Its SigmaTel emits

Similar Questions

• Audio driver for Windows 7 required - Qosmio G30

  Best of all,

  I am Spanish. I have a Toshiba Qosmio G30-198. I installed "Windows 7" and ok.

  The only thing the map its (Sigmatel STAC9200d) does not work with this system.

  I install drivers of procedures of the 'Vista' and the 'XP' and nothing.

  Does anyone think how can I make it work?

  Thank you.

  Hello

  And why does the Vista driver not work? Normally the Vista drivers are also working on Windows 7, so maybe you should check it once again!

  Also try installing the driver in compatibility mode. Run the installer as administrator and Vista mode.

• 30 - Qosmio F-113: no sound after installing WinXP Pro

  I installed Windows XP Professional on my Qosmio F30-113 (preinstalled system is WinXP MCE).
  All devices work properly except for the audio card.
  It not there no sound anywhere, but in Device Manager, it seems, there is no problem with any device.

  I tried to install the audio driver (sound-qf30-xpmce - 51049460.zip) TOSHIBA-Center download - but after restarting Windows install tells me, that the current system doesn't support driver, which I am trying to install.

  What should I do? Which driver to use?

  Hello

  It's very strange. As far as I know that the driver can also be used with WXP Home and Pro. There is no difference. You are right on the sound card. Your laptop has an its SigmaTel STAC9200D card and the driver is SigmaTel HD Audio driver V5.10.4946.0.

  I don't know how did you install all the drivers, but I hope that you did this in the order of good facilities. The order of good facilities, you can find after downloading the install Instructions document.

• XPS M1710 - Audio hardware problem

  I have a XPS M1710, probably close to 10 years. It has been impeccable in the performance over the years. However, one day my audio just stopped working. There a (!) in Device Manager, next to my card its SigmaTel High Definition Audio CODEC. When I go to properties it says the following.

  I am running Windows XP by the way...

  "State of the device.

  Windows has properly loaded this hardware device driver but cannot very well the hardware device (Code 41)"

  I decided to buy a new motherboard and recently installed new motherboard and I have the same exact error.

  I know that this laptop is super old, but that doesn't make any sense to me why the audio is always a failure. I'm going to uninstall the new motherboard and make sure that all connections seem to be good.

  Any other advice? A dead speaker at risk of this or any other material?

  Thank you

  Hello. A faulty speaker would not cause the error message. You could get the codec failed if it failed both the MB origin and replacement. You can test the codec running audio Dell 32-bit diagnostic tests. If you are testing is no longer, and then follow the instructions here to run the external media.

  If the audio tests pass then it's a software problem. It's probably too late to try the Windows system restore, so I would try to re - install the audio driver according to the normal order of the facility would be used after a new OS:

  1. install the Notebook System Software and restart.

  2 install the Intel chipset driver and restart.

  3 reinstall the driver Sigmatel.

  If still no sound but its past tests, then you should get audio back after the next time you perform a system recovery.

• Entry monitor (FAQ solution did not work)

  Well, I'm trying to run my PS3 audio through my card its Sigmatel Vostro 1500. I saw registry workaround in the FAQ (and several other places just googling). The only problem is, when I activate this, the PS3 sounds good, but my computer plays through my Logitech Z-2300 to almost the same quality as they did. If I remove the registry change, the sound quality is up, but then I can't use more input.

  Anyone who has another expirence this / has a solution?

  Thank you!

  
  

• Problem with Vista, WMP and Creative SB Audigy software

  I have an audio continuous problem that I can't find an answer. The computer is a Dell Inspiron E1505 w / Vista Ultimate Edition and a map of its SigmaTel. (computer detailed at the end of the post) I have Creative Sound Blaster Audigy software installed. I have in fact two problems, but I'll start with the first and main one.
   
  The first problem seems to be quite common now and is listed in this link...
   
  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&CS=04&DL=false&l=en&s=BSD&docid=28DC8E40D7FC2B06E040A68F5B284B0F&doclang=en
   
  Deactivation of improvements solves this problem, HOWEVER... The only problem with that is that I then cannot use my Creative SoundBlaster HD audio software and am limited to graphic equalizer in WMP. I would prefer not to have to do, the software allows a significant improvement in sound quality, and it was not free.  None of the other things to try to disable helped either.
   
  Now my other problem, which is currently more emergency. This problem occurs when the Sound Blaster software is activated. Every so often in random conditions, I'll bring your computer and the sound quality is totally messed up. It's hard to describe, but fundamentally, it becomes really tinny and hollow survey, w / no bass... totally looks like crap to me. As I said, he would only do this every once in awhile and it occurred in general if say, I put the computer in standby mode, unplugged, then took... or a random combination of those involving removal electric a/c. It used to be I could just do a system restore to the last restore point and might solve the problem. But the last time this happenend has not all restore points, I've tried and now I'm stuck w / either its hail and shabby (active SB), or disable the improvements and just using the equalizer WMP!
   
  I enjoy music and plays the music on my computer all the time. I want to at least be able to use my software again, but if anyone knows anything of these problems, I would be very happy to help. Thank you.
   
  Dell Inspiron E1505
  Intel Core Duo T2400 1.83 GHz (667 MHz front bus)
  Crucial 2GB 667 MHz dual channel RAM
  ATI Mobility Radeon X 1400 256 MB graphics card
  60 GB at 7200 RPM SATA HD
  Windows Vista Ultimate Edition

  
  

• Microphone doesn't work is not on my Vostro 1500 with Vista Ultimate

  I recently received my DELL Vostro 1500 which has a Sigmatel Soundcard and I installed Vista on it and found that Vista had already installed a generic driver of high definition for him. So, I was ok. But then I found that the built-in mic or even an external MIC does not work. I get a harwarde is unavailable or not installed error. Someone help me please...

  I browsed the forums and found a lot of pilots who are supposed to be its Sigmatel for Vista drivers, and whenever I tried to install one of them I get an object not found error or something similar to it.

  I have a dual-boot configuration, so I am running XP as well and everything works fine under XP with the drivers provided by DELL. But not on Vista...

  DELL technical support, it's not what I expected since I recently moved to this laptop from my previous HP-Compaq Presario 6000 and HP support was great, including the live chat with technical support people who helped me with my problems of pilot with this laptop. I now regret to have bought a DELL laptop, since I do not get the kind of service that I expected from DELL. In any case...

  SOMEONE... PLEASE HELP ME!

  
  

• (MP3 sound) to jump on the Latitude d520

  Hello

  I searched the forum for a solution to my problem, but had no luck.

  I have a new Latitude D520 and all jump sounds (tested with .mp3 and .wav files). The problem occurs on all players (tested with Windows media player and Winamp).

  This laptop is equipped with a card its sigmatel. Details of the pilot are:

  Supplier: SigmaTel

  Date: 24/03/2006

  Versioin: 5.10.0.4995

  What could be the problem?

  
  

• What signal is emitted in the ListView, when one of its cells appears in or from the screen turns off?

  What signal is emitted in the ListView, when one of its cells appears in or from the screen turns off?

  I created listView with custom listItemComponents

  Is there any signal when listItemComponent go to the screen?

  Currently, it is not possible to detect if the cells turns off the screen. Even if you join LayoutUpdateHandler them they will just stop send updates when you go off the screen. I managed to hack a solution using a timer, but I guess that a cleaner approach would more use a ScrollView with CustomControls instead:

  1. get the dimensions of the ScrollView joining ScrollView LayoutUpdateHandler.

  2. attach the LayoutUpdateHandlers to the CustomControls.

  UPD: It is also viewableArea & viewableAreaChanged event scrollView property.

  3. If the controls that were inside the visible area of the ScrollView went outside, raises the event.

  Of course re-use of cell works that way.

  It's so easy to grab the cell on the screen:

  If you use ListItemProvider, updateItem() function is called when the element appears on the screen:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__listitemprovider.html

  It will also be called if the data item are updated in the model.

  When the item is created for the first time, createItem() is called.

• Boring its static/buzzing with SigmaTel STAC92XX on Inspiron 1520 on headphones

  Hello

  I just got my new Inspiron 1520 and it is a day of age. My card the SigmaTel STAC92XX audio is fine until I have use the headphones Jack. Any type of headphones I plug in it (from a Phillips for a high-end Sennheiser headphones), it has the sound of static/buzzing low very inconvenient in the background, even if the sound works.

  If I cut off everything, even its static/buzz still exists. Does anyone also have this same problem?

  Thank you

  I.S.

  
  

• REGZA 40 "LCD TV emits noise high frequency

  A few months ago, I was lucky to win this TV, a 106 cm LCD Regza HD display.
  I was very happy because I could never afford it myself, and I am very happy with its performance in general.

  I found however is that it emits a high frequency noise that triggers tinnitus in my hearing. (For tinnitus are a squeaking noise acute heard by people who have damaged their ears, sometimes called ringing in the ears).

  I guess that my hearing is already sensitive listening to lots of live music over the years, but I think that this noise is excessive.
  I think that a monitor of this size is by using a good amount of power and maybe feeding could be too work itself.

  The monitor makes this noise at a constant level even before the start of the sound of the TV show.
  I'm curious to know what the suggestion forum users to reduce the background noise?

  The monitor is still under warranty because it is only 6 months old.
  I wanted to be prepared to discuss with the Toshiba warranty people if the forum users can suggest, first, what could be the cause of noise and on the other hand, the possible ways to address the issue.

  Thank you petekey4

  Hello Pete

  As you can see it's Toshiba computer forum and I do not think you will find a lot of people here who want to discuss LCD Toshiba TV.
  In any case, if the TV is new and with valid warranty the best option for you is to contact the service people and let check your new TV.

• Satellite A50 432: after reinstalling Windows I can't do its job properly

  I have a problem with the laptop A50-432 of unknown source without recovery CD when Windows XP has been reinstalled and after re-installation, I can no longer do its job properly.

  I have installed sound drivers SigmaTel C-Major Audio-sa50-xp - 614013835.zip:

  27/05/04, its pilot, Sigma, Windows XP, 6.14.01.3835, World Wide

  and what I get is noise from great height and whistle of the right speaker only. If I set an audio file for playback I can rarely hear good audio clean for a second or less and then he returned to his noises and whistles. If I connect the headphones to use instead of the speakers, the effect is the same.

  I followed the installation order and then reinstalled the drivers several times with no luck for his work. Audio worked fine before reinstalling Windows. I have no problem with the rest of the component and I also tried to disable the other drivers (for LAN, IEEE 1394, 802.11, etc.) without effect.

  Does anyone have ideas how I can fix this problem?

  Thank you

  Roman salute

  This problem occurs when you use the headset?

• The mouse jumping around corner on its own (TX2000 tablet PC)

  HP needs to fix or replace my HP TX2000. The mouse cursor keeps jumping to the bottom right of the screen on its own. I realized that there are a lot of heat generated in this corner of the basic reason keyboard, making it probably the mouse jump there. the mouse works perfectly when I rotate the screen of this corner, but lie, which makes it extremely difficult to work with the screen tilted in a different direction and the Del key BkSpace hiding behind the screen! Ofcuorse, this heat is the culprit and a strange design of unit fault!

  I had this same problem (although it seems a bit more sporadic than what others have experienced).

  The physical reason of the problem seems to be the corner of the base of the shelf RF interference; because the tablet takes the pen by measuring how much the emitted RF is altered by the pen, the interference near the corner must "look like" the pen being there.

  I have "confirmed" this by placing a piece of foil between the screen and the base (in the corner only); This removes the behavior of jumping.  Although I did not open my tablet, I suppose that the interference comes from the power of conditioning circuits for the processor?

  In regards to the Wacom HID "pen" disable the fix mentioned above: the feather still work like a pen (RF, with a fine location and pressure sensitivity), or it doesn't work like a 'finger' (capacitive touch sensor on screen, much coarser location resolution)?

• SigmaTel High Definition Audio CODEC is not compatible with Windows 7

  SigmaTel High Definition Audio CODEC does not work with windows 7. I tried to get my laptop to detect the hardware and it doesn't seem to be compatible with windows 7. I tried to update but without the cell knowing that its here I can't update. What can I do? Having no sound on my laptop, it is so quiet...

  Exactly the same thing happened to me. I upgraded my computer dell laptop of Vista (32) Windows 7 (32) on 24 December.  My codec high definition audio sigmatel could not be found since then.  This morning, I got fed up and found the free codec download sigmatel high definition audio...  Downloaded and my sound is working again...  We think just too hard I guess.  Hope it will be useful to you.  Good luck.

  http://download.CNET.com/SigmaTel-high-definition-audio-codec/3000-2110_4-173629.html

• Inspiron 6400 Sigmatel sound card does not

  I have Insipiron 6400. Used if for about 20 months with no problems.

  Last month the speaker into the icon has disappeared and I wasn't able to get all the laptop except the beep sounds. After a few days it started working again in itself and now again its stopped working.

  Symptoms:

  1. I am not able to find driver Sigmatel in Manager devices under sound, video and game controllers. Sigmatel icon is also not available in the control panel. It seems that the Sigmatel Audio cannot be detected.

  2. in Device Manager > system devices > Bus Microsoft UAA for High Definition Audio driver displays a yellow exclamation point.

  3 Dell Diganostics tests show the following errors-

  IB63:0268 - a timeout has occurred while you wait for the audio controller to generate an interrupt.

  IB63:0667 - a timeout has occurred while you wait for the audio controller to generate a break in reading

  I tried Solutions:

  1. download and reinstall all the drivers available for Sigmatel whose one of the DELL CD that came with the laptop. Most of them could not install after reboot.

  2. removal of the Microsoft driver, install sigmatel and then install the Microsoft driver.

  Can anyone help?

  Thank you!