its DTS

Similar Questions

• Its DTS can't find my headphone

  I have a problem with the sound dts, it randomly allows to switch between the headset and speakers output and when it is on the output speaksers the quality of the sound is terrible. When I have disbable dts audio I have no problem but then is not terrible sound quality.

  Hello

  The sound of the Studio DTS improves the sound quality (if his permit)

  You can set this improved sound internal speaker, 1 external (helmet) or external 2 (if connected external speakers)

  For each of the three modes, you can configure the sound surround, max volume and bass amplification.

  So according to the output device audio you use, you should choose the right DTS Studio Sound output mode.

• Satego X 200-not of its DTS using a HDMI cable

  I use my Satego X 200 as a Mediacenter and send audio DTS on the HDMI output for the audio/video receiver but no sound.
  Dolby Digital is ok. What is the problem?

  Are you sure you can do this and it should work?

• Its DTS no longer works after upgrade to win 10

  Since the upgrade of windows 8.1 for windows 10 my DTS sound has stopped working?

  Check this thread:
  https://Forum.Toshiba.EU/showthread.php?83818

• Satellite C50 - A - Logitech - serious silent subwoofer speaker system

  Hello

  I have a brand new Toshiba Satellite A - 19 t C50. I have a Logitech speaker system that produces a pleasant sound. When I plug it into the new laptop, the subwoofer doesn't produce a very quiet sound, leaving an overall metal sound. The speakers work perfectly with another laptop.

  Is that what I can do to change the sound levels or the sound card is at fault?

  Thank you

  If you connect the external speakers to the laptop, you should also check the settings of volume and level. Usually, you can do this in Control Panel-> sound-> playback.

  As far as I know, that you can also find sound additional application called DTS® Sound & DTS Studio sound that is preinstalled on your laptop

  Its DTS Studio is a suite of improvement audio premium which uses the revolutionary audio technology to provide the most impressive and the most realistic listening experience ever offered for a two speaker playback environment.
  To access this utility, click on:
  Office-> Office help (in the task bar)-> Media Entertainment & -> DTS Studio Sound

  You can also find the DTS sound (he delivers an immersive surround sound with deep dialogue, rich bass and crystal clear). Click
  Office-> Office help (in the task bar)-> multimedia animation & -> his DTS

  Check also.

• Satellite L50-B943 - Audio problem Jack Quality

  So, I recently used this laptop and every time I plug in my headphones quality goes big and hard at something just plain bad.

  I tried to use my headphones on other devices and they work fine.
  This is the first time I met this problem as well.

  Your responses are much appreciated. Thank you!

  Hello

  The laptop supports DTS® sound.
  Its DTS Studio is a suite of enrichment premium sound available on some Toshiba laptops, which provides a sound immersive surround, outstanding bass reproduction, improved dialogue and smart volume Equalization and maximization of all multimedia content.

  But to get the right sound, that you must change the DTS from the inside to the outside.
  Please be aware of this!

• Satellite L70 - no sound from speakers but headphones work well

  Hello

  I have a sound problem with my computer (satellite 70 L)
  I tried everything but nothing to do, no audio output, but plugging the headphones into the audio port reinstall his works well, so I uninstall Conexant, even for its dts but its still doesn't work does not,

  Thank you

  In my view, the symptoms of laptop are clear enough: he does not resemble his driver or system problem because the sound seems to use the headset.

  I think that the internal speakers are defective. It seems strange to me that the two speakers have begun to malfunction at the same time, but this problem may occur.

  But before you contact the authorized Toshiba maintainer to fix, I would recommend you to recover the laptop just to be sure that this problem is not related to the failure of the system/software to 100%.

• No sound on the video file problem

  original title; sound playback problem

  I play a Matroska video file its DTS.x264 I have a very good picture but no sound! If I use another player that I get sound but terrible video, media player works fine with all other types of video files! How can I sort this please

  Hello
   
  1 - is this problem come just playing one Matroska file or all those files?
   
  To read Matroska x 264 files in a Windows computer, you will need to appropriate decoders. Your computer does not have appropriate decoders or decoders you have might not work properly.
   
  I suggest you go through the information in the following article and see if that helps you:
   
  Matroska - reading Windows
  http://www.Matroska.org/technical/guides/playback/Windows/index.html
   
  It will be useful.

• Yet its CS5.1 and for BluRay DTS: has there been any success

  I have not updated to the latest version (cannot afford right now), but I would really like to know if there have been improvements in the treatment of DTS audio file.

  In CS5 you can NOT create a BluRay disc with dts audio. StreamTools (using DTS MasterAudioSuite) are not accepted at all and the .cpt files are accepted, but cannot be used for DVD projects (trying to create a comic book project with .cpt you can an invalid file for the BluRay error).

  If something has changed in the newer version?

  I'd be really curious to know about it.

  Thanks in advance

  Hi all.

  First of all, the suite MAS DTS - HD in fact quite legal bitstreams for Blu - Ray, DVD and CD DTS as well as digital distribution.

  If still it becomes bad, and also other windows applications are similarly mistaken while DoStudio & Scenarist accept it, then there must be a reason why.

  The good news is that CS6 now supports DTS - HD Master Audio in passthrough mode.

• Satellite A-L50-19N - audio DTS does not work after update of Windows 10

  It is the most important thing in the drivers of toshiba, because without this driver, the sound is terrible...

  And now after the upgrade to 1511 he doesn't...

  I reinstalled IDT AUDIO latest driver is for 8.1 (2015 jan) and DTS Audio, which is for WIndows 10, but it does not work, I can it enable / disable EQs change, but nothing will change...
  
  WINDOWS 10 (1511)
  TOSHIBA SATELLITE L-50-A-19N

  DTS: 6.10.6491.0
  IDT: 1.2.41.0
  

  I fixed that, I updated its IDT Manager devices, and now Audio DTS driver works...

• I can't open my control panel Audio DTS

  I upgraded my pc to win 8.1.

  Sweet OS, but not the interm of the drivers...

  before I wasn't able to make adjustments in my control panel Audio DTS

  so I have seachered for an answer and there was a similar to him, he said to uninstall and reinstall the sound drivers.

  As said, I did.

  After the restart I tried to open the Audio Panel. It has not happened... tried to look for it online for installation or the software update, has not quite everything.

  Please help me with this.

  I tried to troubleshoot issues in windows and he showed a pilot unknown/material:

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00\4 & 1937D2A1 & 0 & 01E0

  don't know if that's the problem...

  HP Pavilion 15-e015tx (E3B55PA) PC notebook

  Nevermind guys, HP support Assistant gave me an update and its working fine now

• Windows Media Center is unable to output Dolby Digital/DTS via SPDIF... only stereo PCM is sent

  Hello

  I recently bought a desktop computer HP Pavilion with Vista Home Premium (64 bit) 5150t.  The PC comes with a TV tuner and it works well with Media Center except that it cannot output Dolby Digital (or the other program on the air with JJ or DVDs of films that have a DD) outside of my A / V receiver.

  My Board has Realtek HD Audio and I activated the digital (SPDIF) output in its program.  I put the "Properties" of the digital output in support of * TWO * DTS and Dolby Digital encoding.  When I press the 'Test' button for either format, outside A / V receiver correctly recognizes the format, so the problem is not with my receiver.

  Read forums and online help notes, I strongly suspect that the codec MPEG-2 by default for Windows Media Center is not configured correctly for cross DD or DTS - it somehow always stereo down-Mix before sending to SPDIF.  Could you tell me how to check and change codec setting?  Thank you!

  -Colin

  Hi Chow Ho.
   
  This problem occurs because the DirectShow component and audio decoder MPEG2 in Windows Vista does not correctly support DTS pass through S/PDIF or HDMI.
   
  To work around this problem, click to select the box Audio DTS and Dolby Digital check box in the SPDIF Out properties dialog box or the dialog box Properties of HDMI Out .
   
  You can also check out the link below for more information:
   
  http://support.Microsoft.com/kb/940685
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Fast forward video its exception throw year error has occurred trying to play media.

  My problem is that if I'm fast video transfer its exception throw year error has occurred trying to play media.

   

  CODE

   

    public MyScreen()
        {
      try {
           setTitle("MyTitle");
  
          Invocation invocation = new Invocation("http://dl.dropboxusercontent.com/u/17458564/Nueva%20carpeta/Video/lovingyou.mp4;interface=wifi");
          // Get the Registry object using the class name of the application
          Registry _registry=Registry.getRegistry(Application.getApplication().getClass().getName());
          //Invoke the content handler.
          _registry.invoke(invocation);
      } catch (IOException e){
      }}Any solution will be appreciated Thanks
  
  
  

   

  Hi @tej,

  I'm assuming that you actually see the core MediaPlayer card app transition when you perform this invocation. But if this is the case, you simply reference to a * looking to come * operation from the progress bar? (i.e. component UI slider). Because the only way you can actually get a * operation forward fast * is increasing reading speek, through the Cascades MediaPlayer API or mm-renderer C API; links to documentation for the MediaPlayer card above, there is no way to specify the quick delivery.

  Now, assuming that your * search * operationg is a failure, it could even be on how Dropbox is expected or with HTTP calls. A few things to consider (the URL you pasted is not accessible to me, at least my network to work here):

  (1) the same video file works with the search when you already downloaded on your phone (which is pointing to a local path instead)?

  (2) the same Dropbox URL works perfectly well with the streaming/looking for a browser based player? (for example VLC client on the default player on Google Chrome or Firefox)

  For example, here's a .mp4 from a video podcast site: http://dts.podtrac.com/redirect.mp4/twit.cachefly.net/video/tnt/tnt0920/tnt0920_h264b_640x368_256.mp...

  Let us know what you think / search.

  See you soon,.
  Rashid

  Applications development consultant | Relationships with developers

  BlackBerry @surashid

• DTS and independent discs.

  Global: How activate DTS move independent disks on vSphere 6.x device

  -For some reason, we create all the VM with a persistent independent drive.

  -We would like to 'solidarity hard disks.

  In this case StorageDRS is unable to do its job, create a recommendation and migrate disks of one volume to another (all VM contains DTS unable to move independent labels and independent labels).

  There is a cheat for vSphere 5.x - "a vpxd.cfg option sdrs.disableSDRSonIndependentDisk. "When specified and set to false, storage DRS will move to independent disks" (q) DTS Interview Questions | Virtual reality

  > Note: this only works for independent non-shared drives.

  Yes, it's ok, we don't have all the independent shared disks.

  But the file is modified in vSphere 6.x vpxd.cfg format device, now it is of type xml.

  And I still can't find how we can enable this option.

  Help, please.

  OK, after a bunch of tests, I found, the buildings should work.

  Must insert in to before /etc/vmware-vpx/vpxd.cfg "" following lines:

  fake

  and then restart the service vmware-vpxd (beware, you have lost connection to vcenter in this time).

  At least before I had in /var/log/vmware/vpxd/vpxd.log:

  2016 05-11 T 15: 10:41.449Z of information vpxd [7F86C02C2700] [Originator@6876 sub = drmLogger = task-internal-2-73cbac2a-d5 opID] CreateDrmDisksForVm: device for ${name} VM vm 2002 DTS OFF for independent

  for each virtual machine, run each DTS.

• . Not legal for blu-ray/dvd DTS! Help, please

  First of all, I would like to thank in advance anyone who can help me solve this problem.  I've been looking through tutorials, google help on this, and nothing helps, I was not able to get .dts to burn to dvd or blu - ray.  I have all my goods in order and when its time to build the project to dvd/blu-ray all him transcode video fine, but it keeps telling me "not legal .dts to blu - ray" or "not legal .dts to dvd" in other words, all videos are in line, not the sound.

  Can someone help me please?  Y at - there a step I'm missing?  Why we say that it is not legal, when documentation indicates that still supports dts?

  Here are my computer specs:

  Card mother MSI 7366

  Vista SP2 x 64-4 G RAM

  (2) burners Panasonic MLT - BD SW 5584 Blu - ray

  Thank you

  Halfpint1210

  Halfpint,

  I used SDRS (mainly based on input from Neil Wilkes in those and other threads) without any problem.

  I export the PrPro Audio such as WMA with all six streams included. AMM have been transported to Audition for any additional changes, then exported hearing as six discrete PCM/WAV files. In the SurCode encoder, I encode to one. CPT and Import_As_Asset file in Encore. This file is then placed on the Timeline as an additional Audio track, which is accessible via a Menu. Most of the set-top will players also this additional Audio track via the Audio button, but not all. I also usually add some instructions on this selection Menu Audio, or as a title at the end of a first Clip to play, so the user knows that there are choices.

  Good luck and attention to all of the comments from Neil Wilkes. There are also a few other discussions on DTS, where Jeff Bellune both Neil Wilkes answered specific questions of mine on the subject. Some of them probably come back before even the previous forum. I have found no, and the little that I found (Google), had links to Adobe. I'm sorry.

  Hunt