iTunes does not start after upgrading to version 12.1.3.6

Help! I use widows 10, 64-bit, and my itunes will start after you updated to version 12.1.3.6. Error message: iTunes did not work corectly due to a problem.

For general advice, see troubleshooting problems with iTunes for Windows updates.

The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. (Yes, I see that you've done that but maybe not the specific deletions which are mentioned).

Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

TT2

Tags: iTunes

Similar Questions

  • FF does not start after upgrading to version 27.0.1

    FF does not start after upgrading to version 27.0.1
    Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

    Firefox 27.0.1 is too recent for me to know what unique issues it may have. I will message you a link to download the installer for Firefox 27.0 to see that the inversion or not the problem.

  • ITunes does not start after the installation of Windows 10

    ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

    Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

    Solution, according to this link, is:

    If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Re: Smoker L30-10 X PSL33E does not start after upgrading RAM

    Hello

    I have a problem with my laptop.
    It has 1024 MB of RAM (2 x 512), but it wasn't enough, so I decided to update to 2048 MB (2 x 1024).

    I bought two modules and my computer does not start after changing them.
    It was only a screen black (same BIOS has not started). I tried another combination of installation of memory modules RAM.
    2 x 1024 - did not work
    1 x 1024 - did not work
    1 x 1024 + 1 x 512 - working but not properly.

    BIOS find that I only 896 MB (1024-128 for the video card)
    I said OK. Let's see what will show windows. He was also 896 MB.
    I launched CPU - Z and it shows that the total size of memory is 1536 MB (medium detect both modules).
    I found that CPU - Z detect 1 module 1 024 MB and 512 MB secondary, but the BIOS detect only 1024 MB 1536. How is that possible?

    I have fought, is that my BIOS is old, then I update the toshiba Web site form most recent version, but the problem persists.
    Please someboy help me and tell what to do.

    PS. the Modules are new and work correctly.
    They have been tested.

    Hello

    Have you used two identical RAM modules?

    What kind of modules did you use?

    In my view, that the problem is related to the new, inserted modules.
    There must be something wrong with the modules or modules are not completely compatible if the laptop can not boot after installation.

    According to a few pages of the book handles the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM modules.

    Did you use these modules?

  • Satellite A200 PSAEOE does not start after upgrading memory

    Hi, I am first time here.

    I bought a Toshiba A200 PSAE0E-03J02JDR with 2 GB of RAM. I bought a pair of ram Corsair (2 * 2 GB VS2GSDS667D2). The computer does not start after that I installed the memory. I have intel 945 chipset, which is capable of 4 GB (manual page 1-2). The bios version is 1.8 2007.

    Can anyone help me, please.

    Post edited by: Marian ovidiu

    Hello

    The A200 series supports different chipsets;
    Intel 945 PM
    Intel 945GM
    Intel 943GML

    As far as I know your laptop supports the * 943GML * Intel chipset and the chipset supports 2 GB RAM max.
    Take a look at your laptop s user manual * Page 18.*

    Summer: 4 GB of RAM are not possible, and therefore your laptop does not start.

  • Satellite P200D-130 does not start after upgrading RAM

    Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
    I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
    Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.

    I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
    I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.

    What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?

    Thanks in advance,

    Michael

    Hello!

    I think that both modules are not compatible to the laptop.
    Normally you can upgrade your laptop to 4 GB. Look in the user manual.

    The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.

    Good bye

  • X 240 does not start after upgrading to the latest version of the bios

    I bought windows 8.1 factory machine. Then I had the local store install 8.1 on larger ssd. I did just last update of the bios, and now the machine does not start. I'm sure it is bound uefi, but I'm not knowledgeable in this area. The start setting me back by the store was 'only legacy' and secure boot has been disabled.

    It is resolved with a replacement of the cable on the SSD and the system board.

  • listener does not start after upgrading clusterware

    Hello. RHEL 5, updated the clusterware 10.2.0.5 RAC to version 11.2.0.4 grid (database version is always 10). After the reboot, a node is OK, but on another auditor does not start. If trying to run manually, it starts with the error "the listener supports no services". After comparing with another node, it seems that 'bad' node uses old file listener.ora, which is now 0 bytes (probably was allowed during the upgrade):

    $lsnrctl start
    LSNRCTL for Linux: Version 10.2.0.5.0 - Production on 12 March 2014 09:37:16
    From /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: Please wait...
    ...
    System settings file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = rac - 2)(PORT=1521)))
    ...
    The listener supports no services ".

    where/u01/app... - is my home, the home grid is in / U02 oracle. On another node, listener starting grid House. I checked the Setup log and found no errors on the listener. What can I do to fix this?

    You need to check first, which is not running and why (. / crsctl res stat - you), a lot of resources are dependent on network net1. Start by watching clusterware alertlog and check the config network of the second node. If the basic config is very good, you can try with netca or command line (oifcfg, iflist,...).

  • First HP: HP first does not start after upgrading firmware 20160414

    Hello world

    Yesterday, I tried to update the firmware of my first HP as the connectivity kit he advised. Now, the first does not start.  The only way I can get it to do something, is pressing the Symb key and reset at the back. It then enters the V16 recovery mode.

    I am able to download the firmware, but after that it just does not start.

    I have reinstalled the kit connection several times.

    I used the option "use the new method of update" in the connectivity kit. But it won't help. I tried to download older versions of firmware.

    I tried the factory reset options: A, F, key simmultaneously O and then with the reset on the back

    I tried the Apps, Esc, now.

    It just does not start.

    Any suggestions anyone?

    With sincere friendships.

    Sigurd

    Ziggy76 wrote:

    Hello world

    Yesterday, I tried to update the firmware of my first HP as the connectivity kit he advised. Now, the first does not start.  The only way I can get it to do something, is pressing the Symb key and reset at the back. It then enters the V16 recovery mode.

    ...................

    It just does not start.

    Any suggestions anyone?

    The suspect first IMO is win10. You are a brave man to make an update based on win10. Try to do this on a computer with 7 or 8.

    Some on this forum may say they made a correct update of the firmware with 10 victory.

    However, to win 10 is known to his problems with the drivers and the software which is not original ms or not correctly connected.

  • Thunderbird does not start after upgrading 38.2.0

    There was no message that update failed - not open - does not restart after you send crash report.
    Crash report:
    AvailablePageFile: 7213977600
    AvailablePhysicalMemory: 2086785024
    AvailableVirtualMemory: 4146671616
    BlockedDllList:
    BreakpadReserveAddress: 47185920
    BreakpadReserveSize: 67108864
    BuildID: 20150813074416
    CrashTime: 1440425027
    E-mail: [email protected]
    InstallTime: 1440383185
    ProductID: {3550f703-e582-4d05-9a08-453d09bdfdc6}
    ProductName: Thunderbird
    ReleaseChannel: press release
    SecondsSinceLastCrash: 151
    StartupTime: 1440425018
    SystemMemoryUsePercentage: 75
    Ramjet: 1
    TotalPageFile: 17159360512
    TotalPhysicalMemory: 8580620288
    TotalVirtualMemory: 4294836224
    URL:
    Seller:
    Version: 38.2.0

    Thanks for posting your ID numberes accident, which can be found using https://support.mozilla.org/en-US/kb/mozilla-crash-reporter-tb#w_viewing-crash-reports

  • Tecra A11 - 11N does not start after upgrading CPU

    Hello

    I would like to do an upgrade of the processor for my Tecra A11 i5 - 430 M 11N to a probably much faster i5 processor. I thought that the i5 - 580 M'd, but the laptop does not start when I installed this processor.

    I started the 430M, done some research on the internet and discovered that the 580 M has a very high FSB speed, and that is what probably does not work / not compatible with my machine.

    http://Ark.Intel.com/products/43537/
    http://Ark.Intel.com/products/49653
    http://Ark.Intel.com/products/49652

    and also http://ark.intel.com/

    Now, I went back to the computer store, returned the 580M and got an i5 - 560 M compared to its specifications as I've seen it would not compatible because it has the same speed of the FSB with the 430 M.

    I then later in the day tried to install this cpu as an upgrade, BUT alas!
    It STILL does not START ALSO.
    I was dumfounded left. The processors in the same line of the family are supposed to be compatible between them provided: lithography, FSB and socket type are similar.

    Or what I'm missing here?
    I did upgrades of CPU in many cases for desktop computers and laptops, and this is the first that has left me with no word to say!

    Please offer assistance or advice.

    Simon

    + The message has been modified.

    Hello

    Recommend to check this doc from Toshiba:

    + Can I put th CPU, screen, or motherboard in my Toshiba laptop? +
    http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

    Upgrading the CPU is not supported (officially).
    The point is that, even if the chipset would support the new processor, it would be possible that the laptop wouldn't start because of compatibility problems between the BIOS or other components on the motherboard and the new processor.

  • Satellite L670-1EE does not start after upgrading RAM 4 GB to 8 GB

    I'm trying to upgrade the RAM from 4 GB to 8 GB. If I replace two 2 GB of 2 modules of 4 GB modules, the BIOS (which is the most recent) realize the 8 GB, but does not start at startup. There is just the white cursor blinking not.

    When I put in the 1 4 GB module and 1 2 GB module the system starts without a problem and has 6 GB. I checked the two 4 GB modules, they work in any combination, but not when both are installed together.

    I couldn't find any rider or the settings of the bios for the RAM...

    Any idea?

    Thanks in advance for the help

    The last plausible explanation is that both modules are ok, but not compatible with each other.
    The laptop can be upgraded up to 8 GB of RAM. This should not be a problem since the unit is supported by the Chipset Mobile Intel HM55 Express.

    So I think that you need to replace the modules Kingston modules are great and work without problem.

  • Satellite L100 113 does not start after upgrading memory

    Hello.

    Our Integrator bring to our company KVR800D2S5, but laptop memory modules does not start :(

    I read manual - this laptop supports 533 PC4200 memory modules.

    But SO-DIMM 533 MHz will be delivered in one month...

    The memory modules, we can install to Toshiba L100-113?

    Thank you.

    Hello

    I think that the laptop does not power upward because of a barrette memory faulty or not fully compatible.

    Please visit this memory 3rd party:

    [Memory for Toshiba Satellite L100 113 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=22360&ft=m&st=3]

    As you can see Satellite L100 113 memory can be upgraded up to 2 GB (2 x 1 GB) and you must use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM

    Concerning

  • Compaq 6200 PRO MT: Makes the computer does not start after upgrade CPU

    I have the HP Compaq 6200 PRO PC of MT 615114-001 motherboard and processor Intel Celeron CPU (LGA 1155). After I changed the CPU for Intel Core i5 (LGA 1155) computer does not start. He begins a minute (less than one second) and stops again. No beeps. After you have installed the Celeron back everything works fine. i5 CPU is brand new. What can be?

    In my previous post, I explained the reason it has not worked, and listed the CPU that will work.

    HP tests CPU in the laboratory and publishes a list of processors that will work in a notebook.

    Notebook motherboard BIOS has a list of processors that will work. If it is installed, which is not encoded as OK in the BIOS ROM file, then this will not work.

    Processors published (in the maintenance guide & Service for your nttebook series model) are available in models that can be deilvered in State CTO (configured to order).

  • Satellite A60-672 does not start after upgrading memory

    Hello

    I bought an additional memory for my laptop, but after installing it the PC will start is no longer, when I turn it on it makes a brief noise then nothing. After taking the memory expansion out again once, the laptop still does not start.

    Peter

    Hello

    I agree with "guy sos." There is no doubt motherboard problem now. I assume you used the incompatible memory module.

    In any case, contact the after-sales Service of Toshiba partner in your country and explain to them the situation. The address that you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

    Good bye

Maybe you are looking for

  • WiFi satellite 1800

    I have an old Satellite 1800, which I have wireless. I bought a PMCIA card wireless, but found a load of paper screwed up in the PCMCIA ports. I got most of the paper, but now a couple of pins are bent. I did not go to a computer store remains to be

  • Switching between 2 string values

    It is probably a trivial question, but how to move between 2 string values to send to an entry of a larger chain of concatonated function. The values need to be changed every 100ms or so. Thank you mhaque

  • I get a svchost.exe. application _ error help me please

    I get the following error in the demand for the svc host.exe The instruction at '0x00cd96bc' referenced memory the to "0x00000000x". "»  Memory could not be "written". Click OK to terminate the program Click on CANCEL to debug the program OK CANCEL n

  • SSRS 2005: Delay in opening a report in Adobe

    SSRS 2005: Delay in opening a report in Adobe (export as PDF on the place) A lot of time to open a report in Adobe - more than 5 minutes. With IE9 - Download pane displays ' running safety analysis... » With IE7 - The download window is waiting. Fina

  • OfficeJet Pro L7780: HP Solution Center

    I see I'm not the only one having this problem since the day of security Windows on Janualy 4, 2016. I executed issued alerts here to support.Basically what happens is that I can open the Solution Center, but when I try to open either Photo or Docume