It takes case or cover?

Similar Questions

• An appropriate case or cover to Yoga 2 8 Tablet?

  Nobody here don't know or use a good case/cover for their Yoga 2 8 "tablet and if so, where did get it?

  I have some on eBay and Amazon have looked but can not make my choice.

  All answers gratefully received.

  

• HP Officejet Pro K8600dn: officejet pro k8600dn power, which takes up and cover open lights up on

  My Officejet Pro K8600dn shows the lights of the next panel: Power On, which resumes and cover open. No mention of this flaw in the user manual. Cannot print at all. Attempted to trigger the switch cover, but to no avail.

  Dear Rock_Doc,

  Please follow the steps in this document depends on the lights that show your all-in-one:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-K8600-Printer-series/3434445/model/3434446/document/c01289436/

  I hope you find it useful.
  
  Greetings.
  
  * I am not an employee of HP, my work is voluntary.
  
  If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

• Tag Chooser structure case

  Hi people,

  Is it possible to change the label name of selector structure case as VISA property node programmatically done

  in a control, for example?

  I fixed some labels, but in certain situations, I want to change the labels of this case structure until the software get to the top

  in this case structure.

  Thank you very much

  Henrique

  Don't know what you intend, but you might consider a 'mapping function' to achieve this flexibility.  Suppose you have a Case statement with 5 cases - call - the Initialize, take example.

  The Gain value, sign change, exit.  Now suppose you have 7 States, State 1, State2, state3, state4, State5, state6 and crown7.  Write a function (possibly with controls) called "State to State" which takes State1... Crown7 as inputs and outputs of the sample appropriate to take cases labels, Initialize, etc..  You just have to change the mapping function and the States plan to whatever your card tells them to.  If you make the Map function have a case that he controls, you can make a case (the map selector) exactly the performance mapping you describe.

  [Sorry, I'm hiking here, but I hope you get the idea...]

  Bob Schor

• 2 questions: Licensing an image for a book cover

  I found an image Adobe Stock I want to use on the cover of my book. Two questions: 1) is - should I buy an extended license through eu.fotolia.com because Adobe doesn't offer licenses? (2) article 3.1(b) of the States Adobe terms of additional Stocks (General Restrictions) that I can't "share the work with another person or entity. Does this mean that I can not send the image to the person or the company I hired to design the copy of my book? Please specify. Thanks for your help.

  Hello

  - Can Adobe Stock Photos be used for book covers?

  As a general rule, you can use an image Adobe Stock for the cover of your book. There are a few exceptions. The image cannot provide the main value of the book. In most cases, the cover is simply decorative with the contents of the book providing the value of the primary. Another thing to keep in mind is that the use of the image may be perceived as offensive by a model presented in the image. No romance, hot, content policy, etc. The draw of the limit is 500,000 if you should buy an additional license if you exceed sales 500 000. As always, don't forget to consult the license agreement for more information on the permitted use and if you are still unsure, it may be in your best interest to get legal advisers to revise the agreement in your name as well.

  Please also check 2.3 employee and contractor use

  Thank you

  Bev

• 6s Audio on video playback zoom

  I searched the forum and found no answer to this topic, so I hope that this is not an intractable situation.  The latest videos of a few I recorded had a unpleasant buzz during playback, and I don't know why. It does not resemble a ground loop, more ground loops should not happen when not connected to a plug. Strange. Thanks in advance!

  Here are a few things to try. Tests after each of them.

  Force the application to close, then open the camera again. Restart your device, and then open the camera again. Take off from any case or cover on the phone and try again. Try to record video with the front and rear cameras. If you hear the hum on a single camera, take your device to an Apple Store or authorized Service Provider for further assistance. If you hear the hum on both records, back up and erase your iOS device and set it up as a new device.

  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

• R5500 fanless video and high output

  I have a R5500 with dual processor.  today I went to do a reboot after an update of windows, and he never came back.  Essentially and now have attached a monitor:

  1. Lights.
  2. Digital lights go from 1 to 2 to 3 to 4
  3. End up with 3 and 4 illuminated.  Think that it always does.
  4. Hear hard disks turning upward.
  5. Fans of start low nothing in video.
  6. Wait a minute, fans start gets carried away a little bit.
  7. No video.
  8. Fans start yelling again nothing.  No hard drive no light activity either.

  Ideas what is happening here?  I can say that at some point I saw in the case log (have dell monitor installed if questions order) it shows a failure of the raid that seemed weird that hard drives did not work and only the raid I have in this device at the moment is the PERC 6 / i.

  Have had problems before where I had to pull on the power cord briefly and plug it in again so he can turn it on.  I have a new food there so not food I guess.

  Can say that when I take off the cover, three fans on the left side are running fast and those on the right are running more slowly.  Don't know the last time I checked this system, a CPU was idle at 55 degrees, the other at 35 degrees.  Can be nothing but trying to provide all the information.

  Thoughts?

  Thank you.

  Steve

  You probably never noticed it but most of the systems with diags stop LED on various strains of numbers - 34, 12 etc. - during the POST that the system checks components are there, no failure etc.

  Once the MESSAGE confirms that everything works ok it allows starting system in the o/s as usual and the LEDS go off on this model. If there is a problem during POST, the system stops on what caused the problem and goes no further until it is resolved. This is where the LEDs numbers; They let you know what has failed.

  So to confirm. That your system is loading the operating system and the LEDs are out, this means that the system is now working properly

  Hope that explains it for you

• BlackBerry worried Q10 on the numbering of Pocket!

  Hello! So I used to call the cops of Pocket composition of at least 38 times a day lol it sucks, but now I use a password lock screen more of a case to cover the screen so I can't have a Pocket dial. I noticed that they even updated the "Emergency call" button to where not only you have to click on it, but I also have to call 911 as well. Who is now a secure enough phone from Pocket composition now. However, there is one thing that will annoy me because I bought a new case for my phone which does not cover the screen, now after I text someone or something else, I lock the phone, but it takes about 1 minute without touching the screen for the password screen to come, so I can win again accidentally someone dial for a minute. Is there anyway that I can put my BlackBerry Q10 where do I type a certain touch before I can slide my phone to take me to the password as an iphone screen? Thank you!

  An OEM Holster will have a magnet hidden inside, placed exactly there where a receiver exists on the device. When they come into close contact, the device will be locking password (assuming that on screen password security, you have that selection is enabled). That's for cases, make sure that they are either OEM or make it clear that they are for your phone model (the receivers are in different places on the various devices).

• BlackBerry smartphone keyboard and touch sreen freez at the same time

  Hello! I m very very disappointed!
  My bb torch9800 is just 1 year old, but has a big problem:
  The keyboard and the touch screen do not work so that I can receive calls (without the phone pic); I can receive text messages, emails, different opinions without reading the beaucause of all my keys are not yet the touch of the screen.
  I always take off my batery and then put if I want to read my messages or facebook notification. But the problem is when I have to enter my PIN: I have to beat again with the same problem (after an hour or 30 minutes I could success).
  When I finished reading my messages or when I finished for use. it freezes again...
  I m really really tired and very disappointed. I thought m to buy an iphone if I can get a solution to this problem.
  Is someone else had this problem? and how do fix you this? I really need your help (because I always take off my batery and put back every time when I want to use my phone and it would take me 30 min - 1 h before starting work)
  Thank you.
  Kind regards.

  I removed my case and cover for the back; It looks like it works. see until tomorrow. But I m very excited and I love my blackberry. (now I m afraid to challenge my cover... my battery is visible lol)

• Tungsten C - no wi - fi

  I just bought a Tungsten C on eBay.  When I activate the WiFi he only says 'no signal' when I'm standing in the heat of the hot spots.

  I wonder if this PDA was purchased in another country, France for example, then it would be unable to work with wi - fi British frequencies. The seller was very unhelpful, so is it possible to check what frequencies this machine is made for? Or is there another explanation for the problem?

  I understand that there should be a serial number and MAC address on the back but there is only an empty metal Panel. The seller refuses all knowledge of what it is about that. The MAC address on the news of Wi - Fi is administered by 00:07:E0:13:C5:CC. Is it possible to find more information on the PDA from these information, such as serial number?

  Thank you.

  Chris

  I fixed it!

  Thanks a lot for the pointers. Here's what I did:

  First I watched the BrightHand.com feed WyreNut suggested (http://forum.brighthand.com/showthread.php?t=96641&highlight=wifi+fix). I don't bother with the idea of twisting the case because that seem more likely to create more problems to address. The photo on this page of a Tungsten C with the back removed clearly shows that the wi - fi device is easily accessible, right there in the middle. It looked like a simple question to consider, so I decided to do exactly this.

  First of all, I did a little research to find more tips on opening the case. http://www.PalmInfocenter.com/forum/viewtopic.php?t=29420&highlight=&SID=75e75d07a08499708d183da4ecd539d8 has some good pictures showing how to go even further with stripping down to a and C, until the replacement of the screen (this page starts watching a Zire 72 but goes on the Tungsten C below).

  http://www.gethightech.com/Merchant2/merchant.MV?screen=CTGY&Category_Code=Rd has instructions for dismantling a lot of PDA. Strangely their photos of the tungsten c. do not show the wi - fi device, but their instructions to open the case have been invaluable:

  "With the 4 screws removed you can take the back cover of the unit." The back cover is clipped so it can be difficult to remove. So trying to pull the back cover directly to the exit at the back. »

  It is a tight fit, that I overcame by lever the case with a butter (not sharp) knife.

  Fortunately, I already had a Torx screwdriver to remove the four screws of the housing. As well as a few other tools, it came with a spare battery that I bought for my 72 s Zire, although I did have the time of mounting the new battery because open this machine looks much more formidable than the C.

  After removing the back of the case, the wi - fi device is immediately accessible. I he waved gently (wearing a braid to avoid damage to static). There was no sign of slackening, so I removed the wireless unit, which is just a small daughter card held by two screws with a connector plugged into the motherboard. There is also a lead that you can see in the photo on BrightHand.com, ranging from the right of the wi - fi device up to the top right of the PDA. I unplugged that too, but I advise anyone else not to do because the connector could easily be damaged when plugging it back, although mine was fine. So I just put everything back together again, without worrying about cleaning the contacts as they clearly were in perfect condition.

  And it worked!

  It is true that the solid locked PDA downloading the home page of Google with the browser integrated, but I don't know that I can fix this, maybe by installing Opera.

  To summarize, the Tungsten c wi - fi is a daughter card located on the back of the motherboard. It seems that this device can move, so that it does not have a good connection. If wi - fi does not work and that the number of MAC is correct (much information about this potential problem can be found with Google), then try this:

  1. open the housing by unscrewing the four screws with a Torx screwdriver and pulling or by levering on the back, downright backward so that the back of the case of the rest roughly parallel to the body of the PDA.

  2. remove the two screws which hold the card WiFi, then pull the wi - fi free, new device to keep parallel to the motherboard. Don't forget to take anti-static precautions;

  3 put all back together and see if you have fixed it!

  Thanks a lot for all the help. Next step, the Zire 72 battery...

  All the best,
  Chris

  Message relates to: Zire 72

• Designjet 5500: HP Designjet 5500 - failed hard drive?

  My next plotter Designjet 5500 has the error message: "failed to start.  Error: 1f50007.  Hard drive failure. "I took out the hard drive.  Then I took a good hard drive on another plotter Designjet 5500 I have here (he has other issues, but the hard drive is in good health) and installed it in the abacus of 1st.  He repeats the same error message (i.e., "failed to start.  Error: 1f50007.  Hard drive failure. "I took that hard drive back out and put back in 2nd tracer and it always starts very well.

  For me, this means that probably the hard drive is not really the problem with my 1 tracer because I put a hard drive perfectly well in and he said that the hard drive has failed.  It seems that something has no who is now saying the plotter that there a defective hard drive when it's not the real problem.  Someone else this experience?  Pointers for me on what to look for or what would be my next step in troubleshooting?  Not covered in the manual on the defective hard drive errors.  Only how to remove and install a.

  Thank you.  Erica

  Unplug the printer.  Loosen the screws and remove the print server plug at the back of the printer (he shoots just to the outside), then take the back cover off long.  Look for the two lights, amber and one green on the circuit on the left.  Lights are on the top left of the Board of Directors (main PCA).  If you do not have both lights then it is most likely doesn't have the power of power supply Board (the circuit board to the right of the hard drive).  My experience has been that when the power Board fails, the error you see is that the hard drive will not start.

  If you have already tried a known good hard drive and have the same defect, it is most likely the problem.

  Tell us what you find.

• How can satellite P300-156 - I clean it?

  Don't clean my laptop inside, but I did not now what live I have to remove.
  If someone take the back cover of any P300 to clean the fans, maybe send me photo or instructions, I have to do step by step.

  Thank you very much.

  PS:
  Sorry for English has something wrong, then please fix it :)

  Hello!

  If you want to clean the fan you must disassemble the laptop. It is not necessary.

  You can use the jet of compressed air. This could blow out the dust from the cooling fans.
  This jet of compressed air, you can get a local computer retailer.

  I hope it's useful for you.

  Good bye

• HARD drive upgrade to 320 on Satellite Pro A200SE - 1 X 6

  Hello

  I recently bought a Toshiba laptop Satellite Pro A200SE - 1 X 6, that it came with 80 GB hard drive and I want to upgrade to 320 GB HARD disk, is it possible?

  At the back of the laptop, I found a compartment for a second HDD to HDD2.
  I tried to open it by unscrewing the screws but I couldn't take off the cover even after I removed the two screws, could someone help me on how to remove the cover HDD2? *

  Last question, what type of HARD drive I need to purchase?
  I thought it might be SATA!

  Thank you very much
  Taha

  Hello

  I m not 100% sure if a HDD 320 would go well on your Satellite A200 and BIOS recognize it without big problems.
  First of all try to test it somehow

  With regard to the second disc cover HARD;
  I have an A200 Equium and same second HARD drive Bay is available on my laptop.
  The plastic cover is fixed ONLY with these two screws and after the withdrawal of these two screws, you should be able to remove the HARD drive Bay cover too.
  I know a little bit more difficult but try to use a thin object and try to leverage.
  But be careful!

  Just a note;
  Not all A200 supports the second HDD! But the second span is always available.
  Yes, it's a bit confusing (I was too confused), but it seems that there are different models with different motherboards and that's why the second HARD disk controller is not always there.

  Welcome them

• RAM NB200 upgrade. HOW?

  Hello

  I think to upgrade memory of my netbook because it has 533 Mhz ram on board. So before buying new f, I tried to take a cache-location ram on netbook, but I failed. It seems that something locking cover, maybe someone knows what is the reason? Maybe I should take a main cover first?

  I also have a question about the type of RAM. That it fits better for this machine?

  Thanks in advance.

  I just made this upgrade of RAM and it took me a few minutes of fiddling around with the lid until I could go down and then another few minutes to put it back on after the upgrade. You can use your fingernail or a small screwdriver to jump off. To put it back on, just pushing it in, you will hear a click when it is resting itself.

• Microphone does not work well when recording video to work

  For the last few months, my phone has this kind of problem whenever I wanted to record a video. The audio in the recorded video may not be heard clearly, even with the highest volume. There sounds caring as wind noise even though I'm far from any source of wind such as fan, or when recording. At first I thought it was problems with the listener; probably I had disconnected the wrong way. But after trying a few times, the result is always the same. When I tried to record audio using voice memos, the audio is properly can be heard. This problem only occurs when you record a video. Please help me.

  Hi afiqahroshidi,

  Please visit Apple support communities.

  It seems that your iPhone does not record clear audio as well as your videos. It seems that you have identified that the background microphone (used to record voice memos) works, according to get help with microphones on iPhone, iPad and iPod touch.

  Then, try the following steps, coming from the link above.

  If audio video recordings of soft sounds, or Siri can't hear you, ensure that the microphone near the iSight camera - corner of your iPhone on top, bottom, the receiver is not blocked or covered.

  If the microphone and the receiver are not blocked:

  Get help

  If you still have questions after you test the microphone on your device, try the following steps:

  1. Unplug any accessory plugged into the headphone jack.
  2. Avoid blocking the mic microphone and iSight with your fingers while holding the device or video recording.
  3. Remove the protection of screen, movies or cases that cover the microphone, microphone iSight or iPhone receiver.
  4. Clear all debris from the microphones or receiver iPhone. Refer to the manual of your device on the locations of the microphone.
  5. Restart your device.
  6. Make sure you have the latest version of iOS.

  If you have tried these steps and people still can't hear you on the phone or FaceTime calls or Siri does not hear your requests, contact Apple technical support.

  Best regards.