Issuers of cars proposed and recommended for the fuse?

Similar Questions

• 32-bit vs 64-bit processors, and recommendations for the new computer operating systems

  This message can be duplicated... because I posted in laptop - forum.

  I'm in the market for a new desktop computer and want to do a lot of video editing (using Roxio and Vegas Movie Studio).  I want to know the specifications to ask.  I need to know if it is better to get a 64-bit operating system processor AND... OR... a 64-bit processor and a 32-bit processor or should I just stick with 32-bit systems?   I'm afraid that my drivers and existing software may not be not compatible with 64-bit processors.  I want a system that will be able to also change the HD videos.

  Any help with explanations would be appreciated.

  Thanks in advance.

  Hi lcdrdan,

  I use a HP Elite d5000t with Vista 64 bit and I have Vegas Studio 9 installed and it works great. The specifications of the box didn't say it works with Vista 64-bit, but it does.

• IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  Sorry, but if your device is disabled and you have no backup, then you won't be able to save the data on the device:

  https://support.Apple.com/en-us/HT204306

  You should back up your device regularly to iCloud or import your photos to an application on your computer. Otherwise, you will be risking losing those photos. If your device has been lost, stolen, or crushed by your car, you'd be in the same situation. Really sorry for your photos.

  Good luck

  GB

• Recommendations for the best 3D modeling App / program?

  Does anyone have a recommendation for the best 3D modeling application / program?

  (More for the creative rather than animation games and computer work)

  Thank you

  Hello

  I love Autodesk Inventor, but you need to use BOOTCAMP or VMWare/Parallels to run it because it only works with Windows.

  See you soon,.

  Adam

• I need a download of software recommended for the Transcriber ICD-PX312 for Windows 7.

  I installed the software that came with the ICD-PX312 on a windows system 7 and it crashes constantly. I need a download location for the software recommended for the valid software for the Windows 7 platform.

  all links will be useful.

  Hi Tim,.

  Welcome to the community of Sony!

  Download and install the latest version of the software of the Organizer from the link below:

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=ICDPX312&upd_id=8218&os_group_id=5

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• Parallel logic LSI, LSI logic SAS, parallel Buslogic (not recommended for the guest operating system), vmware paravirtual

  Infrastructure:

  vSphere

  ESX 4

  Reference Dell R710 Server

  I install WIN 2003 x 64 as a virtual server on ESX 4, when I select LSI logic SAS & LSI logic parallel it does not detect the hard drive, do I need driver if so where can I download?

  For parallel bus logic (not recommended for the guest operating system) & Vmware paravirtual, do I have to select this option for my win 2003 R2 x 64 edition?

  Please help on this issue.

  ~ Rashid

  If you really want to use it for installation, you will need to extract the driver from the VMware Tools ISO and add it to a disk image.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• Format recommended for the PDF author metadata

  Hello

  I work as a librarian and I am responsible for the Department of the thesis of my University Library. These are filed and archived as PDF files. Some of them are available online, some are not.

  I was told to systematically fill metadata "Title" and "Author" for each PDF deposited in our electronic despository.

  My question has to do with metadata "author." Is there a structure recommended for her?

  As it is I can think of a lot of different alternatives:

  First name last name

  LastName Firstname

  LastName, Firstname

  etc.

  As a librarian, my instinct was to choose the name, first name format (used in the author/creator DC element, for example), but I realized that whenever I have saved the PDF file and then displays the part of metadata (via the shortcut Alt D), it would show "Lastname, Firstname" rather than the full name (for some unknown reason, adds Adobe Pro "" ""). After some tests, I came to the conclusion that the coma was the source of the problem. So I changed my mind and adopted the format Firstname Lastname , but I'm not sure that this is the best option.

  So if I ask you a few questions, here they are:

  -Which format do you recommend for the metadata of the author (if there is one)?

  -Why a coma generates ""?

  Is there a specific separator character that I use when I need to fill two different names (if a given thesis has been written by two different people)? (this issue also applies to metadata "Key words")

  Thanks for your patience and for your time,

  See you soon,.

  JHM

  There are no rules in itself, but the XMP specification defines DC: creator as a ProperName field, which means it must be written in the way he would say - "John Smith" rather than "Smith, John". Finally, it is until you do with data - if your external search system to priority of family name, do it.

  The fields on the tab of "description" of PDF Properties dialog comes from this Document information block in the standard PDF file, which is independent of the XMP metadata. Although these fields of DI are often people will look on, in a formal catalog system the XMP object has priority (indeed, in the ISO PDF/A standard that you are supposed to ignore completely DI fields).

  Document Information fields are stored in the PDF file as strings rather than the XML entities. Commas would confuse the parser in thinking it was to see a table, so they will trigger Acrobat in order to encapsulate the entries between quotes. He will assume a comma and a single space are part of an individual term, if you want to create a list using the semicolons or several spaces between words. Senicolons conquer spaces:

  • Doe, John; Lord Lucan; Barney, the Purple dinosaur will be kept at the "Doe, John"; Lord Lucan; 'Barney, the Purple dinosaur'
  • Is no one, no one will be kept to the ', that is, not a "; person because the spacing is a term separator.
    

  The important thing to remember is that the entrance of DC: creator XMP is updated whenever you change the author field of DI, but it does NOT follow the same rules. ProperNames XMP are OK with spaces but they don't like commas or semicolons - so the first example above appears in the tree view of XMP as

  1. DOE
  2. John
  3. Lord Lucan
  4. Barney
  5. Dinosaur
  6. the
  7. Purple

  This reinforces the idea of using names as spoken. Lord Lucan has survived his trip to XMP, John Doe became two people. Barney is beyond hope. in many ways.

• Recommendation for the configuration of the disk

  Recommendation for the configuration of the disk:

  A wide range of RAID 5 consisting of 8 x 146 GB drives?

  Two arrayys of RAID 5 with 4 x 146 GB drives in each table one would be used for the data store, and the other would be usd to images of backup to it.  The idea here is that when we do backup via the script GhettoVCB/o would be mainly on the secondary RADIUS and not the main data store.   In my opinion?  I think I have the only RAID 5 Bay with all the readers of 8 x 146 GB for a data store single should surffice.   I don't think the performance problems will be that detrimental.

  Do not hesitate to offer advice on scenarios, thank you

  Engineer accommodation

  ModusLink Open Channel Solutions, Inc.

  As written before, depends on the type of e/s.

  With more than R and W low, RAID5 (on multiple disks) could be very good.

  But don't forget to also use a global hot spare, degraded performance a RAID5 mode could be dramatic.

  And don't forget that your controller has a battery backup.

  André

• What are the advantages and disadvantages for the largest block size and

  What are the advantages and disadvantages for the largest and the smallest block size block size?

  Smaller size of block

  Benefits
  Relatively large GoodHas air space due to metadata
  (i.e. block the header).
  Not recommended for the outline. He could only
  be stored for each block, or worse, a few lines line
  If one line does not fit into a block, for small lines with a lot of chance of chaining
  access.
  Reduced block contention.
  Disadvantages
  A relatively large air space due to metadata
  (i.e. block the header).
  Not recommended for the outline. He could only
  be stored for each block, or worse, a few lines line
  If one line does not fit into a block of chaining.

  Larger size of block

  Benefits
  Lower overhead, so there is more
  room to store the data.
  Allowed to read a number of lines in
  the buffer with a single I/o cache
  (according to the size of line and block size).
  Good for very large or sequential access
  lines (for example, LOB data).
  Disadvantages
  Waste of space in the buffer cache, if you
  random access to small lines and have a large block
  size. For example, with a size of 8 KB block and 50
  size byte of the line, you will lose 7 950 bytes in the buffer
  When you make a random access cache.
  Not good for the index used in an OLTP blocks
  environment, as they increase the claim to block
  on the leaves of index blocks.

• In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  
  (140233)

• How can I set the default font size and type for the outgoing Hotmail mail?

  How can I set the default font size and type for the outgoing Hotmail mail?

  Hi Dale,

  What is the email client do you use?

  Outlook can be configured per - start Outlook-> Tools-> Options-> mail-> fixed Format and fonts... Select the font and size you need... Click ok on all screens.

  I hope this helps.

• How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

  How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

  Read my initial response on what it takes to please.

  "See if this helps you:

  These lines indicate corruption graphics driver or lack of graphic material.

  Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If that fixed it, it seems to me be a problem of graphic material.

  Because it's a laptop; If under warranty, contact HP.

  If is not under warranty, contact a repair shop, local. »

  See you soon.

• Where can I find the drivers and software for the LaserJet Pro M1132 MFP on Mac OS Mountain Lion?

  Hello

  According to http://support.hp.com/us-en/document/c01664444 it doesn't seem to be a software and drivers for the LaserJet Pro M1132 MFP.

  When will they be available?

  I read in http://support.hp.com/us-en/document/c03427752 that "today, a solution for your printer is not available for the Mountain Lion. However, an update of the driver will be available in fall 2012 . "Since it's already winter 2012, a solution will be available before January 2013?

  Thank you.

  Hi Chun Pong,

  Seems to download the software I mentioned before has been deleted. This means that a new driver will be downloaded.

  Please visit the site from time to time if a new software is available. I'll keep an eye as well and provide an update here, if the new software can be downloaded. It may take a few days.

• Where to put the report server ip and port for the Siebel server?

  Hello

  Where to put the report server ip and port for the Siebel server? I have checked the document "Reports Siebel Guide" but does not know where is the configuration section ' ip address of the server and port ' for 'Oracle BI Publisher.

  Note: I have installed BI Publisher, now necessary to define the ip editor and siebel server port.

  Please help, thanks.

  Hello

  Communication between Siebel and BEEP coming through webservices. You must set the Siebel Outboundwebservice 'PublicReportService' address to address BI Publisher.

  Similarly, the address of the webservice Siebel Inbound 'BIPSiebelSecurityWS' will be used by BEEP setting under the security model of Siebel - Siebel end Webservice poin of connecting to Siebel EAI, data inorder of success authenticate the Siebel user to perform the tasks of report being initiate Siebel UI.

  Please go through the integration document attached to the thread "Re: ADVISE WEBCAST: BI Publisher 11g Configuration with Siebel", it is any integration Siebel with BEEP 11g steps. " But if you go through each step, there are details about why we do it. Through this way you can better understand the integration.

  I hope this helps.

  Thank you
  Maria

• I need to create combinations of text and images for the web. How to do this in elements or do I need Photoshop for this feature?

  I need to create combinations of text and images for the web. How to do this in elements or do I need Photoshop for this feature?  Please advise!

  slynn5236 wrote:

  I need to create combinations of text and images for the web. How to do this in elements or do I need Photoshop for this feature?  Please advise!

  You can do in PSE.

  1. Do the math to see how much space you'll need on your canvas to the image and text.
  2. Navigate to the file queue > new.blank. Enter the width & height, background color, resolution 72 px / in. It is your canvas, and in the layers palette will be the background layer.
  3. Copy and paste the image. It turns on a separate layer
  4. Activate the tool move, position the image and resize if necessary
  5. Activate the text tool, and then type your text. It will be on a separate so layer
  6. Position the text.
  7. Flatten layers and go to file > save for web. I'm usually on the long side about 800 px. Don't forget to check "constrain proportions". Adjust the quality slider to suit. You will probably want the type of JPEG file for web work.