It has been finalised dvd engraved a bottom half of the screen Green

Similar Questions

• After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  And this is not recognitze by any device, computer or iPhone 6plus.

  If you or the original owner did not have the password no one here or at Apple can help you.

• data has been replaced before it can be read by the system

  Hello

  I use a flow sensor that creates a frequency output and which connected to my PCI-6035E. When I run it, it works for a few seconds and then gives an error. Error 200141 ' data has been replaced before it can be read by the system. " I also tested with a pulse rather than the flow sensor generator, and the error only when I changed the frequency. How can I solve this prolem?

  Thanks in advance!

  Thank you for your answers, Bob.

  I got it now works, the problem was that I was using continuous samples. I am now a single sample with a while loop and it works.

• I ran microsoft security scan, and it says a voris has been partially deleted. How can I remove the rest or what should I do next

  I ran a scan of microsoft security and it indicates that a virus has been partially deleted. How can I remove the rest or what step I need to take the next

  Hi Lucie,.
  Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• Error: "SQLDUMPER library failed initialization.your installation is either corrupt or has been tampered with please uninstall then re run the installer to correct this problem.

  Original title: "SQLDUMPER.

  When I start my laptop windows xp, an error message appears "SQLDUMPER library failed initialization.your installation is either corrupt or has been tampered with please uninstall then re run the installer to correct this problem.

  Hi mark25666,
   
  Here's a similar post on this issue. Check the suggestion given in the link and see if it helps you too the question of fixing.
  Should what site I go to install SQLDumper Library?
   
  If this is not enough, post your query in the SQL Server instances for better assistance.

• Windows Defender: "" this operation has been cancelled due to restrictions in effect on the computer, contact your system administrator ""

  original title: windows Defender

  I am a beginner and need help. I uninstalled net protect + because it wasn't, not with BT which were unnecessary, but thanks to a member of the forum. Net + had problems trying to reinstall Protect so therefor I installed internet security essentials and now windows Defender does not work! When I try to open the message reads "this operation has been cancelled due to restrictions in effect on the computer, contact your system administrator" can someone help me with this problem. The system is windows vista Home premium.

  Have you installed Microsoft Security Essentials (MSE)? If so, you need not and should not run Windows Defender.  MSE does all what does Windows Defender and much more. Boulder computer Maven
  Most Microsoft Valuable Professional

• I have Windows 8 on my pc... at a time that the volume control on the screen has been affected and an icon/indicator jumped on my screen.

  When this has been touched an icon/indicator popped up on my screen and therefore not allowing the touchpad keyboard see... I can't find how to make it go away... it will not also allow me to use my cursor to make my sideview control out to shut down the computer... How can I get rid of this?

  Hello Wanda.

  Thanks for writing back and providing the information required as well as the screenshot.

  According to the information provided and the screenshot, the volume icon that appears on the screen is the result after pressing the Volume button on the keyboard. First, open the charm of settings , click on "change settings of the PC", then accessibility > Other Settingsand change the length of time to display the notifications to in the drop-down list box. This will reduce the amount of time that remains the notification on the screen. If this does not resolve the issue, go further.

  To remove the icon of volume you can press the volume button on the keyboard again. This work of keyboard keys based on the drivers provided by the manufacturer, I beg of you download and install the latest version of the drivers for the keyboard to solve this problem.

  Click on the link below to download the drivers.

  Drivers Lenovo idea Centre B540

  Hope the helps of information provided. Let us know the results, so that we can help you further.

• The document has been changed since its creation and use of the extended functionality is no longer available

  I have Adobe Acrobat Reader DC 2015.016.20039 on my system. I filled a form using Foxit Reader. When I tried to open the form with Adobe Acrobat Reader DC I received the error "the document enabled extended in Adobe Acrobat Reader DC features. The document has been changed since its creation and use of the extended functionality is no longer available. Please contact the author for the original version of this document.

  I tried other PDF programs, no problem at the opening of this form.

  

  Function "Activation reader" comes from the original shape, and it's essentially a digital signature. It is specific for the free product of Viewer PDF by Adobe (aka Adobe (Acrobat) Reader).

  The problem is that only Adobe products are able to (re) make these documents without breaking the seal of the digital signature.

  So, what happened in your case is the Foxit Viewer broke the seal during the recording of back and what's. Using Acrobat, you can save a copy of the form, and then continue will fill. Otherwise, you will be better off to start over, but stay with viewers Adobe PDF all the time, working with the form, or with a different Viewer, once again all the time you work with the shape.

  BTW, player XI and most recent no. have more need of extended for more rights blocked by previous versions of Reader. This is not enough in this case; only, it would be useful for the sender of the form.

  Update (after rereading of the original message): if it's just for viewing or print the form, you can ignore this message. You can also try to save just, you have a version of player who no longer has the rights extended (at your risk).

  I hope this can help.

• I have a copy of CS5 that is bought and paid for, has been installed and works, until I started using the creative cloud. Now it is considered as a trial, and when I enter the correct serial number it says it is invalid.

  I have a copy of CS5 that is bought and paid for, has been installed and works, until I started using the creative cloud. Now it is considered as a trial, and when I enter the correct serial number it says it is invalid.

  Cloud of reading resumes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

• I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect.  I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC.  Any assistance

  I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect.  I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC.  Any help is greatly appreciated.  One of my original case numbers were: 0216572509

  You need installed Adobe Creative Cloud. Check the link for more information below.

  Edge inspect FAQ EAC

• I can't check my email because my email has been disabled because I'm a student at the University

  I can't check my email because my email has been disabled because I'm a student at the University.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I bought a year of adobe cc today. When the screen came to tell me that he has been to process my payment, do not press the 'back' button or refresh the page such that it could take a few minutes. 7 hours ago. The cat to help told me it would take 24 hour

  I bought a year of adobe cc today. The screen came to tell me that he has been to process my payment, do not press the 'back' button or refresh the page, because this could take a few minutes. 7 hours ago. I contacted the Department of chat help and told me it would take 24 hours to process. Is this normal? Why the screen me "a few minutes" looks like if she's actually 24 hours? Does anyone else have this problem? I'm so tempted to just refresh the page and try my luck with my credit card, canceling a second payment if it happens. THIS could be faster.

  Hi stephanie palmer,.

  We would like to inform you that your order has been placed successfully and you can the course using the subscription.

  Please follow the link mentioned to install products below.

  Using creative cloud | Download, install, update or uninstall applications

  Kindly share the results once made.

  Thank you

  Atul Saini

• Satellite L50-B-1F6 - default bottom right of the screen

  Hello

  I bought a Satellite L50-B-1F6 (Corei7, 4 GB of RAM, 1 TB, IPS FullHD screen).

  The first scratches on the screen near the time of the taskbar.

  So I sent the product to my retailer for an Exchange to a new.
  The new product has been delivered, open to the seller, and we have no scratches.

  So I return the product at home. The House, once I removed the plastic protective film that is around the screen.
  I then discovered another flaw in the bottom right of the screen, was not because of the plastic wrap.

  The surface of the screen and power off and causes unpleasant reflections.
  My dealer doesn't want, because we controlled the entire product.
  I post pictures of defects.

  Do you have also serious about finishing your Satellite, and then I get a refund or exchange of the Toshiba screen.

  [Photos: http://1drv.ms/11P8Hm5]

  According to me, there is no much to do the material is affected and replacement of equipment only made a real option to fix.

  If the dealer doesn t want to replace the product, contact the Toshiba authorized service provider for repair.

  But I m wondering about the dealer of laptop I put t know where you bought this laptop but in my country, each product is guaranteed by a guarantee, and in case of hardware problems, the dealer is forced to solve the problem.

• Firefox 4 seems to have forgotten the small progress bar at the bottom right of the screen that shows how close you were to get the web site that you just clicked to retrieve. What happened to him?

  In older versions of Firefox, there was a small rectangular window at the bottom right of the screen which got progressively filled with green squares, that your last order has been processed. This allowed you to know that the computer had received the order and close about how it would carry out the requested task. No such window does appear in Firefox 4. That has been omitted or what I have to do something to get it back?

  Click on View - Toolbars - then the module Bar, and your progress bar will be there.

• "Windows is not genuine" found at the bottom right of the screen. Already active Windows.

  I bought a laptop and installed windows pro. Windows has been activated successfully. After two weeks, I've had my laptop replaced with a new laptop, the same model (with the same characteristics) due to a defective part of the keyboard. They removed the hard drive of my laptop and inserted in the new laptop. After that, windows is reactivated in the new laptop and the activation was successful. Installed windows updates regularly.

  Two weeks later, after playing a game online, I saw a message from 3 lines at the bottom right of the screen with the last line, saying "Windows is not genuine". I forgot the first two lines, because when I open my computer system properties, I checked that the glass is always enabled, and at this time when the System Properties window has been opened, the message of 3 lines down to the right of the screen suddenly disappeared.

  After that, I checked the windows update and installed the updates available and it is ok. Since yesterday I have not seen the message more. It came to my mind that, at the time the message appeared, is 30 days from when I activated all first windows.
  I just want to clarify if it was just a bug, or wrongly identified my OS as genuine microsoft?
  If it was just a bug, this message will appear soon? Hope someone can clarify it.
  Thank you.

  Well, your report does not indicate that everything is bad:

  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 20/01/2012-12:50:35 AM

  But your date will not, today, it's the 19th, not 20.