Issues wireless adapter on XPS13 on Windows10

Similar Questions

• Envy 14-3010NR wireless adapter issues, this is a strange...

  Hello, I have a 3010NR Envy14 spectrum with Intel Centrino Advanced N6230 wireless adapter. Driver is 15.9.0.5 dated 16/06/13 dated. I've updated the operating system first to W8 and then to W8.1, since I had problems with the wireless, I had to work at some point after the update of the bios F.06, then when I started the other day, wireless.

  I have search in the diagnosis of F2 and it says that the adapter is not installed, when I do a test of component... However when I go to Device Manager / network adapters / click on display / hidden devices, this is, when I look in the properties, he said ""currently this hardware device is not connected to the computer"(code45)". "" To solve this problem reconnect you this hardware device to the computer.

  I also have the same problem with the wireless button on the keyboard that I see a lot of people, when I press on it now it switches airplane mode on and outside, where it is used to turn the WiFi on and off... It's always a white light, the orange light that lights up when wi/fi was off is now gone...

  Notice to fans, it's really weird... Thanks in advance

  Hey jagnewr,

  Thank you for all the information in your message. For the error code that you get in the Device Manager, it means that the device is connected is no longer http://bit.ly/18I67As.

  I've included the manual 'Guide to Service and Maintenance HP ENVY14 SPECTRUM'. Please open page 52 and follow the steps to remove the WLAN module. Remove and reset the module.

  If you are still not able to connect, and the error code 45 is still present it most likely that the wireless card no longer works.

  Good luck!

• How to activate the wireless adapter

  I currently have a HP Pavilion 17 computer laptop with Windows 7 Professional.  A few times in the past in the unit's wireless adapter stopped working.  I don't remember what I did to get it working again, then however at this time I can not activate even if I followed all the steps to change the settings of the adapter on the network and sharing Center.  When I select Connect, it simply shows that it is not connected.  Nothing I have tried seems to help.  I have a unit of Belkin Wi - Fi that works and my laptop runs as long as I have an Ethernet cable connected.  However if I disconnect the cable from the laptop does not connect via wireless adapter.  In the past he would always stay connected to the Wi - Fi connection even if I disconnected the cable.  Please give me any thoughts you had to solve it.  Thanks in advance for your efforts and help.

  I just wanted to know that I found the solution to my problem with the help of a response of the same issue posted last year.  Repeated pressing the F12 key with the picture of an airplane on the wireless card.  Forgive my ignorance, but thanks to all who took time to try to help me.

  OldmanDon

• Satellite Z830 - drop out Wireless adapter / conflict with USB

  My Z830 Satellite has a weird problem. Wireless connectivity works well until I have plug in a usb key into the usb port 3 on the side. The wireless, then falls after a period and then it does not find the available wireless connections. It effectively kills the wireless adapter, or at least makes it less reliable.

  You must restart to recover the connection. I tried with several different usb storage devices with the same result. Both wireless and usb drive work fine, but not at the same time. This occurs regardless if the use of the battery or when it is plugged. I checked the power settings to ensure there wasn't a problem there. Everything is right on install/factory in general settings, so I can't imagine that's all what I changed.

  I'm at work, but I'll see if I have the same problem with the usb at the back, or a disk takes hard usb powered, when I get home. It's really annoying, because you cannot use the net and let in a usb disk without risking a fall on the. I haven't checked messing around with settings of USB root hub or from IRC, as it seems unlikely. Any thoughts or is a matter of "give it back to Toshiba" - I'd rather not have the downtime. It took me a while to work on this has been the problem.

  The wireless connection is very strong when the ultrabook is used, so is not a question of signal strength.

  Hello

  To be honest, I've ever read on similar issues.
  Did you check if the problem occurs with other ports USB or does it use a special port of Z830 Satellite?

  In your case I recommend also using HARD drive recovery option and to set the system back to factory settings to make sure that there is no software related issue.

• Wireless adapter for Thinkpad R61I

  Hello

  I have a laptop Lenovo Thinkpad R 61i bought in India.

  I wanted to know if I can install a wireless to this machine to use adapter.

  If the answer is Yes, then please suggest me that make recommendations and the model of the wireless adapter for buy.

  Any help would be appreciated.

  Hey guys,.

  Well, finally it seemed to have sorted the issue myself. After both to investigate and navigate the lenovo site, I decided to tear down the laptop.

  I mean remove the foot screws and check what the question was... I locate the Wifi adapter that came with the machine and took note of the brand and the model.

  After that the hunt for the pilot Bernard who took hours but finally a 246 MB file was found on the lenovo site and after installing BOOM I my work wireless as never before.

  However I place an order online for an internal wireless adapter that encrypted on INR 1662, a waste that I'm trying to cancel.

  in any case its all fixed now and the need to go wireless... Well done to everyone who helped with this problem.

  Good bye...

  The India Anil

• wireless adapter keeps blocking down is my grilled adapter windows guard resetting, but it always stops

  My keepps wireless adapter window line to hit me back it but after a few minutes I connection loose again what is happening

  Hello

  ·         What operating system is installed on your computer?

  ·         You did changes to the computer before the show?

  Method 1:

  I suggest that you put the computer to boot and check for the issue:

  http://support.Microsoft.com/kb/929135

  Note: Place the computer back to normal when you have completed troubleshooting by following step 7 from the link above.

  Method 2:

  I also suggest you to remove the security of the wireless network and check for the issue:

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Note: Make sure to put the protection of the security on the wireless network when you are finished troubleshooting.

  See also: http://windows.microsoft.com/en-US/windows-vista/What-are-the-different-wireless-network-security-methods

• Wireless adapter is no longer detected?

  Well, my girlfriend has dropped my really heavy DVD player on my USB wireless adapter, which was plugged in advance... adapter came out well, but the ports... not so much. So we had to move to the rear ports. We could always connect to the internet, no problem. Then the problems started. We would connect to a maximum of 10 minutes to an hour while that between the duty to repair our wireless connection. Then he stopped to pick up our networks. Now the wireless itself has disappeared.
  The card is not detected any longer, but it works fine connected to another PC. I tried reinstalling the drivers, nothing works. I tried EVERYTHING nothing helped. Someone, anyone please help me solve this problem!

  It is more of a hardware issue of a Windows problem.  The USB connector could have been damaged such that the power PIN is shorted on a spit of land somewhere.  Try to open the housing of your computer and follow the cables to the back of your damaged USB connector where it plugs into the motherboard and disconnect the connector from the motherboard.  With luck, that could take care of it.

  HTH,
  JW

• WIRELESS ADAPTER WILL NOT WORK UNLESS THE WIRED CONNECTION IS PRESENT

  PROBLEM: RECENTLY SPEND YOUR DESKTOP OF WIN - XP TO WIN 7 32 BIT AND MY HP LAP TOP VISTA 32, WINDOWS 7, 64 BIT.

  WIRELESS LAPTOP ADAPTER, NOT REARRANGE ITSELF TO USE A WIRELESS NETWORK

  CONNECTION. THE ROUTER AND WIRELESS ADAPTER HAVE THE CORRECT INFORMATION CONFIGURATION AND WORK WELL USING THE WIRED NETWORK. WHEN I MOVE THE NIC WIRELESS WI - FI FAILS.

  INFO WIRELESS ROUTER:

  LINKSYS BRAND: WRT300N V1.1
  BASIC WIRELESS SETTINGS: NETWORK RADIO BAND = AUTO, CHANNEL = MIXED MODE = AUTO, SSID = ACTIVE.
  WIRELESS SECURITY = WPA PERSONAL WITH TKIP ENCRYPTION

  WIRELESS ADAPTER, INTEL (R) WIRELESS WIFI LINK 4965AGN

  HP Pavilion DV 9700, WIN 7 64 bit update for Win Vista 32, NVidia Ge Force 8600 m GS graphic card, Win 7 64 bit.

  WHEN I CLICK ON THE ICON TO ACCESS INTERNET AND CLICK ON THE NETWORK TO CONNECT, THE WINDOWS NETWORK DIAGNOSTIC DIALOGUE BOX SHOWS CONNECTED, BUT FAILS TO COMPLETELY MAKE THE CONNECTION. WATCH THEN RESOLVE THE PROBLEMS, WHICH FAILS AND FINALLY TO INVESTIGATE THE PROBLEMS OF ROUTER OR ACCESS POINT...

  OTHER PEOPLE HAVE THIS PROBLEM, WHEN THEY SWITCH TO WIN 7. BUT THERE WAS NO MIRACLE DOCUMENTED THAT I CAN FIND ON THE WEB. IN THE OTHER FORUMS DISCUSS ISSUES RELATED TO THIS PROBLEM CONGREGATE, THEY PROVIDE NO BUGS. I NEED HELP TO SET UP MY WIRELESS NETWORK ADAPTER TO THE RECONFIGURATION OF THE WIRELESS NETWORK.

  Thank you all who responded and have tried to help me. Before posting, I tried most of the mentioned patches, including upgrading my firmware of the router. In addition, I went to Device Manager and scanned for changes and checked the properties under the Advanced tab of the Wifi link adapter. I tried the update driver and deactivation and activation of the device. None of this has worked.

  Finally, I uninstalled and then reinstalled the Wifi card. It worked. I guess the driver software became corrupt and data of the register of the device had probably need re - install, this is what worked. This seems to happen when upgrading Windows operating systems prior to WIN 7 and later people lose their wifi connection. Then this problem develops.

  It worked for me. I hope this works for others with the same problem.

  Once again I thank you all.

• Error problem USB wireless adapter "Wireless LAN adapt Wireless Network Connection 4:

  Hello

  I can't access the internet via a USB on my desktop PC wireless adapter. In fact, I received the following message:
  Wireless Network Connection 4 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Double Belkin N + Wireless USB adapt
  Physical address.... : E8-5B-5B-49-DD-CD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Please help me solve the problem.

  tanks

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you some questions, in order to better understand the issue.

  1. What is the exact model of the Belkin USB adapter?

  2. What is the brand and model of your computer?

  3. When was the last time it was working fine?

  4. Remember to proceed with software or hardware changes recently?

  This problem may occur if there is a conflict with a third-party software or due to an outdated driver, to diagnose this issue further and solve the problem, try the following methods.

  Method 1: Run the network troubleshooter

  I suggest you to run the network troubleshooter utility. It will automatically detect and solve the common problems that can cause problems with the network. To run this utility, you can follow the article below:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Network Wi - Fi problems and

  Follow the Microsoft article on wireless and wired network problems. Click on the link below:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information was useful. Do not respond with answers, because it will help us to find and provide you with a better resolution.

  Thank you

• Wireless adapter fails - then the computer crashes.

  I've had this problem for a few days now. Basically, the problem is that my computer freezes completely and it becomes unresponsive at random times. It happened while I watch videos, play games or surf the internet, even while I'm on the login screen.

  I have recently noticed that just before the accident, strange things happen that seem to be centered around the wireless adapter. I'm not going to load a Web page, so I'll check the icon wireless and see that I'm connected to the network, but not internet. And then, as I try to disable and re-enable the adapter, the computer will crash.

  I just downloaded the drivers from the adapter and install them, but that has not changed anything.

  Anyone know what could cause this weird problem?

  Thank you.

  PS:

  Just happened twice again. Failed loading of Web pages, and who warned me that something was up. I unplugged the adapter, the operation aboard as usual for a while, but the computer does not save the adapter has been unplugged and continued to try to load web pages for a few moments, before it crashes.

  The first time, he had a BSOD, but he flashed to the top for a while before the computer restarted itself.

  Adapter is TL-WN722N

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.
  
  There could be various reasons for gel as a third-party program, modules, the origin of the problem of the computer.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Note: 1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  (2) If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Windows 7 wireless adapter missing

  Hello

  I have a DELL Inspiron 14R with windows 7 installed top.

  Yesterday, Wifi worked very well, and today, it is not. Wireless adapter is not listed in the change of parameters of the card or even the Device Manager... However, the ethernet connection works fine.

  I tried to reload using the last configuration and nothing has changed.

  Any idea on what the problem might be, and a solution would be more than welcome :)

  Thank you.

  Hello Fredric,

  Welcome to the Microsoft Community Forum.

  1. This is the first time that you connect to a Wi - Fi connection?
  2. You get the error message? If Yes, what is the exact error message/code?
  3. You did it hardware or software change before the specific issue?

  I would suggest trying the following methods and check.

  Method 1: why I can't connect to the Internet? to:

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Method 2: Install the latest drivers for the network card

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  For problems with missing wireless adapter, update the drivers for the wireless adapter and check if you are able to access the Internet

  Method 3: Update a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-isn ' t-work correctly

  Please return with the result and also answers to the above questions, we will be happy to help you further.

  All the best!

• Belkin F6D4050 v2 USB Wireless Adapter turns off after 5 minutes using Windows 7 Home Premium 64 bit

  I recently bought a wireless adapter Belkin for use in my Media Center PC in the living room. The router I use is also a Belkin N + Router. The wireless adapter will connect to my WPA encrypted network, but it will stop working after about 5 minutes or more. The State of the connection is going to say "No network detected." The icon shows a strong signal with a yellow bang next to it. It takes a hard reboot to get it working again. Take out the USB port and put again does nothing. The icon remains the same, but he won't let me not make a right-click or left-click on the icon. When you try to stop, the computer turns off completely; It gets stuck on the "Shutting Down" screen.

  I disabled the option in the settings to get to power adapter down to save power. I thought that this would fix it, but still the adapter is not connected.  My Dell laptop gets a signal stronger than this card, and there is also no problem to stay connected to the router.

  Any help would be appreciated on figure out how to get the card working properly.

  Hi brutus09,

  Welcome to the Microsoft Answers site!

  That the connection is lost intermittently, the issue seems to be with the drivers.

  As for now I suggest to uninstall the drivers for the wireless adapter and download the updated drivers from the manufacturers website and see if it can solve your problem.

  Access the link below to download the driver for the Belkin Wireless card.

  http://en-us-support.Belkin.com/

  1. go to the control panel and, under "Programs", select "uninstall a program".

  2. Select, then uninstall "Belkin Wireless card driver" from the list.

  3. disconnect the adapter.

  4. using another PC or via an temporary Ethernet, download the latest driver from the link above.

  5. run the executable downloaded on the computer, connect the adapter when prompted target.

  6. connect to your wireless as usual. If you have an encryption key, you will need to enter again by reinstalling the driver should solve the problem

  Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Let us know if it works very well, or for any further assistance.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Windows often (regiularly) stop only started a few weeks ago wireless adapter

  New problem
  A few weeks ago my wireless adapter started to lose the connection with the router.
  Other computers with no not this problem.
  Y at - it a setting I need to check/change?
  Windows 7
  Belkin router
  Adapter Asus

  Hi John,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you are facing a problem with wireless network connectivity.

  It would be great if you can answer these questions to help you further.

  1. have you made changes on the computer before this problem?

  2 is the issue limited while accessing the websites or any particular program?

  I would suggest trying the following methods and check.

  Method 1:

  Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you to update the latest drivers for the network card.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. Click Start, type ncpa.cpl, and then press ENTER.

  b. right click on your wireless network connection, then click Properties.

  c. click the wireless networks tab.

  d. under preferred networks, click your wireless network, and then click Properties.

  e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Method 4:

  Refer to the steps in the following Microsoft article and check.
  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Wireless adapter malfunction on start up - error Code 10016

  Hi there, hope someone can help.
  I have a Toshiba Satellite L755 S5360. In the last week or two, at startup, my wireless adapter (Realtek, built in) will not automatically connect to the network.  I have to turn the STOP wireless and then press the F8 key, and then I am running.
  So, I updated the driver, reinstalled the driver, even tried a system restore to see if something I did caused the problem. But I still have the problem.
  Took a look in Event Viewer > system log and came across these 2 event logs:
  (Details)
  Log name: System

  Source: Microsoft-Windows-DistributedCOM

  Date: 09/09/2012-22:05:20

  Event ID: 10016

  Task category: no

  Level: error

  Keywords: Classic

  User: SYSTEM

  Computer: MEAGANTOSHIBA

  Description:

  The application-specific permission settings do not authorization for the application server COM with the CLSID

  {C97FCC79-E628-407D-AE68-A06AD6D8B4D1}

  and APPID

  {344ED43D-D086-4961-86A6-1106F4ACAD9B}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC)
  . This security permission can be modified using the Component Services administrative tool.
  The event XML:
   
     
      10016
      0
      2
      0
      0
      0 x 80000000000000
     
      52980
     
     
      System
      MEAGANTOSHIBA
     
   
   
      application-specific
      Local
      Launch
      {C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
      {344ED43D-D086-4961-86A6-1106F4ACAD9B}
      NT AUTHORITY
      SYSTEM
      S-1-5-18
      LocalHost (using LRPC)
   
  AND
  Log name: System

  Source: Microsoft-Windows - autoconfiguration WLAN Service

  Date: 09/09/2012-22:03:13

  Event ID: 4001

  Task category: no

  Level: WARNING

  Keywords:

  User: SYSTEM

  Computer: MEAGANTOSHIBA

  Description:

  Autoconfiguration WLAN Service has stopped successfully.

  The event XML:

   

     

      4001

      0

      3

      0

      2

      0 x 4000000000000000

     

      52885

     

     

      System

      MEAGANTOSHIBA

     

   

   

   
  I don't know if the two are linked, any help would be appreciated! Thank you very much.

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  Method 1:
  
  a. open manage wireless networks by clicking the Start button, then Control Panel. In the search box, type Wireless and then click on manage wireless networks.
  b. click Add and then click on manually create a network profile.
  c. type the network information.
  d. If you want Windows to automatically connect when the network is in range, select the start this connection automatically check box.
  e. Select the connect even if the network is not broadcasting check box, click Next, and then click Close.

  For your reference: Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information is useful.

• I can not connect my Smartphone to my connectiion of Wifi computers via my wireless adapter

  It worked fine until I put in a new wireless adapter. I am sure that in my attempt to reproduce the configuration/connection of my cell phone Wifi signal with the new wireless adapter

  I was not able to make it work? I'd appreciate any help. Thank you

  Hello

  1. is detected in Device Managerwireless adapter?

  2. what happens when you try to connect to your phone?

  3. do you get any error code or error message?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter, and check.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Turn on the Windows Firewall temporarily off the power and check.

  Enable or disable the Windows Firewall:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  WARNING: Disable Antivirus\Firewall temporarily, then check the issue. Sometimes they may be in conflict. Please make sure that you enable the antivirus software\firewall after the test to keep your computer protected.

  Method 3:

  Try the steps in the following Microsoft article and check if it works.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope the information is useful.