Issues with the display settings - all super tiny

Similar Questions

• Does anyone can help with the display settings on Satellite 4070?

  My brother gave me his old laptop, a Satellite 4070, I wrongly thought was of Wi - Fi enabled and it is connected to my library with poor results.
  The display settings are gone and continue to go haywire and display a message saying:
  There is a problem with your display settings, the adapter type is incorrect, or the current configuration does not work with your hardware.

  I tried to change the display settings but they go back - anyone got any ideas on that?
  I know there is a product recovery CD, but naturally enough I don't have that either.
  Thank you

  Hello

  I m not exactly on this fault, but it seems there must be something wrong with the graphics driver and display settings.
  That's why I recommend you first remove the old driver and after restarting again try to install the graphics driver from the Toshiba driver page.

  I think you are using the Win98. Am I wrong?
  Then visit Toshiba, download the Trident display driver and install it!

  Good luck and have a nice day ;)

• Problems with the display settings in Windows XP on my acer aspire netbook

  Lack of custody of my office and the bottom was always blue. When for example I opened the menu options for DIVX it's all close together and the window is way to big for the screen I can't see all of the screen. Also problems with the connection to my netbook to the TV. It should never be on the screen and I can't understand how difficulty. Any suggestions

  Hi CharlesHefty,

  1. do you get an error message or error code?

  Check the event viewer for the newspapers of the related events that could help us solve the problems:

  Procedure to view and manage event logs in Event Viewer in Windows XP

  I suggest you try the steps from the following links in the article and see if it helps:

  How to solve problems of hardware and software drivers Windows XP

  How to configure and use multiple monitors in Windows XP

  Overview of multiple monitors

  I hope this helps.

• Tecra M4: Known issues with the display of graphical interfaces user written in Java?

  Hello

  I am developing software in Java which will run on the M4 model and have acquired a M4 to test the application.

  In fact, my GUI looks good when the monitor is in a normal "standing" position. However, when I fold the monitor down and transform all a TabletPC, I see the M4 is an empty JPanel.

  The GUI is written using the swing and consists of JPanels nested with GridBagLayouts.

  I tried to update the OS and my graphics drivers with no luck. First of all I would like to ask if anyone else has experienced similar problems and if so have any suggestions on how to fix?

  My M4 runs the same hardware/software that it came with Toshiba and I use jdk 1.5.

  Kind regards
  Ivar Nilsen

  Hello

  Have you used the new graphics driver Toshiba?
  Please check the Toshiba driver pager:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  You will find a display driver for nVidia card. The latest version 6.14.10.7141 is the 14/06/05 maybe that helps.

• When Vista (Home premium) end its commissioning, my switches in black and white color scheme. I can't go back to the color. I looked at the display settings and they say all in colour, however, I am always shows black and white.

  Color screen is permenantly black and white. cannot change color and all the display settings are in color. Monitor is always on the color, its just something that vista went to. At the start of vista, it's after start of switches in black and white and color. I can't see where it get back to normal.

  Hi shamorau,

  Welcome to the Microsoft Answers site!

  (1) do you have because of recent changes, after which the problem occurred?

  The first thing I would say is to update or rather uninstall and reinstall display drivers and who might have to deal with the issue.

  Also I suggest you try to use another monitor to see if it is not a problem with the monitor.

  Let us know if the problem persists after the driver updates.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Export issues of sequences with the correct settings for DVD

  Hi - I'm relatively new at first, but working on a project that is very important for me - for the life of me I can't understand correctly export settings.

  I have compiled from home movies of my family in a few sequences for the 60 years of my dad. I worked on these weeks now get cleaned and put all together. In total, it's about 24 hours of footage. These videos have all turned initially on a very old camera video in the 80 and 90 - the kind you actually stuck a VHS tape in. My ultimate goal is to put these or on a DVD (although I guess that's too many images for one), or a drive flash or something of all compiled in one video.

  So far, I got error messages on not enough disk space - so I tried breaking the sequences and exported individually as smaller files. But now, when I export those, all videos come out tiny - the video focuses on a much larger screen, do more fit to size. I studied everything about elongation and corresponding parameters and I tried everything. Of course I do not something good, I don't know what.

  I tried all different export settings, the settings of the sequence, and I thought I was following with the sequence settings, but I guess I'm not. Although I worked on it for weeks, I am out of time. His birthday was yesterday, and I wanted to give her the finished disc tomorrow. This does not seem possible as I am about to give up!

  Someone please help! I would be grateful if someone could guide me through what my sequence settings should be and what my export settings should be and how to get the video output to the correct size for the screen.

  I appreciate your help,

  Danielle

  Time of export will vary widely, depending on at least these factors

  1 - your computer... Processor and the amount of RAM, and is this external drive, USB2 and USB3?

  2. what you change, and effects that you have applied your 718 x 480 video size... is odd, the usual when scanning a VHS tape is 720 x 480, so your video requires 'some much' extra processing

• my desktop icons have turned all of a sudden really big, but the display settings are still normal?

  my desktop icons have turned all of a sudden really big, but the display settings are still normal? is there something more, what can I do?

  Displaying the desktop, hold down the CTRL key and rotate the mouse wheel to adjust the size.

• HP 15-d059sr: the problem with the display of graphics in games

  Good afternoon!
  Watching such a problem.
  During work on the desktop (surfing on the Internet, work with documents, see the video online, film) is OK, but it is necessary to enter the game (Stalker, Diablo 3, etc.) begins to shake up the top of the screen, or play with the brakes. Even if the settings on display at the minimum system requirements.
  And in the case of Diablo 3 for a long time so it does not display during playback load of background music.
  Core i5 12 GB of RAM, all the drivers downloaded from the official website, including the video card.

  Hi @GuardianStation,
   
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop 15-d059sr HP computer and issues with the games. On gaming sites, it is suggested that it might be an update that is necessary with Java. Here, it is a link that you can check with.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  If you downgraded to the original version of Windows, this could be the cause. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  Please let me know how it goes.

  Thank you.

• U3014 + PS3. Problem with the display resolution?

  Hello!

  PS3 cannot expose to a resolution of the screen for Dell U3014. I use the HDMI-HDMI cable. In the attempt of a choice display resolution in the settings of the PS3 when it test the monitor may not issue image. This means that an installer of the screen may not be complete. Now the installation of the screen program gives 576 p. As you understand, it is impossible to play on it. Please help with a problem.

  Thank you.

  Niko7,

  The U3014 HDMI port can do 1920 x 1080 (1080 p).
  * With the monitor and the PS3 on and using a HDMI to HDMI (not a DVI to HDMI) cable right, turn off the PS3 via the power switch on the back and then turn back with this same switch
  * Press and hold the power button on the front of the PS3 until you hear 2 beeps. Once it turns on, the screen should display a message something like: "an HDMI cable has been detected, you want to set up?
  * Then go here to set the video output to your TV/monitor
  http://manuals.PlayStation.NET/document/en/PS3/current/settings/videooutput.html
  * When you go through Setup for HDMI setting, you will need to check what your monitor video output modes supported (480i/480 p/576i/576 p/720 p/1080i/1080 p)
  * After you go through the intial setting HDMI menu and displays your PS3 via HDMI cable, on the main menu of the PS3, go to settings and then scroll the display settings. In display settings, put the full range RGB (HDMI) to full and put Y Pb/Cb Pr/Cr super-white (HDMI) on we

• Problems with the display of the 3D graph

  Hello world

  I use a 3-d chart in one of my screws and I have problems with the display. See what it shows by yourself:

  

  So, as you can see, the chart does not correctly display the data. But one thing I know, is that the data are sent correctly, because when I copy the LabVIEW graphic and paste it into paint, what I see, this is the graph displayed correctly:

  

  Anyone know what may cause the problem? I also have a similar problem with a waterfall in 3D.

  You can always download the updates of ni.com so.

  I also went through a documentation on known LV 2011 issues. I was able to find something interesting onthis page:

  3D image controls can display transparently or LabVIEW crash on some graphics cards

  The 3D Picture Control is based on an OpenSceneGraph that uses OpenGL. It was noted several reports of the 3D image control crashing LabVIEW. In almost all cases, it was an Intel graphics integrated into question. This accident is due to a mismatch of the graphic material. Note: most 3-d charts use the 3D picture control

  Some possible workarounds are:

  • Update the video driver
  • Enable/disable hardware acceleration
  • Enable Aero in Windows 7
  • Disable Aero in Windows 7

  I might try these workaround solutions and see if any of them work for you.

• Dual monitor - display 2 drops on the display settings.

  I'll have to go regularly to the Customization screen, and then to view the display settings 2 not coming after the system goes to screen saver mode is.

  The parameters display and position display, (centered in screen 1), are remembered everything except the screen recover-it is just blank.

  All I have to do is click on the image of the screen 2, and he re - wake up.

  The Machine and view the details below:

  • Dell Inspiron 545 - Intel Core 2 Q8200-2.33 GHz 2.33 GHz
  • 4 GB of Ram
  • NVidia GeForce 9400GT with 1024Mo - DDR2 memory
  • Windows Vista Edition SP2 Home Premium - 32-bit
  • Display 1 =
    Reference Dell 2005FPW 1680 x 1050 (natively). 60 Hz/32-bit color - DVI - PC connect display
  • Display 2 =.
    LG 19 "monitor to 1350 x 768 (native): 60 Hz/32-bit color - VGA - PC connect display

  NVidia drivers are current.

  Any help would be appreciated.

  Hi John_P

  Sorry, but Windows key + P made no difference.
  I had to resort to the usual solution by going to "Customize" then "display settings" and clicking on the image of the screen 2.
  Happy new year and thanks for trying to help.
  John

• Download the file: continue to change the display settings

  Hi all

  These days, he continues to be for no reason.
  I put the display settings to my download folder. The list, by group type, sort by last modified.
  However, without one apparent for this folder, other than asking to display its content, the undisciplined directory view my files in a detailed list with the default sort.

  My path to the download folder have been changed from the original.
  As my Windows is not in English, the name of path is also different from the display name (don't think that will have an impact as the path name is different from the name in all versions of windows-English).

  The setting for the folder is 'General Elements' (in properties/customize).

  Does anyone have the same problem before? In my view, is not only in the download folder.
  Any idea to fix it? I tried using desktop.ini, because I used to do it a lot before, but nothing has changed in this file, when I tried to change the display using the browser configuration.
  As I don't remember the setting of desktop.ini, I looked in the documentation.
  Here: http://hwiegman.home.xs4all.nl/desktopini.html
  And here: http://msdn.microsoft.com/en-us/library/windows/desktop/cc144102%28v=vs.85%29.aspx
  I changed the setting to 3 Vid == Mod.
  As the problem appeared at random times, I do not know if my problem is solved :/

  I have of course a question of law in the desktop.ini file.
  If anyone has any idea... =)

  I had a similar problem.

  Certain way when you change the name of the folder.  He lost the file that held the parameters.

  I found that the easiest way is to rename the damaged library, I recommend

  "Temp of library".  Then create a new library with the name of the library, in your case downloads.

  or whatever you want to call it.

  Then in the pane left right click the new library.

  And then in the left pane right-click the library damaged, then copy the 'Library locations' by using the 'include a folder"in your new downloads folder.

  Close windows Explorer.  Reopen and verify that your settings are as you wish.

  You can delete the corrupted library.

• Tecra M5 - SD card reader works with the factory settings

  Hi all
  My SD card reader has been in place. It will read a few cards of 4 GB and won't read other (usually newer).
  All cards in this problem area are Transcend cards 4GB SD (HC or whatever the format more later is)
  The cards, the M5 will not read can be read both my PDA, but also an old Tecra 9000 (who will also tell the other 4 GB cards)

  The PC was recently engineers have a problem so I asked to look at this problem. They reported that it was a software problem, because if they load the recovery CD (that is, to bring the machine to factory State) the SD card reader reads cards problem OK; Back to my setup and the SD card reader can not read cards SD - error message is "the request cannot be performed because of an i/o device error."

  So I guess that I need new drivers. Very well except that it has no drivers for the drive SD card itself. Its a part of the motherboard. There is a 'secure module SD' on the download from Toshiba site and I downloaded and installed the SD Secure module (dated 2008)
  However, Device Manager still shows that the SD host controller driver is Microsoft version 01/10/2002 6.0.4069.5

  If anyone has ideas on how to fix

  TFA
  R

  Hello!

  > back to my setup and the SD card reader will not read SD cards
  Can you explain what you mean, please?

  I put t understand why you n t run factory if it s a software problem. I never had problems with the factory settings because then I can make you that all functions work properly on my laptop.

  Good bye

• Satellite P205-S6337 - blue screen and the black screen with the display driver

  Hello
  It is my first time here, so let me know if I did something wrong in the post or something of the sort.

  Info:
  Toshiba Satellite P205-S6337
  Windows OS: Win XP Pro SP3 x 86 (x 32)
  BIOS version: 1.40
  RAM: 2 GB
  CPU: Intel Core2 T5300-1.73 GHz, 1.73 GHz (Dual Core)

  At the beginning I was watching a video on my laptop with Media Player Classic, I made an update of windows, after I did the update and rebooted my computer I tried to re - open the video with Media Player Classic, then once I did it kept freezing, then gives me a BSOD (Blue Screen Of Death) saying :
  'igxprd3 '.
  Beginning physical memory dump
  memory dump complete physics. »

  So I kept getting that whenever I tried to watch a movie, so I thought it was due to the update of windows, because it is is not the first time that the updates on their part messed up everything. So I reformatted and once he was done after I install all the driver I want to restart my computer, once Windows is started almost entirely the screen begins to bog down then finally go completely black, the computer seems to work very well once he does, but just no screen, so I went in SafeMode (F8) and would be either disable or uninstall the video After that it would be fine, just that it does not use the video card and all current graphic stuff are bogged down and looks bad and I installed versions older and more recent video card and it always does.

  Since I'm more savy with desktop and never loved laptop a lot, but what I've tried and what not it just seems that the video card is out. I even tried it blow and ensuring that everything is in place, but I hope I'm wrong and he is not out, if so, is there a way to put a new or add another external any?

  The only thing I could think about maybe trying to update the BIOS, but I never had no problem BIOS with any thing with that I'm not kidding, and never a update BIOS since Ive never liked to play with her.

  Hello

  In General, change the graphics card is not possible because the graphics card is attached to the motherboard. In this case the entire motherboard must be replaced and an authorized service provider can ask for help.

  A point would be interesting: you can install Windows Toshiba Recovery disk? I ask this question because it would be interesting to know what is happening with the factory settings. And you can determine if this hardware or software problem.

• Satellite A200: nVidia 7300 Go does not save the display settings

  I'm using the latest drivers available, but I can not even save display settings in nvidia
  Control Panel. For example if I turn down the brightness and increase digital vibrance and apply
  These settings, the next time that I reboot or run and release a game settings ALWAYS comes back to the
  their default values.

  I can't use a monitor external because the default brightness settings
  are very painful! They are literally blinding! Color settings do not record of either.

  Support for the New Zealands tech told me that it is a feature of Vista. What's supposed to be a joke?

  I also get bad interference on the screen lines when using an external monitor. It's very bad.

  Hello

  Have you noticed that emits from the first day with the factory settings?