It keeps telling me that the required updates are not installed... I have already installed SP2 and restarted my computer TWICE. Please help me!

Similar Questions

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• Lightroom 5.6 - Application Manager keeps telling me that the serial number is not valid.

  I want to activate 5.6 Lightroom. The application manager keeps telling me that my serial number is not valid. This is not the case. I bought it via Amazon.de and it worked a few months when I could always install Lightroom without the creative cloud. All solutions? Thank you!

  See this thread for the info you need. You are probably trying to activate the version creative Cloud with your license key.

  Try to install 5 Lightroom on 2nd unit, LR will not accept my license code

• The driver updates are not installed automatically when detected by windows update

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Drivers and other optional updates are not installed automatically. According to "to install drivers and other optional updates" in the following link, "to install optional updates, you need to review and then select them from the list of updates that Windows finds for your computer. Optional updates are not installed automatically. " http://Windows.Microsoft.com/en-US/Windows7/Install-Windows-Updates

• WIRELESS MOUSE NOT WORKING - MSG I GET: Windows Update configured to never install drivers. The driver updates are not installed automatically when detected by Windows updates.

  My laptop does not recognize my wireless mouse more and this is the msg I get when I solve the problem.  I uninstalled Windows 6.1 and installed an update of Windows which was supposed to solve this exact problem, including the problem that started the same thing of my laptop does not start correctly.  It takes a long time to come - fans and all start, but take apx 4-5 min of kick.  Every once and a while I get all workers through troubleshooting or by doing a restore - then as soon as you close it down he 'forgets' that you did and the problem is there once again. Help!  FYI I AM COMPLETE COMPUTER MODEL and do NOT know my way and a lot of terms, so be nice and treat me like a child!  TYIA!

  Hello

  1. What is the brand and model of the mouse?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Pease follow the steps from the link to configure windows update to install the drivers.

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

• I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  Hi rgarden95,

  Can you please confirm the exact version of Muse, you open the file with?

  To check the version of Muse, please click Help-> on Adobe Muse CC.

  Kind regards

  Akshay

• When I turn on the computer of mymy and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  Original title: IO error

  OK so I turn on my computer and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  I run an xp windows 2003-04. My computer does not start completely and if I click on debug or put end to the program there just restarts the computer. How can I solve this problem? and is it possible that I can update my software?

  You say that you can not even start in Safe Mode, so method 1 will not help you, method 2 will not help you and 3 method will not help you.

  I start in the XP Recovery Console and first run a chkdsk/r on the afflicted system, but since we don't know anything about your system, we will need more information.

  It is a shame that in the forums MS Answers, the first response to a new question is (or should be) a request for more information...  You are 5 days in your problem, and so for him it seems that you are not getting anywhere.  If the thread goes inactive for more than a few days, the response of the Microsoft Support Engineer will become the 'response' automatically because it has links to the KB articles.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

• no disc in the drive? And file is not supported or the required codec is not installed?

  I have been w work on a project for over 6 month. yesterday, it would not open. First he asked me to point to the location of the video files for 18 files I fortunately work for the last 6 months, and then once I went that it gives me the message:

  ' There is none in the hard disk drive. Insert a disk in the drive\Device\Harddisk2\DR2'

  .. .and constantly stopped upward when I tried to ignore or Cancel to exit (forcing me to go to the Task Manager to close items).

  I should point out that I have worked off the coast of files stored on an external hard drive of 1 terrabyte. However, I am still able to view and open all the ext HD files in Windows Media Player, etc. which eliminates me the idea of a problem with the drive.

  I can open a new project and add the same file/s (first few files for a test run). Following its telling me

  "This type of file is not supported or the required codec is not installed."

  .. .but it worked just the other day, so it IS supported and must have the required codec.

  Moved some files on the hard disk of the PC. Seems to work ok... take back me to the fact that the external hard drive can be a source of the problem, but I can open all the files there in all other programs... so you have PE? Or is it?

  I can't find any similar link on the forum... but if anyone can help or have any suggestions I'd appreciate your comments! See you soon

  Gila Valley,

  Welcome to the forum.

  Can provide you details of your system, your project and your source files?

  It may be best to start a new thread to do this, so that zero confused between your questions and the OP also, since this thread has been marked as answer, many people eventually spend on watching and miss your problems. The more eyes on a problem, the better.

  I would like to look at this ARTICLE for suggestions on the types of information that would be so useful.

  Then, if you collect this info, take a look at this ARTICLE to settle pre, your operating system and also the computer.

  Good luck and thanks for this info,

  Hunt

• I can't uninstall all of the programs on my computer. Also the windows updates do not install. Windows Vista Service Pack 2 for x 64-based systems (KB948465)

  I think I have problems arising from the Windows updates do not install it.

  I can't uninstall all the programs already on the computer - I get the message "Please wait while the current program is finshed uninstall or changed" on every single program.

  Also, anything with an authorisation button freezes as son as I click on it without the authorization window popping up. for example. the clock or the managed task advanced details.

  This has led to problems trying to install other software for example. I tried to install a game that failed, because the .NET framework 4 would not install.

  Help!

  Hello

  You can follow below link that can help you to solve your problem:

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  I suggest you follow the steps in the Microsoft KB article for your problem of update.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

• When I try to open streets and trips 2011, I thought that the registry files are not correct.

  HI, I keep trying to install streets and trips 2011 on my Windows 7 computer.  The installation files say it is installed correctly but when I try to open, I get an error message that the registry files are not correct. Must re-run Setup. It is a brand new program that I just bought.  What is going on?

  original title: streets & trips 2011 will not be installed. Incorrect registry problem files. Windows7

  You're more likely to get a useful response to the Highway, Streets & Trips, MapPoint Forum

  Good luck with it,

• The new update will not install.

  The new update will not install. (it is said there is a problem with a file called spill.aex)...

  I tried to delete after effects to reinstall, but who doesn't either so now I can't the legacy at all.

  THE FIXED!

  I changed the name of the card effects that included the broken file. (still cannot delete the file itself :/ but at least after effects works again!)

• The required fields are not displayed message when left blank

  Hello

  I set fields as required in the value, the field Type as user entered - required tab. Also, I entered a message in the empty Message field. When the user fills out the form, they are allowed to send the form without fill in the fields.

  Any help is greatly appreciated.

  Thank you

  MDawn

  Use the preSubmit event to check required fields / required before sending...

  Check the wire for ideas below.

  http://forums.Adobe.com/thread/606762?TSTART=0

  Usually, if you use the required field and submit the form, it will display the warning message that the required fields are missing, and continue to submit the form. It is therefore preferable to use the programmatic approach for the control on the form submission.

  When you search for the values of field programmatically, you must set the Type property of the value type as input by the user - option.

  Thank you

  Srini

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• WinHlp32.exe KB917607 error: the following updates were not installed.

  Original title:

  WinHlp32.exe for Windows 7

  I have Windows 7, 64 Bit and downloaded the WinHlp32.exe - Windows6 version. 1-KB917607-x 64.msu. During the initialization of the installation, all right. When he moved, he said "the following updates were not installed. Update for Windows (KB917607). "All I can do at this point is to close the program, and my problem is not fixed.

  Run Microsoft Fixit leave of the following and then try to install the update:

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  http://Support2.Microsoft.com/mats/malware_prevention/

• I have a disc first elements 9 and serial No. The computer says that the autorun files are not good

  I have a disc first elements 9 and serial No. The computer says that the autorun files are not good. How can I install the software. If I had an older version of test I could download and use my series to unlock the program. Help

  http://prodesigntools.com/Photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  Follow the instructions carefully.