iTunes could not copy (name of the song) to the iPod (ipod name) because an unknown error occurred (-50)
Hello
I use the latest version of iTunes and 160 GB iPod Classic. I create playlist and drag and drop the files there, he begins to synchronize the songs (update files to iPod, copy) but after a few songs, it gives me this error:
iTunes could not copy (name of the song) to the iPod (ipod name) because an unknown error occurred (-50)
After clicking 'ok' on the error message, it shows that the iPod got synced up that song (for example songs 2456) but when I try to delete, for example, each piece in the last playlist so I can send all has couse again once I know not where is the last song, it freezes. I can't even click on safely remove the lower right, it does nothing. When I unplug the iPod and reconnect, it shows that the iPod memory is for example 10 gb full couse songs that got synced up to the error, but it shows them as "other". If I wait a few minutes, it automatically deletes and it for example shows 900 MB is full with others. If I wait for each selection to sync, which always occurs within a song at random, but the rest of the songs that I've waited sync appears as usual. But if I try to send new songs, the same error apears after 3-10 songs constantly. But after that I get the error again, the same thing happens in the freezing point. If I restore the iPod and you try to send the songs again he again Gets a thousands of songs, the process repeats...
I restored my iPod, I did on this topic of error checking. I use no bitrate convertion. Yes, I tried sending the same files after restoring the iPod, no error. Any ideas?
Thank you!
I just use CopyTrans Manager to it. Everything went well.
Tags: Windows
Similar Questions
-
copy on the disk "macintosh hd" failed. an unknown error occurred (-4)
When I try to sync my iPad air 2 to my mac pro book I get the following message:-trying to copy on the disk "macintosh hd" failed. an unknown error occurred (-4).
Would appreciate if someone could help it.
I have this problem too!
-
Lightroom has ceased to import suddenly - not my image folder, nor my CF cards - can anyone help please
This is a permissions issue when you do not have permission read & write in the destination folder when you copy photos to. Change your permissions
-
iTunes copy 15 of my songs on my iPod
I currently have about 4000 songs in my iTunes library. I recently bought an album containing 20 MP3 files and them well were imported into my iTunes (version 12.3.2.35) without any problem. I can read on my MacBook Air computer using iTunes. However, when I try to sync my iTunes library with my iPod 160 GB Classic (software version 2.0.4), I get an error message after it's done.
The message says, "some of the items in the iTunes library were not copied to the iPod because one or more errors occurred." 15 total warnings.
All fifteen errors are the same except for the name of the song in the warning...
i.e. "iTunes could not copy"I can't drive 55' to the iPod because the file could not be converted.""
My current operating system on my computer's OS X El Capitan 10.11.3 version
How can I my iTunes to sync all my music on my iPod?
You have the option "Convert higher bitrate songs to XXX AAFC" selected?
If this isn't the case, I don't see why it should be any conversion.
The songs do play OK in iTunes?
Common characteristics such as format or bitrate?
TT2
-
My itunes has been fine. All of a sudden today it now gives me this error: error Itunes - iTunes could not connect to the store purchases - if you have a software firewall, make sure that it has been set to allow communication on port 443.
I do not have my firewall active. I connected to itunes, quit itunes, reconnected - still a problem.
Was there an update and now it's a bug? Help!
Thank you!
Run the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
Original title: sign of problems
at the start of my system, I get the following, called = AppleSyncNotifier.exe he then continued to say in the dialog = the procedure entry point xml text reader const name could not be located in the dynamic link libxl2.dll, it prevents me from doing whatever it is on the opening page, anyone help? John
Hello
AppleSyncNotifier.exe is part of ITunes. To resolve the issue, try the following methods.
Method 1:
I suggest that you download and reinstall ITunes since this link provided below to fix the problem.
http://www.Apple.com/downloads/
Method 2:
You can perform the clean boot in order to eliminate the problem.
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note:
After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
For further assistance, you can get in touch with support for ITunes.
https://discussions.Apple.com/community/iTunes?CategoryID=149
-
I have the demo version of LR. I imported the pictures that were on my hard drive. Now, I can't import more photos when I want to add new ones. I get a screen that says that some operations have not been performed. Could not copy the file to the location requested.
Help, please. I don't know what else to try.
If these images are already on your hard drive, you must use the Add option.
If they are on a USB key and you want to copy them to your hard drive during import, then the Destination you have select this option to copy them doesn't have the appropriate permissions for your user name. , Select a different Destination or change the permissions on the folder that you selected.
-
So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong. Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?
A new phone will be iOS10. iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer. Software update checks only the updates to the current version of the system that you are running but that itself can be updated. It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11. El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB). Making a big jump in versions of system is also more likely to affect the old software.
At el capitan Snow Leopard, it will make my macbook is slow? - https://discussions.apple.com/thread/7412959
Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/
-
Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.
You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer. Software update checks only the updates to the current version of the system that you are running but that itself can be updated. It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11. El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB). Making a big jump in versions of system is also more likely to affect the old software.
At el capitan Snow Leopard, it will make my macbook is slow? - https://discussions.apple.com/thread/7412959
Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/
If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.
-
iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.
You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer. Software update checks only the updates to the current version of the system that you are running but that itself can be updated. It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11. El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB). Making a big jump in versions of system is also more likely to affect the old software.
At el capitan Snow Leopard, it will make my macbook is slow? - https://discussions.apple.com/thread/7412959
Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/
If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.
-
Setup cannot copy files?
I did a reinstall of windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd. Please make sure the disk is in the e: drive and try again. I can locate the file and find no problem sound on the disc. Here is a list of the files that gave this same error.
migregdb.ex_
icwconn1.ex_
ICWCONN2.ex_
INETWIZ.ex_
icwhelp.dl_
icwutil.dl_
icwrmind.ex_
ICWDL.dl_
icwx25a. COURIER
icwx25b. COURIER
icwx25c. COURIER
ICWIP. COURIER
Phone.ic_
Phone.ve_
State.ic_
MSICW.is_
MSN.is_
support.ic_
Msobshel.ht_
ISIGNUP.ex_
icwtutor.ex_
icwres.dl_
trialoc.dl_
Oobeinfo.in_
Oemlogo.gi_
Mouse.ht_
ISP.ht_
Oempriv.ht_I know that the volume control does not work, and that the windows sounds are not listed, if you try to change the sounds on the system. As the noise of opening and closing session. The drive installed on a different hard disk on the same computer without error, it should not be dirty or damaged. If anyone can help with this please?
JOEY
To the file copy stage of the registry would be game. It could be a permissions issue, you could mount the drive in a different Windows NT installation type and set the permissions.
John
-
Original title: __Installing Japanese language.
Im trying to install Japanese language, I get an error message stating "windows".
Setup could not copy the appropriate files"when I
apply "install files for East Asian languages".Even when I insert the CD, the message always appears.
Hi Robin.Q,
It seems that implemented the software Interface of Japanese language files is corrupted.
You can try to download and manually install the Japanese language of this link Interface software.
http://www.Microsoft.com/unlimitedpotential/programs/LLP.mspx
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
RESET INTERNET PROTOCOL
I'm following a convenience store from apple that I get this message:"The phone"iphone"could not be restored. An unknown error occurred (6).
When I try to restore/sync my iphone to my itunes (first time I did it because it's a new phone - not new so I have no guarantee Apple).
I have no problems with the internet, only the problem of the iphone/itunes. Reset the internet protocol allows, as says apple? It is not sensible, but if I decide to do, it will cause me problems internet, if in fact it wasn't the question in the first place?
Thank you
Hello CorZT
Windows answers is not the appropriate forum for your question about Apple products. For the systematized with Apple and its products, please visit the link below. -
Prob Winmail.
Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.
Using a digital signature? Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.
Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.
Steve
-
iTunes could not connect to the iTunes store
OP: iphone 4'
try to connect to the iphone 4 to itunes, but it happens that itunes could not connect to the itunes store. the network connection timed out. Make sure that your network settings are correct and your network connection is active. then try again. but I can connect via Solution Explorer, but cannot update the phone
To connect the iPhone to iTunes problems, contact Apple for support with their software/hardware:
http://www.Apple.com/support/iTunes/
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
I have a new idea called (active safety) and would be happy if I can have apple as my sponsor because the idea is new and I have a great expectations most apple applications will be part of my idea. So who can help? who should I contact at apple?
-
I recently downloaded an image format and online on my download folder in my dock, there is always a bar the appears beneath it shows the loading progress, well this 'image' that I downloaded does not not download and the loading bar stayed there eve
-
Can I switch to Win 7 SP1 of Vista Home Basic (without Service Pack)?
Hello, currently I run Vista home basic 32-bit without the service Pack installed. I did once try and install but I got was a never-ending startup sequence (the BONES do not start) and I had to restore a backup copy of previous Vista before installin
-
DVDplayer did ' t work.
my dvd did drive ' t work, sometimes engine very n dvd players sometimes readers like ferrari, no meesege errror, it crashes after a few seconds
-
Anyone who correctly receives the SMS on the touchpad on a webOS phone? I use pre2, make and receive calls is ok, but not SMS.