its like 700-074

Similar Questions

• HP Envy 700-074 Graphics Card problem Windows 8

  Greetings,

  I recently bought the HP ENVY 700-074 (http://http://h10025.www1.hp.com/ewfrf/wc/product?cc=us & dlc = in & lang = to & lc = in & product = 5371495).

  Initial setup went fine without any problem.  I replaced the power supply so that I could add the graphics card from my old computer.  The power supply and graphics card worked perfectly for my old computer.  Feeding is a BFG Tech GX 550 watt modular power supply series.  The graphics card, I have installed is the Nvidia 560ti.

  The problem is that, when I start the computer, my screen goes to sleep (as there is no signal) until the login Windows 8 screen lights up. At this time, my screen lights up and it is normally.  However, if updates or restarts the computer, the screen turns off again and he returned sometimes when loading the desktop computer.  I tried to get into the BIOS to see if I could disable the onboard graphics, but I have been unable to access BIOS because I don't see anything on the screen during startup.  I removed the Nvidia card and returned to the use of the integrated graphics card and everything is back to normal.  I managed to enter the BIOS at the time here, but I don't see any possibility to disable the integrated graphics card or use the PCIe as main display (unless I missed something).

  I also noticed that Windows 8 shows I have 2 screens installed when only 1 is installed physiclaly.  My HP (HP 2009 m) monitor is listed in Monitor 2 and I initially had to go through the windows to get my HP Monitor to display the entire desktop (as it origionally extended from the start, the desktop computer).  However, number of monitor 1 is listed as monitor of generic cards.  Thinking that the computer used the non-existent monitor like main display when starting, I deleted the generic monitor than to have to reinstall windows.  I also tried to disable, but the problem persists.

  I guess that there is a conflict between the integrated graphics card and the Nvidia card.  However, I assumed that the edge will be disabled automatically after inserting a card into the PCIe slot as the integrated graphics card watch is no longer under device mananger.

  Hello:

  Have you changed the settings of the BIOS 2 (required) before installing the video card no HP?

  If this isn't the case, please read the info on the link below.

  http://support.HP.com/us-en/document/c03653200

• IAM thinking without downgrading my desire to hp 700-074 to windows 7 is worthy

  IAM thinking without downgrading my want to hp for windows 7 is it worthy and just in case I want to dwongrade in any case I want the drivers that need me so my desire to hp 700-074 to work properly or the dirvers it comes with compatible with windows 7

  WARNING *.

  HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You can buy a copy of Windows with a Microsoft COA and a Windows product key is valid.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in page 'Configuration of the BIOS start-up secured' in the settings below, until you try to install Windows 7.

  

  or

  

  Also, as the hard disk can be partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" or "UEFI - USB Flash drive" options in the boot menu "F9". If "UEFI - CD/DVD drive", "UEFI - USB Flash drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  Most of the Windows 7 driver for the CTO page drivers HP ENVY Phoenix 810-135qe desktop PC should run on your computer. If you have missing or unknown devices after installing the drivers, please post the "Hardware ID" Device Manager for devices as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• NVIDIA gtx 550 ti, in envy hp 700-074, win 8

  I installed the graphics card that worked in my hp Pavilion in my hp envy 700-074.  The computer starts up fine and recognizes the card, how it works, but when I start playing games, the computer stops and says that there was an unexpected error.  It happens that after I have started playing a game for a few minutes.  Is this sound like something that I can fix it, or should I get a new card?

  Hello

  Play the game offline and see if the problem occurs.

  Run diagnostics, perhaps 5-10 passes, and ensure that the basic material is stable.

  There is aBIOS update releasedfor your PC. You might consider that give a try.

  If you think that the graphics card is a possible problem, then remove the card and use the built-in GPS and see if your question still occurs. You may need to reduce the game about settings.

• HP ENVY 700-074: How do the BIOS on my computer?

  My computer works fine. But I would like to know which key to press while the operating system is coming to get the BIOS. I have a HP 700-074 running Windows 10 (64-bit). The processor is an Intel core i5-4430. This computer was purchased in July 2013.

  Hello

  Typing away, as soon as you turn to go to the Start Menu - from here to the ESC key, you can press f10 to open the Bios Menu.

  Kind regards

  DP - K

• HP Envy 700-074 model BIOS corruption, or bug, etc.

  Hello

  My name is Patrick Barker, and I'm an analyst of the blue screen of death core Dump. During the last week, I ran into two users having a HP Envy 700-074 computer and experience the same exact bug check. The first time I met such a bug check, I imagined that the user may have simply received a system with a bad BIOS, things like this happen in computers all the time. Well, the user contacted HP and replaced it with the exact same model course, and he had the same problem.

  Right at that time, I discovered another user knows exactly the same problem as the previous user. With a consistency like this, I wonder if there is a corruption of the BIOS and/or the bug associated with this particular model?

  What is happening is that there is a frequency of verification of bug ACPI_BIOS_ERROR (a5) .

  This bug check indicates that the BIOS Advanced Configuration and Power Interface (ACPI) computer is not fully compliant with the ACPI specification.

  Error checking A5, {1000, 0, 80001000, 25}

  The 1st setting has always been far 1000.

  1000 = ACPI_BIOS_USING_OS_MEMORY.

  ACPI has been a fatal error during the processing of a region of memory operation. The region of operation memory tried memory card which has been attributed to the use of the OS.

  This bug check usually appears in these 2 scenarios:

  1 BIOS bug / damaged and must be resolved with an update or go back to the manufacturer.

  2 Rootkit (not very common).

  In our case, it is #1. Exactly, what is happening? I can't be quite too sure due to having to have a version controlled ACPI.sys to debug such a question and with what is happening on another system user, I won't use them as guinea pigs. However, this seems a general problem from what I can tell about this model BIOS. For reference, a BIOS update is not currently available for this specific model, so not quite sure that the end user can do, especially if their systems of replacement of the same model have the same question over and over again.

  -----------------

  Two threads where it occurs, I will update if I see anymore:

  1. Windows 8 crashes after being in the mode 'sleep' - Microsoft Community

  2. brand new computer under Windows 8 - 2 accidents in first day - Microsoft Community

  Why I write this here? Well, on the one hand, I can't find a place to contact HP and / r supports directly without really own a HP machine. So, with that said, two questions:

  1. is there a way to contact HP directly on this issue?

  2. is it and/or any other person with this specific model of HP's have this problem?

  Kind regards

  Patrick

  Hi Patrick,

  This forum is mainly of volunteers, and HP has no official presence here.    I ask that your question is raised.  In the meantime, you or your client should open an official ticket with HP support.  These PC is still covered by the warranty.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• Want to 700-074: dual band Compatible WiFi card want to model #H5Q09AA 700-074

  Eager to upgrade my desire 700-074 single band 2.4 Ghz 1 x 1 technology for a dual band wireless card use 5.0 Ghz internet.

  Currently, the machine has a Ralink RT3290 802.11 bgn adapter Wi - Fi installed initially with the machine

  The processor is Intel Core i5-4430 CPU @ 3.00 Ghz 4 hearts

  Motherboard: MS-7826 (Kaili) Μatx form factor

  Expansion slots: 1 PCI Express x 16 (Gen3.0);  3 PCI Express x 1 (Gen2.0); 1 mini half-length card

  Which card should I which would be compatible with these specifications. Alternatively, where can I go to find this information?

  Thanks for any help.

  You are welcome.  Thank you for the additional information.

  Here's the card wireless installed on your computer according to the Specifications of the product:

  Figure: Wireless card - top view

  • Interface type: PCI express card mini mid-length

• HP Envy 700-074: SM Bus controller driver

  I recently bought the HP Envy 700-074 a member of the family who tried from a Mac. Needless to say, it did not work. After several frustrating months of trying to learn Windows 8 I dropped and classified down to Windows 7. This is where my problems started. Now, Miss me all the types of drivers. I installed some of them, but it's just one after the other. That is asking is the SM Bus controller now. But the utility update drivers Intel always tells me that I need the Iris of the Intel and the graphic Driver HD for Windows * 7/8/8.1 64 bit, I have installed.

  I'm so frustrated. I've never had these problems with a computer before, especially when you install a different program. I am a user of Windows/PC for more than 20 years. It shouldn't be this hard.

  Hello

  Try:

  https://Downloadcenter.Intel.com/download/20775

  Concerning

• 2nd optical drive in HP 700-074

  First time poster.

  I more or less decided on the HP Envy 700 - 074 as my new computer. My question is this:

  I would move the Blu - Ray Burner I have in my current system in this new model, but the eject button on the drive is at the bottom of the unit, instead of just above the bottom, as it is in most of the readers. I had to remove the slab to my Dell for this player, because he would not contact with the eject button.

  I'll be able to use this disc in the 700-74, or do I have to buy another drive that has the well-positioned eject button or buy an external hard drive?

  Thanks for any input.

  Clay

  As the eject button is in a different position (thanks, LG), using Windows to eject the disk is an option. The player is around 5 years, however, and I have my eye on a nice USB 3.0 external drive, so I can go that route.
  
  Thanks for your reply.

• Want to 700-074: update BIOS GUI is in Chinese!

  HP Support Assistant today announced that an update was available for the BIOS in my URGE to 700-074.  However, when the update tries to install, the user interface appear in Chinese, I can't read.  English please!

  Does anyone else have this problem?  Have you found how to get around?

  Thank you

  ENVYable

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• confused about the want 700-074 update bios - it's for my computer?

  Hi all

  I am a happy owner of a 700-074 HP Envy computer. I have a question about a recent update BIOS I've seen on the software and drivers download page on the main site HP.COM. I frequently check the site for updates of drivers and software.

  The update in question is classified

  Update BIOS HP Compaq consumer desktop PC (SSID family ROM 2AF3)

  Although the ROMA family corresponds to the family on my computer, it lists the update of a HP Compaq computer.

  This BIOS does the 700-074 want system specifically? I guess it's because it it lists to the title of the download page for 700-074 want systems. However, I don't want to patch my BIOS with the update incorrect if it is considered an error.

  Any help will be appreciated.  Thank you!

  Hello @boinc127,

  I understand that you are looking to confirm that the update of the BIOS HP Compaq consumer Desktop PC BIOS Update (2AF3 ROM family SSID) is appropriate for your computer. As far as I can tell it's the update of the correct BIOS for your computer.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• -USB - HP ENVY PC Desktop 700-074 wireless receiver

  Buy HP ENVY 700-074 Desktop PC. I carefully unpacked and configuration system.

  Mouse and wireless keyboard does not work.  I checked and rechecked for a wireless receiver in the package. No not found.

  Is it possible that I'm missing a USB receiver or is it a built-in feature?

  Called the best buy. Apparently no USB receiver not packed with the mouse and keyboard.

  Thanks HP!

• HP Envy 700-074 custom ' mode "Eve"

  1. Windows 8
  2. HP Envy 700-074 with monitor from 2005.
  3. Keyboard and mouse wireless
  4. 2005 via USB HP printer (don't know the model right now, I'm at work)
  5. The screensaver is the folding at home screensaver.
  6. HP Envy bought in February 2014.

  The computer enters mode "Eve" from one day to the next, or I hit function-SleepButton. Monitor goes into mode with a yellow economy light energy.

  When I try to wake the computer via the keyboard, the monitor is from yellow to green, which means that the PC is a signal, the fans of PC and the light is on, but the screen remains black.

  Tried to update the bios by using this link , but I get an error every time:

  "This update of the BIOS is not compatible with this unit". I think it's BIOS has not confirmed the update via msinfo32. BIOS version is still 80.15. Option to upgrade button is gray, this button on the same BIOS update screen as 'Save BIOS to flash drive' and 'Save BIOS file.

  The issue is not that the keyboard is not set to wake up the PC, as the monitor light goes from yellow to green, when I type any key of the keyboard. Which indicates that the PC is a signal.

  What are my options here?

  Thank you.

  Your update to the newest BIOS would not go. So I installed all the updates Windows 8, including those in option, and it seems now out of fashion 'sleep'. Thank you.

• HP envy 700-074 BIOS

  OS 8.1

  ENVY model 700-074

  I tried to get into the Bios of my computer without success. I restarted the computer and pressing ESC, F1, F2, F10, F11 and F12 does not. The Lockscreen computer ({?, I don't know what it's really} poster and when a key is press the password screen is displayed.) Enter the password to get to the start screen. I was not able to access the bios screen.

  Page status of password, I can change my password by accessing Account.live.com. It has all the information that the BIOS would have.

  How in the BIOS?

  Are their manual for this computer? And where are they?

  I'm learning my computer and software and zero.

  Tazw

  Hello:

  You can see if this info matches your screen that I found the procedure for W8.1

  http://www.thewindowsclub.com/access-UEFI-firmware-settings-Windows-8-1

  If it does not, unfortunately, I wouldn't have any other suggestions.

• Want to 700-074: internet not working not

  So I recently downgraded Windows 10 for window 7 Professional & I couldn't find NICs on your website. I need help please

  Hello

  Please try:

  1 LAN cable:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_104622_1 & swEnvOid = 4063

  2. wireless

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_134477_1

  3. your machine may have Bluetooth (it has BT for Windows 8.1 driver on its home page).

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_110019_1

  Kind regards.