It takes about 6 minutes for the computer to boot.

Similar Questions

• We know the answer slow printer. We use XP and it takes about five minutes for the printer to answer.

  We know the answer slow printer.  We use XP and it takes about five minutes for the printer to answer.

  Hello

  1. have you you can all changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. have you updated the printer driver?

  Try to run the fix it tool in the following article and check.
  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

• Start-up phase takes about 10 minutes for bot

  of course I changed something on my departure upward. now, it takes about 10 minutes before my office show upward. When I turn my computer on my screen is blue, almost black, and I get a dash flashing (-) in the upper left corner. it flashes for about 10 minutes. before he finally start. Help!

  [Moved from comments]
  

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems when the computer starts.

  1. what operating system is installed on the computer?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check to see if the same problem happens.

  Method 2: Try to run the troubleshooter of Performance:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 3: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  (For Windows Vista)

  Method 4: If the question does not exist in Mode safe mode then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  More information: Optimize Windows 7 and Vista for better performance:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Please follow these recommended steps and post if you still experience the problem.

• Turning on and turning off T61 takes about 5 minutes for each.

  I have a CTO of 6465 t61 and it is extremely slow when I power upward or turned off. It takes 5 good minutes each way. I have always run my norton anti-virus, defragment and clean temporary files, etc.. Can someone suggest a solution.

  Thank you

  Thanks that did the trick.

• Aero on vista on seems to make execution slower and start upward after the microsoft icon on screen-it takes about 1 minute to get on the desktop! Otherwise everything else is relatively ok - for vista, that is _

  I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
  Help!

  I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
  Help!

  You can read this:
  http://www.Vistax64.com/tutorials/81176-speed-up-performance-Vista.html

  t-4-2

• You try to transfer data to new computer, takes about 30 minutes to collect data, and then told me that it will take 33 + hours of transfer

  I have 2 PC, two 40 g X 2 g, an old score about 12 GB of data, 71% free, new is ready to receive. When I make the connection with a null cable and start, it takes about 30 minutes to put together and start the transfer, but it gives a transfer time of 33 + hrs and that means, I let it run for about 6 hours, and he was always less than 6% of fact. No games or large, larger files is about 12 MB. Any help? Bob

  If cable "null", you hear a serial RS-232 cable, you probably chose the slowest method of data transfer possible.  A serial cable tops out at raw data of 115 Kbps (115 000 bits per second) rate the most current Ethernet 100 Mbit/s connection - is about 1000 times faster.

  I don't know why some s/w you use takes 30 minutes to "collect" information before starting the transfer, but if you have about 12 GB of data (and don't have / want an Ethernet connection), why not just get a big enough USB.  You can get a 8 GB USB key for less than $15 and a 16 GB for about $20.  If you have USB 2.0 (which is likely, unless your old computer is older than 10 years), the maximum raw data rate is 480 Mbps with rates effective data around 20-30 MB/s for the memory sticks.

  At 20 MB/s, 12 GB should be transferred in about 600 seconds or 10 minutes.

• Roxio takes about 190 minutes to compress my dvd for burning, is this normal?

  Time to compress the video

  I have a laptop Dell Inspiron N4110 Win7 professional.  The laptop uses a dual-core Intel Pentium B940 / processor dual thread clocked at 2 GHz with 4 GB RAM and 200 GB of free space on the hard disk.  I am recording video analog (NTSC) and stereo audio to aid Easy VHS of Roxio hardware to DVD / software package.  Video is scanned in real time by the A/D converter.  A 100-minute VHS video produced a mpg of 6.13 GB hard disk file.  The compression process of Roxio to shrink the file to mpg of 6.13 GB less than 4.7 GB for recording on a DVD + R single takes about 190 minutes.  Is it a normal time for my laptop?  Are there other programs of compression that would be much faster?    Would be a better laptop with an Intel quad core / 8 processor i7-2860QM thread and 8 GB of RAM to reduce the significant period of time compression, for example less than 60 minutes?

  DVD-video is encoded more time-based
  as the size of the file. Compression is not necessary.

  A video file of 100 minutes should fit on a 4.7 GB DVD.

  Have you tried Windows DVD Maker?

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

  The following freeware can also be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• It takes up to 4 minutes for the player switch between library and Rip, and vice versa.

  I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.

  Hello Absno69,

  Thank you for your message.  You mentioned that there were no new software installed before that happens.  Were there any hardware changes or updates?  If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively.  Click HERE for the system restore instructions.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 HP is responsible and can run for 2-3 minutes then the computer crashes and returns to the startup program

  After opening windows computer HP 7 is loaded and can run for 2-3 minutes then the computer hangs and goes to the startup program. However, in safe mode, it remains open without any problems. Recently, the only problem I've had is that the MSN server is not running and has been replaced by BABYLON, who refuses to uninstall itself. I system restored to all the possible dates and problem remains. Can anyone help please

  Scan with these two free tools

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Malwarebytes.org/products/malwarebytes_free/

  What anti virus or third-party maintenance utilities have installed?

• The Print Test takes about 15 minutes to complete.

  I have the same problem with a D1520. I went through all the self-help and the Test print. The Print Test takes about 15 minutes to complete.

  This is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• Get the blue screen for about an hour after the computer on in the morning, citing "kernel_stack_inpage_error"

  I started having the blue screen about an hour after the computer on in the morning, citing "kernel_stack_inpage_error"  The error after reboot report cites an error of the pilot, but not accurate, and I don't know how to find out which driver would be.

  Hello

  ·          Since when are you facing this problem?

  ·          Remember to make changes to the system?

  ·          What is the exact error code that you meet in the blue screen?

  ·          When you encounter this error on blue screen? This happens at random, or whenever you access any program?

  I suggest you to follow the steps mentioned in the article below and let us know your progress.

  You receive an error message on a Windows XP-based computer: "Stop 0 x 00000077" or "KERNEL_STACK_INPAGE_ERROR": http://support.microsoft.com/kb/315266

• L20 - 264 takes about 10 minutes to stop

  Hi my L20 - 264 is very very slow when stopping down, standing or hibenating.
  Select start/turn off computer he can takes about 5 minutes to bring up the options bar. Of and then selecting turn off for example then pick up another 5 minutes before the laptop actually powers.
  There is no software hogging the system because I've been surfing or play media files.
  Is due to the fact that it has only 192 MB of ram, because I thought the upgrade anyway. Or I am barking the wrong tree?

  See you soon

  Hello

  I agree with Jonathan

  A little more RAM can be very good, and it can make your device faster and more flexible. I recommend you to check all active running process. Generally, many of them is absolutely useless, but they can slow down the system quickly especially if the device does not have a lot of RAM.

  I recommend clean up the operating system, use the Defragmenter tool and check applications that start with Windows. Many of them may be disabled. Enforcement antivir may also slow the operating system currently running. Check all this. I hope that your device will work better.

  By the way: the compatible memory module for your device are
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)

  Good luck!

• Startup takes about 5 minutes to complete to start on my HP laptop.

  Desktop loads upwards just fine, fast, straight bar tool with the exception of the Wi Fi Connected icon, it takes about 5 minutes to appear, this time on that hard drive lite is a little hard. If you tap the icon on the tool bar network bars she says you are connected. If you try to open something out of the Office during that time, he just sits there watching waiting for you to start to complete. Once starting over thing work fine, that too, if you plug in a USB key during the startup time (5 minutes), you hear the sound that you always hear when you plug one but it doesn't appear in Windows Explorer until after 5 minutes of waiting. I did a system restore to a moment where it was sunny and that did not help. I ran a defrag on the C drive, I ran a disk check, with no errors found. I look in the task during this time Manager, and you see no programs running. I run Malwarebytes and Super Anti Spyware and nothing detected. Can someone help me with this?

  Hello

  Welcome to the Microsoft Community Forum.

  I understand that the process of starting your computer is slow. Let me ask you a few questions to better understand.

  1. What security software do you use?
  2. You did it all meaning hardware or software change?
  3. You get the error message? If Yes, when and what is the exact error message?

  I suggest that you perform a clean boot procedure, and then try to install the add-in.
   
  See the link to perform the clean boot.

  Method 1: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Important: Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  Note: See " " How to reset the computer to start normally after a boot minimum troubleshooting "to prepare the computer to start as usual after troubleshooting. "

  Method 3: Optimize Windows performance

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  Method 4: You can use the provided patch below it article and check if that helps to solve some problems.

  http://support.Microsoft.com/mats/slow_windows_performance/

  You can also see the article: Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2

  http://support.Microsoft.com/kb/977419/en-us

  Please come back if the problem persists, we will be happy to help you further.

  Thank you

• My Satellite is really slow and takes about 10 minutes to open a session

  Hello

  My satellite phone is really slow and takes about 10 minutes to open a session. It also takes awhile to open up applications in particular the internet. Once the internet is open, it takes a while to access the net. The application actually drags across from the scene and it looks like a curtain closing additional idling.

  Need help.

  Concerning
  Russ

  Hello

  Have you checked the CPU usage rate?
  Start the Task Manager and check if any strange background process needs the full CPU performance.

  I also recommend to check the laptop for some viruses and malware. These programs could make the laptop and the lazy BONE.

  However the portable equipment could bad work.
  You should check the memory using the Memtest86 program. It s freeware. Check the HARD drive for bad sectors and also try to defragment the HARD drive!

• HP M602: M602 takes a long time for the first page of the printer

  I have a M602 when you send a print job, it takes 2 t o 3 minutes for the first page to print.  The following pages and then slowly but surely print.  The next print job then begins the same cycle.

  We had one where I work where it is one of the complaints and a firmware update seems to make a difference.

  Firmware update also tackle the problems of security and they are free.

  Firmware upgrade is found in the software section and drivers from the support page for your printer on hp.com.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...