Issue with Vista wireless

Similar Questions

• Problems with vista wireless network connection.

  Whenever I try to access the internet via unsecured wireless network I have to reset the modem/router.  Only happens with Vista and does occur only on that network.  No problem on other networks (public) wireless and no problem at home with 3 other computers on this router wireless and internet.

  Hi Skip,

  A. when it last work very well?

  B. has been any changes made to your computer recently?

  C. don't you check the network connection?

  D. is in monitor mode wireless network card?

  Try the methods below.

  Method 1

  The tool the Network Diagnostics which is part of Windows Vista is designed to test the network connection to find errors. The Network Diagnostics tool can also be used to determine if the network-related programs are working correctly. To use this tool to resolve network connectivity problems, follow these steps:

  1. Open Internet Explorer and try to access the Web page that causes network connectivity problems.
  2. On the page that displays an Internet Explorer error message, click diagnose connection problems .

  The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  • He was unable to find a problem.
  • It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Method 2

  Open the link below and click the Fixit who can fix most of the issues related to internet explore.

  http://support.Microsoft.com/kb/936211

  Method 3

  Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Hope this has been helpful.

  Thank you
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• problems with Vista wireless

  I'm losing my wireless connection, but it shows that I am connected to the internet. I disconnect and reconnect and even though it shows I'm connected it does not connect to the web browser. Has anyone tried with a map of wiresless instead of the computer?
  Most of the ppl I talk seem to have the same problem. I'm sitting with my internet provider two nights in a row going on in connections. It works for a while and then it acks just straight up. Seems worse during the day for some reason any. I have a new wireless DSL and sometimes the only way I can get is to hook the Ethernet cable to the computer and DSL. If putting a wireless card in the computer would cure the problem I would be but what hard ware and soft ware problem?

  Thank you

  Chas

  Hello

  1. have you done any change in software on the computer lately?

  I suspect that there is a third-party application which is in conflict with the wireless connection. Configure the computer to clean boot and check if it works very well. If it works fine, we can use a 50-50 approach to find the conflicting application. See the article below for more information on the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Photoshop Elements 4.0 compatibility issues with Vista

  How to solve compatibility issues when Photoshop Elements 4.0 with Vista operating system loading. The software provided with the scanner Canon Canoscan 8600F.

  Nope, I'm afraid that this is going to work on. The best you can hope for is looking for patterns of compatibility, but otehrwise I don't think there is a way to run this software 7 or 8 year on Vista or Win7 / Win8 also...

  Mylenium

• Performance issues with Vista on Satellite L40 - 14N

  I just signed up to your forum, it's really nice, how it works.
  I bought 3 months ago, a satellite L40-14N, with Vista Home Premium pre-installed, but I'm starting to get tired of the delays.
  I also have a problem, always Walker I want to open some windows, such as control panel or my computer and all my icons on the desktop disappear after some time will be displayed again, but not the application open before (Panel configuration or my computer).

  I wanted to ask all of you, what may be the problem, in fact I think to get rid of Vista and install XP, do you think it would be a good idea?
  If so, what kind of xp (sp2, sp3, etc.)? And, what I would have in return when I install xp, as what drivers need me for my laptop works properly again?

  Thank you very much... good day

  Hello

  He knows that the Vista operating system is in need of more resources as a Microsoft OS at the beginning of s.
  I have a Vista on the L30 and I get a really slow performance.
  In addition many services and processes running in the background of the operating system. It also decreases performance.
  But all background processes are needed if you want to use all the features of notebooks such as the FN keys or buttons to Toshiba for example.

  However, I've installed XP on the L30 without any additional driver for the FN keys, control buttons etc and it was amazing to see how fast the laptop can be.

  So generally it s not a bad idea to install XP on the L40.
  But note; If you want to install XP on the L40 you must install the Intel Matrix Storage Manager first. Without this driver SATA XP does not recognize the HARD drive.

  Greetings

• m11x r2 issues with car wireless in windows 8

  I upgraded my laptop Windows 8, but I'm having some problems with the wireless card. After a few minutes of use, it will randomly fall the network connection. I have to disable and re-enable the network card to get connected again. Is there an updated driver for the wireless card? I think it's an Intel card, but maybe it's the Dell Wireless card.

  Hi, that give a try.

  Make a left click in the lower right corner and open Device Manager.

  Click network adapters and find your wireless card.

  Right-click on it and open properties.

  Click power management and uncheck the BOX "allow the computer to turn off this device to save power".

  Click OK, and then close all windows.

  You use the native drivers of windows 8 to run your wifi? If so and the solution above doesn't work try to download the correct drivers from the Microsoft or website killer, according to what brand wifi card you have.

• Tecra A9 - issues with Vista installed wireless

  1. sometimes, I start my machine 3 to 6 times before the wireless to connect to my router.
  2. some time when I connect to the internet via my wireless connection hangs at "opening port".

  Concerning

  Hello!

  Try to update the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I put t know what OS you use, but make sure that the option for the WLAN to energy saving is disabled. If you are using Vista, see this paper:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  Make sure your laptop and the router using the same WiFi standard.

  Last but not least to an update of the firmware on the router you can find on the site of the factory.

  Good bye

• Re: Equium P200 close issue with Vista SP1

  My Equium P200 seems to have developed a problem when stopping down.

  If I select 'Shut Down' option in the Shut Down menu then all revenues, but while the laptop restarts itself and there will be a 'blue screen of death' teling me he does a memory dump physical.

  When it is complete Notepad starts and there is a message saying that Windows (Vista SP1) has recovered from a serious problem.

  Any ideas on how to fix?

  Thank you

  AFAIK SP1 could create serious problems because of the problems of compatibility between some drivers and tools.

  Have you noticed the same issue without SP1 installed?

  I think you should check this!

• External hard drive issues with Vista

  Hi - I have a WD MyBook external hard drive with all my music and pictures on it. Today, when I hung it, my computer didn't recognize it. I have had this problem before and finally fixed by trying all my USB drives until one worked.

  This time, I kept getting a message that the driver (or player?) had malfunctioned. I've tried the drive on another computer and it worked fine.
  I went back to mine, it will appear in my computer, open, all records, finally got, but each folder was empty! Back to the other computer - everything was there and very well. Back to the mine - recognized her immediately but said there are mistakes that had to be fixed, ran the scan suggested, open upward, all records, everything here too. Yay!
  Go to open iTunes, can't find my library. Back to My Computer, suddenly, everything in the drive disappeared again! Even the main issues.
  Help! I am a total novice with the computer hardware. I tried Googling this but none of the ideas worked. Thank you in advance for your help!

  Hi midwestgirl80,

  To resolve this problem, delete the UpperFilters registry value and the LowerFilters registry value. These values may cause access problems. To do this, follow these steps:

  Important The method below mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.

  1. click on Start, type regedit in start search and press enter.

  2. Locate and then click the UpperFilters registry value. This value is located in the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFC1-08002BE10318}

  3. on the Edit menu, click delete, and then click OK.

  4. search for and then click the LowerFilters registry value. This value is located in the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFC1-08002BE10318}

  5. on the Edit menu, click delete, and then click OK.

  6. exit the registry editor.

  7 restart the computer

  After restarting the computer, check if the drivers are getting detected.

  Hope this information is useful.

  Boumediene. K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Track issues with the Wireless Mouse 5000 bought with Wireless Comfort Desktop 5000...

  Just bought a Microsoft Keyboard and Mouse (Wireless Comfort Desktop 5000). For some reason any mouse is pointing upwards and is not followed correctly. What seems to be the case after a few minutes of use tracking becomes unstable and it feels like the mouse pointer is delayed and begins to jump around the screen. It is even more evident when I start trying to drag windows around the office and if I drag too fast it starts to "hiccup" (best I can describe it) and it seems to miss a few frames per second that I am dragging to the desktop. I noticed in games, especially the FPS, quick turns because of the mouse to lose track, and a second, I'm facing forward and the other second I'm back, with no apparent transition between the two. I tried to disable the accuracy monitoring, but to no avail... For any help or suggestion would be appreciated...

  I use Windows 7 Professional and have no such problems with 8 year old Logitech wireless mouse, this keyboard is replacement.

  I know this is an old thread, but I can see nowear where the problem has been resolved.  I have a Logitech wireless mouse on my laptop and a thread on my desk, both had the same problem. The problem has been solved for me using just a mouse pad, no problem since! This answer may be there somewhere but I didn't fall on it even from Microsoft (surprise). Incidentally, my mousepad is often a sheet of A4 paper on a clip board. If someone actually reads this please let me know if it was any help.

• Vista wireless loses Internet access after the mode "Eve".

  Environment:
  HP Pavilion dv2610ca notebook PC, broadcom 802. 11 b / g adapter, Vista Home Premium 32 bit SP2, Siemens Gigaset SE567 router/modem.

  Problem:
  I can usually connect wirelessly to my home network and to the Internet whenever I start my computer. However, I have close the lid and leave it in standby mode, I can't access Internet after I opened the lid and the system wakes up. The system connects to my home network but cannot access the Internet. It shows a Local access only.

  Diagnosis and repair fails generally, telling me that I have a problem with my router. Disconnect, then reconnect usually works. My router power market also works.

  I saw lots and lots of issues with Vista wireless networks and I followed several of the recommended actions:
  -updated the driver broadcom
  -reset the IP stack by using the tool "Fixit" of Microsoft
  -disabled the use of IPv6 in two by disabling the check marks in the related devices and changing the registry TCPIP6 parameters
  -modified the registry to activate/disable the DHCP broadcast flag in the TCPIP Interfaces
  -J' tell the system not to disable the card Broadcom, but the "Power management" tab mentioned in some articles does not appear in its properties. The only reference to power is "Minimum energy" under the "Advanced" tab, then I disabled who.

  Nothing has solved the problem.

  Has anyone else had this problem and fixed it?

  I'm not a technical Wizard, so please provide instructions for any action that you suggest.

  Thank you.

  I replaced the Siemens router/modem provided by my ISP (Telus) with an old D-Link router and separate modem 3Comm I had been using a couple of years and the problem seems to have disappeared.

  I'll close this thread on the assumption that the problem will not rear its ugly head again.

• compatibility problem with Vista

  Hi all
  
  I have found it difficult to install the Captivate 3 under the environment of the Vista Enterprise, but the same installation file works fine with Win XP. Is there a compatibility issue with Vista Business? Anyone experienced the same thing?
  
  Error code is: 1395
  
  
  

  Hi all

  Now, I'm sure that this is the bug of Microsxxx. Now, I can not install Captivate 3, impossible to install MSN, can't even get built inside Vista automatic update service update form.

  The Microsxxx error code is 80073712, and I did exactly what I was told in the website:

  http://support.Microsoft.com/kb/KB931712

  But I wasn't getting anywhere!

  Now I'm going to "downgrade" my OS to XP Wiin (Finally, that I'm not sure if it is the downgrade at all)

  Thank you once again, Rick.

  Sam

• Sky wireless broadband does not connect with Vista

  I just changed my BT broadband to Sky.It works fine on my Mac but not connecting with my roommates PC that uses Windows Vista.After calls long with sky they said there is a problem with the DNS. I tried to call Microsoft, but they want to charge me which I am unwilling to do. I can connect to the internet on the pc with the thin Ethernet cable. In the center of network share, I have a cross between the network and the help of Internet Icon.Please as it should be sorted as soon as POSSIBLE and I cannot believe with such a company big as the sky that has thousands of customers, they say that it is a known issue and there is nothing they can do... So basically they say that anyone with Vista cannot use their wireless computers!

  Help, please...

  Hello pookieboy140,

  I suggest that you start with the management of Network Diagnostics on the computer that will help you in error, like why you are not able to connect to the Internet.

  You can refer the link that will give you information about this below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  Since you are not able to connect to the Internet, the best way to solve this problem is to contact your service provider.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Intel 4965agn wireless wrong with vista Home premium sp2

  recently I had to reinstall vista (clean install of 2007 system disk) due to an unknown problem that caused the ms does not recognize my installation as "authentic." The system is updated after a week of daily updates. before this problem my wireless connection worked continuously for years without problems. I remember having some problem with it before sp1, but certainly no problems since sp2. Since the reinstallation, I was not able to get the wireless to work. Device Manager indicates Intel wireless wifi link 4965agn works fine, but the diagnostics windows network says "intel...» 4965AGN"knows driver or hardware related issues. I tried updating to the latest driver for vista (32 bit) intel (13.2.1.5) and the issue has not changed. I have a gateway with processor nx860xl intel core2 t7200 cpu and 2 GB ram.

  Does anyone know a solution to this problem? How do I can diagnose to refine the cause to the driver or hardware or system settings or registry errors, etc.? Is there another driver who would be better suited or I'd better go back to XP or forward for win7? I have never had to reinstall older XP on my laptop. It was the 3rd or 4th reinstallation of Vista (although the last one was a good two years ago). I just want to get the wireless working again, so I must not be attached to my router for internet, etc.. Thanks for any help or suggestion.

  Hello

  Connect you to the support page of Intel card download the latest Intel drivers and update any drivers you have now.

  After installation, make sure that the Intel Wireless utility is not running in the background. Turn it off and get out of the startup folder.

  In general

  There is an inherent Catch22 to attempt to repair a computer wireless through wireless. Given that the without wire is not connected to the source, there is no interaction between the wireless source and the Wireless Client and no frame of reference to find what works and what does not.

  As a first step, I will temporarily move the computer to a place close to the wireless router and plug with a wire.

  When he works with a wire, switch Off the Wireless Security in the router, disconnect the wire and try to make wireless work. This must be done when the computer is always close to the wireless router to compensate for the weak, and or blocked the signal that could be part of the problem in the new suite spot work.

  In the computer itself.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.
  

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Major issues with Satellite S70 - t wireless has

  Hello

  I received a Satellite - S70t 31/10 and then had some problems wireless. From the start up my computer and began its activities on the internet, I suddenly noticed the sudden slow but also many problems such as the loss of packets and ping (which I had never experienced before) high.

  After some tests, I came to the conclusion that it is either something wrong with the wireless adapter, or on the other hand is not compatible with my router. I had questions everytime I open the laptop and connect to the internet, where my reasoning.

  I've updated the drivers for the wireless adapter, but it did not help.
  I am running a router Netcomm NB9wmaxxn.

  I hope that it will be able to be resolved quickly.
  Thank you.

  In my opinion you issue needs further investigation.
  It isn't quite clear, if the Wlan problem is related to the network card wireless Wlan driver, Wlan router or maybe the combination of the Wlan router and module Wlan.

  In my opinion, you should check if the same thing happens to connect the phone to another access point.
  You should check the laptop with or without the power adapter connected.
  Energy savings can affect the performance of Wlan.

  You should check if the problem could be related to the intensity of the signal.
  You should test the connection network wifi secure Wla also open Wifi (unsecured).

  Check also different standards of WLan 802.11 A B G N
  Of course, this test depends on the Wlan module. In the case of the wifi card does not support the 802. 11A, you will not be able to verify this.