It supports the VIC2-4FXO map on a router 3925?

Similar Questions

• HOW TO MOVE THE FLAG POINT MAP, MIRCOSOFT 2013

  HOW TO MOVE THE FLAG POINT MAP, MIRCOSOFT 2013

  Hello

  It is not a Community Forum for MapPoint.

  Ask here

  Highway, Streets & Trips, MapPoint Forum:
  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Other Support options (not free)

  Support for MapPoint, streets & trips and Highway:
  http://support.Microsoft.com/ph/851

  Don

• with the google world map, are unable to send my emails

  When I use the google world map, I need to send photos by e-mail.  He worked for a little while then began receiving these errors and mails are not sent more

  Hello

  1. what error messages/codes are you getting?

  2. how you try to send email from the Google world map?

  3. are you using Internet Explorer, open Google Maps?

  I suggest you to ask your question in support of Google Maps. |
  http://support.Google.com/maps/bin/request.py

   
  Problems with Internet Explorer
  http://support.Google.com/maps/bin/answer.py?hl=en&answer=21849&topic=1687362&ctx=topic    

  Reference:

  Sharing
  http://support.Google.com/maps/bin/answer.py?hl=en&answer=144361

  Report a problem
  http://support.Google.com/maps/bin/answer.py?hl=en&answer=162873

  Thank you

• Function editor does not support the pointer to the digital type

  Am I missing something or is it true that the CVI function Panel Editor does not support specifying a type parameter as a pointer of type number?

  I see no reason why he wouldn't or shouldn't.  It supports the pointer to char.  And it supports a table name (which, in C, is a pointer to the first element of the array).

  I guess I could use the array form as a pointer, but surely it's confusing when dealing with a simple pointer to a numeric scalar type.

  I am using the function Panel Editor only for the purpose of creating a dictionary of type so I can call functions DLL in VB.  Y at - he know somewhere how CVI types could are mapped to the VB types when you use the type dictionary?   for example, what happens if I use an unsigned int in a function parameter (VB does not support unsigned integers)?

  Menchar

  Hi Menchar,

  To create a pointer to an integer as a parameter to a function panel, you have two different options.

  First of all, all output parameters are defined as the default pointers.  So if you create an output parameter of type "int", he creates a ' int *' parameter.

  Second, if you want it to appear in the entry list, you can create a data type in CVI which will appear at the bottom of the list.  Data types to change your data types, go to the Options"(you must have a function Editor tab open and selected Panel to make this option available).  Enter the name of the type (in this case ' int * ') and click the Add button.  The new "int *" option should now appear at the bottom of the list.

  Third, you can use the array form (int []), but as you say, which can be confusing for other people looking at the code.  Or the other of the two first options are better choices.

  As for your second question, here's a link to a page MSDN showing types in Visual Basic and their representations .NET: http://msdn.microsoft.com/en-us/library/47zceaw7 (VS.80) .aspx.  This allows to make a comparison between VB and ANSI C data types.  For example, to ask on unsigned integers, and this site shows that Visual Basic has an Integer type (-2,147,483,648 through 2,147,483,64) and an unsigned return, UInteger (between 0 and 4 294 967 295).  From what I can tell, VB has signed versions of all its digital representations.  You can then take this with a list of ANSI C data types to convert between the two.  A list of ANSI C data types can be found here: http://www.exforsys.com/tutorials/c-language/c-programming-language-data-types.html

• When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  Original title: fingerprint digital mapping

  When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  I tried the fix (http://support.microsoft.com/kb/890737?wa=wsignin1.0) without success.

  Any ideas?

  Hello

  Have you tried to reinstall the fingerprint reader, as mentioned in the previous post article?

  If your computer is on a domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
  Windows XP IT Pro Forums
   
  For more information, see the articles:
  Understand and configure the Welcome screen and the classic logon screen
   

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Error on the network drive mapping

  Hello

  From an XP machine, to another XP machine which is used as a server temporary database (with just the back end of a split MS Access database) I get the following error trying to map a network drive:

  Error loading Setup50045.fOn

  A dll initialization routine failed.

  There are about 9 other users that connect successfully to this shared drive, and this particular user, logged in as long as another user in the same machine, map this drive without any errors.

  Please if anyone can help.

  Thank you in advance!

  Hi PsyberFox,

  Method 1

  I suggest that you perform the restoration of the system to the point while it was working fine.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2

  If the previous step fails, see if the problem persists on a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Method 3

  If the previous step fails, then you need to repair the Windows XP installation and check if it helps.

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• I would like to know how to redownload the area of map imed on my computer, I got to it before that I had to restore my computer but now he tells me he is not compapable, why is this?

  my computer won't let me download the area of map Sanchez or Captain 10 print since I had to restore my computer to magf settings and I got here before that and had no problem with it, can someone please explian why or help me solve the problem that I really love both the progams and used them both much thanks.

  Hello bashfulunicorn,

  You should check with the manufacturer of the software if it is compatible with Windows Vista. My research I found that the PrintMaster 10 is designed to work with Microsoft Windows 95/98/NT/2000, so in order to to use with Vista, you should try to install iwn compatibility mode.

  Run the program compatibility Wizard

  1. open the program compatibility Wizard the by clicking the Start button, clicking Control Panel, click programs, and then clicking on use an older program with this version of Windows.

  2. follow the directions in the wizard.

  See the bottom of the article for more information on this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• The dv6429ea specification supports the "HP Atheros AR9280 802.11a/b/g/n WLAN mini PCI card"?

  The dv6429ea specification supports the "HP Atheros AR9280 802.11a/b/g/n WLAN mini PCI card"?

  I mean, I want to change the map type Wireless 'G' for a type "N".

  You have any advice?

  Thank you very much.

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01035677.PDF

  Chapter 3 lists all cards supported wireless. I see no support for wireless since any N cards.

  I don't see the BIOS updates that add support for any model of card N Wireless either.

  Installation a unsupported card will cause the laptop does not cranking up what the card does not support is removed.

  Paul

• Number of the invoice not mapped correctly

  Hi all

  We have webcenter 11g installed imagery. Imaging agent to server entry is configured so that each time we receive an invoice a SOA service call is made. In Manage Applications in Imaging, we have created an application and page definitions Feild, we have created the following fields.

  The invoice number

  Date of invoice

  Invoice Type

  These fields were assigned to the payload as a format value. Date of the invoice and the Type of values to match correctly. But invoice number is get mapped to vendor number and so in demand SOA we get the supplier number value in the bill number field.

  Someone can explain how to create field definitions and assign it to the load of the SOA. is there a naming convention to follow?

  Also, we need to map the amount of the invoice to the payload as well. When we created our files are less error out with the error message.

  A value was not given for a required field. Field: Id - 6, name - Bill Amount@Support

  Thank you.

  Kind regards

  Deena

  Have solved it. the input fields mapping need in managing the Webcenter Imaging screen entries.

  Concerned,

  Deena

• Network of twinning with Port trunks to support the host ESX VShere 4 with several NIC for load balancing across a HP ProCurve 2810 - 24 G

  We are trying to increase production of our ESX host.

  ESX4 with 6 NIC connected to HP Procurve 2810 - 24G 2 ports; 4; 6; 8; 10 and 12.

  The

  grouping of parameters on ESX is rather easy to activate, however, we do not know

  How to configure the HP switch to support above connections.

  Pourrait

  someone please help with a few examples on how to seup the HP switch.

  Help will be greatly appreciated as we continue to lose tru RDP sessions

  disconnects.

  Best regards, Hendrik

  Disabling protocols spanning-tree on the Procurve ports connected to the ESX host is going to promote a recovery more rapid port. Similarly, running global spanning tree is not recommended if you mix some VLAN iSCSI and data in the same fabric (i.. e. you do not want a STP process to hang storage IO). Spanning tree on your switches, look PVST (or Procurve BPMH) to isolate the STP VLANs unique events.

  In regard to the load balancing is, by default (route based port ID) value algorithm requires less overhead on the ESX hosts.  You may not use LACP on the Provurve the lack of facilities LACP ESX. You must use "route based on the IP hash" sideways ESX and 'static trunks' on the side of Procurve. Unless you have specific reasons why your network need loads this configuration, I'd caution against it for the following reasons:

  (1) IP hash requires thorough inspection of packages by the ESX host, increasing CPU load as load package increases;

  (2) the static configuration puts switch physics rigid and critical ESX host port mapping. Similarly, groups of ports all will fail as the Procurve batteries for management only and won't be on switches 802.3ad circuits Group (i.e. all ports of a group of circuits must be linked to a single switch) - this isn't a limitation of the port ID routing;

  (3) K.I.S.S. love port ID mix of port ID, beacon probe and failover on the port assignments you will get segregation of the raw traffic without sacrificing redundancy - even through switches.

  I hope this helps!

  -Collin C. MacMillan

  SOLORI - Oriented Solution, LLC

  http://blog.Solori.NET

  If you find this information useful, please give points to "correct" or "useful".

• My phone is 6 more. Is it supports the feature tactile 3D?

  My phone is 6 more. Is it supports the feature tactile 3D?

  No, tactile 3D was introduced on the model 6s.

• How many ethernet modem ports should have to support the airport Time Capsule

  I have a question: how many ethernet ports if a modem must support the airport Time Capsule?

  One (1)

• where can I find firefox for Windows 10 who support the JavaScript and Norton

  I had problems all this Sunday can not enter in the emails. bankAccounts or facebook because allways firefox41 tell me I need to install and activate JavaScript. I have Windows installed 10. My laptop is 1 year old HP. I also prefer to use Norton. What can I do? Can Andy I find an older version of Firefox in Norwegian?
  Thanks for listening.
  Michele your

  Firefox's JavaScript should be enabled by default. Can you provide more information about the messages that you have found on this subject?

  At the same time, to examine the question of Norton and your language:

  Norton has been a big topic of communication of updates for Firefox via LiveUpdate a few days before each new version of Firefox is available. But that changed with Firefox 41. Due to the change in Firefox (which was originally going to be in 40 Firefox but was delayed at the request of Norton and maybe a few other companies), the toolbar needs major changes and they are still not available yet. Norton issued a statement on this subject: https://support.norton.com/sp/en/us/home/current/solutions/v115161915_EndUserProfile_en_us

  If you want to use an updated version of Firefox that allows to run the current Norton Toolbar, there are another option. You might consider a different variant of Firefox called the Extended Support Release (ESR) for the moment. ESR is designed for businesses that require a cycle time longer between changes to the features, but anyone can run it.

  ESR is currently based on Firefox 38. It will get updates of security over the coming months, but not to get new features, so changes in Firefox 41 concerning the compatibility of the add-on will not be out for a good time.

  Norton is likely to continue to support the ESR until the new update of toolbar. After that, I don't know what they will do because normally they don't take over a small range of versions.

  If you decide to try it, here's how I suggest to install:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 38.3.0esr of https://www.mozilla.org/firefox/organizations/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\Fx41
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\Fx41
  

  (D) run the installer downloaded to (A). It should automatically connect to your existing settings.

  Success?

  Note: Some plugins can only exist in the old folder. If it is missing something essential, present in these files:

  • \Fx41\Plugins
  • \Fx41\browser\plugins

• Updated to 39.0 curser now do not show marker titles in the API Google maps unlike the previous version, what has changed?

  If you open this link http://edwardfrey.com/map/2015.html a map with markers. When my cursor hovers over the mark a title appears. If you click on the marker of a pop up will show newspaper when you click will opens a page of newspaper on the date indicated in the pop - and there will be a map included in Scripture upwards to this day here.

  The roadmap also has markers with titles. Before 39.0 I could hover and see the title, now I can't. When I move the pointer to the marker cursor turns into a hand, in the previous 2015 map the cursor turns to a pointing finger.

  Example: Click on the marker - 0 - then log. This web page http://edwardfrey.com/peregrinating/period61.html#11
  December 11, 2015 with a map showing the three markers that all have the title but I can't see them.

  I fixed my problem FireFox 39.0 title of marker. I started using Internet Explorer 11 for all of my web site work and evidence/change what I did. About a third of the visits to my site, use FireFox although I don't know how use the 39.0 version. The problem of the title existed before it got worse and there are probably few of these FireFox users each glance at my cards yet less hover over the marker to see the title. Problem solved!

• The document _ is on a volume that does not support the permanent version storage.  You will not be able to access older versions of this document once you close.

  I recently started getting this strange message, usually when a Pages document is closed:

  «The document _ is on a volume that does not support the permanent version storage.»  You can access older versions of this document once you close. »

  All my research (apple.com and on the internet) have not enabled all the information on this message.

  Hi Larry,

  The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.

  OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.

  Kind regards

  Barry