It is not possible to restore the system, the dates are missing

Similar Questions

• XP sp 3 order restore system restore. Reports, not able to restore the (date) _

  recently installed program of care 3 Advanced System. clean registry, short cutting etc. with apparent problem. correlation? suggestions? I already "canceled" pre cleaned State .even no joy will not restore?  reload XP OS and start @ square one?

  System Restore didn't work before installation produce of the care system?

  Did you install a free or paid version of ASC?

  I suppose it does not really matter, but what problem have you requiring you to use the system restore or if you are just practical (it should still work).

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  Depending on what you use for malware protection, you will maybe disable the product temporarily, make the system restore and then turn on the product.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Home page search is not working / not Possible to restore the previous Session

  After the last update (version 29), the home page of default Firefox search bar has been completely non-functional. If I hit enter or press search, nothing happens. Another (possibly related) problem is that the button 'Restore previous Session' is never present. I can also restore the previous session by clicking on the option of history (it is always grayed out).

  When you look to the top How to start safe mode, I discovered how to reset Firefox to its default value of the plant. I did it and Voila! Problem solved.

• can application not available I restore the data from an encrypted backup?

  I had to get my iPhone repaired, so I did a full backup to iTunes and reset Once it was fixed, I have restored the backup, but a few apps "could not be restored. In the case of the one that interests me, the app no longer seems to exist on the App Store - I found a link for it from a review of old, but the link is dead: the app no longer exists. Since it is an application that stores data on the heights of our children, and I had used it for a few years, I would like to be able to recover at least the RAW files of my support, even if the app no longer exists. It is not a large amount of data. The backup is encrypted, so none of the files have names that are meaningful, it is impossible to guess what file is associated with that particular application. Any suggestions?

  If you have the app in the iTunes library on your computer you can restore it from there.

• Create log of three screws - sometimes the data are missing

  Hello

  I have three screws measure in parallel in a loop

  Three results are saved permanently to the global network and also in a text file.

  The berries-global has always all the data, but in the text file is missing some data.

  I think it is because the file is locked to a vi, while the other vi wants to write its data.

  What can I do here?

  Something like writing data in a queue and an another vi reads the queue and writes the file?

  Or y at - it something like a "checking if the file is in use" - property? Then I could wrap up the only unused before running writing?

  Thank you

  Yes, writing data to a queue is the perfect solution. Quick access to the sender, writes the author in his own pace and no missing data.

  /Y

• Hi, is it possible to restore the synchronization data after accidentally putting sync key? I still have an old key synchronization. Thank you

  Hi, is it possible to restore the data synchronized after accidentally putting synchronization key a day ago? I still have an old key synchronization. Thank you

  Sorry, when the sync key is reset data synchronization on the server are deleted.

  Your data must remain on other devices that use Sync before you reset your sync key, that data is not disabled when the sync key is reset.

  Now, if you had only a device running on this account synchronization and you reformatted this device, you have made a fatal mistake by resetting the sync key; There is no way to recover this type or user error. Sync was not designed as a media set in itself, there is no backup of data synchronization server or a way to restore a mistake as the synchronization key reset.

• Is it possible to restore the documents if the system restore has not been activated previously?

  is it possible to restore the documents because I turned off then turned on the system restore and lost all my documents. help please an old lady of 61, who needs these documents for school

  E-mail address is removed from the privacy *.

  * original title - documents can be restored from HDD after system restore has been turned off the on *.

  Hi jacqulinekleiss,

  If the system restore is off turn on the computer of all available restore points will be deleted and you will no be able to return to the previous state.

  System Restore "restore points" are missing or deleted

  http://support.Microsoft.com/kb/301224

• Satellite U400-124: is it possible to restore the operating system without the DVD

  I have a U400-124 I want to do a system restore.
  I created the Toshiba Recovery DVD but I don't have it with me (I'm in Italy and it is in the United Kingdom).

  I have three left:

  1 Vista (c :))
  2 WinRE (d :))
  3 data (e :))

  Is it possible to restore the operating system without the DVD?

  Also, what exactly are leaving them? I'm not wrong!
  1 Vista (c) - for the operating system
  2 WinRE (d) - is a hidden partition and it is necessary for the backup files in Vista
  3. data (E :) - contains the record of recovery

  Sorry for my lack of knowledge! Thanks for all your help in advance!

  > Is it possible to restore the operating system without the DVD?
  This is possible only if the second partition and HARD disk recovery file has not changed

  Start the Toshiba HDD recovery procedure by pressing the F8 key.
  A start menu should appear, then you should choose the first option called fix my computer.
  Then it should open a new window with an option called Toshiba recovery.
  Choose that and usually drive HARD recovery must begin.

  Good bye

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DV6-6c65el: it is not possible to restore to factory condition

  Ciao
  My pc has this problem: "it is not possible to restore to factory condition.
  Noteboock HP Pavilion dv6-6c65el
  OS: Windows 7 Home Premium 64 - bit SP1
  CPU Intel Core i5 - 2450 M CPU @ 2.50\3.10GHz hd3000 integrata
  Radeon HD 7690M XT 2Gb GDDR5 graphics
  BIOS brand Hewlett-Packard
  Version F.12 Date 10/26/2011
  Hard drive (C) OS + (D) Recovery + (E) HpTools.

  After "reset to factory condition" (with HP Recovery Manager), I noticed the anomaly IE9 32-bit.
  In addition, the absence of other software pre-installed (missing: Hp Hp setup-documentation-IE9 64-bit).
  When I tried a new reset, HP Recovery Manager for the recovery of the system voice (factory State) told me:
  (disabled: to restore the system, use recovery media)
  Using Recovery DVD (in excellent condition), you receive the following error message:
  "windows has encountered a problem communicating with a device connected to your computer, this errorcan be cause by one umpluggin
  device for removable storage such as an exsternal usb drive while the appliance is in use, or faulty hardware such as hard drive or cd-rom drive
  "' which is a failure all removable storage is well secured, and then restart your pc" status: 0xc00000c9 Info: an error I\O untimely that occurred. "
  The same thing happens with the F11 key at startup. Reset the error.
  System restore of Microsoft is not resolved.
  In Windows, everything else seems to work and the hardware of the laptop has no problem.
  The original dvd drive has been replaced by a compatible; reads all discs supported.
  Install only MSE (I only use portable software).
  There is no virus or another malaware.
  I performed the formalities in support of hp but nothing has changed.
  You can find a solution?
  Ciao e grazie
  Lecce2

  I have no ' answer because my computer had crashed full.
  I apologize.
  Order media why?
  If the disks created the first time the PC will not work. I guess this does not solve the problem discs hp (I also read on a problem like mine. "This problem was solved with the media purchased by HP).
  I turned the web weeks and I finally found the proper procedure.
  I made several attempts to solve the problem. But now I did.
  1-show Hidden Files-protected
  2 - Enter with a program (are: Commander file) in the recovery partition and copy the file or files base.wim. My is about 18 GB, 1 file.
  3. we need a second PC and dvd
  4. follow a procedure described by internauta 37.
  Search for "Ripristinare portable HP DVD e senza is the HP Recovery Manager is not Internauta37.
  E ' has been for me a bit complicated, but in the end, I have my hp to factory State and everything works perfectly.

  Thanks to you all

• Not possible to do the updates

  I tried to do the update for the Nokia Music Player, but it has been discontinued. Once this system get stuck while it cannot install most anything. It happens only the error message which says that "it is not possible to update because the other installation is running. Problem, is that it is not possible to remove Nokia Player (using the control panel) because it gives the error message "it is not possible to remove the program because it is used by the other program. What should do?

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• ve to the hd format 2-3 tim, then now, my key is not registered. I'm a very poor people, it is not possible to buy the os again.pls.help me...

  I bought the original windows 7 os profeessional of outlets of my locality.but because of some problems technical I format the hd 2 - 3 times, so now my key is not registered. I'm a very poor people, it is not possible to buy the os again.pls.help me...

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  After you have reactivated, make an image of the system, in the future, when you want to reinstall Windows 7, restore you the image.

• I use Adobe Photoshop on a daily basis, from today, that the program has disappeared from my computer. Is it possible to restore the program or to understand what happened?

  I use Adobe Photoshop on a daily basis, from today, that the program has disappeared from my computer. Is it possible to restore the program or to understand what has happened through Windows XP Pro?

  Has it really been uninstalled... or if only the shortcut has disappeared?

  Click Start > search, select "All files and folders", then search for photoshop.exe

  I do not have Photoshop installed, but if it's like other Adobe applications, he located in C:\Program Adobe Photoshop.

• Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection.

  "Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output screen protection. Try to install a driver available for your video card. Is the error that keeps popping up. Even after the update driver... now what do I do?

  Hello

  1 did you change on your computer?

  2. not this problem occurs with the particular DVD or with other DVDs?

  3. is the specific issue limited to the DVD?

  4. are you able to play the DVD in the other system?

  Method 1:

  I suggest you follow the link and check.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Method 2:

  I suggest you follow the link and check.

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection

  http://support.Microsoft.com/kb/2004673

  See also:

  Cannot read DVD

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• Log in failure: the user profile Service failed to connect. It is not possible to read the profile of the user.

  Hello
  Trying to create a standard account on a new Windows 7 computer but can not connect. The message with my Swedish translation is: user profile Service failed to connect. It is not possible to read the profile of the user.
  Can someone advice me?

  Hi Lagun,
   
  Step 1:
   
  I suggest you to follow this link below and check if this solves the problem.
   
  Now search for the question.
   
  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  See also:
   
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215
   
  Important: the above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
   
  Step 2:
   
  If you need assistance in Swedish, below the URL provided will help you receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.
   
  http://support.microsoft.com/common/international.aspx.
  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.