It is not recognized on Toshiba Satellite L505-10V support site

Similar Questions

• It is not recognized on Toshiba Satellite M70-169 Web site

  Hello
  I have a laptop TOSHIBA SATELLITE M70-169
  I wanted to update my drivers, so I logged on the TOSHIBA site.
  The problem is that my phone is not listed on the site, there are * M70-168 * and * M70-170 * but not * M70 - 169 *.
  I tried the recognition by serial number, result: DO NOT RECOGNISED

  I tested the autodetection, and here too, the result was: DO NOT RECOGNISED.
  I am surprised that my laptop is not recognized on the official website of TOSHIBA, while I had bought in a store.

  Can someone tell me if he had the same problem and give me directions to upgrade my laptop?

  Thank you

  Satellite M70 is old enough laptop model, and I can imagine that auto detection tool doesn't properly work. Your laptop is the model European and part PSM70E number (very important for research).
  In any case, you can find all the drivers or updates manually. Follow these steps:

  Visit the download page for Toshiba under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
  Click tracking options:
  Type of product - ARCHIVE
  Family - SATELLITE
  Series of products - M SERIES SATELLITES
  Model - SATELLITE M70 (PSM70)
  Short model No. - PSM70E
  OS - operating system

  And all of the available stuff appears there.

  If you have any other questions let us know.

• Re: Serial number of satellites not recognized by Toshiba support

  Hello

  I have a computer laptop satellite A200, and I'm not able to find a driver for it on the Toshiba site!
  -serial number (X8172841K) is not recognized, the message is: "Sorry, your product is not found" [translated from the French]
  -the support site can not detect my laptop model
  -None of the drivers that I downloaded (the closest A200) accept to install

  Can U help me?

  Kind regards
  Sébastien (France)

  If the serial number is not detected by automatic detection you can find the drivers manually.

  Maybe you have the same A200 and my friends. His cell phone has PSAE6E part number.
  To find the correct drivers visit download Toshiba and support under http://eu.computers.toshiba-europe.com page > support & downloads > support homepage and at the bottom you will find link to download drivers.

  Go there and choose your model of laptop with brief model number.

  If you need more help please let me know.

  BTW: have you tried to find the right drivers on Toshiba France support page?

• Toshiba Satellite L505-s5990 can be improved with more RAM?

  I have this Toshiba satellite L505-s5990 with windows 7 32-bit and intel core 2duo t6500 and I think that I cheated, well I don think, I was mistaken, because when I buy first told me it has ddr3 ram and there no, also told me that I could add more RAM, because it might be expandable up to 8 GB of ram, because there just 3 when I bought and which I have now doubt, well, you might wonder why I do not do something like back or something like that, well the reason is that, at the point where I noticed that it was already too late (warranty and return policy) had expired already, I didn't know anything this either on the computers, of course, so now I'm stuck with it and I guess all I can do is upgraded to what I want if possible lol! Well what I want is run several operating systems to achieve I think that my laptop I could run virtualization and I would like to know what equipment I need to upgrade my computer to do and if it supports the upgrade? I would appreciate very if anyone of you could help me with this.

  I have this Toshiba satellite L505-s5990 with windows 7 32-bit and intel core 2duo t6500 and I think that I cheated, well I don think, I was mistaken, because when I buy first told me it has ddr3 ram and there no, also told me that I could add more RAM, because it might be expandable up to 8 GB of ram, because there just 3 when I bought and which I have now doubt, well, you might wonder why I do not do something like back or something like that, well the reason is that, at the point where I noticed that it was already too late (warranty and return policy) had expired already, I didn't know anything this either on the computers, of course, so now I'm stuck with it and I guess all I can do is upgraded to what I want if possible lol! Well what I want is run several operating systems to achieve I think that my laptop I could run virtualization and I would like to know what equipment I need to upgrade my computer to do and if it supports the upgrade? I would appreciate very if anyone of you could help me with this.

  Wow.  All this without breathing a lot and you do not use Google? * smile * you should really get in GOOGLE.
   
  You have this laptop:
  http://www.toshibadirect.com/TD/B2C/retail-product.jsp?poid=452314
   
  You can easily get up to 8 GB of memory MATERIAL:
  http://www.crucial.com/upgrade/Toshiba-memory/satellite+L505+series/satellite+L505-S5990-upgrades.html

  Beyond that - well - what EDITION of Windows 7 do you have?  You have given version (Windows 7) and architecture (32-bit) but not editing (home edition Premium, etc.)
   
  In the end - it won't matter much if Windows 7 32-bit came pre-installed.  Despite the ability of the machine to have 8 GB memory installed and the material see - the 32-bit version of Windows 7 you have is not going to use it somehow.  Somewhere between 3 and 4 GB is the most he'll see/use/give you access to.  It is the nature of the beast.
   
  Also - if it came pre-installed you can just use your product key, download Windows 7 64 bits _ and install - because the OEM for Windows 7 licenses does not work like that.  You bought Windows 7 32-bit OEM and that's all you get.  Sales in the RETAIL of WIndows 7 license would have given you the ability to change as often as you wish between 32-bit and 64-bit.
   
  Where did put you?  Well in my digging around, I'm fairly certain that you pretty much exactly what I linked to the first.  Windows 7 Home Premium, 32-bit, 3 GB memory, processor 2.1 GHz dual core...  You can probably do a little now - virtualization might need to turn on a few things in the BIOS to really enjoy it - but it would work probably right now.  Take the free VirtualBox there and install the OS you want ot - but you probably will have to be rare on how much memory you give virtual machine (1, maybe 1.5 GB at max.)

  If you are looking to improve more...  You will probably need to invest in:

  -Windows 7 Professional or edition full 64-bit
  -the 8 GB memory referenced above
  -a larger and faster disk hard

  After that - well, it's a laptop.  Reality of what you can do starting to settle in.  The above improvements would cost you somewhere (from) about 350 USD.  Your Dual Core processor will probably hinder things - how - investment as a whole better system would be wiser.

• The laptop recovery Toshiba Satellite L505-S5997 problem error: Windows cannot verify the digital signature for the drivers required for this device

  I have a Toshiba Satellite L505-S5997 computer laptop and my hardrive recently crushed, impossible to restart.  I installed a SEAGATE 500 GB/sata/GO 16 MB of Cache, 7200 RPM hard drive. I ordered recovery for the computer disks and many of the drivers will not update or install without error that tells me that "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) "error.  Also, when I try to update Windows 7 I get the ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "When I try to download the service pack from the Web site it is usually interrupted with another error.  I tried to go to the Toshiba website and download the drivers needed and utitilities but nothing seems to work.  I am at a loss to try to seek and find a solution.

  Are you sure that the original problem was caused by a failure of the HD, did you test that the hd with the utility bootable disk from audit?

  As if you reinstalled to a new HD using that the required all defined recovery Tosh disk drivers would have been installed in this process.

  Assuming that Tosh then rebooted successfully after recovery, windows update would have run some important updates automatically. If that failed then it would seem that something is happening with your system.

• New DVD drive not recognized on my Satellite Pro 4600

  Hi all

  I recently bought an engraver of DVD in NEC ND-6650 nine.
  This drive is NOT recognized by my Satellite Pro 4600 at all - neither Windows 2000 nor in the BIOS (v 2.60). BIOS updates higher than the 2.60 version are not provided.
  Does that mean I can forget about using the new writer in my old notebook?

  Thank you and best regards,

  Nils

  Hi Nils,

  I suspect that your new drive may be not be compatible with your laptop. Like all scanners to your new drive will be configured as slave or master (or CSEL possible), and this configuration should match your laptop.

  Usually your hard drive is configured as master on IDE channel 0 with optical drive is the slave on the same channel device. However, you may find that your optical drive is configured as master on the IDE 1 channel.

  Normally the setting is preconfigured by the manufacturer so you will need to check both the conficuration of your new drive and the configuration of your original drive to make sure they are the same.

  Kind regards

• How do I get into Bios on Toshiba Satellite L505-13F

  How to enter the Bios on Toshiba Satellite L505-13th?

  Have you tried pressing F2?

• HARD drive is not recognized on the Satellite 2800 200

  Hello

  First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

  I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
  When it is started is says "insert the disk in the drive system. Press a key when readya?.

  My bios is ACPI BIOS version 1.80
  In Pheripheral in Bios it says disc hard = not used Mode.

  On page two discs i/o: HARD drive: no drive.

  I tried two hard drives and the two were not working and not recognized in the BIOS.
  I have no CD of restoration.

  My questions:

  What kind of central computer has this laptop?
  Can someone help me with the recovery CD?
  What can I do to fix this?
  How can I change my BIOS so that the HARD drive is recognized?

  My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
  But also with the disk hard 10 GB of origin, I had the same problem.

  I hope you can help me and once again I apologize for my English.

  Hello

  I'll try to help you my friend.

  > When it is started is says "insert the disk in the drive system. Press any key when ready
  This message appeared on my laptop after the HARD disk is dead.
  I had to replace the HARD drive and reinstall the operating system.

  I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

  I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

  Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
  > How can I change my BIOS so that the HARD drive is recognized?
  The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
  But vary important is that you use a compatible HARD drive.

  > Can someone help me with the recovery CD?
  Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
  What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

  Greetings

• SD not recognized on the Satellite A100-787

  Although the card slot recognizes the memory stick from Sony, the SD card is not recognized at all. I tried the card on the other computer and it worked fine. The driver for the card slot works well.

  Any ideas?

  Sorry, but it is not easy to tell what can be the problem. What is the capacity of this SD card? You have produced high quality or some unknown manufacturer SD card?

  If possible, try to get the second SD card and test how it works with your laptop Satellite A100.

• Battery is not recognized on my Satellite C50D-A - 13 G

  Updated to win 10. Battery not recognized, seeing not on battery, operating only with power supply.
  Tried to put up-to-date, but lost the Toshiba PC Monitor health.
  Help!

  This means that battery is recognized properly if you are using the original operating system that you got with your laptop?

• Drve DVD is not recognized in Windows - Satellite P25

  Hello
  IM the owner of the satellite p25 last night somehow got my pirate pc sience then im trying to reinstall my operating system
  but the main problem is that my bios recognize not my dvdr (uj - 830 b) in windows I can see, but I'm not going to see in bios, any ideas how can I boot from a dvd to reinstall my windows?

  Hello

  Why are you suggesting that the drive is not recognized in the BIOS?
  Have you tried different options to boot from the CD?

  Usually if you press the C key immediately after starting the laptop, you should be able to boot from the disc. In addition, you must change the boot order in the BIOS.

  Have you tried to boot from various records as the original CD of Windows?
  Maybe your first CD is corrupt and that's why the drive cannot start.

• H satellite L505-13 supports 3 G? SIM card under the battery available

  Hello

  I tried to clean my computer toshiba laptop L505-h-13, when I found a sign of a SIM card under the battery.
  I tried to put a SIM card, but it does not belong. It is directly "swollowed.
  So my laptop does support 3 G SIM? If so, how could I put?
  Concerning

  Hello

  No, the Satellite L505-h-13 doesn't support 3G module.

  I guess as some models of the Satellite L500 / L505 series was equipped with the 3G module.
  The fact is that the same bottom cover has been used in the entire series L500 and is why there is a slot for SIM under the battery.

  Welcome them

• Satellite L505-10V - using HDMI is no pic on external monitor

  I have a Toshiba Satellite with a broken screen and use an external HDMI monitor.
  But now it starts but does not fall into the second rotor and shows do not at all.

  What can be?

  It is not easy to say why this is happening. Restart laptop and try to use the FN key combination to switch to the external monitor.

  How it worked in the past? You have it active manually or desktop was shown on external monitor automatically?

• ACPI fan constantly runs at full speed on Toshiba Satellite L505

  Hello world!
  I recently bought a new laptop (Toshiba L505)... everything works fine except the fan under Linux. It works constantly to max speed and I must say it's quite annoying. I know it is better to have a fan that runs continuously rather than one that is not light up at all, but I really want it to solve...
  See https://bugs.launchpad.net/ubuntu/+source/acpi/+bug/321578 for more information on this bug...
  I think that it is related to ACPI but I tried everything almos (acpi_osi change, acpi = force and other hack kernel). But whatever the OSs I throw (except Windows 7), it is always at full speed (I tried the Chakra (Archlinux), Ubuntu, and PC - BSD). With Ubuntu, I tried the last kernel 2.6.32rc7...

  Thanks ;)

  Hi sunrider.

  to understand why your machine is constantly cooling at high speed, go deep into the linux stuff...

  * but you can try "acpi = off" * instead of 'force' to give the os the ability to manage the material at the level of the api...
  Maybe there is an updated driver/module implemented who knows your chipset...

  If you "force" the kernel to manage equipment of this 'acpi' way and no module is there to do the work... you see it is a bad thing...

  or you are a geek and program a module that manages your chipset to acpi... If yes pls share it with the community...
  of course I'm kidding, writing of modules is not for me...

• Matrix Revolution Cam not recognized on my Satellite M40

  My cam of matrix revolutions could not be recognized when inserted in the my Satellite M40 149 pcmcia slot. The first time was a stranger to me card PCMCIA MTD-0002 and when I updated the driver, it is totally ignored.

  I updated the Bios to v 1.20 and I wonder if I can do more for the location PCMCIA driver, is a Texas Instruments PCIxx21 Cardbus controller / x 515.
  Thanks in advance for your suggestions!

  Dimitris

  Hallo Dimitris

  If you want to use some special hardware like Matrix revolution Cam pick up in a first time information on compatibility and any problems that may occur. It is always recommended to visit the manufacturers support page.

  In any case I found some info that this card is distinguished not by cell phone. Only if 59 pin is detached in the specifications it should work.

  Good bye