iTunes does not start. How to remove iTunes completely?

Similar Questions

• Have two black stripes on the right and left of the screen making it my screen more small and does not know how to remove them permanently.

  Problem with the screen!  Have two black stripes on the right and left of the screen making it my screen more small and does not know how to remove them permanently.  Can someone help, please step by step details.  Thank you.  Have Windows7!

  Original title: screen

  Looks like a monitor / setting screen. Horizontal and vertical positions may need to be adjusted in the monitor buttons. Another possibility is that the display resolution is not optimal.

• Laptop does not start > how to delete data

  Separated from this thread.

  How can you get your data off when the laptop does not start again? "catch fire or explode"... in a suitcase on a train or plane? This sounds like a product ready for the market yet? More I explore this question of "overheating" in the line it worse it seems: my machine was like a hot plate not a laptop when it has been completely unfolded in a cool room: about right to mention briefly without getting hurt. (And my data is still inside of her, if it is not melted...)

  Well, unlike a laptop where you can remove the hard drive, these tablets are pretty well fixed and specifically your case, (it will not explode or catch fire) is to locate the device next to an air conditioner or a blowing unit to blow fresh air into the vents.

  At this point, press on and hold the volume button upwards and at the same time, press and hold the power button for about 15 seconds, then release it.

  If you can get it to feed and at least screen troubleshooting, see if you can get the machine to run in safe mode.

  If you can get to the desktop, you can down all your data by opening the file manager, click on 'This computer' and open the 'users' folder, go to your account name folder and copy all the files on a USB key.

  It is the only way to get your data out of these tablets.  You can't have the SSD card to remove it to try to force the machine to run at least once.

  Now, I think that your machine is still active, just overheating.  Get off in any case data.

  A RESET and reinstall updates are the only thing you can do.  I have the i3 model myself and am on it now and no problems with it.  Some games will heat, but never to the point that everyone is a report.

  If all fails, send the replacement machine.

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• WebCache does not start - how to set logging - could not start and run...

  Can someone tell me how to set more detailed logging webcache / opmnctl? The log file, the error does not show anything. I guess I need to change the webcache.xml of the file but do not know the values that I should enter.
  
  This seems to be a common problem. To be exact, I am doing an installation of Oracle Grid Control and this error occurs.
  I worked on it for the last two days and seems to hit a dead end.
  
  I got the solution from changing permissions webcachectl with the same results. I also change the owner to root and tried. Same mistake.
  root @ bin # ls-l
  3508 total
  -rwx - 1 oracle oinstall 16802 Jun 27 11:27 webcachectl
  -rwx - 1 oracle oinstall 3562649 Jun 27 11:27 webcached
  -rwx - 1 oracle oinstall 4651 Sep 2003 29 webcache_setuser.sh
  
  root@hostname bin #./webcache_setuser.sh setroot oracle
  The ORACLE_HOME environment variable is not set.
  Set ORACLE_HOME and redemarrez./webcache_setuser.sh
  root@hostname bin # export ORACLE_HOME = / home/oracle/OracleHomes/oms10g
  root@hostname bin #./webcache_setuser.sh setroot oracle
  
  setRoot task completed successfully.
  
  root @ bin # ls-l
  3508 total
  -rwxr-x---1 oracle oinstall 16802 Jun 27 11:27 webcachectl
  -rwsr-x - 1 root oinstall 3562649 Jun 27 11:27 webcached
  -rwx - 1 oracle oinstall 4651 Sep 2003 29 webcache_setuser.sh
  root @ bin #.
  
  INITIAL ERROR
  
  IAS-component Oracle@hostname webcache$ / home/oracle/OracleHomes/oms10g/opmn/bin/opmnctl startproc = WebCache
  opmnctl: from opmn managed the process...
  ================================================================================
  opmn id = hostname:6201
  0 out of 2 process started.
  
  IAS instance-id = EnterpriseManager0.hostname
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  IAS-component/process-type/process-set:
  WebCache/WebCache/WebCache
  
  Error
  -> Process (pid = 19983)
  Cannot start a process managed after the attempt limit maximum
  Journal:
  / Home/Oracle/OracleHomes/oms10g/opmn/logs/WEBCACHE ~ WebCache ~ 1
  
  IAS-component/process-type/process-set:
  WebCache/WebCacheAdmin/WebCacheAdmin
  
  Error
  -> Process (pid = 19976)
  Cannot start a process managed after the attempt limit maximum
  Journal:
  / Home/Oracle/OracleHomes/oms10g/opmn/logs/WEBCACHE ~ WebCacheAdmin ~ 1
  
  Webcache Oracle@hostname $
  
  Contents of/home/oracle/OracleHomes/oms10g/opmn/logs/WebCache ~ WebCache ~ 1
  Oracle Application Server 10g (10.1.2) Web cache
  Copyright (c) 1999, 2005, Oracle. All rights reserved.
  
  06/09/28 08:34:49 launch
  Oracle Application Server 10g (10.1.2) Web cache
  Copyright (c) 1999, 2005, Oracle. All rights reserved.
  06/09/28 08:34:51 launch
  
  Thanks in advance
  SG

  It is not taken in charge supported. Please check the certification metrix in the metalink.

• Utility profile WLAN does not start after the removal of some tools from Toshiba

  Here, I would like to say that Toshiba software (utilities, entering in laptops) is poor, unstable and mostly useless. I think it makes sense to launch a call to management of Toshiba to stop dealing us with the ugly such software.
  SHAME ON THEM!

  For example: in my new Toshiba laptop utility of LAN/WLAN profile (the program is useful only) did not work. It has not removed after uninstalling some of the Toshiba Utilities, their menu program shortcuts forms and I can also see their icons to the left in the notification area settings.

  In addition, some of the utilities did not start (like Toshiba disc Creator). Also utility Toshiba are very different, poorly described and localized, do not appear in between them and their shortcuts are entwined in the menu of programs with shortcuts to documentation.

  Hey Buddy,

  To be honest I don t understand why people post only the negative side of utilities Toshiba pre-installed you also noticed that they make your (computer) life easier?

  I don t want to count each tool of Toshiba, but they provide useful functions like CD burning, material is diagnosed, assistant LAN/WLAN connection and so far.

  If you don't like it, n no one said that should be used. Uninstall it and be happy with your laptop. :)

  Regarding your problem:
  I put t know why don t tool work harder because you don't l t post the exact name of it, and that the tools you deleted but say you ConfigFree? The program is useful for WLAN/LAN connections then try to reinstall Toshiba page.

• the spooler service does not start how

  When in the properties of the spooler service I did start one here does not and shows me the message error 1503

  Comment do car because of this I cannot use my printer: scan or print

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: (en)

  http://answers.Microsoft.com/fr-FR/windowslive/Forum?tab=unanswered

  http://support.Microsoft.com/common/international.aspx

• CC does not no how to remove

  CC does not

  CC does not

  Hello

  You can use the desktop application uninstaller Adobe CC as well:

  Using creative cloud | Uninstall the creative cloud desktop application

  Kind regards

  Sheena

• Satellite M50D-A-10W does not start after the battery is completely empty

  I have a laptop Toshiba Satellite laptop Satellite M50d-A-10W AMD A, 15.6.

  I have problem when the battery is completely empty I have to use the needle achieve hard reset the switch behind the laptop... so I can't enter in bootmode with f2

  How can I solve the problem?

  Thank you

  I guess you are talking about the shutdown procedure force as described in this document:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  This problem can appear in case the PC freezes, do not start or has a power failure.

  I think that the laptop turns off in case the battery is completely empty. In this case the system does not close properly.
  As the default state, the system keeps laptop but usually the unit carries out a stop of the hybrid. This procedure allows the laptop to start much more quickly, but it could affect the system startup in case something goes wrong during the process of closing.
  You can disable this hybrid mode and in my opinion, it is also recommended.

  Details:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  However, to avoid these problems, it of very important to correctly perform the closing procedure.

• Satellite L650 - operating system does not start - how to set to factory settings?

  Hello folks,

  Basically, my toshiba L650 is dead.
  He returns with a message as windows was able to start etc then takes me a blue screen when, after abouf 10 minutes another box called Startup Repair so even after I left the night did nothing at all.

  I have all my stuff importantish backed up if someone can tell me in simple terms how can I system restore factory settings very appreciated pwease, your jr

  Hello

  Have you created a Toshiba Recovery disk in the past?
  If this is not the case, try the procedure for recovery of HARD drive as described here:

  + How to recover a Toshiba notebook with the HDD recovery procedure.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If HARD drive recovery is not possible, then you will need to order a recovery disc.

  Check this box:
  http://backupmedia.Toshiba.EU/landing.aspx

  Good luck!

• HP G60-126NR: laptop does not start unless that removed the CMOS battery

  I have a HP G60-126NR laptop. One day she was cold stone when I press the power button / stop. I unloaded the mothboard.  I then installed a new CMOS battery. I use the power supply to the power supply adapter. When I press the power button, I get nothing toally dead, except to show the light of connection. If I remove the CMOS battery, then discharge the motherboard again, then plug in, and the portable lights without power button / stop touching and goes into the Configuration screen to access in time. After time, it starts in Windows without a problem. SFC Windows scan shows no errors. If I stop, not sleep, the laptop died again unless I dump the motherboard and start from the square. In addition, I would like to say that when Windows is running, if I close the lid to put to sleep, you can see that the screen is still active despite change 'what happens when I close the lid. My diagnosis tells me that it needs a new motherboard.

  PS: I flashed the BIOS off HP site thinking that it would solve my problem, but it has not...

  The problem has been resolved. The jury of ciruit combination touch pad for power and WiFi was broken and has been replaced. Normal unit operation.

• Satellite 2410-504 does not start after you remove RAM module

  Hello

  I need assistance or advice.

  I have a portable Satellite 2410-504 and I was looking for to increase the memory, I am a Novice with computers, I decided to remove the Module that is already in place (to see if I was capable of employment)

  After removing and then returning the Module, then I went to turn on the laptop and Yes you guessed it, NOTHING!
  The power lights are on and the light comes on but the screen is blank and there are no hard disk activity.

  Now, trying to get back on my actions, I have been unable to completely remove the battery but I'm sure that he slipped on the connectors.
  Could I have caused permanent damage or are my actions retreivable.

  Thanks in advance,

  Mike-c

  Hello

  Did you check if the RAM has been inserted correctly?
  Select this check box.
  But of course, the RAM could be damage due to wrong treatment nothing is impossible
  My computer laptop didn t start because one of the RAM died suddenly.

  What you could do is to remove the battery and unplug the AC adapter.
  Then you have to wait a little (one hour) and need to connect the two parts again.
  Then try turning on the laptop computer.

• Cooling fan does not work - how to remove Satellite L850

  How you delete a L850 Satellite in order to get to the cooling fan and replace it. The cooling fan has become noisy and then stopped working, and now the laptop is turned off as it is too hot.

  It is out of warranty now as well.

  Hello

  Replacement of the cooling fan is a fairly complicated procedure. Any laptop has to be disassembled, and as you probably know, it must be done by authorized personnel only.

  Is the disassembly laptop procedure must be specific to avoid damage. Many plastic parts have a small-scale plastic and if you n t know how to delete some part can be broken. Any dismantling procedure is described in maintenance manuals, but this document is not a public document and cannot be downloaded.

  What to say at this point? You can try to disassemble your machine, but you do this at your own risk. If you n t have experience with what I think this isn't a good idea.

  You know someone who can help you with this?

• Satellite L40 - does not start and the screen is completely blank

  Hey guys,.

  A good friend of mine has a laptop Toshiba Satellite L40, who died recently, and she has not been able to find the warranty documents yet, so I wanted to ask if maybe you could help.

  Basically, what's happened is that one day she was using the computer and not have noticed that it was not plugged in to charge, and before completely lost all power, the computer went into automatic hibernation mode.
  It plugged into the charger, the lights indicated that he was in charge. A few hours later she was trying to turn on, but nothing. the computer itself gives off a sound very low, as if turned on, but the screen is completely blank. She said that it's almost like she couldn't make the thing out of hibernation mode. He continues to give sound and some indicators remain lit until the battery is running out of charge.
  She has Windows XP is installed on the computer.

  Perhaps someone could help as to what is happening here? 1 million thanks!

  ME

  Hello

  Weird, but have you tried to remove the adaptor AC/DC and battery? Wait one hour and then reconnect the adapter AC/DC and battery. Maybe the laptop restarts.

  If this isn't the case, I think that you need assistance from an authorized service provider. It seems to be a hardware problem and the laptop should be checked by a technician from Notepad to determine the cause of this problem.
  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Does not start the web page after completing the configuration

  I have a problem with vCD 5.5.2 running on my lab at home. I made sure that all the prerequisites are met. The cell has been initialized properly without one mistake and I'm still not able to launch web page, no idea why this happens?

  vCD is installed on CentOS 6.x

  I enclose cell.log

  I hope someone can share his thoughts with me.

  Thus, all the cell.log told me is that the service obtained running.

  vCloud-container - debug.log will tell me if there is an error after starting the services.

  If this is a new installation of the OS, the firewall blocks outgoing default HTTPS traffic.  can you try to disable just the firewall for a short time, restart vmware-vcd service, wait for the cell.log to show finished, and then try again?  The firewall is the most common question on the newly installed outside the research forward/reverse DNS is not configured for both HTTPS and ConsoleProxy Treaty.

• Laptop: laptop does not start

  My laptop does not start, how can he?

  Hey,.

  First, a good thing to try is a hard reset of the computer.  The steps are different depending on whether your battery is removable or not.  See http://support.hp.com/us-en/document/c01684768 for steps and videos covering this first easy step.

  If you are still having problems starting to walk through the steps in the troubleshooting online here documents:

  Windows 10 - http://support.hp.com/us-en/document/c04718479

  Windows 8 - http://support.hp.com/us-en/document/c03515402

  Windows 7 - http://support.hp.com/us-en/document/c01443371

  -wes