It is "possible to achieve endurance mode is automatically turned on in the night?

Similar Questions

• It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

  Hi all

  It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

  Or there is another option to use variables separated and shared at the same time for 2 parallel Sockets (ParallelModel.seq).

  Thank you

  Thank you

  I think it's useful!

• Automatically turn off notifications in night mode

  I just started using the SmartBand and I think it's great and especially function where you can take the SmartBand notify you of incoming e-mails etc but I have a problem/question.

  Is any way to have the SmartBand stop notify/buzzer indicating new emails etc when it is in night mode? Normally, I keep my phone in silent mode don't wake etc. received e-mails while you sleep at night, but I noticed that even if I have the laptop (a Sony Xperia Z2) silent vibrating SmartBand guard repeatedly wake up.

  Of course I could manually set SmartBand OFF notifications whenever I have go sleep and then re-enable notifications in the morning but would be nice if this can be automated, and to be honest I find it a bit weird why this isn't the default behavior because that love to be woken up in the middle of the night as soon as you receive an email etc...

  Many thanks in advance,

  Richard

  Thanks for your reply, but as I said in my first post I know that I can do it this way but I prefer having automated and fact is after doing a few tests now have the SmartBand in night mode, it is not vibrate even if I checked the notification option is great.

  Don't know why it did not work last night but the only thing I can think is that it was not in night mode, well I thought it was.

• Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not what should be checked in t

  Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not, what needs to be checked in the menu options for mode 2 window window... I use Version 23.0.1

  Hi gordie, you could use an addon to restore this configuration of the user interface: https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/

• Get error 'endurance Mode affects lifelog.

  Every so often, I receive the notification: 'STAMINA mode affects Lifelog' and 'Add Lifelog as an application active standby mode'.

  I added to the list of apps to stay active ENDURANCE Lifelog. I removed and re - he added. I rebooted between steps. It appears still after a few days.

  We fixed this issue in the latest version of Lifelog, 2.9.A.0.28, so if you upgraded to this version of the game to Google you should not see the question once again.

• App crash in Ultra endurance Mod message

  Each accident app in Ultra endurance model use this feature in the night. But I can't send a message or whatever it is when it is open.

  HOOOOOOOOOOOOOOOOOORAAAAAAAAAAAAAA

  I find the problem!

  

  When I reset my phone to factory mode, I tested the endurance Ultra mode and I have not seen this problem... So I figured that one of the apps to cause this problem, I uninstalled apps and updates one by one, then I have ENDURANCE Ultra activted mode after each step (Yes, I know, it's the)

• ENDURANCE mode turns off display

  Hello

  I got my Z2 a little over a week ago and I noticed that when I have the STAMINA mode on my screen keeps expire every 5 seconds despite the settings being during 5 minutes. No one knows what it is and how to fix it.

  Thank you

  Reset endurance like this: first turn it off after that, go to settings-applications-all, do scroll up to approx. stamina tap on it and force clear data and stop. Restart the device and turn it on. See how it is.

• is it possible to use a mode c compiler full screen in vista?

  are there any c compiler which is no longer compatible with vista?

  See the article shows and see if that helps: http://jimlawless.wordpress.com/2010/04/19/switching-a-console-window-to-full-screen-or-windowed-mode/.

  If you use the full Microsoft product, see the following: http://blogs.msdn.com/b/csharpfaq/archive/2004/10/20/245408.aspx.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the requested operation is possible in online only mode

  Team,

  The user is confronted with error below, whenever he tries to save all modules.

  «"the requested operation is possible only online to online and try «»

  I checked the site of the ISS is running. Please help,

  Rgds,

  0 start PUK Client 12.1 and see the status in the lower right. If it is online, you need not check the database you connect using the accounts ODSERVER and ODSERVER_APP inside

  If it has disconnected you must perform the procedure for two users below because some of them has the password has expired.

  1 check the port of database and log identifying information by connecting to the database using ODSERVER, do and ODSERVER _APP, of course, they are all unlocked.

  2. If you are not able to connect using these accounts in the database, and you do not know the password for them, (ODSERVER, ODSERVER_APP must have the same password, decrypt the file web.config for the PUK and lower ranks and follow the steps.)

  3. change the passwords for ODSERVER, ODSERVER_APP (owner of the PUK schema) in the database using the old existing password!

  NOTE: the two ODSERVER, ODSERVER_APP must have THE SAME PASSWORD

  example:

  Start > run > cmd

  sqlplus system/passwordupk

  ALTER USER ODSERVER IDENTIFIED BY New_password;

  ALTER USER ODSERVER_APP IDENTIFIED BY New_password;

  Unlock accounts:

  ALTER USER ODSERVER ACCOUNT UNLOCK;

  ALTER USER ODSERVER_APP ACCOUNT UNLOCK;

  ##########################################

  STEPS to decrypt the web.confing to see the password for the ODServer account, in case you don't know.

  -Open a command prompt as an administrator (run as administrator) on the Web server where the PUK is installed

  -Change the location of C:\Windows\Microsoft.NET\Framework\v4.0.30319

  Start > run > cmd > run as administrator > cd C:\Windows\Microsoft.NET\Framework\v4.0.30319

  -Run the following command:

  Aspnet_regiis.exe - pd "connectionStrings" - app /ODSContent - to decrypt web.config UPK12.1

  In case you have PUK and KCenter installed under different Web site, and then default Web Site, you will need to use the commands below to decipher:

  example:

  Aspnet_regiis - pdf "connectionStrings" "C:\Program Files (x 86) \User productivity Kit\UPK developer 12_1Server\Repository.WCF.

  ENCRYPT:

  Aspnet_regiis.exe - pe "connectionStrings" - app /ODSContent - to encrypt web.config UPK12.1.

  =============================================

  also telnet 1521 the DB server window server.  Stat IIS server. check the profile to the right of the PUK SDK. If you need to change the profile.

• Activate the night mode shift

  Hello world

  Is it possible to get the night shift enabled mode low power?

  I do not understand why Apple did it, cause I don't think not that night shift uses a lot of battery.

  And it's very annoying getting the white screen again when you activate the mode for low-power in the middle of the night.

  There is something to do: activate the low power mode and ask Siri to the night shift.

  Of course, I don't want to shout "HEY SIRI!" while my wife sleeps next to me.

  Sorry if my English is a bit odd, I'm french.

  Thank you

  I tested and it doesn't seem to be possible to have the night shift active in Low Power mode. Low power mode cancels simply night shift.

  Why / what Apple does what they do is to Apple. We cannot know the answers that we are fellow users like you. You can provide your feedback to Apple here:

  http://www.Apple.com/feedback/

• MY Sony VAIO VPCEB13FX recovery mode does not start and ask the way to recover mode

  Please help what is the path for VPCEB13FX for the recovery mode.

  Hi rchoksi6,

  The recovery partition cannot be open/covered and is visible in disk management. By default, the recovery media should not ask the way since its preset. It is possible that the recovery partition can be damaged or is (missing a file (s).

• Computer won't turn on after the mode 'sleep'

  My computer acted funny lately when it goes into mode 'sleep', and I have to reboot it until I can do something new. I know I'm not the only one having this problem, I've read the other posts on this problem. Anyway, my keyboard has a sleep button that I brush occasionally, that causes all this to happen. However, I brushed it today, and instead to go just in a coma, the computer entered into mode 'sleep' (the light was orange, noise died down), then woke up to the top in a way where the fan on, but the light went off. I've forced to close and then turned back on. Now when I turn it on, the light and fan both going on, but the monitor remains off, and none of the lights on the keyboard lights up. Is there a simple solution to this, or it will need repairs?

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below.

  The problems of wake the computer from sleep mode

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Hope this information helps.

• Something is wrong! Start in safe mode, but it turns out that for Normal mode.

  Mac Mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Start drive Macintosh HD

  Iris 1536 MB Intel graphics card

  Monitor: DELL U2713HM, use the Apple adapter to connect to the Mac Mini

  I upgraded from Capitan in Sierra and got the problem that after I pressed the power button, the screen is full white. This problem has occurred on the Sierra, never happened in Capitan.

  I went to the Apple store today, they made a few diagnostic and found no problem. Everything is good. System is fine too. In the Apple store, they showed me to press SHIFT after I press the power button and it will start up the Mac in safe mode. They told me this can sometimes help fixing the boot issue. My Mac actually works very well in the Apple store. I tried the power and turned off twice in the store, and there is no problem. I am happy and come home.

  After I go home, I turn on my Mac, it always has the same problem before you go to the Apple store, after I pressed the power button, the screen is completely blank. So I tried to boot mode safe by pressing Shift and taking until I saw the Apple logo on the screen.

  After I log in, I checked my Mac mode, this is actually Normal mode!

  If I intended to power to the top of my Mac in safe mode but it turns out to be normal.

  If I do not press SHIFT and hold it pressed down after I turn on the power, I'll have just a white screen!

  It works very well in Apple store, but not in my own House.

  Anyone know what is happening?

  What is different between your system and the store? Have you taken your own keyboard & they were they that? If you use a bluetooth keyboard try using a wired USB one instead. Is this an original Apple keyboard?

  Do you have other devices connected? If you delete them.

  Please see the article below from Apple, it has information about starting in safe mode without keyboard (by setting a NVRAM variable). If you enter a work boot, you can put the mini in safe mode from there, via the command appears on this page...

  Try safe mode if your Mac does not end commissioning - Apple Support

  I would like to start trying to make another bootable OS disc - either an installation disc or a complete operating system to see if the Mac can be started OK to a different installation of OS - which indicates if the operating system or disk are part of your question, or if the material is simply unable to work correctly at all.

• Is it possible to have search keyword already include some terms in the search?

  For example, if I want to do a keyword search for a Google search with the keyword 'dl' which already includes the terms "site:mediafire.com"automatically. "

  Is this already possible?

  Of course, simply add as keywords before the %s in the bookmark.
  
  You probably can't do it if you add the keyword via search engines to manage, but it should work if you create a bookmark and assign a key word.

  • http://www.Google.com/search?hl=en & ie = UTF-8 & q=site:mediafire.com+%s
  • http://KB.mozillazine.org/Using_keyword_searches

• Is no longer possible to publish a stream in iTunes you and in the podcast store

  Just a heads up-

  We spent several years some of our streams iTunes U published in the regular iTunes podcast store often use the same RSS feed for both. Since the recent launch of iTunes Connect (the new quote and service management of content from the iTunes store), however, it seems that it is possible to submit an RSS feed in iTunes you and the iTunes podcast store. I get a message that says "status: Validation failure ' and 'cannot submit your feed. Your feed had already been submitted. »

  I submitted a ticket to Apple support, but some trial and error tests suggests that there is a workaround. If you have already submitted your feed to iTunes U, you can submit it to the iTunes podcast store but you need to replace the feed URL and the title of the podcast. I don't know if cela a new policy from Apple or a glitch in the new iTunes Connect service.

  Another work around could be to send the stream to the podcast to iTunes store first and then submit to iTunes U public site manager using-, but I have tested this theory yet.

  Tom

  Hi Tom,

  As I KNOW you're not supposed to do this in the first place. (It's what we were told in 2009).

  I guess Apple is simply start applying this restriction.

  Best, Erik