iTunes crashes when opening since the last iso update

Updated my iso software a few weeks ago.  Since then, whenever I try to open itunes, it crashes and gives the following error: any suggestions on how to solve this problem?  Impossible to get in itunes at all.  Tried to start if not connected to internet/wifi etc as suggested by apple.  not good. didn't want to go that the uninstall/reinstall route until I was sure it was necessary.  Thanks in advance for your suggestions.


For general advice, see troubleshooting problems with iTunes for Windows updates.

The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.


Tags: iTunes

Similar Questions

  • Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never

    Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?

    Move on to the Discussion of Photoshop

  • iMovie on El Capitan 10.11.2 crashes when opening, indicating the download of a project.

    iMovie on El Capitan 10.11.2 crashes when opening, indicating the download of a project. You have to force quit.

    It is possible that you have a corrupted project which will cause iMovie hang when it tries to load it.

    Hold down the Alt (option) key when you launch iMovie.  This will prevent that he tries to load all projects immediately and ask for a library to open it.


  • Since the last automatic update from Microsoft, I get the message on Outlook & Excel I need to activate the product.

    Since the last automatic update from Microsoft, I get the message on Outlook & Excel I need to activate the product. When I try to activate I tells me it is already activated, they have been running fine since 2001 when the Office Proffesional was legally purchased.
    The pop-up with activation message has two buttons, "Remind me later" and the button "more..." which seems to send me around in circles when it is followed.

    Hi Dudlion,

    Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Office and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want. Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Error code: code 80072EE2, computer will not update, since the last big update.

    Original title: 80072EE2

    computer will not update. also wdi prob host service. a lot of prob since the last big update. need help

    Hi Denny,

    We may refer to the article and check if it helps to solve the problem.

    Windows Update error 80072ee2

    Otherwise, you can read the article and try the steps to solve the problem.

    Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  • Why doesn't a newly opened window to open full screen since the last Windows Update?

    Since the last series of Windows updates, a newly opened window is about 25% of screen width and somewhere in the middle of the screen.  How can I configure to open fullscreen always?

    Hi TimLaidlaw,

    1. this happens with a window of the specific application or with all windows of the application?

    2. what happens when you try to enlarge the window?

    You can try to maximize the windows and close it. Try to open it again and see if you can get a view full-screen.

  • My LR catalog will not be open since the last update

    Since the last update of creative cloud, I opened my LR catalog.  I have a PC running Windows 10.

    When I click on LR, a box pops up that says "the catalog could not be opened because of an unexpected error."  Then I have the choice to open a different catalog, or to create a new.

    I tried several thing:

    -J' selected ' create new ' thinking I could maybe create a new catalog, and then import the old.  LR refused to open the new catalog.

    -J' tried ' to open a different catalog.  I unzipped my last backup in a new folder and tried to open it.  I got the same error.

    I am at a loss to know what to do.


    LR to uninstall then reinstall. Your catalog is a file separated which will not be deleted or altered in some way by doing this.

    Also default LR backup the catalog file once every week, unless you changed this setting normal or continuously select the jump key, unless you so a backup of the file catalog which has only 6-7 days.

    It is more than likely to a permissions problem that was caused by the update of Windows.

    To uninstall open office creative cloud application and uninstall it from there. Restart the system, and then reinstall from the same application.

    Or once uninstalled, you can go here to get the original version of LR 2015/6 and then apply the 2015/6.6.1 update.

    Install Photoshop Lightroom

    Download the original version and then jour.6.1 updated manually. LR CC 2015 and LR 6 are the same exact program and the difference comes from how you're signed in. So don't be confused if all you see is LR 6.x.x on the download link.

  • Since the last 2 updates my yahoo mail will not AutoFill contacts when writing emails

    This arrangement has worked well up until the last 2 updates and works fine on Safari browser. Addresses e-mail of the AutoFill is a very important feature for my business. Can someone help me please! Thank you!

    I understand that when you compose new email in yahoo who contacts is no longer AutoComplete.

    Please update your Adobe Flash version at 17 and check the settings for interactive web pages:

  • my watch guard disconnect my 5s since the last software update iPhone

    Since the last update my watch guard disconnect from my iPhone.  I turned the phone market.  Turned bluetooth market. It connects temporarily, and then falls down.  both devices are within a few feet of each other.  also the continuous ringing start-up.  are there bugs in the new update?

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • Windows 7 crashes when stopped at the last moment on the blue screen

    I know that the new card USB 3.0 installed is cursing the fault. I need USB 3.0 and it is the third card, I installed, but all with the same fault; When I closed windows 7, at the last moment, it hangs on the blue screen, some, but not all the time that this model of plate washing appears. Please can you help me? I have Windows, new driver search, but all drivers are OK. It seems to me like a time-out; as Windows has no time to finish closing. But I'm not experience enough if this is correct, and what to do if this is correct.

    Sorry, it is not the blue screen of death. It's normal when blue screen windows 7 is going down at the last moment it stops crash and sometimes she as well has this Board band appearance.

    When I remove the USB card, the computer works and closing down as usual. This is certainly the card USB curse the problem.

    Windows 7 accepts the driver USB works fine, no update available.


    Windows 7 Home Premium, 32-bit

    CPU: AMD Athlon (fm) 64 x 2 Dual Core Processor 3800 + 2000 MHz frequency

    Motherboard: ASUS A8N-E

    RAM: 4 GB


    You will probably need to communicate with the computer of the Mfr and the developer of the card USB 3.0 to see whether there is a newer (patch or beta) driver.

    Without a kind of diary, there is not a lot, we can help you.  The driver for USB 3.0 must be dated June 13, 2009 or newer.

    Alternatively, you can try to reinstall the USB driver in compatibility mode,

    If you want we can take a look at your Event Viewer logs

    Please provide us with your administrative Event Viewer logs by following these steps:

    Click on Start Menu
    Type eventvwr in the find programs and files (do not hit enter)
    Click with the right button on eventvwr.exe and click Run as administrator
    Expand custom views
    Click the administrative events
    Right-click Administrative events
    Record all events in custom view as...
    Save them to a folder where you will remember which folder and save it as Errors.evtx
    Go where you saved Errors.evtx
    Make a right click Errors.evtx-> send to compressed (zipped) folder of->
    Download the .zip to skydrive or a file sharing service file and link to it in your next post

  • Premiere Pro and Media Encoder crashing when exporting since the upgrade to 2015

    I need to get a story out today and I can't export. Whenever it blocks 3/4 of the way through. Same thing with me. Read all the forums and trying different solutions - thought should autosave, I get an error since the update whenever it saves automatically-, but will have turned this off & still crashed. My MAC is 3 months and to spec. Please someone make me know that if there is a solution - I can't open the 2014 project and am out.

    Hi Liz,

    Have you tried to disable the GPU acceleration?

    Can you please provide more details on your hardware specifications?

    Thank you


  • Apple Apps Pro not usable since the last installed updates


    On 19 December 2015 the following has been installed on my computer: 1) 2015 update security-006 version 1.0.  (2) Itunes version 12.3.2. (According to the App Store update page; this one was installed twice).

    Computer has begun to install updates automatically while I was working on a track. I chose to not not to allow the computer to restart and led updates to continue at a later date.  I finished work, off the Mac til the next morning.  When I tried to work, suddenly LPX operates now that it has a weight of 1000 live births by dragging it down.  CPU and HD m remain lit all the way to the top and take a long time to calm down.  Sound level meters don't update in real-time and data audio and midi will be properly synchronized.  I hear a blurry/airy sound on the left stereo channel (it looks like warp any) during audio playback as well. Tried rebooting, shutdown/restart etc... Disk utility says no problem detected.

    Any thoughts?


    Logic Pro X, OS X Yosemite (10.10.5), Symphony TB 16 x 16, ExpressXT Midi

    Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

    Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

    Isolate a problem by using a different user account

    If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

    Safe mode - subject

    Safe mode - Yosemite

  • A5F92AV: Connection issues in my computer since the last Windows Update.

    Since my last update of Windows 10, I can not connect to my computer, I have to connect to my Microsoft account to use my computer. How can I restore my computer?

    Hello @gammy7,

    Welcome to the HP Forums!

    I read your message and understand that the connection is different on your HP Pavilion dv7t-7000 after an update of Windows 10. I'm happy to help you with this problem. First of all, please perform a reset.

    Microsoft - Get Started with Windows 10

    Microsoft - Help on behalf of Microsoft

    To change your notebook to a local account, identify yourself, follow these steps:

    1. go into "settings".

    2. go into 'accounts '.

    3. Select "change your picture account profile settings.

    4. choose "sign with a local account instead.

    5. fill in your current password and then click "Next".

    6. Enter Local account information and then click "Next".

    7. click on "sign out and finished."

    Thanks, I look forward to your response with the result.

    If this post helped you, show your appreciation by selecting the thumbs up!

  • Since the last critical update, cannot access internet unless I have the restore of the system

    After the last update critical (about a week), I have to restore the system to access my internet provider. Updates are automatic, so everyday that my updates install and every day I do a system restore.

    I ran the resolution of problems and it did not work.  I hide the update, the computer restarts and the rest updates worked and I have no problem with access to the internet.  Thanks for your help.

  • Can't access Photoshop CC (2014) since the last major update

    Adobe Photoshop CC 2014 - Oct 13, 2014.png

    Since the new update, I can't access Photoshop CC (2014). I always get a window message:


    I have no problem with Illustrator and InDesign, only with Photoshop CC (2014).

    Should I uninstall and install it again? Well I still have an older version, but prefer to use a new.

    I work on an important project, not really have time to investigate. Any HEP would be appreciated.

    Thank you.

    Have you tried to update the graphics card on the machine? If this isn't the case, please have the updated driver graphics card and try again.

Maybe you are looking for