Its control on Inspiron 2330 with HDMI input

Similar Questions

• Dell inspiron one a HDMI input with output usb audio

  Hi, I recently bought a dell inspiron one 2330 and some of my blu - ray high-fidelity discs do not work very well at all. :(un peu déçu car c'était la principale raison que je l'ai acheté.)

  So I tried my blu - ray player in the HDMI port, but now it only uses the computer speakers not my B & W Zeppelin air via the USB input.

  If advice how to fix the blu - ray glitch player that seems to start and stop on most of my records or produce audio output to HDMI input to the USB port would be much appreciated

  Thanks in advance.

  Which seems to indicate a problem with your video card. The cooling works may not properly. I would contact Dell on the replacement of it. This may explain the poor video performance.

• How to control a Mac mini with HDMI ports fries and lightning? (The rest is ok)

  Recently, a lightning strike fried video output (HDMI and lightning) ports on my Mac Mini end of 2012. As far as I know, the rest of the machine works fine. It's just blind. I can't have everyone working on this, but I don't want to throw a perfectly (well, almost perfectly) computer works.

  If I can get a control over the Mac Mini for a few days, I could set up as a dedicated time Machine or maybe even an iTunes or media Server. How can I achieve this?

  Configure the screen sharing on the Mac.

  To do this, you must have another recent Mac.

  You can start the problem Mac in target disk mode, connect the two Mac by FireWire or Thunderbolt, boot the Mac problem with button down T, boot the first Mac since the Mac HD problem and sharing Setup screen

  http://www.macissues.com/2014/05/07/how-to-set-up-and-use-screen-sharing-in-OS-x /.

  http://www.TechRadar.com/us/news/computing/Apple/how-to-use-screen-sharing-in-Ma c-os-x-1296285

  Alternatively, you can take the drive out of the Mac problem and start another Mac that and configure sharing screen.

  You can also get a USB video card and put in place by the target disk mode or by removing the similar disk for screen sharing

• Satellite A300-1OM - no sound on TV with HDMI

  I have a Toshiba Satellite A300 1OM and also a HD in Toshiba TV with HDMI input ports.

  I recently bought a HDMI cable to HDMI and attached the laptop to the tv and turned the TV to HDMI channel, and the cell phone confirmed making the sound "new device attached".

  However, when I try to use the Fn + F5 and output to the tv, nothing happens. When I choose to use the TV as an external monitor to the tv shows the external display, but only covers the center of the TV, just a little larger than my screen laptop, instead of the full screen, as I had hoped. The sound also remained on the laptop instead of my tv speakers.

  Then I tried the "HDMI output" software that came with the laptop computer, and only got the message "it is only effective when the PC is connected to a TV set that supports HDMI control via the HDMI cable.

  Finally, I tried the graphics options to click with the right button on the desktop and choosing to watch out, and then using the graphic properties that I managed to increase the resolution on TV, until he was almost the entire screen, but not entirely and again the sound only came out of the laptop.

  I'm hoping to be able to watch video files from my laptop HD, but it seems that the video output on my TV is always one notebook quality rather than the HD as I had hoped... I tried to watch "Lost.S05E11.720p.HDTV.x 264 - CTU.mkv" once I have wouldn't finally gone out my laptop to HD TV to a nearly full screen size, but does not recognize the difference between the video on TV and laptop.

  Can anyone help? I have read several other similar posts, I checked the BIOS and is enabled in the HDMI display section, but still could not resolve my problem.

  Thank you!

  Hello

  > I hope to be able to watch my laptop HD video files, but it seems that the video output on my TV is always only quality rather than HD specification
  > does not recognize the difference between the video on TV and laptop.

  Do you know what that means HD quality?
  HD TV supports a maximum resolution of 1280 × 720 px and full HD means that the TV would be able to show HD movies using the resolution of 1920 × 1080.
  A simple old TV supports a resolution of 768 x 576.

  Each screen of the laptop is able to show HD videos in HD quality because the screen supports the same or greater resolution!
  So you will not notice any difference on laptop or HD TV HD quality video game!

  In addition the sound does not come through the speakers of the TV because you didn t, choose the HDMI port as the default audio output (device).

  Check this step by step instruction:
  Click Start
  Parameters
  Control Panel
  Material and audio
  Audio/digital output device (HDMI)
  Click the set as default

• His use of the AIO Inspiron One HDMI input jack 2330?

  Greetings,

  I'm looking at the computer Inspiron One of AIO 2330 with the Core i5 processor. I understand that this computer comes with an HDMI port

  I can't seem to find information on what I could use this port for so I was wondering if someone could enlighten me. Specifically, I was hoping that he could've able to do the following. My TV provider digital tuner box using HDMI to connect to the TV. I was wondering if I would be able to snag one of the digital tuner until the HDMI in port on the computer and use it as a monitor for the tuner box?

  Thank you

  Gord

  Hey, Gord

  Yes, you should be able to do. Let me mention that I did on a XPS One 2720 system and the video was nice connecting the my set - top box HDMI signal. However, the audio did not work. In theory the HDMI can carry video and audio signals, so I don't know what the problem was. But the video part worked fine.

• External speakers do not work with HDMI connected Inspiron N7110

  I recently got a new monitor with no speakers.  The monitor is connected with HDMI.  When the HDMI cable is connected, I get no sound from internal or external speakers.  Since the monitor was not pregnant, I get no sound with it connected.  Is there a way to fix this?

  Thank you.

  Dwight

  Try going to start > Control Panel > Sound > tab reading "HDMI" device not by default Make - do pregnant be the default.

• Inputs a / v on dell inspiron 2305 with TV card

  I have an Inspiron 2305 with A / V inputs. It has a mini Aver Media A336 hybrid ATSC/QAM.  Now, I have not bypassed my antenna currently running on the computer to tune tv channels, still - but device manager tells me the card is installed and working properly.  My problem is I want to start a VCR in the computer and I guess the input jacks travel card and need to convert analog to digital.  The problem is that nothing appears as input device when I do that.  Someone has already tried to convert VHS digital directly by the entries has / v?  Any help would be much appreciated - thanks!

  Hi Spearko520,

  If you are connected to a RCA (l/r audio and composite) taken VCR, the VCR will not appear as a device. What you need to do is open Windows Media Center, and then you should be able to see the signal from your VCR.

• Don't boot to desktop-Boot computer ups always come with "no input signal" for monitor

  Thanks for the research on this issue.  So first of all, he could start after a few attempts in the end goes to the blue screen error at approx. 5 min. I started this path several times that in "safe mode with network" to try the many suggestions of repair for two days. " At this point, it's freezing just at "windows is loading files", but probably will go to blue screen error. Boot ups always come with "no input signal" for the monitor and signal switching in the Help menu for 5 min periods I've mentioned and then fails or "monitor going to sleep" occurs.

  The error messages rec'vd: corrupted image, corrupted file and header file check sum does not match the sum of computer control. The recommendations of the screen blue: disable the BIOS memory, any material current or drivers and check disk space.

  Some tent to fix: memory diagnostics and it showed 'no problem', checked monitor on another computer and it works, in a session of 5 min a download to 'fix' Microsoft via a USB problem like "search of windows crashes" but was 'unable to set', a few other attempts would show the "windows installer has stopped working" preventing any action.

  At the present time, am unable to start even with advanced at F8 options.  It's HP Pavilion 10/2007, with the help of HP. Its on a wireless network with a netbook, Blu - ray, occasionally a cell phone that works on windows live but none presents as a device.

  Hello

  ·        You did changes to the computer before the show?

  ·        What is the exact error message that you receive?

  Method 1: Remove the external devices except the keyboard and mouse and try to restart the computer in safe mode and check if you can start inside.

  If you are able to boot into safe mode then try a restore of the system it and check if it helps solve the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2: I suggest you do a system recovery options system restore and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3: If the system restore does not help then do a startup repair and check if this solves the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• Inspiron 3847 Office HDMI not wake up monitor

  Just bought a desktop computer Inspiron 3847 with integrated graphics to assess if we bring to our society.  Connected to an ASUS HDMI monitor and have no video.  Could not understand what was going on so connected via VGA instead and it worked as expected.  Ultimately determined that the Inspiron does not send a signal of alarm for the monitor.  Tried the monitor on a different model computer and it worked correctly.  Tried another cable with the monitor and the Inspiron HDMI but no change.  So, it means using a HDMI on the Inspiron 3847 monitor to turn on the monitor after starting the computer for it to connect via HDMI.  Checked to see if there was a BIOS update, but I have the version 2, which was recently published.  Any suggestions on how to make the Inspiron wake up the monitor when the system is powered or exit the mode 'sleep'?

  I had the same problem, but fortunately got better help Dell Cathaleen did.  I just bought an Inspiron 3847 of Dell desktop computer and also bought a new monitor ASUS from amazon.  Worked well with the VGA cable, but did not work with the HDMI cable.  The solution is simple, just do it once and you'll be ready to go. Basically, you need turn on the input screen while it is on the VGA HDMI cable. Then remove the VGA cable and install the HDMI cable.  Here's how: 1. hang your desktop on the screen with the VGA cable. 2. press "menu" on the monitor ASUS Punch.  3 scroll to 'Input Select' with the 'Down' button on the screen (just to the left of the menu button). 4 drill the menu button to switch to the list of the 5 cables.  Scroll down to select HDMI. 5. remove the VGA cable and install the HDMI cable.

• Apple TV is no longer active in order to correct the HDMI input

  Before the last gen 4 apple tv update, when the apple tv was turned on, the TV should be enabled (we have an older Sony Bravia) and passed to the HDMI input used by the apple TV. With the latest version of apple tv, the TV is turned on, you hear a click (as if the apple tv has been trying to pass the HDMI inputs) but used the HDMI input on the last remains. The HDMI input for the apple tv is never bound by the apple tv.

  Everyone has noticed this problem with the latest update to apple tv? I missed a configurable option that must be specified for the behavior of earlier versions of gen 4?

  Apple: Please restore the nice feature that existed before the last update to apple tv.

  Works fine on my system. How HDMI CEC depends on television, check to see if yours is an update. This is a user forum, you're not address Apple here.

• Qosmio G50-129 no sound with HDMI connection

  Hello.

  I have a Quosmio G50-129. Recently, I tried plugging it into my Sony Bravia LCD TV via the HDMI connection.
  I have video output but there is no sound on the TV.

  I tried to set the HDMI as audio device as default and the sound level meter in the sound properties panel appears to show activity, but nothing comes out.

  Can anyone help?

  Hello

  I m not Qosmio G50 owner, I only have the small F50, but it must be identical to yours I think. So first of all, I must say that I never had a problem with the HDMI connection. Everything has worked perfectly since I used the HDMI connection, the first time

  In any case, if you connect your laptop to an external monitor or TV using the HDMI connection, connect the cable first. After this power on the TV and select the HDMI input right channel. Then go on your laptop and if you press FN + F5, you can change between the different options.

  Normally the HDMI output is automatically set as the default audio device, not to follow these workarounds with good screenshots:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

• Toshiba 32TL838: flicker after fw upgraded in the menus, using HDMI input

  Hello

  yesterday I updated firmware of my 32TL838 to version 6.4.0Y.1 / 94.6.27.8 using the upgrade feature network.

  After the upgrade, I reset the TV to start again with the factory settings.

  During the quick installation after the reset, I noticed a very bad video quality. The entire image flickered, had a ghost effect and looked at interlaced. The menus were almost illegible.

  Once the installation is complete, the TV switched TV (cable DTV) normal mode and at least the TV picture looked quite normal. While the input CABLE is selected, I can also open menus as before, they are displayed correctly.

  But as soon as I switch to the HDMI input, the image becomes nuts once again, just like during the initial installation, including recoveries of TV menu. Sometimes it becomes stable for maybe 30 seconds, but then he is paralyzed again.

  A few words about my setup: TV uses only input HDMI 1 and the cable entry, nothing else is connected.
  Links to HDMI input to a receiver Onkyo TX - SR508 AV which is powered by a Fantec 3DS4600 media player and the Blu - Ray BDP - S373 player.

  Because I expect the question of what-to-your-HDMI-wiring, I traded the HDMI cables but as expected which has not helped at all.

  At least, I seem to be successful by bypassing the problem when you use the Fantec drive.

  Before I updated the firmware, I was able to use the drive with 1080 p/60 Hz and the player has been installed as a result.

  Now I switched to 1080 p / 50 Hz, and the video image seems OK again. (However, I made a short test and as I said, sometimes_
  the image is OK for a short period).

  Unfortunately my BluRay player has no menu to change the frequency, so I watch BluRay or online services, the player offers, is impossible.

  So, what can I do now? A downgrade of firmware (if possible) would be a quick temporary workaround I could accept. But medium-term I'm expecting Toshiba to restore functionality that they promoted and for which I paid.
  (Youtube stopped working with the old firmware and it seems that 1080 p/60 Hz no longer works with the latest firmware).

  Anyone know how to downgrade the firmware using a USB? I already downloaded the previuos version tl838_853886.bin but I do not have a nail how (and if) it can be installed.

  Thanks for your advice
  BELEKTRO

  Hello

  As far as I know the isn t possible downgrade firmware.

  But you said that you noticed this problem by using an external device connected to the HDMI 1 port.
  As far as I know the Toshiba 32TL838 supports 4 HDMI ports.
  I recommend you to check all of the 4 HDMI ports as well as to check all device configuration options.

  Check for example the rate of active movement + option available.
  This option allows to improve the rate of cooling of a TV

• HP PAVILION SLIMLINE S3370.UK: update ATI 2400HD to one with HDMI graphics card

  Looking for some advice - I have this HP PAVILLION S3370 with this 2400HD ATI graphics card machine

  The reason why I'm looking to upgrade the card is simply for HDMI support. I have bought converters and VGA splitters but had problems with resolutions where I'd get a display on a screen and a message put on the other, so I thought that I should just upgrade the card to one that has two vga and a HDMI output in this way I can project to the second screen and with a card with the sopport software update I should be able to adapt to the screen with scaling options - as I can on my other machine - and yet always use the computer screen when I want to sit at my desk.

  The problem I have is the technical terms of the cards. I uderstand that due to having a HP Slimline I need a low profile & PCI Express x 16 card but newer cards make no mention of DDR2 SDRAM - and instead, I know GDDR3 - I'm asuming it is just the memory of the card use - type, but that would be coimpatable with the installation of my machine?

  For example this map would be a suitable replacement? EVGA NVIDIA GT 610 Graphics Card - 1 GB If Yes can you contact why. If this is not suitable could make you alternative suggestions - thank you.

  I apologize for the niavity of this issue - but it's been years since I have been embarrassed to have to upgrade graphics cards and I forgot the more I find myself with. I am based in the United Kingdom and the machine itself is running Windows 10 - the current graphics card manages the Sturmovik game Sim plane no problem and while I want to really just support HDMI for streaming movies I don't want to lose my support in game.

  Thanks for reading and checking links - we appreciate it.

  Hello:

  I think you should be able to squeak by with this card and derisory of your PC power supply 160W.

  The AMD Radeon attracts a maximum of about 20 Watts and the GT610 around 29 Watts.  IMO, 9 Watts is not that big of a difference to blow your PC power.

  I see that it comes with low profile brackets, so there is no problem with this arrangement, etc.

  You're right about the memory.  That concern me too much back in the day, that the memory graphics specification did not spec PC's memory.  Graphics memory is independent of the PC's memory, and there is no conflict.

  The only thing I don't know... but easy enough to fix.

  The PC being produced in 2007 may have a BIOS that does not include how video cards with HDMI ports work regarding audio.

  On these old PC several times when you install a video card with HDMI output, the PC think that not only you have installed a video card, but that you have also installed a sound card (because of the HD audio chip on the video card).

  Thus, the BIOS only disables the video edge, it also disables the audio system too.

  So, after installing the video card and drivers, if your integrated sound card is missing, restart the PC, go into the BIOS, look for the audio setting on Board (it cannot exist without first adding the video card, so there may be no use in looking for it now).  You can watch now of course, but do not be alarmed if it does not exist.

  Audio setting will be set to auto or off.

  Change the active setting. Save the setting here where you made the change, and again when you exit the BIOS.

  After reboot and return to Windows, integrated audio system needs to be restored and the HDMI audio works if HDMI cable connection is detected.

  Another reminder... before install you your new video card, make sure that you uninstall the current drivers.

  To do this, go to Device Manager, click to expand the category of device display cards, do a right-click on the map of chart amd radeon HD 2400 that there are listed, select uninstall, select uninstall driver.

  Do not restart the PC you are prompted.

  Go to the menu programs in the Control Panel, then uninstall all current AMD Catalyst software.

  Once this is done, stop, disconnect the PC and remove and replace the video card in your PC.

• How to maximize a Panel and its controls?

  I put the group attribute in the "Other attributes" section of the edit panel dialog box.

  When the Panel is maximized, its controls can intensify, so I had a very discordant interface.

  I want to know if there is a way to get an interface coordinated after optimization?

  Thank you.

  CVI panels depending on the setting screen has been discussed repeatedly in the forums: is one of the latest discussions.

  I agree with you that a resize raw gives poor results so I always wonder what element of the Group of experts needs to be resized and how much. Personally I do not rely on automatic resizing: I use the separator way to customize the appearance of the Panel to the screen size, but I normally do not enlarge the buttons and text.

• Computer connection portable tv with HDMI connection.

  I have connected my new laptop to my new 22 '' HDTV with a new HDMI cable in order to be able to use the TV as a monitor for my laptop. I went in my entry on the TV and changed my HDMI input.  Got a great picture on my TV from my office computers but the image was too big for the TV screen which cut about half an inch of the image on all four sides.  I went in my display settings on my laptop and changed my screen resolution for each of the seven different sizes listed, but they were still too large or too small.  Also, I get no sound with this connection. I thought that all the cables HDMI carries audio and video.  What did I miss?  What have I done wrong? Would appreciate any help on this problem

  Thank you

  Hello geno728,
  This thread has been created in the Microsoft Feedback forum. the moderation of Microsoft team has moved this thread to the hardware and drivers Forum.