Issues scan MF416DW

Similar Questions

• Issue scan fingerprint with Win 7 and Satellite Pro A300

  SORRY, MODEL IS A300.

  Bunk/upgrading Vista to Windows 7 Professional and we found the fingerprint reader does not.
  Unable to remove program and custom accept the new installation of fingerprint reader or even of new fingerprints to be scanned. (Former Vista program works in background somehwere?)

  Is the fingerprint reader, which was installed under Vista now not compatible with WIndows 7.
  It seems to be still no upgrade or downloads for fingerprint drivers for Windows 7.

  Post edited by: lasdec1

  Hi mate

  To be honest, I doubt that Win 7 drivers would be published for this good old classic.
  I mean the Satellite Pro A30 is an older series and even Vista drivers have not been released for this series of models
  I searched on the European driver Toshiba page but I found only the W2k, Win XP drivers for this device

  So if you want to use Win 7 on this laptop, then you need to collect the drivers of your own hands and it would be the same with the fingerprint reader. Maybe the pilot designed and released for other series would work.

  It seems that Toshiba is in the version of the driver for different series you can take a look at the different series and might try the drivers.

• issue scan MX 922: pc game to start pacanning messages

  I looked through some of the suggestions for this problem. Nothing has seemed to work so far. I use windows 7 pro and when I try to scan directly from the printer it reads the same message that you all mentioned.  After studying a bit, when I open the quick menu Canon all the options of the scanner even are not here... as if she does not at all a scanner.  I have no problems printing fair analysis. Oh and my printer is directly connected to the computer via a usb connection.  I also tried to reinstall the software recommended Canon mx920 series and when he tried to install it says that it has not detected a printer...? I'm bafflled. Help, please.

  Hi KrisGriff,

  Given that the printer was not detected when reinstalling, if Please temporarily disable any antivirus or firewall software on your computer and then try to reinstall the printer, because these programs can sometimes prevent printing be detected during installation.  If you have another USB cable that you can use to connect to the printer, we recommend you try that as well, as sometimes USB cables lose their effectiveness over time and can lead to intermittent connectivity problems.  Please remember to also have plugged USB cable directly into a USB port on the back of your computer, instead of via a USB hub or other device connected to the computer.  If you are still experiencing difficulties with the printer or a scanner be detected, please call or send us an e-mail by using one of the methods on the page contact us for further assistance.

• issue scan

  I use my HP LaserJet M1217nfw MFP Pro to scan documents.  If blue ink used on the document, then I have to scan in color but the file is too large.  I can only have a file with 3MG, but this file is 3.7 MG.  My file must be in a pdf file to download on my request.

  How can I configure the scanner to resize?  Should I scan my document in a .tif and then y at - it software to change size?  I often have this problem.

  Thank you.

  Yes, you can change the resolution. You can scan in grayscale or black and white levels. You can also change it to tif.

• HP Photosmart 2610, issue scan

  Bob_Headrick wrote:

  "I have a Photosmart 2610 and all its features work under Vista.  I would not use the update checking tool, I would say dowdownloading and install the full featured driver from the Internet HP here site.

  Kind regards

  Bob Headrick, Microsoft MVP printing and imaging"

   

  Link to thread

   

   

  I used the suggestion of download above driver for my printer and vista OS. USB is connected. Everything works great thanks for this Bob, but I find the scanner slow to load pictures on my computer and I wonder if the pilot is good download to my machine and device because of this. Or is this normal?

  I want to use it for multiples [50-100 images in one session] download for ebay ads and think I should go back to the use of my digital camera, but the scanner gives a better picture. Any way to speed up the scanning process?

  Thank you

   

   

   

  

  am arrived on this page "at the top", I found this download scans much more quickly done route and downloaded the doctor of the scanner printer here of the site indicating that I had to make something better... I forgot what it was for, but shes working sweet now

• Issue scan Photosmart 7520

  The cycles of scanner on about every hour. Is this normal and if so is it possible to stop it.

  Hi Mechpilot,

  That fixed the problem. !

  Thanks for all the help.

• Laser Jet Pro MFP 177fw: cannot scan with Laser Jet MFP 177fw Pro

  I have been using my 177fw Laser Jet Pro MFP on a Mac 10.10 for awhile.  Print, fax & scaning all worked.  I can scan is no longer.  I get the message "the scanner has not completed analysis" (there may be another message before that but it crushed until I read.).

  I use a USB cable for the connection.

  On August 31 I got HP Printer Software Update Verson 5.  What is my problem?

  Thanks for your help.

  Hi @scg117,

  Welcome to the HP Forums!

  I noticed your post about how you can't scan with your MFP HP Laserjet Pro 177fw on your Mac. And I'm happy to discuss this issue scan for you!

  To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer?

  To copy:

  1. load the document on the scanner glass according to the indicators on the product.

  2. close the scanner.

  3. on the product control panel, press the button number of Copies.

  4. Select the number of copies.

  5. press the black start copy button or the button color launch copy to start copying.

  Let me know if it works, or if you see another error message.

  If the copy works, then try the steps described in this guide, Scanner USB connection is lost (Mac).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• hp2540: error with Hp2540 series scanning AirPrint

  I'm trying to scan documents and I get the following text:

  Scan reported that an error HP2540 series is currently unavailable. Please check if it is connected or turned on and try again later

  I went into the settings and I couldn't do anything with computer scan but Webscan seemed available but I don't know what it is. I tried it, it seemed to scan but there is no option to save. So I do not know if it is scanned or where to find the documents. I did turn off the printer and turn it back on. This sometimes happens, and there is no rhyme or reason to when and why as far as I can tell.

  Any ideas on how to get it to work again?

  Hi @clenny,

  Welcome to the HP Forums!

  I understand that you can not scan with your printer HP Deskjet 2540 on Mac OS X. I'm happy to discuss this issue scan for you!

  A few questions for beginners:

  1. You are able to make copies with your printer? Copy the text or mixed Documents.
  2. What version of Mac OS X are you using? If you do not know the operating system you are using, please visit this site. Whatsmyos.
  3. How is the printer connected? USB or wireless?

  In the meantime, please consult this guide to scanning, 'inaccessible Scanner' or ' year error occurred while scanning "message for HP Deskjet 1510, 2540 Deskjet, Deskjet Ink Advantage 1510 and series printer Deskjet Ink Advantage 2545.

  Hope this helps, and hope to hear from you soon!

• HP 7610: lines to scan hp 7610

  I get a line when I scan using the ADF for my HP 7610. I checked where it appears and it does not appear until a roll it seems there is something in there, causing somewhere this line. I've included a picture where the line is displayed. Any help in how to clean the ADF to eliminate the line?

  

  Hi there @gemarino,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the line on the copy or scan. I'll be happy to help you.

  If you make a copy of the glass, not adf, do you still have the line?

  If none is not an issue scan, but ADF glass question. Dirt, dust, or something on the ADF glass will show a line to the bottom of the page.

  Make the top of the page and copy black of the ADF.  This page of output line on glass surface facing upward and the top right.  Follow the line to the glass of the ADF on the left.  Clean the glass very attentive to were the line is on the page of th.  Copy a blank page to see if the line disappeared.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Network scanning multi-page Officejet Pro 8500 a w/o ADF (Vista and HP Print software)

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  My version of Vista is 6.0.6002 Service Pack 2 Build 6002.

  My HP Officejet Pro 8500 has e-all-in-one printer - A910a is the standard model, for example, the premium product of mid-range. It is connected by LAN cable. It scans, prints and can provide the status of ink level.

  The 8500 is connected via the network, and on a Vista PC, I use a desktop icon to launch "HP Officejet Pro 8500 A910.exe". The new software is very different from the [Photosmart c6150 dead] [uninstalled] old HP Solution Center, and I looked in the new textbooks at least briefly, so I hope someone can same thing me some time with a basic question/issues scan. My research forum has failed, but if someone has a link to a relevant thread, that would be appreciated.

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  I also tried scanning browser based and there is a drop down for sweeping on both sides, but the drop down menu is not activated and cannot be used.

  I only went through the configuration of the network folder, which may be necessary to get the ability I want. On this subject, I wonder if I set up a folder for all users, or just for my login.

  Thanks for any help!

  Success?

  Well, I created a folder network and was then able to scan to a PDF file of several page without using the ADF (ADF) documents.  To do this, (1) install the software provided with the Officeject Pro 8500 has, (2) the installation program a network folderand (3) run the scan of the touch screen located on the Officejet Pro 8500 has.

  (1) install the software supplied on CD (or probably downloaded from somewhere near here). You may be able to work with only the web browser interface, but I wasn't before install the software provided on the CD, and I suspect that some software is required on the PC.

  Install the downloaded software or the software provided on the CD-ROM titled

  HP OFFICEJET PRO 8500

  A910

  (2) Setup a network folder. The installation of the software created a few new icons on my Vista PC.  Double-click the icon of the desktop titled "HP Officejet Pro 8500 A910". On my Vista PC, it runs,

  "C:\Program HP HP Officejet Pro 8500 Officejet Pro 8500 A910.exe A910\Bin\HP"

  An application window should appear. Mine has a title, "HP Officejet Pro 8500 A910 (network).

  The application window has a section of Scanner Applications on the left. From there, the scanner to the network folder Wizard. Which can be done by double clicking on the 'scan to network folder Wizard"or by the first double clicking on"Scanner Actions"and on the screen that appears, click on"Scan to network folder Wizard.  Otherwise, you can get this done through the web browser, if you know the URL for your device's built-in web server. Because I use my DHCP router (to allocate IP addresses in my local network), I currently access the 8500 a of http://192.168.1.19/. From there on, I can access the Scan tab, and I can access the ability to "Setting up the network folder" on the left.

  Using the scan to network folder Wizard, I clicked on New and used the Browse button to select "C:\Users\Gordon\Documents\My Scans" to set up a folder named "Gandalf Gordon". The next page of the wizard, it will take your network password (or local password if he is counting on the local PC) required to access the PC where the path "C:\". "sailed above is located. When I clicked on finish, the wizard opens a web browser which indicated a certificate error. I chose to continue to the site, which turns out to be the web server integrated in the 8500 has. So now you know a URL where your built-in web server on your network if you were already uncertain. If you do this URL a favorite browser, the favorite should work even if the IP address of the 8500 a is changed in the future.

  Display (3) initiated a sweep of the touchscreen located on the Officejet Pro 8500 a. tap the icon "Scan." Tap the 'network '. Select the network folder. Place a page to scan on the glass of the scanner without using the automatic document feeder. Press 'Start Scan '. When the touch screen prompts, "Page another Scan", select 'Yes', place another page on the scanner glass and click, 'Start scan '. When the last page is analyzed, answer 'No' to the prompt "scan another Page.

  Note: When loading pages additional manually, you have to work a little faster or unit will then expire and close the file with as many pages that you managed to scan. I did three pages as a test.

  If there's a better solution out there, please share!

• HP OFFICEJET 5600: UNABLE TO SCAN

  Can I print using my HP Officejet 5600. When I open the Solutions Center to scan or another function, it displays a printer I use not i.e. HP Officejet 5600 Series Fax. Please tell us how to change the setting for HP Officejet 5600 so that I can scan.  In the control panel to the correct printer is online and designated as the default.

  Hi there @Shirlene888 , welcome to the forums!

  I saw your post on your Solution Center showing that the fax driver and that you can not scan.

  I would say first of all that is running the print and scan doctor. This diagnostic tool will check for all the conflicts that could be the cause of the problem and try to fix them. Then try to scan and if the tool has problems, made me know what they are in your response.

  If the diagnostic tool has not fixed the issue scan, try to completely uninstall the printer software, restart the computer to complete uninstallation, then download and install the complete driver under the following link. You will need to select the mode of "5600" you have in the list: drivers & software

  Good luck!

• HP Envy 4500 will not scan to the MacBook Air Yosemite 10.10.3

  My printer connects wirelessly with my MacBook to print. It seems perfectly fine copy.

  However, the scan will be get no MacBook computer a friend and scan to it and refuses to scan at mine. I tried printing via system preferences > printer and scanner, tried to remove my printer and add it again to the impression that tried to download drivers for Yosemite to find that the error in the application downloaded impression told me that airprint was not working and the scan could not be completed. On my printer, my computer was never seen on screen as one scan to. How to solve this problem?

  Hi @LSarah,

  Welcome to the HP Forums!

  I noticed that you cannot scan with your printer HP Envy 4500 on Mac OS X 10.10 Yosemite. I'm happy to discuss this issue scan for you!

  Please, try the procedure described in this guide, connection error shows then scanand let me know what happens!

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP 7520 AUTO SCAN POWER PROBLEM

  I use the auto power feature to copy a document of several pages, but when I scan the same document to the computer produces only a blank page. The page of the printer reports a successful computer analysis, but when the document is opened in the computer there is only a blank page.

  Hi @ABELINC ,

  Thank you for visiting the Forums HP's Support and welcome. I have read your thread on your printer HP Photosmart 7520 and don't get to scan to the computer. Here is a link to the HP print and Scan doctor. Print HP and the Scan doctor will be running a check of your system and your printer to make sure that all the drivers and software are installed and up to date for the scan.

  Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary energy source, as this may cause the issue scan.

  Hope that helps you to analyze.

  Thank you.

• ePrint scan to PC file can not find the PC on the home network. How can x HP 6510 find PC?

  Issue scan to a file.

  Hello

  This is for Windows:

  • Click the icon on the desktop printer,
  • Click Manage Compuer scan,
  • Click Activate.

  I hope this helps.

• OfficeJet 6310xi does not scan in Windows 7

  I have an Officejet 6310xi on a home network.  Works very well on all the machines, with the exception of my new spiffy office.  Windows 7 family premium, completely updated, using the latest version of the HP solution for 64 bit Win7 Center.

  At issue: scan seems to work almost perfectly, completely, as expected, completely past the preview & finish. After pressing the finish, there is a pop up window that says it saves the file, the progress bar goes 2/3 of the way across, then zone blinks away and I'm back to the solution Center window.  When I go to the target location, there is no file.

  I did all the obvious things that I have and HP help can think - uninstall / reinstall, make sure that the firewall (Norton 360) allows all programs hp, etc.   I'm not looking for the right place for the files.  At the present time, he is trying to save to my analysis, but I tried other paths of access to record in, no luck.

  Any suggestions?

  Other news-

  This computer and the printer are connected to the router by ethernet.  Other Win XP computers at home are wireless.  They work very well.  In fact, I keep a laptop old dying just so that I can scan to it (a PITA).

  The only feature that I see on the Win7 machine, other than the missing files, is that the Solution Center appears when I load a document.  It appear on other (Win XP machines).

  I realize there are problems w / Vista scan with faculties communication weakened through the well-known HP Solution Center.  I'm not aware of any known issues like this in Win7.

  Hello!

  Go to this site ftp://noscnfil:[email protected]/ then download the hpqxmlul.dll file and save it on your PC.

  After download copy the file to this location "C:\Program Files \Digital Imaging\bin" If you use windows7 32 bit but if you use windows7 64 bit then copy it to this location "C:\Program Files (x 86) \HP \Digital Imaging\bin.

  Good luck!