It is a Doozy. No sound, no CD. It happened after the update. Tried as far as I know.

Similar Questions

• Lost all sound from my computer after the updates

  Driver Audio original was ahead AC 97 Audio for VIA (R) audio controller.  During updates, this changed to C-Media AC 97 Audio Device. Now I have no sound.  When I check in the properties for C-Media I get the message "this device cannot start [Code 10] any ideas how to get back my sound."  Thank you

  If you still get the wrong driver of WU on your sound card, hide the update.

  You go to the website of the manufacturer (sound card) and get drivers.

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• No sound on my HP laptop after windows update in Windows Vista Service pack 2.

  I updated windows vista pack 1 in windows vista pack 2, there was a problem on a sound system, speaker and microphone is unplugged and turned into interface SPDIF, but its sounds not, Help how to fix the sound.

  Hello

  I suggest that you uninstall and reinstall the sound card drivers and check if the problem persists.

   
  a. Click Start, type Device Manager and press ENTER.
  (b) in the Device Manager, select sound, video and game controllers and the same.
  c. highlight the driver, right click and choose uninstall.
  d. restart the computer, if prompted.
   
  After the computer restarts, reinstall the sound drivers and check if this solves the problem.
   
  Note: Make sure that you download and save the latest audio drivers on your hard disk before you uninstall the same device manager.

  See also to sound from your computer: recommended links

• Sound stops and slows down after the installation of Microsoft Vista SP2

  Its malfunction after installing Microsoft Visa SP2

  I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

  I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

  Here's a thread on these forums on how to fix this: http://social.answers.microsoft.com/Forums/en-US/vistamedia/thread/f16247af-313a-418d-915e-6403012c25eb

• I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after the use of realplayer download

  I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after using the lplayer rea download

  Hello

  We will try to download different video using different downloader (other than RealPlayer) and see if the problem still persists.

• No sound in Windows Media Player after the resumption of pause or mute

  Windows media player 11

  listen, listen to music, then press pause or mute, then press on play once again, but no sound.  must double click on the song to replay as soon as

  Hi nymedic,

  (1) is limited only to a few specific files?

  (2) what Version\Edition of Windows you are running on the computer?

  Windows 7 comes with Windows Media player 12; If you are running Windows 7, please try the following steps:

  Step 1: Run the troubleshooter of Audio playback and check if that makes a difference

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Step 2: Run the troubleshooter in Windows Media Player settings and check

  Open Windows Media Player Settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  I would like to know if the problem is resolved or you need help

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound after the update and its orange on my mediasmart region

  I've updated my drivers and have no sound and the sound button above the main panel is on an orange permanent and won't do anything.  I used Microsoft fixit. Nothing and and updated my Bios to 17/08/09.  Nothing made a difference.  Sound was working until I updated audio driver IDT uncertain of how to fix.

  Any help would be greatly appreciated.

  Other people have left P/N.

  P/N is NB231UA #ABA

  It is a Pavilion dv7 1245dx.

  Thank you.

  Can you check in Device Manager, if there is that no error related to her under sound, video and game controllers... Also, can you tell me if the update was pushed from HP or Microsoft...

  Here is the link to audio player... ftp://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45073.exe

  Who I would like to install and check...

• Sound/audio does not work after automatic update of Windows 8 for the July 12, 2014

  Solving audio problems do not detect a problem.

  When I go to the control panel > hardware & sound > playback, right-click on the device, I get this message:

  "This device is used by another application. Please close all devices... "

  However, I restarted the laptop with no other applications running and I still get the above message.

  It must be linked to the recent update of W8 for 2 days ago that my audio has always worked fine until here. Without having to reinstall all the software, what I can do, as I have not changed anything other than subscribe to automatic update of Windows? (It makes me want to stop the update btw, if the updates affect the normal performance of my laptop).

  A new update for Windows 8 rises to fix this audio problem?

  Welcome to any other measure to solve the problem? -Many thanks.

  It worked for me, you can't find it on your hard drive, you must go to > Control Panel > programs > programs and features-> installed updates. under the microsoft windows list, locate those added on July 12, 2014. RightClick > uninstall the "update for Microsoft Windows (KB2962407)" (let others, simply uninstall it) it invite you to reboot, and you should have sound after reboot. "

  hope this helps, I did not half an hour.

• No sound output to Avi return after the last update CC

  Hi there everyone,

  Am that I the only female victim out silent on each rendered AVI I do since the update to the latest version of AE CC? QuickTime works fine, so I returned to QT in my workflow again (a few CC versions earlier it was QT makes that came out with "drop-outs" and all other types of problems, so at this point I went to AVI) to work around this problem, but it is an obvious bug since the last update. I simply add a comp to the render queue, no matter if I choose Audio 'Auto' or 'On', all AVI's going out with no noise at all. Copies the render queue item, leaving each parameter, as is, but QT to select as output will make it very well with the sound. That's happened? Why even the simplest, most basic things that have worked very well since AE version 0.0 suddenly break when an update is launched? Updating becomes more risky as never before, it seems. Adobe please listen to this...

  See the last item on this page:

  known issues in after effects CC 2015 (13.5)

• XAV-701HD questions, even after the update - changing Staion, no sound after the cycle of keys.

  I have a Sony XAV-701HD installed in my 09 Ram. I have had for a while now and still have problems even after the last update of the firmware. Since I installed the radio, the stations would change when I turn off the key and then restart the truck. Ususally a station off where I was listening. Then I noticed that when you listen to a CD, if I stop the truck, stop, and restart, I have sometimes no sound from the CD unit that change source to something else then back to CD. In addition, it seems to take an eternity for the CD start playing when I insert one, or when I start the truck every morning. Sometimes the CD start just up, other times not. Now, I've added SiurisXM to the unit, and I noticed that when I turn the key off the coast, and then back on, the device will not be playing Sirius Music until I have changing source, let the next launch of source for play, then switch back to sirius. I'm a professional installer, I know all my wiring is good, everything works. My Kenwood has worked perfectly in the same truck for 2 years before I changed to the Sony. Any ideas?

  
  

• Qosmio F30-111: no sound after the update of the 3.40 BIOS & Vista installation

  Hello!

  I have a Qosmio F30-111, originally with Windows MCE and all devices works fine, but I made an update of firmware BIOS to 3.40 (before was a version 1.x).

  Later, I installed Windows Vista Ultimate and all devices has been recognized very well (with Toshiba Vista drivers), but the sound was not working!
  The situation was:
  -The sound device has been recognized;
  -The MIC works (but I can't hear it);
  -The speakers do not work!<- the="" real="">

  Now I installed the recovery CD and I'm new to Windows MCE, but noise have the same problem... is recognized, but the speakers do not work.
  I have no idea what to do... I don't know if it is possible to restore the firmware (I think that was the problem).

  Don't forget: the audio device works, the works of Media Player, but I can't hear the sound (Yes, the volume is high and is not dumb)

  Sorry for my bad English,
  Thank you very much!

  Murilo

  Hello Md2

  You can hear the noise if you plug headphones into the audio?

  If there is his helmet and then the audio device works well.

  If not, then disconnect all devices external usb and start a clean installation of vista (not upgrade, but booting from the vista cd)

  don't forget to put the RAID driver on cd or diskette or usb flash key before doing the clean install of vista.

• Sound and music iss after the update of the marshmallow...

  After update of Marshmallow, I am facing problem of hiugh in the music...
  Improvement of the music does not work I am listening to the video in YouTube but improvement of the sound does not work in YouTube or applications online music... At the moment I feel very sad... Please Sony Xperia Inc. fix this problem...

  Same here, even the soft music after MM, the sound is low and the volume of mid-range to the maximum the line is no difference. Xloud is insesizable, so low hope that Sony will fix this problem

• Laptop HP - 15-r213ns: hotkeys (keys of wifi sound, brightness), does not work after windows update

  Hello

  I have a HP laptop - 15-r213ns (ENERGY STAR) with windows 8.1

  Last night, after an update of windows, the shortcut of the brightness (F2 and F3) volume (F7 and F8), wifi (F12) and keys all others have stopped working.  I can always change the brightness and volume using windows, but I can't do more using the keys.

  The function keys are working, as refresh F5 or F3 Browse. I noticed that before I had to press the FN key for this and now she does without the FN + Fx, so I guess that the update of windows must have changed something here.

  They used to work fine before the update. I reinstalled the display drivers (NVIDIA G-FORCE 820 - M) and looked for new drivers or update drivers using HP Support Assistant, but everything is up-to-date.

  I was looking for hot key factors in the page of HP drivers for my product but could not find any keyboard, drivers or software related shortcut keys.

  any suggestions?

  Thanks in advance,

  Marco

  Hi, Marco:

  The system of the event utility is supposed to get the Fn keys to work.

  Details:

  This package contains the HP System Event utility for the laptop models running a supported operating system. HP System Event Utility allows the special programming function keys.

  File name: sp70439.exe

  You can find this file in the Software - Solutions section of the driver for your model page.

• After the update to os2.2 my notifications sounds have stopped working

  After the update my os 2.2 shows that my notifications have stopped working, I tried to reinstall the software and I restarted my iPhone and watch several times.

  ..

• After the last update, why now FF makes a sound when you open web pages?

  When I insert a web page on FF a sound. This started happening after update to 32.0.3. I want very much to this silence. TIA

  1. Do you use the NoScript extension? , It provides a hum of "mosquito" when a script is blocked. NoScritpt Options > Notifications-> Audio feedback when scripts are blocked
  2. Check the 'sounds' in the control panel. A recent Windows Update can have lit it.