Similar Questions

• Vista Ultimate SP1 Pro: repeated failures to install SP2 and several failures repeat to install some other upgrades second request for help)

  Hello

  I'm a professional software developer, and in the last five days I have tried in vain to upgrade my Vista Ultimate Pro (purchased in the United States two years ago) SP1 to SP2 and make that the machine is in use.

  I would like professional assistance with this question and the advice to do a "clean" installation and annihilate the four days of settings and configuration of programs and software development tools is not a satisfactory answer: I want to know why I can't do an "upgrade" install: why 'upgrade install' disabled when I launch setup.exe from the original DVD / install install Vista?

  1 SP2 will not install (from Windows Update or the downloaded standalone installer from MS) (see my previous post here):

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/d499b50d-8f67-460f-ACF3-df2ff12ecec7

  for details and for a response of S. Bodin who gave no useful tips).

  2 56! other updates appear repeatedly as needing to be installed, and then they re - install whenever I have closed the computer, and, when I re - starts, they appear as being initialized, or whatever, once again.

  3 IE8 is already installed, .NET FrameWork 3.5 + is already installed (as part of the VS 2010 beta install), but they appear in the queue of facility among the 56 other updates.

  I can honestly say I've lost a lot of time and money dealing with the problems of Vista: it's one of the reasons I have not used for more than a year: I had hoped at the time of SP2, it would be stable enough to use.

  Thank you, Bill Woodruff, dotScience

  Bill Woodruff

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  Ø you are booting from the DVD to upgrade your Vista?

  Boot to the desktop and insert the DVD to upgrade your Vista.

  You can download the service pack from the link below.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Method 1:

  Follow the instructions in the link below to restore the security settings for the default settings.

  How to restore the security settings the default settings?

  http://support.Microsoft.com/kb/313222

  Method 2:

  Follow the instructions in the link below to reset Windows update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3:

  Follow the instructions in the link below to run the update system tool which will help you to solve the problem.

  Description of the preparation tool update for Windows Vista for Windows Server 2008 and Windows 7 system

  http://support.Microsoft.com/kb/947821

  Method 4:

  Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 5:

  Follow the instructions below to install the service pack in safe mode.

  1 turn on the computer or restart the computer

  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear. If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.

  3. check that the safe mode option is selected (the High option of the page)

  4. press ENTER. The computer then begins to start in safe mode.

  5. install the service pack.

  Method 6:

  Analysis of auditor of file system (CFS) which will help you to solve the problem.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  Follow the instructions in the link below to run the SFC scan.

  http://support.Microsoft.com/kb/936212/

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Re: Request for help with Tecra A10-156 (Vista backup media)

  Dear members of the Forum

  I am the owner of a laptop Toshiba Tecra A10-156. As the owners of this model will be aware, the machine is supplied with Windows Vista pre-installed. Also supplied is a recovery of Windows XP Professional disc, which, once loaded on the machine, remove everything on the hard drive, including the operating system Vista and the Vista hard disk recovery partition.

  The documentation that comes with the laptop warns the user if he wants to take the Windows XP program on the computer, it must burn a DVD of backup software vista before you load the XP image because if it loads Windows XP without doing that then he loses everything to do with VISTA on the machine.
  Unfortunately, when I bought my machine, I did exactly this error and load Windows XP without backup Vista Software. Load the XP dvd, hard drive was completely wiped out, including not only the Windows Vista installation, but also the recovery partition.

  Although windows XP is a good operating system, I would like the ability to restore my machine to the factory setting. When I asked what to do with Toshiba, they said that the only way they could help would be to sell me a backup DVD of Vista recovery which would cost me a little money. (more than thirty books).
  They also mentioned that if I could find another owner of A10 - 156 using vista would be ready, they could burn a DVD using their recovery from vista machine and then I would be able to use this DVD to do the job.

  As I know personally of all other owners Tecra A10, I am writing to make a plea to ask if some A10-156 (it takes as the exact model) owner would please that nature to let me have a copy of VISTA backup medium please. Of course, I'd be more than willing to pay a total amount of the Virgin DVD (s) and shipping costs.
  If someone is willing or able to help should I very grateful indeed and hope to hear from a fellow A10-156 owner as soon as possible.

  Yours sincerely
  Ian in the United Kingdom

  I hope someone here can help and maybe you should put your e-mail address for direct contact.

• Urgent request for HELP, received a phone call from GEEKS for PC TO fix my computer, because theres a Trojan horse horse hidden on my Thru Microsoft Windows folders.

  I received a phone call from microsoft technology who wanted to go on my computer & difficulty a Trojan horse, which is on my computers (more than one computer in my house). If I don't get this fixed right away, I could lose my computers & will not work to full capascity as before the Trojan horse was built-in on my computers in the last 10 days. I was very leary about it wanted to check into that first. He said he could remember at an agreed time. So I set up to 22/05/12 at 4:30 pm p.t.. Is it a scam? This should be an international alert to all users of mircosoft for msn & email clients. They would come by phone now. SO WHAT IS GOING ON HERE? !!!

  Hello

  It's a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

   

• request for help with drivers

  Dear support team,

  I ask you to help you find the drivers.

  Hardware for generic Bluetooth adapter ID:

  USB\VID_03F0 & PID_311D & REV_0001
  USB\VID_03F0 & PID_311D

  Hardware ID device Base system:

  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  Thank you.

  Hello:

  Go to the page of the driver and support for your laptop, download and install the following drivers:

  Generic adapter Bluetooth = Driver Atheros Bluetooth or use the one from the link below.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts.Oid=5060882&swItem=ob_94298_1

  = JMicron card reader Driver base system device, or use the one in the link below.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_115195_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• request for help urgently please

  Hi to all, I have a problem with my seagate drive, that I connect with my computer and work for a time its does not appear on my computer and I have important data to the interrieur of the time I can't work well. I try to confront CELA since the computer but nothing. If anyone can help me it would me happy because my job depends on it please.

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• A request for help drawing - CS3 - My Rectangle tool (and all the variants, circle, oval, etc.) are...

  Help request - CS3 - Illustrator - Rectangle drawing tool (and all the variants, circle, oval, etc.) draw rectangles of multi which are anchored to the point where the action of drawing was started and the spacing between these rectangles is compared to how fast the mouse moves while drawing and the location of each object follows the path of the mouse.

  It's an interesting drawing effect and maybe someday an end, but I did not when I turned it on or how to get rid of.

  I leave and reopened the app.

  I removed my preferences and quit and reopened the app - it's is still there.

  All the help which can be extended to a user on the fly, trying to convert would be much appreciated.

  Yes that's correct pls check your keyboard if this tilde ~ works properly or not

• Passing values, addEventListener, request for help on the MouseEvent macro Manager

  Hello
  
  I pasted the code below. I wish to have a group of images extend and shrink the mouse hovers over it (possibly smooth, not choppy as they are now, as well as the erasure of B & W to color on enlargement - but not relevant to this question).
  
  As you can see I wrote a function separate from Grow and Shrink for each image, but it is very inefficient (I'm an old hand to VBScript, but new to Actionscript).
  
  I'm looking for a way to pass the instance in question to the function so I can use a growth and a narrowing function for all the images to be used, for example (where ' 1' is the passed element and ' whichItem' is what I'm trying to do here):
  
  galleryLoader1.addEventListener (MouseEvent.MOUSE_OVER, growImage ( 1));
  galleryLoader1.addEventListener (MouseEvent.MOUSE_OUT, shrinkImage ( 1));
  
  function growImage(event:MouseEvent,_ _whichItem_):void {}
  whichItem.x = whichItem.x - ( whichItem.width / 2);
  whichItemthere = there whichItem- ( whichItem.height / 2);
  whichItem.scaleX = 1;
  whichItem.scaleY = 1;
  }
  
  
  ... etc.
  
  When I try to pass data to the line in the line of addEventListener:
  
  galleryLoader1.addEventListener (MouseEvent.MOUSE_OVER, growImage (1));
  
  I always get errors that tell me I'm trying to compel the mouseevent on a string and the wrong number of arguments (waiting for 2). If I put two arguments in, I get a load of errors.
  
  I'm new, confused, but very impressed with Actionscript 3.0. I only work with him for about a week now and can do a lot, but this thing in particular left me speechless.
  
  THANKS for any assistance you can render so I can get this function running. The information is probably in several places, but I don't yet know enough to be able to know where or how to look for my response. Your help is invaluable and is appreciated.
  
  Best regards
  
  Dave Xanatos
  
  
  Code snippets (less the imports, addChilds, chargers and URLRequests...):
  
  galleryLoader1.addEventListener (MouseEvent.MOUSE_OVER, growImage1);
  galleryLoader1.addEventListener (MouseEvent.MOUSE_OUT, shrinkImage1);
  galleryLoader2.addEventListener (MouseEvent.MOUSE_OVER, growImage2);
  galleryLoader2.addEventListener (MouseEvent.MOUSE_OUT, shrinkImage2);
  galleryLoader3.addEventListener (MouseEvent.MOUSE_OVER, growImage3);
  galleryLoader3.addEventListener (MouseEvent.MOUSE_OUT, shrinkImage3);
  galleryLoader4.addEventListener (MouseEvent.MOUSE_OVER, growImage4);
  galleryLoader4.addEventListener (MouseEvent.MOUSE_OUT, shrinkImage4);
  
  
  function growImage1(event:MouseEvent):void {}
  galleryLoader1.x = galleryLoader1.x - (galleryLoader1.width / 2);
  galleryLoader1.y = galleryLoader1.y - (galleryLoader1.height / 2);
  galleryLoader1.scaleX = 1;
  galleryLoader1.scaleY = 1;
  }
  
  function growImage2(event:MouseEvent):void {}
  galleryLoader2.x = galleryLoader2.x - (galleryLoader2.width / 2);
  galleryLoader2.y = galleryLoader2.y - (galleryLoader2.height / 2);
  galleryLoader2.scaleX = 1;
  galleryLoader2.scaleY = 1;
  }
  
  function growImage3(event:MouseEvent):void {}
  galleryLoader3.x = galleryLoader3.x - (galleryLoader3.width / 2);
  galleryLoader3.y = galleryLoader3.y - (galleryLoader3.height / 2);
  galleryLoader3.scaleX = 1;
  galleryLoader3.scaleY = 1;
  }
  
  function growImage4(event:MouseEvent):void {}
  galleryLoader4.x = galleryLoader4.x - (galleryLoader4.width / 2);
  galleryLoader4.y = galleryLoader4.y - (galleryLoader4.height / 2);
  galleryLoader4.scaleX = 1;
  galleryLoader4.scaleY = 1;
  }
  
  function shrinkImage1(event:MouseEvent):void {}
  galleryLoader1.x = 130;
  galleryLoader1.y = 350;
  galleryLoader1.scaleX =. 5;
  galleryLoader1.scaleY =. 5;
  }
  
  function shrinkImage2(event:MouseEvent):void {}
  galleryLoader2.x = 330;
  galleryLoader2.y = 350;
  galleryLoader2.scaleX =. 5;
  galleryLoader2.scaleY =. 5;
  }
  
  function shrinkImage3(event:MouseEvent):void {}
  galleryLoader3.x = 560;
  galleryLoader3.y = 350;
  galleryLoader3.scaleX =. 5;
  galleryLoader3.scaleY =. 5;
  }
  
  function shrinkImage4(event:MouseEvent):void {}
  galleryLoader4.x = 730;
  galleryLoader4.y = 350;
  galleryLoader4.scaleX =. 5;
  galleryLoader4.scaleY =. 5;
  }
  

  What you are looking for has its magic locked in the events. This event listener that you add to each of your instances, the callback function, automatically performs all of the bulk of the work for you. This code assumes that you have named your listed instances: galleryLoader1, galleryLoader2, etc.

  TS

• Request for help with my HP Designjet 130 printer

  Greetings,

  I have owned, loved and used my printer Deskjet HP130 for sixteen years now. I do not use and would like to know if you are able to exchange for another product of your company (HP - printer, laptop or other digital material).

  My contact (deleted content)

  Kind regards

  Paul then

  You must search the HP of the trade program in and then see if there is an another DesignJet you would like to have.

  HP generally offers commercialized ins on upgrades in the same line of equipment.

• Request for help from SkyDrive

  original title: stydrive

  E-mail address is removed from the privacy *.

  Please provide more details so that we can help you.

  If you are using Windows Live SkyDrive access problems please join Windows Live Help link below:
  Windows Live Solution Center - SkyDrive

• Request for help to convert a LV5.1.1 .dll file so that I can open it in LV8.6

  I try to open this .dll (for copying and pasting from the Clipboard) I found on discussion forums. However, it is recorded as LV5.1.1 and I installed 8.6. Could someone open and convert these files for me please?

  Thank you in advance.

  Here is converted to 8.0.

• Request for help w/2 problems

  Question #1:

  I downloaded FREE Photoshop CC add on applications; Can't find applications anywhere in my operating system-

  Feedback is welcome and appreciated!

  Question #2:

  Is "File synchronization" necessary to use the apps 'FREE '?

  A response is welcome and appreciated.

  Marvin

  [personal information deleted by mod]

  I have to apologize to everyone...

  My age of 80 (dictionary) is different in my world...

  Apparently 'soft' is not a 'plug-in' and 'plugin' is not an 'app '!

  Imagine just, however, how much more simple as would be so smart "programmers" who understand perfectly the mastery of the English language, reportedly placed in position one drop-down dialog read: after the installation of plug-ins, open Photoshop, go to Windows, open drop them down dialog box and click on: Extensions -.

  Good Lord Almighty, need someone my age, retired owner of a company that has designed manuals for the recreational vehicle industry, printing to show you how to do something simple?

  I am grateful to all who responded and YES, I found no thanks Adobe programmers accidentally plug-ins!

• Working with date and time of the request for help from acrobat JavaScript...

  This coming from

  Working with date and time in Acrobat JavaScript (part 1 of 3)

  The following code adds five days to the current date, and then prints the new date in the console window.

  Get the date and time

  var rightNow = new Date();

  Get the value of millisecond

  Article date

  var msRightNow = rightNow.getTime ();

  Calculate in milliseconds, of 5 days

  5 days x 24 hours/day x 60 min / h x 60 s / min x 1000 ms/s

  Challenge of var = 5 * 24 * 60 * 60 * 1000;

  Do the calculation of var CFAbsoluteTime = msRightNow + challenge;

  Create a new Date from the calculated value

  var theNewDate = new Date (finalTime);

  In the actual work on a form code, you'll want to place the

  the object of a field value. But since this is test code, we will

  Print the result to the Console window (great for debugging)

  Console.println ("5 days from now is:" + theNewDate.toString ());

  The foregoing is the exact code (cut and paste)

  The error I get here is;

  ReferenceError: theNewDate is not defined

  1:Console:exec

  undefined

  To get the "undefined" question a lot... it seems to me, learn to distinguish the undefined 'of type' undefined 'variable' and undefined 'value '.

  in this case 'theNewDate' seems to be defined as a variable equal to the current date plus 5 days... BUT I am now "educated" enough to 'see' Why am I getting the error...

  
  

  Any thoughts... Any who...

  You need to highlight all the text that you want to run.

  You have not set the rightNow variable before you can apply a method to the variable.

  You can just add a new variable as msRightNow name. Why not use rightNow.

  Executes the code that you provided with a new departure of Acrobat, I get the following error messages:

  rightNow.getTime is not a function

  1:Console:exec

  TypeError: rightNow.getTime is not a function

  1:Console:exec

  undefined

  What you are showing probably works because your previous attempts have left behind them a variable "rightNow" and as long as you do not have the object of time date change too much, you will not notice the error.

  Cleaning of your code:

  get the number of milliseconds of the date object.

  rightNow var = (new Date()) .getTime ();

  define 5 days in milliseconds;
  Challenge of var = 5 * 24 * 60 * 60 * 1000;

  Add 5 days to the value of this moment and assign the result to the last time;
  var CFAbsoluteTime = rightNow + challenge;

  convert finalTime value in a date object.
  var theNewDate = new Date (finalTime);

  display the result;
  Console.println ("5 days from now is:" + theNewDate.toString ());

  Have you tried the code that I provided, it is another way to add days to the date object.

• Request for help with page apex a button popup.

  Apex 3.2/Solaris 10
  
  I try to open a page of the apex (report) in a pop-up window when a button is pressed after the plethora of examples in the forum.
  
  I applied what follows in "Edit Page buttons" to one of the 'attributes of button' and 'Target URL' is trying to open my report (page 14) in a pop-up window.
  
  javascript.popupURL ('f? p = & APP_ID.:14: & SESSION.) ") ;
  JavaScript.popup2 ('f? p = & APP_ID.:14: & SESSION.) ") ;
  Window.Open ('f? p = & APP_ID.:14: & SESSION.) ") ;
  
  I have also implemented the conditional branch for this button in order to mitigate the error 'page not found - restart the application.
  
  The window.open variant does not. The javascript 2. variants open the page, but in the same window (no popup).
  
  also, I read that to fill my pop-up report (it should), a Window.Close (); should be somehow associated with a close button on the popup page. Specifically, where this code is placed?
  
  Thank you!
  
  Paul

  Paul:

  Specify the URL as

  JavaScript:popupURL('f?p=&APP_ID.:14:&session.');

  Instead of

  javascript.popupURL('f?p=&APP_ID.:14:&SESSION.');

  CITY

• Request for help with the output of a script

  Hello

  I need assistance with the output of a script. I have a script that retrieves advanced config of the esx hosts in a cluster and exports to a txt file. Here is the script I use:

  $Decimals = 1

  $VCServers = @)

  $VMSummaries = @)

  $InputFile = "VCs.txt".

  1. Read the input file, loop of VCs

  Foreach ($VCname in Get-Content $InputFile) {$VCServers += $VCName}

  Foreach ($VCServer to $VCServers)

  {

  $VC = to connect-VIServer $VCServer

  $VMhosts = get-VMHost

  Foreach ($VMHost to $VMhosts)

  {

  Write-Progress "Collecting information in $VCServer" 'connecting to host $VMHost' - Id 0

  $VMSummary = "" | Select the host name, TCPIPHeapMax, TCPIPHeapSize, HeartbeatTimeout, HeartbeatFrequency, HeartbeatMaxFailures, MaxVolumes

  $VMSummary.HostName = $VMHost.Name

  $VMSummary.TCPIPHeapMax = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name Net.TcpipHeapMax). Values

  $VMSummary.TCPIPHeapSize = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name Net.TcpipHeapSize). Values

  $VMSummary.HeartbeatTimeout = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatTimeout). Values

  $VMSummary.HeartbeatFrequency = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatFrequency). Values

  $VMSummary.HeartbeatMaxFailures = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatMaxFailures). Values

  $VMSummary.MaxVolumes = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. MaxVolumes). Values

  $VMSummaries += $VMSummary

  }

  }

  $OutputFile = "AdvancedNFS.txt".

  $VMSummaries | Format-Table | Out-file $OutputFile

  This script runs without any problem and generates a text file that looks like this:

  TCPIPHeapMax TCPIPHeapSize HeartbeatTimeout HeartbeatFrequency HeartbeatMaxFailures MaxVolumes hostname

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  abcd1 abcd2 abcd3

  I am trying to output a csv file and run into a problem where each host values are not displayed correctly. I replaced the last 2 lines in the script as follows:

  $OutputFile = "AdvancedNFS.csv".

  $VMSummaries | Export-CSV $OutputFile

  My output looks like this:

  Host name	TCPIPHeapMax	TCPIPHeapSize	HeartbeatTimeout	HeartbeatFrequency	HeartbeatMaxFailures	MaxVolumes
  ABCD1	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection

  What I am doing wrong?

  Thank you

  Alex

  Hello

  You can try changing your script like this:

  • -Replace "." "With values '-["'-']. "

  • -Optimize calls to Get-VMHostAdvancedConfiguration

  Your code will look like this:

  ...

  Write-Progress "Collecting information in $VCServer" 'connecting to host $VMHost' - Id 0

  $VMSummary = "" | Select the host name, TCPIPHeapMax, TCPIPHeapSize, HeartbeatTimeout, HeartbeatFrequency, HeartbeatMaxFailures, MaxVolumes

  $VMSummary.HostName = $VMHost.Name

  $VMHostAdvancedConfig = get-VMHostAdvancedConfiguration - VMHost $VMHost - name Net.TcpipHeapMax, Net.TcpipHeapSize, NFS. HeartbeatTimeout, NFS. HeartbeatFrequency, NFS. HeartbeatMaxFailures, NFS. MaxVolumes

  [$VMSummary.TCPIPHeapMax = $VMHostAdvancedConfig\["Net.TcpipHeapMax"\]

  [$VMSummary.TCPIPHeapSize = $VMHostAdvancedConfig\["Net.TcpipHeapSize"\]

  $VMSummary.HeartbeatTimeout = $VMHostAdvancedConfig\ ['NFS. HeartbeatTimeout '\] '.

  $VMSummary.HeartbeatFrequency = $VMHostAdvancedConfig\ ['NFS. HeartbeatFrequency '\] '.

  $VMSummary.HeartbeatMaxFailures = $VMHostAdvancedConfig\ ['NFS. HeartbeatMaxFailures '\] '.

  $VMSummary.MaxVolumes = $VMHostAdvancedConfig\ ['NFS. MaxVolumes '\] '.

  $VMSummaries += $VMSummary

  ...

  Kind regards

  Dimitar