sql server 2008

  Publisher: Microsoft

  When the sql server Setup program is finished, you must apply the service pack of sql server 2008 1 (SP1) or a later service pack before you run sql server 2008 on this version of windows

  Looking for online solutions run program cancel

  ""

  And I check online for solutions & recommended program installation, but also the same message appear, so please help me, how can I fix

  Hi DoudyEwais,

  1. How do you try to install SQL server 2008 on the computer?

  2. did you of recent changes on the computer?

  I suggest that you try to install the program using compatibility mode by running the program compatibility issues

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  List of known issues when you install SQL Server on Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/955725

  If the previous step fails, then after your query in the SQL server forums by using the link below.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

• Licensing issues when I go to re - install on a new machine?

  I had Illustrator CS5 installed on 2 machines (1 license). A machine that crashed, obviously before, I managed to uninstall officially. Did I meet licensing issues when I go to re - install on a new machine?

  Yes, you are noit be able to activate the new installation until you disable the one you had.  Uninstallation is not necessary but disabling is.  You can contact Adobe support using cat and they can manage the deactivation of inaccessible installation.

  Serial number and activation support (non - CC) chat

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Issue of INS-35354 when installing Oracle RAC 12 on infrastructure Oracle Grid 12

  Hello

  I am trying to install Oracle RAC 12.1.0.2 one node installation on Windows Server R2 2012, but the installer told me:

  'Valid [INS-35354] the system on which you try to install Oracle RAC One doesn't not part of a cluster.'

  On the same server I have is installed and running Oracle Grid Infrastructure + ASM.

  I don't know what is missing the installation program, which is possible to register? The installation program does not provide which had not passed the specific audit.

  Thanks for the tips

  Georg

  

  

  

  Hello

  A CCR node does not mean that you install the grid infrastructure in a single node and install a base of a RAC data on this node.

  Basically, a concept CAR is similar to active passive clustering to provide high availability. To have a node database RAC upward and launched, you will have to install clusterware on at least two server by selecting the option during the installation of the IM.

  Pls follow the below post for detailed answer

  INS-35354: validates the system on which you are trying to install Oracle RAC not part of a group when installing a 12 c RAC node database

  Concerning

  Krishnan

• Problem of storage space satellite L305-S5962 HARD drive when installing XP

  Hello

  Last week, I ordered two TOSHIBA Satellite L305-S5962 for my children and finally happened yesterday.
  I was so glad that I found all drivers XP needed for it on Toshiba USA website, however something weird happened when I went to install XP over there.

  It came with preloaded Vista and while under Vista, I checked the HARD drive space it is said about 250 GB (240 - ish), but during the installation blue screen boot XP it read C 131 GB only partition.
  So, if you round up to about 130 GB, where the other 90 GB's?

  This problem has happened to these two Toshibas, and read the two HDD substantially the same.
  In Vista, it reads close to 250 GB, but when installing XP blue screen (once I turn off the AHCI setting in BIOS) it reads at 131 GB. Is this some kind of driver issue? or to issue OS with AHCI?

  On the Toshiba site there are two HARD drive drivers, are a .exe and the other a .zip file.
  I tried both in the XP installation CD of nLite, but it does not help.
  It still reads GB 131, so now I have no idea what to do, or maybe I have something wrong during the splicing of nLite?

  In any case, if anyone has some insight on this problem, please let me know.

  Thank you!

  -G.P.

  P.S. Here is the link to site from USA, for XP SP2/SP3 drivers, HARD disk drivers.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=2350214& rpn = PSLB8U & modelFilter = TOSHIBA + Satellite + L305-S5962 & SelCategorie = 3 & selFamily = 1073768663

  Even once, if someone has seen, thank YOU!

  > I checked disk space HARD it is said about 250 GB (240 - ish), but during the installation blue screen boot XP it read the partition C 131 GB only.

  The HARD disk is partitioned into 3 partitions.
  The first partition contains OS preinstalled; Vista
  The second partition contains the image of Toshiba HDD and the last third partition is hidden. It s a small partition created by Vista and it contains the backup files. These files can be used if something goes wrong with Vista OS or if Vista needs to be repaired.

  So I guess you've seen only the first partition that contains the operating system Vista

• CNR error of command when installing game line switch

  original title: try to circumvent using NCRC command line switch error when installing game

  trying to load the game disc, go to about 66% and stops said to try to circumvent using the NCRC command line switch.

  that is - what, how do you want to get out there, he said not recommended, it is ok, please help, thanks

  Hello
  
  1. what game you are trying to install?
  2. is it compatible with windows 7?
  3 have you tried installing on any other computer?
  These error messages may also be due to corrupted computer files/virus. Here's how you can use the NCRC command line switch.
  a. click the Start button, type cmd. Result of research with right-click oncmd.exe and select run as administrator.
  b. type the path to the file to install this game and then leave a space and then type /ncrc.
  For example: c:\game folder\setup.exe /ncrc
  c. press ENTER.
  Please answer these questions and provide more information on the issue. This will help us assist you better.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Error 1935 when installing TurboTax 2010

  Help!  When installing TurboTax 2010 I got a stack of stack memory microsoft install error code 1935: to intuit.tax.Installer.Setup.MSIHelper.install MSI Package (install Boolean, string mispath.string cmdLine, IntPtr owner window handle Boolean computer restart required, Boolean user conceled).  Thanks in advance.

  TurboTax Online support sez...

  Error 1935: "year error occurred during the installation of Assembly '.
  http://TurboTax.Intuit.com/support/IQ/install-product/Error-1935--an-error-occurred-during-the-installation-of-Assembly/SLN12416.html

  Possibly related:

  • TurboTax 2009 can not settle because he thinks of the .NET Framework is not installed, even when it is (26 Jan - 10)
    http://blogs.msdn.com/b/astebner/archive/2010/01/26/9953883.aspx
  • More information on installation issues for TurboTax 2009 caused by .NET Framework 3.5 SP1, verification errors (Apr 05-10)
    http://blogs.msdn.com/b/astebner/archive/2010/04/05/9990936.aspx

• Error code 80070020 when installing KB968930 and update KB2463332.

  I get the error code 80070020 when installing KB968930 and KB2463332. Install other updates.  Automatic Fixer MS says this update should be fixed, says he has set when I run, but nothing changes.  Vista Home premium 32-bit, service pack 2.  Update does not work in safe mode.

  WHMM

  80070020 ERROR_SHARING_VIOLATION

  These errors very strongly suggest that you see the effects of a hijackware infection.

  Instead you send on what could turn out to be a proverbial 'wild goose chase', I would recommend that you contact the Security Support for the MS consumer on all this.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.

  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start e-mail Windows Update support incident request
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  You can also start a support incident via the homepage of customer security: https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  UTC/GMT is 20:44 Monday, May 21, 2012

• Error 0 x 80070490 when installing Windows7 in the other drive other than this drive containing 10 genuine Windows

  I bought a new computer HP laptop, real Windows Home 64-bit 10 unique language pre-installed.
  First of all, he had only 1 road 931GBs then I did 3 local drive out of it. Car with Windows 10 of 450GBs and other 2 discs of 301GBs and 150GBs.  20GBs is for recovery in the automatically created separate drive.

  Although install Windows7 into another player who may not have 10 Windows installed. At the start of start, this error 0 x 80070490 appears on the screen.
  I tried to use a Boot-able USB pen-drive, Windows DVD but nothing happened.

  Kindly help me with steps or spikes to overcome this problem and I would like to be able to install another windows
  NOTE that I don't want to lose my true Windows 10

  Hello

  I apologize for not speak to you within a reasonable time. Let me help you solve the issue.

  I suggest you mention the link below and follow the advice given by cheque and André costa, if that helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/when-installing-Windows-7-receive-error-code/73e05a03-385C-43AA-93BB-562d3330db50

  I also suggest you to see link below and check if that helps:

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/958044/en-us

  Keep us updated on Windows related queries and we will be happy to help you further.

• Performance issues when coming out of sleep

  I recently built a gaming PC. On Christmas day, I finished putting the thing together. It has an Intel i7-4790 CPU running Intel HD Graphics, 8 GB of Corsair Vengeance RAM, an Asus Z97 - A Mobo and a 2 terabyte Seagate HDD. I installed Windows and put everything in place. Then a week later, my MSI GTX 970 arrived in the mail.

  So, I take the thing to sleep and decreases the performance of the whole thing. Videos YouTube stutter, simple as games fight of World of Tanks to run at its usual rate of 60 fps. To avoid this, I simply restart my comp and then it works fine. performance is back to normal.

  A few weeks, Windows gave me a message on one of the Nvidia drivers causing performance issues when you wake up from sleep. I don't think a lot of it and rejected it. I'll try to reinstall all my Nvidia drivers. I uninstall the Intel HD graphics driver a few days ago and has not changed anything. I would appreciate an answer to this problem because I would like to continue to use the "sleep mode" because it consumes less energy and prolongs the life of my case of LED. Thank you!

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  
  

  Please run the trace when you encounter the problem

• Error 1722 when installing FSX windows8

  I tried to get FSX installed on my windows. I had installed it once and it worked but I had a hard disk problem and did a reset of programs and windows files 8.

  When you try to reinstall FSX it came at the end of this error 1722 and then cancels the installation and come up with another error to halfway, while rolling back and now I can't get install.

  Hi John,.

  Sorry to know that you are facing the issue during the installation of Flight Simulator X on Windows 8. The 1722 error message is a General Setup error message that States that a system level failure has occurred.

  Follow the troubleshooting steps suggested by Abdul Cyril Kola of this link and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-gaming/error-1722-when-installing-FSX-Windows-8/6d465c3e-9FB4-4287-aa5e-631c30b1c6ae

  Also see this Microsoft article:

  Error 1722 when reinstalling Flight Simulator X

  http://support.Microsoft.com/kb/928080/en-us

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Problem with installation if updates when installed

  Hello

  as I fought with some problems with Agents, I have studied the docs again.

  That's why I said - allright get later reinstalled (patched) Version the Enterprisemanager.

  When installing, I chose "(obtenir les mises à jour)." These where downloaded, rebooted interfaces.

  However, the installation runs in an error:

  INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

  INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

  INFO: oracle.sysman.top.oms: enter the SYSMAN user password:

  INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

  INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

  INFO: oracle.sysman.top.oms:Verify:

  INFO: oracle.sysman.top.oms: Enter password: SYSMAN

  INFO: oracle.sysman.top.oms: process_id:mve1rmclp7j2

  INFO: oracle.sysman.top.oms: [Initializing the RCU Runner MA, run the Action of schema, schema successfully completed Action]

  INFO: oracle.sysman.top.oms:Die Befehlsausfuhrung transx wurde mit dem status 0 sky

  INFO: oracle.sysman.top.oms:process_id:13nzs6kxz2aqx

  INFO: oracle.sysman.top.oms:Failure...

  INFO: oracle.sysman.top.oms:1 or the mistakes that happened in the exercise of the action:

  NEWS: oracle.sysman.top.oms:1):

  ORA-04063: Discovers "SYSMAN. "MGMT$ PA_RECOM_METRIC_SOURCE" contains Fehler

  File: / U02/app/Product/middleware/WHO/SYSMAN/admin/emdrep/SQL/Core/latest/patch/REC/patch_recom_grants. SQL

  Statement: GRANT SELECT ON MGMT$ PA_RECOM_METRIC_SOURCE to MGMT_VIEW

  INFO: oracle.sysman.top.oms:The plugin Repository Configuration failed his method

  And stopped :-(

  Is the code of the view:

  Select

  p.patch_uid as patch_guid,

  p.patch_id as a hotfix,

  p.Abstract as abstract,

  p.classification as the classification,

  t.target_guid as pa_tgt_guid,

  t.target_name as pa_tgt_name,

  t.target_type as pa_tgt_type,

  t.type_display_name as pa_tgt_type_display_name,

  Host.target_name as host_name,

  Host.target_guid as target_guid

  Of

  mgmt_targets host,

  gc_assoc_instances has,

  MOS$ PA_FINAL_RECOM f,.

  MGMT$ ARU_PATCH_RECOM_MD p,.

  mgmt_targets t

  where

  Host.target_type = 'to host '.

  and host.is_group = 0

  and a.assoc_type = 'hosted_by. '

  and f.patch_uid = p.patch_uid

  and f.target_guid = t.target_guid

  and a.source_me_guid = t.target_guid

  and a.dest_me_guid = host.target_guid

  The Table MGMT$ ARU_PATCH_RECOM_MD does not exist - this seems to be the cause of the failure

  Is this a known issue?

  And if so - no work around?

  THX

  Christian

  Edit:

  I checked it on a system installed without the upgrade option selected.

  The table ARU_PATCH_RECOM_MD $ MGMT are here.

  It is being investigated as a bug by our quality assurance team.  For now, please ignore the automatic update and installation should proceed to problem.