It will not start just swipe of fans no monitor

can not get to come monitor on the computer beeps three times and just seems to run the fan with no boot

Hello lanelewis,

Because your computer does not power it seems that the problem is related to hardware, I suggest you to contact your manufacturer to help you with this computer problem.

Tags: Windows

Similar Questions

  • Windows Vista will not start just goes to windows error recovery

    I have owned my computer a year and a half and had a lot of problems with it. I had 3 replaced hards and a motherboard.  my computer is turned off, then back on error windows approached and evry time I click an option, the computer shuts down then restarts his return to windows error recovery. I tried to put the recovery disk in, but it does nothing I also tried windows made it sit and tried the disk that is supposed to find the r but nothing will work. all of the suggestions.


    Recovery mode f11 does not work as well

    even in f8 f10 if I push the options it just stops and returns to the menu of this same

    I think that it is high time they gave you another to replace this one!

    You had such a race of bad luck, it would be more advantageous for them replace then keep "fixing" for you.

    Good luck with them and thank you for the reply.

    See you soon. Mick Murphy - Microsoft partner

  • Pavilion a6327uk will not start. Light output at the rear is enabled, all the work of 3 fans, but does not start.

    I have a Pavillion equipped a6327uk for vista 32 bit. I had similar problems before and remove all cables, hold the button to boot without the power connected, reconnect the and then turn on solves the problem. I suffered a blue screen, where I was told the computer was stop and spills of memory. Then I rebooted the computer froze and since then it will not start. I led on the power supply/process button cable about 30 times more than three days without success. The computer does not go to the HP logo screen, it just stops. Can anyone help with further action please.

    It could be almost anything that prevents your computer from starting to start to eliminate things.  If the computer under warranty?  If this is not the case, unplug everything including the power cord from your computer. Unplug the keyboard, monitor, mouse, readers flash and all other connected outside of the machine. Open the unit and unplug all the devices connected to the power supply except the motherboard.  Disconnect the hard drive cable and power supply data connection, disconnect the connection cable and power supply of the CD/DVD data, disconnect any drive card reader or floppy drive.  Therefore remains connected to the power supply should be taking 20/24 pin to the motherboard and 4 or 8 pin 12V for the cpu power cable.  Remove all cards that may be in the slots, as the video card, modem, network card (if they are not built in to edge of devices.) Just the cards that can be inserted into the slots.  Make sure all items are away from the computer and cannot cause a short circuit when you use power. Look at the motherboard and see if the capacitors were bulged or rounded top and maybe even a brown substance leaking from the top.  Check the video card as well for the same and a blocked fan who may have been not turn.  Test the power supply with a volt/ohm meter if you have one. If this is not the case, turn on the power and see if the fans are running and you get beeps.  If this isn't the case, hold the power button for about 5 seconds until the machine turns off.  Try only a chunk of memory at a time and in each of the slots.  If it starts to act normally, it is probably food.  If the sounds seem normal, unplug the power cable and install one at a time from the video card and connect the monitor to it. Plug the power cable from back in and start the machine.  If you have a video, keep disconnect power, adding another device such as the keyboard and the mouse until you arrive finally to your hard drive.  Do your last hard drive because there all your important data on it and you do not want to expose to all this test.

  • G5 will not start. LED light on. Fans before working.

    Early 2005 G5. running 10.5.8.

    G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.

    Sam

    Some of the fundamental things include the pram/clock battery replacement

    since they may be dead; then with a power failure, sometimes the Mac

    do not restart. Usual power management unit & reset NVRAM/PRAM are

    methods that sometimes also used as a troubleshooting measure.

    • Reset the Mac chip power management: (see SMU)

    http://www.thexlab.com/FAQs/resetpmchip.html

    • How to reset NVRAM-LANDAU on your Mac - Apple Support

    A hard reset can sometimes be used, where the power is disconnected

    the logic board and power removed from grill; Then push the Start button / stop.

    (But maybe not. Several PowerMac computers, I had, some people found this helpful)

    You may also remove and reposition cards and other items

    the inside of the case, to be sure they are connected properly. Be sure to not

    In short anything, due to the static load or residual power in the circuits.

    The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.

    can help to put it on again. Also sometimes the power supply has some faulty fans,

    circuits or capacitors, so they can be troublesome to repair or replace.

    Good luck in this case!

  • Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

    Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

    Sorted now

  • Computers button just flashes and the computer will not start

    Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

    Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

    Hey Bowers

    you get a splash screen on startup with an acer for hp dell etc. or the logo of the motherboard

    otherwise, it would seem that you have a hardware problem

    Contact the manufacturer of the computer or a local reputable computer repair workshop

    Walter, the time zone traveller

  • Just installed 14 elements, but the editor will not start. The notice appearing - Italian - is: Impossibile find it punto di ingresso della procedure nella libreria di special dinamico C:\WINDOWS\SYSTEM32\MSVCP110.dll _crtCreateSymbolicLinkW

    Just installed 14 elements, but the editor will not start. The notice appearing - Italian - is: Impossibile find it punto di ingresso della procedure nella libreria di special dinamico C:\WINDOWS\SYSTEM32\MSVCP110.dll _crtCreateSymbolicLinkW

    Hello

    Update your Redistributable Package VS.

    https://www.Microsoft.com/en-AU/Download/details.aspx?ID=30679

  • I'm stuck with a subscription that will not start on my operating system of El Capitan I downgraded to mavricks so I can use my full cc Adobe package (as is my work)... .it I won't launch the Mavericks either, as I just found out and I HAV

    I'm stuck with a subscription that will not start on my operating system of El Capitan I downgraded to mavricks so I can use my full cc Adobe package (as is my work)... .it will not launch the Mavericks either as I just discovered it and I have now lost a month trying to sort out... I tried to connect to Adobe to get on this forum and whenever I've done written password back @My not match... I had to change my password repeatedly to get.    What the hell is happening with Adobe... I have now spent a month subscription and had no use on a platform which has been fine on my previous order

    Hello

    Please see account Adobe ID and sign in troubleshooting for the problem of password incompatibility.

    Follow https://forums.adobe.com/thread/1830010 and https://forums.adobe.com/message/7826739 for the CC application does not launch.

    Hope that helps!

    Kind regards

    Sheena

  • My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

    My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

    Hi Joshua,.

    I think you found the turning wheel on the Adobe CC application.

    Please check the help below document:

    Does not open App | Wheels of progress turn continuously

    You can also view the nets below where this issue has been addressed:

    Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

    Creative Cloud Desktop App taped blue spinning wheel after update.

    Kind regards

    Sheena

  • Laptop will not start without the battery attached

    Hello

    I have a Hp pavilion dv6700 series (dv6840el) and just, it will not start without the battery attached.

    If I plug in the AC adapter, I get some computer activity (fan, noise of the dvd player and HD drive spins) for about 5 seconds, then shuts down.

    Once I plug the battery (which is dying, who need a replacement), the laptop starts fine.

    So my question is: what is a motherboard or a problem with the AC adapter?

    The AC adapter looks ok, however. But if I am considering buying a spare battery, I assure you that I have a new adapter as well.

    Thanks in advance.

    Hello

    Visit this link

    http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=61317&tmp_task=solveCategory&CC=US&DLC=en&lang=en&LC=en&Product=5081068&Query=dv7-6052ea&Tool=

    Good Luk

  • Recovery disk will not start on Satellite 1110

    I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.

    So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.

    I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.

    Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.

    Anyone here knows a remedy to this problem?

    (NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)

    I am in the United Kingdom, and is a UK machine if that makes a difference.

    Hello Micha

    Is this your ODD works properly with the operating system?

    I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.

  • Nine NB100 will not start

    Hello

    I just bought a Netbook NB100.
    After unpacking, I tried to turn it on, but it will not start

    When I put the charger in it gives a rattling sound very rapid for a few seconds and then stops, and also the sign of the battery flashes for 5 seconds and then turns off.
    When I press the button start nothing happens.

    Any help appreciated. So was lookiing forward to this

    Thank you

    Hello

    Remove the battery, connect the AC adapter and try to turn it ON.
    I didn't understand exactly what happened. But I hope you didn t turn it on for the first time without adapter.
    It is logical that the laptop must be put in power supply and after short time you can run it for the first time.

  • Equium L10 will not start

    Please help - my Equium L10 will not start.

    Power supply is OK. When the power is connected the orange battery light comes on. I press the power button the green power light turns on momentarily (literally a Flash), then both the Green and orange lights out with orange alone returning it on about 2 seconds later.

    Else does nothing - no fan activity, no hard disk, no activity of the screen activity, no other light - you get the picture!

    I tried the following:
    Removed battery and tried to start with AC power not only - no joy
    Removed AC power and I tried booting with battery only - no joy
    Barrette of RAM removed and reinstall - no joy

    Does anyone have ideas before considering a tech? Suggestions (with the exception where to paste!) would be welcome.

    Kind regards

    Gary C

    Hmm .He doesn't sound good. For me, it looks like a motherboard problem. It is maybe something wrong with electronic power to the Board of Directors of s. But not for sure.

    What you can do is to remove the battery and unplug the power adapter for a while.
    Wait about 20 minutes and connect the battery and adapter for the laptop. Then try turning on the laptop computer.
    If this does not help I recommend contact the ASP technician, because I don t think you will be able to know what's exactly wrong.

    So I hope that the technician can find the fault quickly and can solve this problem.

    Good luck

  • My Tecra S1 will NOT start!

    I have a Toshiba Tecra S1, that will not start. When powered on it gives me a repetitive beep code. The fan starts, only the power light come ON but the screen remains empty.

    The code goes like this: 2 Short emits a beep then one long beep, pause, then 3 short beeps.

    What is the problem with it and what can do?

    Hi Chris

    Of course, there is a hardware problem. Contact service partner in your country. They may include cela beep code. Unfortunately there is no public document on explanation of code.

  • iMac will not start. From sound and sometimes Apple, but no further details. How can I get?

    Just got an iMac and it will not start up.  I can get the sound start and, sometimes, the Apple logo, but it stops there.

    Have tried to use 'command-option-P-R' together. Have you tried "D".  Tried "control C".  Are there other possibilities that I could try?

    Install or reinstall OS X from scratch

    Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

    HD recovery start:

    Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

    Erase the drive:

    1. select in the main menu disk utility and click on the continue button.

    2. once the charges of THE select your boot volume (usually Macintosh HD) in the

    list on the left. Click on the Erase tab in the main window of THE.

    3. set the type of format Mac OS extended (journaled). If necessary, click

    Security and button all the option data from scratch in a single pass. Click

    the clear button and wait until the process is complete.

    4 leave FROM and return to the main menu.

    Reinstall OS X: Select reinstall OS X and click on the install button.

    Note : You will need an active Internet connection. I suggest to use Ethernet if possible

    because it is three times faster than wireless.

    This should install the version of Mac OS X that you had installed it.

    If this does not work then your hard drive has failed and must be replaced. Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

Maybe you are looking for

  • Flag: start

    I have trouble turning on computer. I have to switch up to 4 times, until the computer starts. Usually nothing happens, so I press the switch to stop and start again and again, usually up to four times Advice please solve this problem?

  • Visual web developer 2010 express record button is disabled

    Hi, the button "Sign up now" is disabled. What's wrong? Help, please

  • HP touchpad + keyboard

    Hello I recently bought a HP DV6-1114sa, a boring, is that while I'm typing I can't move my mouse, it is particularly annoying in the game, is it possible to disable this feature? Thank you Andrew

  • AMD radeon hd m 7470

    I have a HP Pavillion Dm4-3011TX (bat Special Edition). My brother plays on my computer, sometimes, he plays this game called minecraft but after 30 seconds of play, the screen goes white and a pop-up message boils down to the bottem saying "AMD driv

  • How can I add *.jar to the existing bb project?

    Hello How can I add *.jar to my existing bb project and use it as a library? concerning