Issues related to the parental control
When you try to view the content on Apple TV apps, you may consider some episodes. He said that you are not allowed to view this content. Set parental controls. We have not enabled our parental control; all restrictions are disabled. Any thoughts?
Restart your Apple TV.
To restart your Apple TV (4th generation), go to settings > system > restart.
For Apple TV (3rd generation and earlier versions), go to settings > general > restart.
Tags: Apple TV
I have my setup of parental control to block access from 22:00 to 09:00 however, it does not automatically access when the time changes to time 'unlocked '. Curiously, it still shows the message 'parental control block. I have to disable the parental control to allow access to devices after 9:00 and then it must reactivate at 22:00 to block access again.
I've also updated the latest firmware (18.104.22.168129). It does not seem to be 2 versions (V1.0 or V1.1), however, these two seem to be the same file. I used the correct version for my router (V1.0).
I want to stay with what you have for now and look to see if it works on some devices. Check that the clock on the router is configured correctly. See also if certain sites are blocked and others not. I think there's a bug where some sites using https:// is not to be blocked but http:// did. It worked correctly before the upgrade? Remember you of what was the old version? The cancellation is made by the interface of the router and there is a button to restore but still, if restore you an unwanted version which isn't good either. Better do small things first.
My child to bypass the parental control on his Macbook Air using the method presented in this video tutorial. Is there a way to avoid this? https://www.YouTube.com/watch?v=Br6wKR28jFo
With the text of the video section, the way used by the author to exploit the single user Mode
command line is specified; and it has been done before. Don't know if there are more recent methods
to try to deter the child since the creation of their own Admin account to bypass the controls that
those already discussed adjacent older sons, like this:
Although it is possible to learn how and use the Open Firmware password, to attempt to get the Admin acct
This could also be overcome by a particular person looking to exploit a work around physical access.
In the past, some computer models were easier to open and to perform tasks that could derail this method.
Almost any iFixit or removable guide could be useful for a particular child or student, as a work-around.
See suggestions on how to apply the Firmware password, as well as the means to
block access to the material or the way to reset the admin by OS X Recovery password, in news
OS X versions that use this partition and its utilities. It is part of the problem with the Admin
operation, the user is physical access to the computer. And why remotely hacking is very difficult.
While I have no other suggestion (knowing that there could be a fairly simple method to work around the)
and most have been published online for several years) I hope that someone will see & respond to your
question with any method you can implement. Or see if an Apple Store genius bar can help you
This question, because it creates problems. I'd be sure to make an appointment to discuss this at the store.
If no official Apple retail Store is available, you should perhaps consider a call to Apple support or use a
online chat. Don't forget to mention details about the build year computer, etc. & the version OS X in it.
You can choose to make submissions directly to Apple's comments on this issue, if you find that it is not effective
method of maintenance determined children or young adults to change their own Admin computer.
One of the comments below links is probably more suited to this topic than the other:
Contact Apple support
Need service or support? Start your online application and we will find a solution.
More ways to get help:
- Contact iTunes Store support
- U.S. iPod, Mac and iPad technical support: (800) APL - care (800-275-2273)
- Technical support for iPhone in the United States: (800) MY-IPHONE (800-694-7466)
- See all phone numbers around the world
Since there is no response when I first noticed your thread, I asked guests move it more appropriate
location for visibility in these discussions of support; so they chose to put it in the section of MacBook Air.
Good luck in this case!
As a developer of software using languages and platforms of Microsoft, I understand how planning works in an application. Why should I upgrade to Windows 8 to get the opportunity to restrict access timed to a PC safe family 30 minutes increments? This is no logic, except if it is half cooked to inform users to upgrade. This is a feature I've wanted since we began using the parental control and I can only assume the developers actually do not use the product, they have created because it really shouldn't been missed for this long. It should also be a simple change in the code to check every 30 minutes instead of 60. Maybe the team of parental controls overlap or had their budget reduced to the point that they cannot make such a simple plus change. I understand, I am in the software. I know it's less than constructive but it's annoying to know different. It's annoying to 'upgrade' to 2012 Essentials see virtually no difference in the features. Your users are not YOU!
Sorry for the inconvenience. You can send this as a feedback through this link on our product team to be aware of issues and suggestions from users of the products.
Summary of the issue
Other issues of Windows Live family safetyWhat version of Windows Live Family Safety do you use?OtherChoose your operating system version:Windows 7
My account has been stolen by the intruders
Recovered by the messaging solution...
Note that the account has been mentioned has been added to the parental control
And I ask to remove the family safety account to the intruder
My account is used for
We have completed our investigation of the issue you reported. I am pleased to inform you that the problem should be solved, and you should now be able to use your account correctly.
Note: If you are still unable to access your account, maybe it's because the client Windows Live parental controls installed on your computer that retains the restriction on your account settings. In this case, I suggest that you uninstall the client on your computer. Please see this link to uninstall.
Computer of my son is running Vista and I set parental controls in place through the administrator account, there a nonadministrator account.
I changed the password after that we had a few problems with the controls, and now I want to change the settings again. However, the old password allows for parental control (IE, he allows his account access websites and bypass control, etc.), but when I try to access the administrator account, it says the old password does not work. When I enter the password, account says I don't have the login procedure and kicks back me to the main screen of Vista (where I take which account to enter).
So, I'm stuck administering the account due to a conflict in the parental control passwords. If I try to reset the password, the computer ask me a USB stick with the old password on it information. It is a step that I did not.
Any way to disable the administrator account? Or somehow remove/reset the parental control account access restrictions that I am experiencing?
"when I enter the parental control in the non-administrative account, the system simply ignores the password that I entered"
I suggest you read this info below on who has access to parental controls and how it works:
Link above has a very good tutorial on how to set up Parental controls.
Also, read the tutorial above and the 'Related links' tutorials to vistax64.com.
See you soon.
Mick Murphy - Microsoft partner
I installed on my Win7 parental control computer. When I want to see how the computer was used, I can choose any date for the past two weeks, but I need to see overviews since I first installed the program. How to choose freely the dates?
Related to: Family Safety: frequently asked Questions
Unfortunately, one look at more than 2 weeks is not available in the parental control.
You can provide us your comments by filling in the feedback forum.
Hope this information helps.
I have family safety installed 2011. On my summary page, it says "this computer does not have the latest version of the parental control. Install and set up parental controls"how to upgrade to the latest version?Hello
If so, then the question you posted is related to Windows live and will be much better suited in Windows live forums. Click on the link below.
- Windows live family safety are you referring?
Windows Live Solution Center
I have the internet Charter. I am a home user. I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available. Again, I am a home user. What does that mean?
1. which user account you are using for Parental control (Please note that you cannot apply parental controls on a user admin account? It can be applied to standard user only accounts)?
2 have you made changes on the computer before this problem?
I ask through the following article to find out how to set up Parental controls:
After completing the above links persist issue please fallow the mentioned below of the methods.
Method 1: Disable UAC (User Account Control) and check the result
Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
Important: Enable UAC after you complete the steps.
Method 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
Hope the above information is helpful.
I just installed macOS Sierra today on my 13 "Mac Book Pro (early 2011). I have only one user account that is an administrator account. Siri is not enabled on my machine. When I go to the Siri system preferences screen, it says that "Siri is disabled by Parental control. Hmmm, when I check the Parental control screen, it says "you logged in using an administrator account." You can only apply parental controls to accounts that are not administrator accounts. »
What happens here?
Same problem here. Updated for Sierra of El Capitan on MacBookPro 15 "(mid - 2014).
Even if I toggle the checkbox on the Parental control > others > disable Siri & dictation I can't activate Siri, the checkox is always gray and the alert says "Siri is disabled by Parental control.
Siri is enabled if I login as a burst, but I need it on my Admin account of course. Very annoying.
I created a user account for my child. I am able to access the internet through firefox. Then I set the parental controls and can NOT access the internet more. I turn off parental controls for this user account. I still can't access the internet from this account.
Parental control is a part of the operating system Windows and not Firefox. You can get help here: http://support.microsoft.com/ask-community/windows/
I can't find the parental control on Firefox android.
There is no parental control for firefox. You can however get a parental control as app of Google game store that applies to the system-wide.
I can't connect to Windows Live Family Safety with my existing Microsoft Account.
I enter the e-mail address and password and click the Sign In button, and then get an error message saying "the e-mail address or the password is incorrect."
The e-mail and password are correct, then why can't connect? I used to be able to connect to OK.
- This happens on two different Windows 7 laptops. I rebooted, cleared history, etc., and this did not help.
- I checked the e-mail address and the password several times (case is correct, that shift caps lock is not on, etc.).
- My address e-mail/Microsoft account is not an address Outlook.com, Live.com or Hotmail.com - it's my own domain, something like<*** email="" address="" is="" removed="" for="" privacy="" ***="">***>
- The Microsoft Account works for all other applications and web sites on my computer Windows 7 mobile, phone Nokia Lumia 920, Lenovo ThinkPad 2 compressed (Win8).
- This Microsoft Account <*** email="" address="" is="" removed="" for="" privacy="" ***="">works very well for Office 365 Home Premium.***>
And the solution is...
Disable the verification of two steps in the security settings for information on live.com.
The parental control client cannot authenticate because he cannot ask the authenticator application code. Can't Movie Maker or one of the other applications of Windows Essentials .
Awareness in two steps of authentication must be added to the Windows Essentials applications.
FSS.live.com redirects to the page write-up on how to configure security for the family and how great it is:
But the real family safety Portal went, and I can also tell you that emails of status stopped containing something useful, a week or two ago.
Help! Thank you!HelloThanks for coming back. Since you are redirected to the link you provided, it is possible that your account is not yet configured or the configuration of the parental control is removed. To resolve this problem, please follow the steps below:
In addition, I have divided your request for help us to you.Let us know the results later.Thank you.
- Open the client of parental controls on your computer.
- On the upper right side of the parental control window, click the icon to get the latest settings of the site .
- After a few seconds, it displays a dialog box saying that there is no accounts on your computer. Click set up the Family Safety. If the dialog box has not shown, just, close the client and reopen it.
- Connect again to Family Safety using the parent account.
- Follow the on-screen instructions to set up parental controls.
- Come back on the Family Safety website and change the settings according to your preferences.
- Reopen the client of parental control, and then click the icon to get the latest settings from the Web site once more.
When I connect to the Windows Live Family Safety website, it shows the opinion (in the title above) recommended that I upgrade to a newer version. Next to this notice there is a link that says... 'install and set up parental controls'. When I click on it to try to upgrade to a new version, need me a Windows Essentials page where it says nothing about an update.
An attempt to update, I clicked on the symbol "Refresh" in the upper right corner of the programs parental control on each of the monitored computers, and all say they are refreshed and updated. What is going on? Why he continues to say that they all need new versions?
PS. I am running Windows XP and control parental version 14.0.8118.0427.
We are happy to assist you with your concern. I understand that you wonder why the message shows up on the Family Safety website.
The notice comes when it detects an older version of the parental controls installed on your computer. The latest version should be 15.4.3555.0308 for the 2011 version and 16.4.3505.0912 for the 2012 version. Since you're using the 14.0.8118.0427 build that is the 2009 version of the parental control, the site detects it as obsolete. Please note that the only Essentials 2009 version can be installed on Windows XP.
If in the cases, it affects services and parental control functions, please let us know if we can help you.
Maybe you are looking for
I did not open iMovie in awhile. But I have about 7 or 8 films I've done and have been recorded in the theatre of iMovie. When I go to the tab 'Théâtre' in iMovie, it is empty. The cloud at the top right contains the symbol bit not connected. I d
Hi guys, I just bought iMac 27 "i5 3.3 with radeon M395 2 GB 5K, I would like to know if I can connect my monitor LCD Philips that runs at 1920 x 1080 as a second monitor 27" and if so, what cable connection should use. Thank you very much in advance
I recently changed my password of the Hotmail account. Windows Live Mail could not send or receive Hotmail account after password change. I deleted the account Hotmail to Windows Live Mail and once again re-installed. Now when I try to download the f
Hello community, I need to install windows 7 pro on my brand new IdeaPad. But still, when I start installing windows from USB, it is said: no hard drive. Can you tell me, what is the right driver from Intel for the installation of windows 7 pro in RA
Hello I write this message for tips and out of my concern for the current state of the eclipse for JDE plugin. As a newcomer to the development of blackberry, I tried to optimize a process for the development team to make their job a little easier, m