iTunes does not recognize my ipod nano

iTunes does not recognize my nano after the interview there.

What 'maintenance' has been done for her?  What was the problem that required it to be repaired?

If possible, try another USB docking cable to rule out a defective as cable being the cause.

When you connect it, look at the screen of the iPod.  He said 'do not disconnect' or 'Connected' or give an indication to be connected?   Or does only show the symbol of battery?  Or not it reacts at all to be connected?

Tags: iPod

Similar Questions

  • iTunes does not recognize my ipod touch but my pc it shows as removable disk

    iTunes does not recognize my ipod touch but my pc it shows as removable disk

    First of all:

    iTunes: fix iPhone or iPod not detected Windows 10

    Then, try

    iPhone, iPad, or iPod not recognized in iTunes for Windows

    -I would like to start by

    Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

    or

    Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

    -New cable and another USB port

    See also:

    iPod not recognized by iTunes windows - CSA

    Troubleshooting problems with iTunes for Windows updates

    -Try on another computer to help determine if a computer problem or iPod

    NOTE: you need iTunes 12.3 and in need of Win 7 or a later version.

  • my pc does not recognize my ipod nano

    my pc does not recognize ipod nano

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  • my itunes does not recognize my ipod

    I have an old gen 2 iPod Touch and a GN 6 iPod Nano and iTunes does not recognize. The computer shows that the iPod is connected. I tried to reinstall iTunes and it did not help at all. Help!

    Sarina

    Try the following:

    1. Open Control Panel > Device Manager
    2. Plug in your device
    3. Locate Universal Serial Bus Controllers > Apple Mobile Device USB Driver
    4. Right-click and select software update of the driver...
    5. Click Browse my computer for driver software
    6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
      C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
    7. Click on let me pick from a list of drivers for devices on my computer
    8. Click on Apple Mobile Device USB Driver
    9. Click Next, then close and exit the Device Manager

    TT2

  • iTunes does not recognize my ipod since last update 12.3.2.35.

    I recently upgraded to El Capitan 10.11.3 and updated iTunes to 12.3.2.35.  Now iTunes doesn't recognize my ipod Nano 4th generation.  What should do?

    Thank you.

    In addition, iPhotos opens when I plug in the ipod that never used to happen.  I really don't use it for photos, but at least iphotos recognizes it.  Thank you.

  • iTunes does not recognize my iPod or my iPhone. And nothing worked I tried. I have the latest version of everything. I uninstalled and reinstalled my iTunes. I restarted my iPod and phone and your PC severally. And I tried every single USB ports.

    Yesterday I gor the latest version of iTunes, but it does not recognize my iPhone or iPod. So I put them both to the latest iOS update. He still does not recognize my device. I upgraded Windows 10 because that's what one of the websites I visited told me to do. But it is still worse. Now my PC says that it does not recognize the USB when I plug my iPhone or iPod, but something always pops up asking what I want to do with my camera. I have uninstalled and reinstalled iTunes and even my Apple device Service. I tried practically everything that is currently on the Internet. I just don't understand. Please help me.

    Try the following:

    1. Open Control Panel > Device Manager
    2. Plug in your device
    3. Locate Universal Serial Bus Controllers > Apple Mobile Device USB Driver
    4. Right-click and select software update of the driver...
    5. Click Browse my computer for driver software
    6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
      C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
    7. Click on let me pick from a list of drivers for devices on my computer
    8. Click on Apple Mobile Device USB Driver
    9. Click Next, then close and exit the Device Manager

    TT2

  • Media Player 11 does not recognize the iPod nano

    I have Media Player 9 installed on my Windows XP computer. It didn't recognize my iPod Nano. I downloaded MP 11 - still, there is no recognized my Nano. I don't see an ' Add' button when I click on Tools_Options_Devices, so I can't understand how to add it in. Help, please!

    the iPod is not compatible with WMP, the only way is to download iTunes and do it this way.

    I had the same problem.

  • iTunes does not recognize his iPod

    My wife's IPod is not recognized by its [Windows] iTunes.  iTunes shows no device.  I do not see how to add the device - if I plug in the camera to the laptop, nothing happens.  I guess there is a simple answer, but I do not consider the research of this area.  Thanks for any help.

    This link may be useful:

    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support >

  • iTunes does not recognize my nano

    iTunes does not recognize my nano when connected to my pc

    Hi kaciej0nes,

    Thank you for using communities Support from Apple.

    I see that your iPod nano is not recognized by iTunes on your Windows PC.  In order to get this issue resolved, I suggest that you perform the steps described below.

    Connectivity/synchronization

    Follow these steps if your computer does not recognize your iPod or you have problems with your iPod synchronization.

    iPod not recognized by iTunes or computer

    Make sure that you have installed the latest version of iTunes from www.itunes.com/downloadssoftware. Try connecting to another USB port on your computer. Your computer needs a USB 2.0 port or a USB 3.0 port to connect the iPod nano. If you have a Windows PC that does not have a USB 2.0, in some cases, you can buy and install a USB 2.0 card.

    • If the iPod nano is connected to a USB hub, try to connect the iPod nano directly to the USB port of your computer.
    • iPod nano may need to be reset. Reset the iPod by holding down the sleep/wake button and the Home button until you see the Apple logo appears.
    • If you connect iPod nano to your laptop using the lightning cable, connect the computer to a power outlet before connecting the iPod nano.
    • Check the cable connections. Unplug the cable at both ends and make sure that no foreign objects are in the USB ports. Then reconnect the cable.
    • Try reseating the connector of lightning in the iPod. Lightning connector can be inserted in any event.
    • Try restarting your computer.

    If none of these steps resolve the problem, you may need to restore the iPod nano software.

    Also see the following for assistance:

    iPod nano (7th generation): hardware troubleshooting

    Take care.

  • Windows does not recognize iPhone/iPod devices

    I tried to add music to a new iTunes library to my iPhone on my pc when I accidentally pressed the notification "do not trust this computer."

    I tried following the advice in this thread (removed the pilot): I accidentally hit "Do not trust" and now my iPhone won't sync to my computer. It won't ask me to trust him again even when I restart everything. Now what?

    And now my computer does not recognize my iPod or my iPhone when I plug it into the USB ports. They don't even charge. I know with certainty that the problem comes from my pc because when I plugged them both in another pc, Lesmanteaux both able to connect to the computer/iTunes. I tried restarting both devices, tried resetting the location and privacy, by restarting the computer, even performed a system recovery.

    When I go to "Devices and printers", the two devices are listed under Unspecified, Apple Mobile Device USB Driver, unknown category, troubleshooting needs (I tried that as well, when I do that it is said that all driver software is up-to-date)

    Driver status: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

    All my software is up to date (iPhone, iPod Nano, Itunes 12.1. (2. 27 64-bit)

    Please help me, I've got a flight tomorrow and all I wanted was to upload music.

    Have you tried using different USB ports? Try and see if it triggers the question "confidence." You can also give your iPod a restart is forced. Press the sleep and home for about 20 seconds. When you see the silver Apple, let go and let it reboot, then try again.

    If this does not work you can try something a bit more drastic. That's a lot of time, but not horrible. I had to do a few times with my devices and my computer.

    Try this, go to your control panel, add/remove programs.

    Remove iTunes (you won't lose any content not the program, I've done a few times), Mobile Apple, Apple Application Support device driver.

    For good measure, you can restart your computer just to remove the cobwebs.

    Then come out and redownload iTunes and reinstall it.

    Plug your iPod in and drivers must be reinstalled.

    All of your old info should be there. I've never lost anything. Essentially to remove iTunes and drivers have to reinstall fees, which can remove the obstacle 'I don't trust you. "

  • 12.5.1 iTunes does not recognize the connected device

    iTunes was working fine yesterday, the computer recognizes the device and managed to make a back-up. Put current iTunes 12.5.1 and now iTunes does not recognize that a device is connected. The computer recognizes that a device is connected, it is a device of trust but not iTunes. Even in the file menu, devices is not available. All the USB drivers are up to date and used 3 different usb cords.

    Current iphone OS 10.0.2

    Windows 10

    Hello

    Check this help page: If iTunes does not your iPad, iPhone or iPod - Apple Support

  • iTunes does not recognize my phone

    iTunes does not recognize my phone

    See the troubleshooting steps in this document support. If iTunes does not your iPad, iPhone or iPod - Apple Support

  • iTunes does not recognize my iPhone 6

    I updated iTunes and my iPhone to the latest updates (iOS 10 and all that is the iTunes one) and iTunes does not recognize my phone, but my computer recognize (I have a HP envy with Windows 10). I tried everything that looks like finding the Universal Serial Bus thing and turn off my limitations and download and redownloading iTunes. I did the thing were I updated my driver on the computer and nothing has worked. I don't understand why it does not work. I can't even synchronize with iTunes via Wifi, it just does not appear. Someone please just help me please

    Hi BrittLeighCass,

    I understand that you are not able to get iTunes to recognize your iPhone, now that you have updated your iPhone to iOS 10. That you have described here some quite impressive troubleshooting in-depth. Fortunately, however, it may well be a few additional things to try in this situation.

    First of all, let's make sure that iTunes is completely up to date: iTunes - download iTunes

    If the update to iTunes is not your iPhone appears, see if there are all the steps described in the article below that you do not have covered still.

    If iTunes does not recognize your iPhone, iPad, or iPod
    https://support.Apple.com/en-us/HT204095

    See you soon

  • ITunes does not recognize the device

    My I tunes does not recognize my I pad or I phone. There's no problem on another computer. I tried to remove Itunes and reinstall, but no avail. Computer is windows 10

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  • iTunes does not recognize any of my iPhones (Windows 10)

    I've recently updated iTunes 12.4 and now my iPhone 5s, and my iPhone 4 are not recognized by iTunes. They appear as 'Apple iPhone' in my file Explorer, but are not accessible via iTunes or iFunBox. I tried all the options in the management of the link here:

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

    I removed the lockdown folder.

    I tried several cables.

    When I go into Device Manager, there is no "Apple Mobile Device USB Driver" under "In Bus USB controllers", but there is 'Apple iPhone' under 'portable '. If you're looking for an update to this pilot says 'Windows has determined the driver software for your device is up-to-date' "MTP USB device".

    More interesting still, I went down to iTunes 12.1.3, thinking that would take me back to a working version, but in fact it STILL does not recognize my phone(s)!

    What the hell is happening?

    If your iOS device does not appear in iTunes, try the following:

    1. Open Control Panel > Device Manager
    2. Plug in your device
    3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
      It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
    4. Right-click and select software update of the driver...
    5. Click Browse my computer for driver software
    6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
      C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
    7. Click on let me pick from a list of drivers for devices on my computer
    8. Click on Apple Mobile Device USB Driver
    9. Click Next, then close and exit the Device Manager

    To step 3 above, open the Device Manager. Expand one of the articles that are listed.

    • USB Bus controllers
    • Imaging devices
    • Portable devices
    • Other devices

    Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

    Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

    If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

    Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

    TT2

Maybe you are looking for

  • Satellite P300-133 reboot at the same time every night

    Hi all Since 3 days ago, the laptop restarts always in the minight about 03:00, two weeks ago, I bought new laptop satelliate P300-133does anyone have the same problem like this?I do not think the problem of the machine, because the problem is 3 days

  • I need Microsoft XP SP.1 for my new hard drive

    Grandson PC crashed into the hard drive with it. I couldn't make it work. Bought the new hard drive and reinstalled the original Windows XP, but it did not upgrade to Service Pack 1 with it. I can't find it on the web site of MS and could not get the

  • Problems with Windows Installer after using System Mechanic.

    I had a problem with my Dell 2 years and was told by the Support Dell buy iolo System Mechanic. However, now I have problems with Windows Installer (it is not installed correctly) and I've read that this can be caused by the registry cleaner in the i

  • How can I upgrade my windows 7 Home Basic license to windows 8 pro?

    Dear Sir. I have a laptop Lenovo G-570 with the basic House under license of windows version 7. I got to know that Microsoft allows people who have a windows license 7 in laptops it can be upgraded to windows 8 in only $ 18. I have 64-bit windows 7 a

  • Cannot install SnagIt on 64-bit Windows 8

    Hello I tried to install SnagIt on several attempts, but I'm unable to install on my laptop. I use a full version of 64-bit of Windows 8. The laptop is barely a month. When installing the .exe is to give the option to select the language, I chose Eng