Issuer of OFDM using RFSG

Similar Questions

• As part of the certification NAS RHEL 6 guest operating system is recommended. We see that the STAF Installation fails on RHEL 6. Because of this issue, can we use RHEL 5.7 as guest operating system?

  As part of the certification NAS RHEL 6 guest operating system is recommended. We see that the STAF Installation fails on RHEL 6. There is no rejection of STAF for RHEL 6.

  Because of this issue, can we use RHEL 5.7 as guest operating system? If so, it will lead to problems when VMware Certification?

  Seems to have been solved in WB 3.0.1

• I can install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can I have some compatibility issues? I use Windows 7. Thank you...

  I can install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can I have some compatibility issues? I use Windows 7. Thank you...

  Generally, it should work, but of course there may be problems of occasional compatibility through different programs and their different versions.

  Mylenium

• Performance issues when you use HTML5-Articles

  Hello world

  We build an application where we use HTML5-sensitive inside objects.

  On older iOS Devices (iPad2 iPad4 for example) and the performance is so bad that it is not really usable. Take for example up to 15 seconds of opening an Article downloaded until it is fully restored.

  We have a lot of photos and videos inside but inside the browser OS, it works a lot better.

  Is there anyone who has had the same issues or any idea how to optimize performance (especially on older devices)?

  Thanks in advance and best regards!

  Lars

  Lars salvation,

  The control of the OS used to display content on iOS is a different rendering than the OS browser technology and has different performance characteristics. In particular, it is slower on older devices, such as the iPad 2.

  Based on your description my guess is that your image size is driving performance issues. Take a look at what size in pixels are your images and aggressively, re - compress. I had successful scaling of images to 50% of the size I think I need and then save them in JPEG format at a quality level of 7 (or even 5) in Photoshop.

  Regarding the videos, make sure that you use the

  Neil

• How to run SQL "Issued" BI answers using a query tool?

  How take the 'SQL Issued' in the tab 'Advanced' in demand in BI answers and run its equivalent on the tables of the database, by using a tool like in SQL Developer?
  
  For example, BI answers shows "SQL to show" of:
  
  SELECT Team2. Team2 PIF"saw_0, an2. "' Year ' saw_1, Cube2.Hr saw_2
  OF 'AW_BALL2 Cube2.
  WHERE Year2.Decade = '2000's
  ORDER BY saw_0, saw_1, saw_2
  
  How translate this into something that will run in SQL Developer and show me the same data that takes demand? Thank you.

  the SQL code that you quoted is the SQL logic.
  It was sent to presentation services through ODBC to the BI server, which translates using the RPD in 'real' SQL, which is fire to the database.
  As said, you need for the level of logging to see the 'real' SQL that runs the BI server... This in the administration in respect of security tool. See the Administration Guide for more information.

  FWIW, if you really want to run SQL that you mentioned and then launch an ODBC client (Microsoft query, TOra, etc.) and direct him to a system DSN you set type Oracle BI pointing to your Oracle BI server.

• U2515H, the issue of the use of Port

  Hello

  I had a Dell U2515H, now the thing is that I wanted to update my graphics card bios, which is the gigabyte g1 games GTX 970, in order to update the video card they requires the use of two DVI - D DVI - I cable. The question I have is that I would be able to use DVI - D and DVI - I HDMI to the Dell U2515H?

  Help, please!

  Thank you.

  I'm confused. There is no way Garland DVI - D to DVI - I to a single HDMI port on the monitor? IF that's what you think.

  DVI - D video card on--> DVI - D to HDMI Cable--> U2515H HDMI # 1 (will work. No idea what the resolution is taken in charge)

  Video card DVI - I--> DVI - I to HDMI--> U2515H # 2 HDMI cable (will work. No idea what the resolution is taken in charge)

  You should contact Gigabyte before continuing.

• BlackBerry Smartphones MMS issues (AT & T) using Messenger

  When I try to send MMS to my PRIVATE messages I get not "sent. key to try again".  When someone sends me a MMS then I get on my PRIVATE "could not download size 32,00 KB, expiry mm/dd. Touch to download.  I touch to download and get "not found message.

  Have installed all the latest updates for the PRIV and Messenger.  Bought the PRIV to shop.blackberry so it is unlocked.  Have talked several times again both ATT and Blackberry, but no solution.  Text messaging, web access and calls all work fine.

  Either way, I can send photos and other MMS using WhatsApp, but want to use Messenger.  Not had this problem with my old Z10.

  Thank you very much for your suggestions.

  Two options

  You can go the menu test

  -Go to your application of composition of phone and enter * #* #4636 #* #* and the Test menu will come

  -Access phone information

  -Scroll to the bottom for "SMSC: _.  It is prob empty, click Refresh and it will fill.

  This only temporarily fixed it for me.  I ended up installing Textra and had no more problems with the MMS.

• Ownership/permissions of issue of the use of files

  So, my problem is this: I have a 2.5 gig folder full of music that I do not have access to. No matter what type of media player, I use, whether it's WMP or VLC or anything in-between, I get an error stating "You don't have permission to open this file" or, in the case of WMP, this file is currently being used by another program.

  I went into the properties for the main folder, even though each individual file that has held in the breast, and changed the permissions and ownership for the computer, the files are on, but I'm still not able to access all of the files either. Are there steps I'm missing, or other measures I could take, in order to access these files again?

  So, I think I finally cracked the problem. My problem was that the owner of the folder itself, titled simply music, administrators, what is my profile, but the property has the value "this folder only". I edited the property to include all subfolders and files, and delete the former owners and have it be original ownership, not inherited. Now I am able to play all these .mp3 without problem!

  Thanks for your help!

• Blue screen issue whenever I use the Torrent Client Please Help!

  Hello...

  Everything was ok, all of a sudden, I continue to receive the Bluescreens he said netio.sys caused the Bsod!...
  It occurs only when I try to use the Torrent Client (Utorrent, Bittorrent).
  I tried to update the network drivers, but could not find new ones on the dell support Web page.
  The mini dump files: https://www.dropbox.com/s/qq4djw4clgakniw/102713-20935-01.dmp   
  https://www.dropbox.com/s/89pw0hifsqmil28/102813-25147-01.dmp
  Please help me solve the problem.
  Run Dell Inspirion 15r N5110
  Intel i5 processor
  4 GB Ram DDR3
  GPU NVIDIA 525 m

  Update : I was surfing for some corrections. I came across this link (http://www.troublefixers.com/utorrent-crashes-windows-7-with-blue-screen-of-death/)

  I asked he'll keep this post updated.
  UPDATE 2 : link above the fixed Solution! : D

  Steps to disable Teredo

  Step 1: On the start menu, search cmd, Windows locate the cmd.exe which is the prompt, right click above and clock on run as administrator.

  

  Step 2: On the command prompt, type the following command and press enter

  netsh interface set disabled state Teredo

  

  This is it, its done. Hope you find the above easy to follow trick.

• Attachment issues Nikon D7100 using Lightroom 5.7.1

  I tried everything but can't seem to get my Nikon D7100 to tie with Lightroom 5.7.1.

  According to list of Adobe of cameras that can be attached to Lightroom (https://helpx.adobe.com/lightroom/kb/tethered-camera-support.html), any version above Lightroom 5.2 is expected to tie up with the D7100.  (I use 5.7.1 so I thought it should be good.)

  I did the software updates, updates of firmware, uninstalled and reinstalled but still I get the message "no camera detected".

  As a test to make sure that the problem was not related to a defect of the camera or cable, I tried to attach the camera using Nikon's Camera Control Pro 2 and while the software meets my needs, in the same way that Lightroom do... She recognizes that the camera and the attachment worked well.

  I wish I could use my Nikon D7100 with my Lightroom 5.7.1 software and would be grateful for any help that you could provide.

  Thank you

  If you use Apple OS X 10.11. ? (El Capitan) that the strap will probably NEVER work with your Nikon and Lightroom.  Nikon beat attached in El Capitan, then you will need to update the 6 Lightroom.

• Performance issues when you use TimeWarp

  Hello

  I'm trying to understand why a CS6 updated AE to date is to have performance on a generation problems relatively high-end. I'm trying to use the time warp effect to make the scenes of idle but AE runs very slowly once that I was drag in a clip that its unusable.

  I were read stimulating performance article which shows how to increase the hard drive cache (I'm under it an SSD in passing) and adjust the amount of RAM and the number of cores is used, has no effect.

  Here is my card of build:

  CPU: i7 3770 k @ 4.2 Ghz

  RAM: 16 GB 1866 mhz Corsair Vengeance

  SSD

  GPU: 2 x GTX980

  OS: I tried it on Windows 8.1 and Windows 10 Technical Preview, no difference. Both fully implemented to date.

  I also tried the Cloud creative trial version to see if it gets better, here, it works more slowly.

  Any help or contribution is appreciated.

  It might be the film.  Things like AVCHD, mp4, h.264, and mpeg compression interframe - not every image has complete image information... just things that have changed from one image to the other.  If you mess with time use, AE must rebuild the incomplete frames first, and THEN it must mess with time.

  The fix - use a good intra-image codec.  I love quicktimes ProRes 422, Photo JPEG, PNG or animation.

• performance issues when you use adapter jena setSessionQueryDOP / oracle 12 c

  Hello

  When I create a ModelOracleSem instance with the command:

  Model = ModelOracleSem ModelOracleSem. createOracleSemModel (oracle, modelName);

  Everything works fine (the creation of the instance takes less than 1 s), however if I use: oracle.setSessionQueryDOP (8), the establishment of the Forum is very slow over 15 years. I do not suffer this situation before migration to 12 c

  Am I missing something?

  Hi Arnaudz,

  Use 'DEGREE = 8' should be a little more effective than the "DOP = 8" because that parallelism is defined at the level of education with degrees setting.

  Your material is quite impressive!

  Thank you

  Zhe Wu

• EqualLogic Multipathing plug-in - issues with linking using setup.pl

  I get this error when I try to get the Module of Extension Multipathing EqualLogic to configure my ESXi 4.1 box.

  Could not bind vmk1 one iSCSI adapters.

  I have a Dell M710 server. There the Broadcom 57711 NIC with load HBAs iSCSI hardware.

  Here are the steps to reproduce the problem:

  Installed ESXi 4.1 on host M710

  ESXi host configured with a password

  ESXi host configured with the IP address settings

  Connected to my vMA host (who has a local copy of the DELL-eql-mem - 1.0.0.130413)

  vifp addserver 192.168.110.63

  vifptarget s 192.168.110.63

  ./Setup.pl--installation--server = 192.168.110.63 - bundle = dell-eql-mem - 1.0.0.130413.zip

  I then reboot the ESXi host

  Once restarted

  vifptarget s 192.168.110.63

  ./Setup.pl--configure--serveur = 192.168.110.63 - vswitch = vSwitchISCSI - mtu = 1500 - NIC = vmnic6 - ips = 192.168.102.98 - subnet mask = 255.255.255.0 - vmkernel iSCSI - groupip = 192.168.102.40 =

  Then, it produces the following output:

  Network iSCSI Multipathing configuration:

  vswitch = vSwitchISCSI

  MTU = 1500

  NIC = vmnic6

  IPS = 192.168.102.98

  subnet mask = 255.255.255.0

  VMkernel = iSCSI

  EQL group IP = 192.168.102.40

  Creation vSwitchISCSI vSwitch.

  Definition of vSwitch MTU to 1500.

  Creating portgroup iSCSI0 on vSwitchISCSI vSwitch.

  192.168.102.98 to iSCSI0 IP address assignment.

  Create a new bridge.

  The addition of link rising vmnic6 to vSwitchISCSI.

  The definition of new uplinks for vSwitchISCSI.

  Definition of uplink for iSCSI0 on vmnic6.

  Could not bind vmk1 one iSCSI adapters.

  Argh

  So I use the vSphere Client to remove the switch, he created (and vmk etc ports)

  I then try again, this time with software instead of hardware iSCSI iSCSI

  ./Setup.pl--configure--serveur = 192.168.110.63 - vswitch = vSwitchISCSI - mtu = 1500 - NIC = vmnic6 - ips = 192.168.102.98 - subnet mask = 255.255.255.0 - vmkernel iSCSI - nohwiscsi - enableswiscsi - groupip = 192.168.102.40 =

  Which produces the following output:

  Network iSCSI Multipathing configuration:

  vswitch = vSwitchISCSI

  MTU = 1500

  NIC = vmnic6

  IPS = 192.168.102.98

  subnet mask = 255.255.255.0

  VMkernel = iSCSI

  enableswiscsi = 1

  nohwiscsi = 1

  EQL group IP = 192.168.102.40

  Creation vSwitchISCSI vSwitch.

  Definition of vSwitch MTU to 1500.

  Creating portgroup iSCSI0 on vSwitchISCSI vSwitch.

  192.168.102.98 to iSCSI0 IP address assignment.

  Create a new bridge.

  The addition of link rising vmnic6 to vSwitchISCSI.

  The definition of new uplinks for vSwitchISCSI.

  Definition of uplink for iSCSI0 on vmnic6.

  Activation of initiator SW.

  Permit SW initiator.

  Could not bind vmk1 one iSCSI adapters.

  Ugh once again.

  What I'm missing here? The commands that I use to setup.pl are actually given to me by setup.pl when I use the option - command sets:

  ./Setup.pl--configure--server = 192.168.110.63

  It has a nice Wizard that you ask all the questions, then tells you what is the actual command to use.

  I know that my steps using only 1 network card but I started using 2 network adapters and 2 IP addresses but it gave me the same error. For troubleshooting purposes, I decided to use only 1 network card and 1 IP to test. I also tried vmnic7 instead of vmnic6 with a different IP address but no luck.

  I tried a fresh install of ESXi twice.

  A huge 10 points to someone who can solve my problem

  VCP3 & VCP4 32846

  VSP4

  VTSP4

  Updated the commands I used wrong vifp instead of vifptarget, the problem still exists, but tried to fix this error.

  Box293,

  Which, in my opinion, happened is that vmk1 is already bound to something, the iSCSI Software card or hardware iSCSI adapter, possible earlier attempts or possible to have the classic configuration path fixed on this server - less certain on this second possibility.

  Deleting a key vmk from the GUI does not cancel the bindings, this must be done from the CLI with the command 'esxcli swisici '.

  esxcli swiscsi nic list d vmhba37 # lists all interconnect them related to hardware/software iSCSI card

  esxcli swiscsi nic remove - n vmk1 d vmhba37 # this will remove the binding vmk1

  Do these steps should help you clean any link you have.

  A lazy way to clean the link would be to re - install ESXi

  I hope this helps.

  David

  Reference Dell | Used EqualLogic

• Issue by not using not equals operator

  Oracle: 10.2 g
  
  Data from the sample table:

  -- Table psn
  type_number       name        category
  1                      carl           5
  1                      carl           5
  1                      carl           5
  2                      mike         5
  2                      mike         5
  3                      bob          5
  3                      bob          5
  3                      bob          5
  4                      greg         5
  5                      chris         5
  6                      charles      5
  6                      charles      5
  
  --Table series
  type_number       year         cat_id
  1                      1999        2
  1                      2000        2
  1                      2001        2 
  2                      2001        2
  2                      2002        2
  4                     1995        2
  5                     2008        1
  6                     2007        2
  6                     2008        1

  Query

  select s.type_number, s.name
  from   inv.psn s
   (
   select distinct temp.type_number, temp.name
   from inv.series f, 
   inv.psn s,
   where s.type_id = f.type_id
   and s.category = 5
   and f.cat_id = 2
   ) temp
  where s.category = 5
  and temp.type_numebr != s.type_number

  Desired result set

  type_number       name        
  3                    bob

  Hello

  Whenever you have any questions, please post sample data in a form that people can use (for example, CREATE TABLE and INSERT statements) and explain how you get the results desired data matching. Otherwise, you may have a solution that happens just give the right result for the wrong reasons.
  For example, the following produces the output you asked for:

  SELECT     3       AS type_number
  ,     'bob'   AS name
  FROM     series
  WHERE   ROWNUM  = 1
  ;
  

  and indeed:

  SELECT DISTINCT
          type_number
  ,     name
  FROM     psn
  WHERE     type_number NOT IN ( SELECT  type_number
                          FROM    series
                      WHERE   type_number     IS NOT NULL
                    )
  ;
  

  Both are just speculation. Guessing is not very effective.

• In the face of slow performance issues when you use Microsoft applications.

  Original title: The Office Windows and student 2010

  Windows is slow to opening any windows file (ms word, excel, windows live mail, etc.), and more when you type in one of these applications, there is a striking shift. I did all the diagnostics repair in programs and features, troubleshooting, disk cleanup, defragmentation, etc. I ' don't know what to do next. As I type this question, it is not a lag in typing. The striking shift happens in Microsoft products. The Internet Explorer search box works without a striking shift.

  Opening of MS word, excel, windows live mail is very slow. Once they open, typing accusing each other.

  Please let us know your problem is solved.