ITunes can be run with the library of music stored on a USB flash drive?

I'm out of memory on my MacBook Air and I wonder if it is possible to move my iTunes library a flash drive (that I leave permanently in the USB port) in order to free up space on my hard drive?

Yes, as long as the drive is large enough and all your media is located in the iTunes Media folder. Cut and paste the whole folder in the folder iTunes music in your profile on the USB. Press on and hold option as launch iTunes to get her choose or create the dialogue. Click on choose and search for the new path. iTunes will now remember this path whenever it is running.

TT2

Tags: iTunes

Similar Questions

  • A movie can be stored on a usb flash drive?

    I would you ask my camcorder recorded videos, currently stored in Photos, iMovie, and the camcorder on a USB flash drive SD card so I can read in my car on the navigation screen. How can I upload videos to a USB key?

    Yes, you can store movies on your USB.  Probably the easiest way is to drag the movies.  USB drives which are formulated FAT 32, as most of them, are limited to 4 GB in size for any single file.  Would be good to try with a movie just to make sure that your USB will play your

    navigation screen of the car in any way you are intending to do.

  • What is the best method to add data to a file stored on a usb flash drive to avoid too many write cycles?

    Hello

    I'm trying to store an important data on a cRIO sampled stream in the USB flash drive.

    I believe that there are two ways to add data to a file:

    1. open the file outside of the loop, then write to the file loop, then close the file outside the loop.

    Pros; More quickly and efficiently than the opening and closing of files in a loop is resource heavy equipment.

    Disadvantages; If the program fails partially through, all data is lost.

    2. open the file, write to the file and close the file, all in the loop.

    With the advantages and disadvantages as opposed to option 1.

    As my cRIO is finally deployed in a hostile environment and data are valuable and processing speed is not an issue of concern in this project, I'm leaning towards option 2, but after a few basic calculations that I realize that I'll be writing/opening/closing the file of thousands of times and I wanted to know if this will wear out the flash memory?

    My uncertainty is due to not understanding what happens when a file is opened written to and closed.  He writes the new data to new areas of the flash, or it write all data on top?  The latter would cause me problems not too long term!

    Any help gratefully received.

    A big thank you and best regards,

    Ed

    The 'magic' is not in the File Format (PDM vs vs binary text), but in the "life" of the file.  This solution creates a file of 24 hours and maintains a different file for each day.  If the USB "dies", you lose everything you have not backed up somewhere.  If the program dies (or errors), you lose the data for the current day.  You end up with multiple files (which can be a more or less), but we must still make the trade-off between (duration) of the file and the file number opens (which relates to your concern for the longevity of the USB).  By the way, I suspect that a good quality USB key (it's what you mean, right?  Or do you mean a hard drive USB powered?  Comments probably apply both) can predict today to not die on you, everything just because you make a lot of reads/writes (of course, you could get in-a-thousand...).

    Bob Schor

  • the guest account can access encrypted USB flash drive?

    So here's the scenario

    I encrypted an external usb flash drive.  If I have access to this USB key, enter my password, decrypt the USB key. then close the session,

    and go to access as a guest (ALWAYS logged IN MY ACCOUNT) so that the family can use my computer,

    What happens to someone else, they can access the flash drive which has been deciphered from my account?

    should not the external drive is accessible to the account, that it has been deciphered?

    Once the drive is mounted (enabling access through decryption as well) is accessible to all users.

  • Split 13 x 2 PCs 13-m110dx: cannot perform the system recovery using a USB flash drive

    I just bought a Split 13 x 2 13-m110dx PC that came with Windows 8. I have upgraded the OS to 8.1 and made a copy of the recovery Partition using a USB flash drive, and deleted the recovery of the PC disk that I learned that I could do. However, when I tried to retrieve OEM provided using the USB flash drive by following the directions at creation and use of a recovery of Microsoft USB drive (Windows 8) "System Recovery" was not available to the title of "troubleshooting." I tried to tell it to boot from the USB, but it askes me to insert the support of windows or other media, but rejects the flash player. What do I do now because I have not all discs?

    To use the Flash created to restore the system to the factory settings, see "Recovering from a USB flash drive" appearing in the following link:

    HP computers - running a HP System Recovery (Windows 8)
    HP System Recovery allows to reinstall or restore a HP with Windows 8 computer to the way it was at a previous time.
  • "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

    So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

    So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

    As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

    Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • What can I do to make the Satellite A665-S6086 run with the new memory?

    I was able to update the BIOS for my Satellite A665-S6086 by updating 2.30 on CD burning. I have Windows 7 64 bit. I needed to update the BIOS, because I upgraded my RAM/memory of 2 GB (4 GB total) two cards two cards of 4 GB (8 GB total).

    My question now is when I start my computer with the new RAM/memory (two cards that are KTT-S3BS / 4G Kingston DDR3 1333 MHZ SODIMM SGL RANK), it freezes on the screen from Windows startup. Then when I hold the power button to shut it down and restart it, it wants to start using Windows repair but then crashes again. When I put in the memory of the old man and he start up, it starts the Windows repair and runs normally.

    What can I do to make my computer run with the new memory?

    I thank very you much in advance!

    What you can do?
    Buy an another RAM modules that are fully compatible with the laptop.
    It seems that you want to use the RAM modules which are not totally compatible and therefore the system hangs.

    By the way: the CPU that is used in this notebook runs the DDR3-800 and DDR3-1066
    RAM modules.
    http://Ark.Intel.com/products/49020

    I would not recommend to use the modules of DDR3-1333 but PA3677U-1M4G 4 GB DDR3-1066

  • iTunes does not synchronize with the iPhone SE

    My new iPhone IS will not sync with my iTunes library.  Whenever I connect it to my PC, I get the error message shown above.  The iPhone and iTunes are running with the latest version of the software, as shown in the image below.

    I don't know what could be the problem.  I never had a problem syncing my iPod or my iPhone 5 in the past.  I followed all the troubleshooting tips offered by the Apple Support, but I get the same error message.  The USB port is fine because the phone recharges when it is connected and other devices work in it as well.  It's iTunes that has a problem because iTunes won't even detect that the phone is connected after the initial error message.  Help, please.  All the world has ever encountered this?  If so, what do you have to solve the problem?  Thanks for your time.

    -Nathan

    Hello nlg0405. I'm very fond of Windows Vista, but I fear that Apple is not, and I have very bad news for you: iTunes 12.1.3 isn't really "the latest version of iTunes," but it was the last version to support Vista and XP, and now it's almost a year. If you visit to Download iTunes for Windows (32 bit) 12.1.3, under What's new in iTunes , it should be noted that ' SE from iPhone and iPad Pro (9.7 inches) only is not supported on Windows XP or Windows Vista.» Exchanging the SE to an older model of the iPhone maybe not much better, because the 10 iOS update coming next month probably will make all the mobile devices Apple incompatible with Vista. I'm afraid that the only good solution is a more recent version of Windows or Macintosh.

  • I recently downloaded my favorite CD music in my I tunes library, how can you transfer this music on a USB Flash drive so that I can play the music through my stereo system H D - Bike. I'm 10 Windows on my PC

    I recently downloaded my favorite CD music in my I tunes library, how can you transfer this music on a USB Flash drive so that I can play the music through my H D - bike

    stereo system.

    I'm 10 Windows on my PC

    Select the songs in iTunes, let them slip into a file Explorer window showing the flash drive, drop.

    TT2

  • void VI does not run with the main VI.

    My main and sub VI is attatched.

    danil33 wrote:

    Re: void / VI does not run with the main VI.

    When you start your main program, the Subvi is called and the main VI must wait the Subvi before it can continue. However, the Subvi is not set to open the Panel before, so very probably that it runs in the background for 100 seconds (1000 iteration to 100ms), because no one can press the stop button at the beginning to put an end to the Subvi. Once the Subvi is completed, the last value is returned to the main VI via the output connector and the main VI can process and display this last value. At this point, the main VI stops, because it's done (hopefully you do not "continuous operation").

    Obviously you have some misconceptions of beginners on the stream. Please we tell exactly what you expect the program to do, and we might be able to point in the right direction.

  • RunAs with the /savecred option does not accept the credentials stored by the cmdkey command

    Hello

    I am trying to automate the storage of credentials for profiles of several people on several servers so that they can use it with scripts, they will use that have the command 'runas' with the /savecred option.  I use the command "cmdkey" to store the user and the password, but when the runas command is run, it prompts for the password anyway.  I know that the /savecred works since if I leave the command-line runas for the password and I enter, on subsequent runs, he is more requested for the password.  Curiously, if I use the cmdkey command to replace the stored credentials, runas invite you again the password so it can store it himself.  Almost as runas does not 'trust' cmdkey.  Any thoughts on why this can happen and how can I get around it?  I really need to automate the identification information storing or it will take a couple hundred manual executions of the runas command to get this store on the profiles of all the people in need.

    Hello

    The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

    http://social.technet.Microsoft.com/forums/en/category/w7itpro, w8itpro, windowsvistaitpro, windowsxpitpro, windowsintune

  • Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

    Hi all

    I tried to apply the patch from Jan 2016 to the Weblogic Server that runs the RMS Application.

    The version of the Weblogic Server is 10.3.6

    The version of RMS App is 13.2.6

    While applying the patch that has a PATCH-LIST of S8C2 on the Weblogic Server, I encountered the following error:

    [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

    Checking for conflicts...

    Detected A - conflict to solve and run the installation of the patch again

    Conflict condition details below:

    Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

    After reading the forums, I followed the suggestion to delete the previous patch: EJUW and who has obtained successfully removed as shown below, when I tried to install the Patch Jan complained conflict ZLNA patch and when trying to remove the ZLNA encountered unrecognized patch ID patch: ZLNA.

    [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = EJUW-prod_dir = $WLS_HOME/wlserver_10.3

    Checking for conflicts...

    No conflict detected

    Removal of the Patch ID: EJUW...

    Result: success

    [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

    Checking for conflicts...

    Detected A - conflict to solve and run the installation of the patch again

    Conflict condition details below:

    Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA

    [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = ZLNA-prod_dir = $WLS_HOME/wlserver_10.3

    Encountered unrecognized patch ID: ZLNA

    Any suggestions how to solve and apply the fix successfully Jan would be useful.

    Thank you.

    Hello

    Can you please set the download directory of the fix for MW_HOME/utils/bsu/cache_dir/with the help of Smart updated interface and test again.

    To designate a directory to download the hotfix, follow these steps:

    Start the smart update.

    On the Smart Update main window, choose file > Preferences.

    The Preferences dialog box appears.

    In the section Patch download directory of the Preferences dialog box, specify the path to the download patch directory.

    https://docs.Oracle.com/CD/E14759_01/doc.32/e14143/start.htm

    Thank you

    Aishwarya

  • Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

    Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

    SE connect-VIServer esxihostname-user root - password newpasswd

    This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

    y at - it something I have left out. I really appreciate any assistance that you people can provide.

    Thank you, Joe

    It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

    Edit:

    Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

  • MouseCursorData can be used with the SDK 3.6?

    Hello!

    playerglobal.swc in the title of 'libs/Player/10' has been substituted for the one under "libs/player/10.2".

    -target-player has been defined in 10.2.0.

    When you use MouseCursorData, there is no error in compilation.

    However, when running or debugging the application Exception occurs.

    VerifyError: Error #1014: class not found flash. ui::MouseCursorData.

    playerglobal.swc for flash player 11 can be used with the SDK 3.6.

    the value target-Player 11.0.0.

  • 1 series watch can be coupled with the iPhone 7

    I was wondering if the watch 1 series can be coupled with the new iPhone 7.  Someone told me you had to get the series 2 Watch for the new iPhone, but that doesn't look good

    Yes. It can be paired with an iPhone 5 or later, including an iPhone 7.

Maybe you are looking for