iTunes does not work on my computer

Similar Questions

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Sound does not work on my computer and the 'secret' is not on. HE WORKS AT HIOME WHEN PLUGED IN MY SPEAKERS... IAM NOT HOME NOW GET OUT ON THE ROADL

  My sound does not work on my computer... It worked when pluged in my speakers at home... I'm not at home so no speakers and I can not get any sound. I checked mute and is not clicked on also the volume upward all the way. What else can cause the sound works do not? Help is greatly appreciated.

  BJ Gawle

  Hi B.J.Gawle,

  Method 1

  Looks like you're using a laptop and this would happen if the default audio device is not set to internal computer speakers.

  (a) open the Control Panel.

  (b) double click on the sounds and Audio devices icon.

  (c) click the Audio tab and under audio playback, select the audio device on the laptop.

  (d) click apply and restart the computer, check to see if it helps.

  Method 2

  If fails it above step then check out the link below and run the Fixit tool available, check if it helps.

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/AudioPlayback/

• iTunes does not work after download

  I'm not able to open iTunes once I loaded it.  I get a message saying that iTunes does not work.  I loaded the latest version 10.5 but doesn't seem to help.

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• No wireless networks not found on laptop - the WiFi windows service does not work on this computer

  Hello

  I have a laptop model Toshiba P205-56347 running Vista home premium and a lynksis WRT54G V8 router model.  The WLAN light is solid and the internet light flashes on the Linksys.  I have Comcast cable as my ISP.

  I've seen reported similar problems.  All of a sudden my wirless acess stopped working, some networks are displayed and I get the message 'windows wireless service does not work on the computer.  I am not able to restart the windows wireless.  I can't connect to the internet on the laptop.  I have a DELL PC and can access the internet here if necessary.

  In the network and Discovery Center, I see that network discovery is disabled.  I can't set it to on.

  Under system devices, I have the following network cards: Intel (r) Wireless WiFi Link 4965AGN and Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS6.0).

  Help, please.  I'd appreciate any help.  I need a good starting point for resolution and wouldn't start using suggestions that corrects other issues.  I design financial systems and purchase online, but I'm not a technical person with regard to updates Vista, drivers, etc..

  Thank you! After reviewing the responses to similar problems, can anyone suggest if I should try one of the following values: 1. run SCF/scannow at the command prompt I don't know what that's going to fix it and do not want to make the current problem worse. 2. download the driver for the network drivers. If you would be grateful if someone could help me find the driver and download it. 3 reinstall Windows Vista Home Premium SP1 since the restoration of Toshiba CD I would appreciate greatly any information. Donna

  Hi blondswede,

  You can try running sfc/scannow to see if you have corrupted files. That won't be a further problem on your pc. After that, you want to make sure you have the latest drivers for your laptop, especially drivers of the NIC (network card). Go to the following link to Toshiba for your model and download those:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=1757721&RPN=PSPB3U&modelFilter=P205-S6347&selCategory=3&selFamily=1073768663

  If you're still having problems, and it has recently emerged as a problem, you can try to restore your system to a point in time before the problem started to use the system restore. Here are the steps to follow:

  • 1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    2. In the System Restore dialog box, click on choose a different restore point and then click Next.
    3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. Click Finish.

    The System Restore tool

    If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    To restore the operating system to an earlier point in time, follow these steps:

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know how it works and if you need additional assistance.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why any screen recorder does not work on my computer? __

  Why any screen recorder does not work on my computer?

  Hi I formatted my computer and downloaded all the conditions for this, I downloaded hypercam and installed, I tried to open it in the tool bar and the start menu, it still does not work.
  I downloaded another program for recording of the screen, it also did not work, I tried 3 programs, they all did not work
  by the way my computer: windows vista service pack 2 and the screen recorders have worked before I formatted my laptop
  I need a solution pleaseeeeee

  I got this error in the three programs

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: ScreenVCR.exe
  Application version: 1.5.34.0
  Application timestamp: 2a425e19
  Fault Module name: StackHash_b4c3
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000096
  Exception offset: 02e42a3b
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: b4c3
  More information 2: d2a8bebd21e0e9bfa99e084d53ece2b6
  3 more information: 74a 3
  Additional information 4: 0480b6e0a2e7a1df44ee618ae8d0084f

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Please give me a solution... :(

  my laptop computers Info

  Windows is Windows Vista Home Premium
  Intel (r) core (TM) 2 Duo CPU 26500 2.10 GHz
  3.00 GB RAM
  Mobile Intel (r) 4 Series Express Chipset Family

  =============================================
  Just a thought... maybe your video driver or DirectX needs and update?

  Have you tried the following applications:

  (1) Windows Media Encoder 9 Series
  http://www.free-codecs.com/download/Windows_Media_Encoder_9_Series.htm

  Direct Download Link:
  http://www.free-codecs.com/download_soft.php?d=571&s=327

  First steps with screenshot
  Using Windows Media Encoder
  http://www.Microsoft.com/windows/windowsmedia/HOWTO/articles/ScreenCap.aspx

  (2) Microsoft Expression Encoder 4
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=75402be0-C603-4998-A79C-becdd197aa79

  Expression Encoder training videos
  http://expression.Microsoft.com/en-us/cc197144.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My webcam does not work on my computer

  Hello

  I have a problem with my webcam, it does not work on my computer, the Info:

  first is my OS: Windows 7 Professional 64-bit Edition.

  The problem:

  First when I installed the driver for the webcam on what he asks me to plug the webcam when it tells me the model that he asks me to support next it goes perfect until it reaches the stage where you have to use the cam, and it is said that the cam is not connected to the computer, although it is firmly connected and I finish the wizard to skip the "take a photo" and used the software which was attached with the webcam but when even the webcam does not work.

  What I tried:

  1 restart.

  2. check the Device Manager.

  3 - reinstall the programs tied up with the webcam.

  4. get the latest drivers for the webcam and re-install the drivers.

  5. try different USB hubs.

  6 and finally change the webcam.

  But even the webcam does not work, this webcam, any webcam.

  Note: When I plug the webcam into a new USB hub, the led of the webcam and the 'new device driver software installation"will, but when the bubble"the software device driver has been installed successfully"pop the LED goes out and even got upgraded to 4 different USB hubs.

  I need your help.

  Thank you

  Best regards

  Hello

  You can try the suggestions below and check if that helps.

  Method 1:

  Try to run the software of webcam as an administrator and check what is happening. To run it as an administrator

  (a) access to the location of the installation file

  (b) right click on the same

  (c) select run as administrator

  (d) follow the instructions and check if that helps.

   

  Method 2:

  If this does not help, you can try to disable (UAC) user account control temporarily and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Note: It is not recommended to disable UAC. However, it is your choice on how you want to run your computer. In addition, activate once you have completed the troubleshooting steps.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SideWinder X 4 does not work with my computer

  Original title; SideWinder X 4

  I can confirm that the keyboard works with other computers, but the keyboard does not work with your computer and with which I intend to use it. The keyboard works in the BIOS and turn on until at halfway through the Windows startup animation and then turns off and unresponsive. I have the drivers installed on the site, but the keyboard does not work, and Device Manager reports the missing pilot. The problem told to install a driver, but this utility is unable to find a driver.

  Steps to try to solve this problem, I took:
  Uninstall, reinstall

  Keyboard to use free software (still doesn't)

  Install the version 8.x from the site

  Any suggestions?

  Configuration:
  Windows 7 Professional 64-bit with the latest windows updates

  Intel Core i7 860 2.8 GHz

  8 GB RAM

  EVGA Nvidia GTX 460

  Hello

  Put the computer to boot and check which application third party is added to the element start and the origin of the problem:

  http://support.Microsoft.com/kb/929135

  Note: follow step 7 to restore the computer to a normal startup.

• Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt

  Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt. The same is not solved.

  I'm unable to locate networks wireless on my Windows 7 PC. Help, please.

  Try to uninstall/reinstall the drivers for your wireless network. You should be able to get them from from Toshiba Web site.

  I hope this helps.

• "The cutting tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.

  The error message "the snipping tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.  However if I select snipping tool in the menu start nothing happens at all.

  Original legislative:

  M.

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• I would like to stop my paid subscription to Adobe, the creative cloud because adobe does not work on my computer. In addition, it is not possible for me to stop my subscription on the site, because it does not show I have this subscription. That's why I

  I would like to stop my paid subscription to Adobe, the creative cloud because adobe does not work on my computer. In addition, it is not possible for me to stop my subscription on the site, because it does not show I have this subscription. That's why I need to helo, please, thanks :-)

  Hi Stephanie,

  Please let us know the problem you are having with your Adobe Creative cloud so that we can fix it for you.

  For cancellation requests, please contact customer service.

  Reference: cancel your creative cloud membership

  Kind regards

  Sheena

• I tried to install Itunes on my new computer and it says that Itunes can not be installed because it does not work on this computer help!

  I just bought a gaming pc and tried to install Itunes... He said that he could not install because this software will not work on this computer... Contact software publisher for a compatible version or something like that...

  Operating system: Windows 10

  Manufacturer: Cyberpowerpc

  : Processor AMD FX (tm) - 4300 image 3.8 GHz

  Installed memory (RAM): 8 GB

  System type: 64-bit, x 64 processor operating system

  ROM: 1 TB

  Graphics card: Nvidia GeForce 730 GT 2 GB RAM

  Can someone tell me please how to get ITunes to my new computer?

  Thank you very much

  Shiz13

  Visit the section more information for troubleshooting problems with iTunes for Windows updates and make sure you download the correct version. Look at the rest of the tip of the user if needed.

  TT2

• iTunes does not work, error "Microsoft.VC80.CRT, version ="8.0.50727.4053", type ="win32 ".

  my computer I cannot install itunes. I have a windows vista 32... I have installed and uninstalled itunes and it still does not work...  It gives me this error code "Microsoft.VC80.CRT, version ="8.0.50727.4053", type ="win32", publickey Token ="1fc8b3b9a1e18e3b", process or architecture ="x 86"Please refer to the help and support for more information. HRESULT: 0X800736FD... Can someone tell me what I can do to fix this? : ()

  Hello

  It comes to the installation of vista operating system instance

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• ITunes does not work when my ipod is plugged...? turns off.

  ITunes does not, as soon as I plug my ipod touch, works for a few seconds then POPs a box and stops...

  Hello
   
  1. what pop up message do you get when iTunes shutdown?
  2. have you made changes on the computer recently?
   
  The solution to this problem is to uninstall the current version of iTunes installed on your computer and reinstall the latest version of iTunes for better functionality.
  To do this, follow the steps mentioned in this article: http://support.apple.com/kb/TS1363
   
  For further assistance on this, please visit the following link: http://www.apple.com/support/
   
  Hope this information is useful.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why Windows Search does not work on my computer

  I asked to fix the problem with search, but it's still doesn't work do not

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what exactly happens when you try to search for any file or folder? You receive an error message?

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  See also the following article that may help you.

  Windows feature search does not work properly, you receive script errors in Internet Explorer, or some information are missing after you upgrade to Windows XP or after you have uninstalled Norton SystemWorks 2003 from a Windows XP computer