iTunes gel

With the help of iTunes 12.3.2.35. OS X El Capitan 10.11.2

This unfortunately persistent problem was in the Bay for several months, but has recently picked up.

If iTunes is nothing other than the display of "songs", the program will freeze with the rotation range ball very quickly after opening. In particular this happens when you try to add titles to the library. The program always opens in the 'artists' mode, which is the worst in this regard. A gel is inevitable.

Opening with a wi - fi "off" keep the problem at Bay. This seems to be a bad solution, however.

I have no "smart" playlists Podcasts, webradios, Apple music Connect and Shared Libraries are all disabled. library music iCloud is enabled. I have a lot of music not purchased from iTunes, which I listen via an iPhone.

Thanks for your help.

It seems to me like a problem of network speed, but that's a guess.  Apple assumes that everyone has connections bandwidth without fault and if you use iCloud you pretty well.  I cannot give details, but if you can do something like electrician your computer to the Internet, you may be able to see if it is in neutral it's a network problem.

Tags: iTunes

Similar Questions

  • Problem with iTunes gel preferences and other issues.

    I don't know why, but the week last iTunes randomly decided to not work: whenever I try to open the preferences panel it hangs and release only randomly after a few minutes only to freeze again when I change the tabs. Also, all devices that I connect so that open freezes iTunes, yet once it thaws in itself rarely after waiting an hour or more but crashes again soon after.

    I tried everything short of wiping the disk and start from scratch (not an option to be honest): followed every single link help I found on Apple's site, used several malware scanner, defragmented, made several clean install iTunes and its components.

    I'm on an ASUS N53SV win 10, latest version, all the updated drivers. I don't really know what else remains.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • need stop synchronization before finishing to avoid ipod classic remove

    I've updated to itunes version 12.5.1, as well as Windows 10.  If I let my ipod classic finish syncing, everything on the ipod is removed.  So I have to restore the ipod in disk mode so that itunes recognizes the ipod and avoid itunes gel settings.  I found the only way to keep my music is to stop synchronization before it ends or the entire contents of the ipod is removed, and I'll have to go through the process of restoring ipod to factory settings again.  During synchronization, I disable the Windows 10 firewall and anti virus as Apple support told me that it could interfere with itunes.  What is - this with the finishing of sync that removes my ipod?

    It's weird...  Hard drive it is possible to the iPod becomes unreliable and is damaged during the synchronization process.  What happens if you set it up to only synchronize a small number of songs, instead of "all"?  For example, on the settings screen of music from iPod in iTunes, rather than choose to synchronize the entire musical library, choose the option to synchronize playlists, artists, albums, and genres, and select only a SINGLE album.  These songs always get deleted at the end of synchronization?

  • gel syncing to iTunes (iPod Classic 160 GB stops synchronization)

    I have about 19000 mp3 files in my iTunes I try to sync my iPod 160GB Classic (2009). I've updated to the latest version of iTunes and my iPod is updated to 2.0.4.

    The iPod is recognized and synchronization starts as usual and files begin to transfer... BUT iTunes crashes at some random file and stops the synchronization. ITunes basically says it's still sync (but stuck on a single file) and the iPod shows the screen 'do not disconnect - please eject before disconnecting '. It seems to me that the iPod think it's done, but iTunes is still trying to synchronize.

    I have to close iTunes and restart the computer to get iTunes working normally again manually. I can close iTunes, but cannot get it to open again before restarting the computer unless I go into the Task Manager and terminate all the processes iTunes manually. If I have this and go back to iTunes and then start resynchronization, synchronization is completely blocked on the first song, while the iPod does not sync at all.

    If I restart my computer then start again so I can start the synchronization, but the same thing happens again.

    Moreover, I had an iPod touch 3G on this same computer with iTunes and have never had a problem syncing like that ever.

    Here are some of the things that I've figured out and to try to solve this problem:

    • I deleted all the songs (files) in iTunes which can not find the program on my hard drive more.

    • If it freezes, the songs he says were be synced with the iPod are not actually on the iPod. Only 2-3 of the first songs sent when syncing remained on the iPod. Well most of the time. In manual mode, they seem to "stick."

    • I have restored my iPod back to factory settings. Who has not solved the problem.

    • I understand that this has NOTHING to do with corrupted files. The file it freezes on seems completely random (I did about 10 to 15 times) sometimes it freezes as soon as possible and sometimes it freezes later. I also checked to make sure that the files are not corrupt. which is not. I even deleted them from the list at the beginning when I first had the problem.

    • I put it to sync only checked songs and then set only 30 to 50 songs at the time of transfer. In addition to taking FOREVER to sync my iPod (don't be easier?), it can still freeze at random to where iTunes synchronization, but the iPod is not. Basically, it can happen on the song #451 or song #3. The odds of a gel are far less it seems with very few songs at the same time, but it can always happen, no matter how little I do.

    • I tried the manual synchronization... same problem. It will freeze during the update.

    • I have tried different USB cables without effect.

    • I tried different machines slot USB.

    • Reinstall windows... that he has not solved.

    Looks like you did a lot of troubleshooting already.  As the hard drives used with computers, the hard drive of your iPod mini becomes unreliable over time.  So the cause can be the disc is hard not to write data at random times.  Maybe it's not the cause in your case, but it is possible.

    As a test, if you have other USB devices connected at the same time, you can try to shut down the PC and unplug it all the USB devices.  You can leave standard keyboard/mouse USB connected, if used.  In order to put the iPod in Disk Mode

    Put the iPod in disk - Apple Support Mode

    Computer, run iTunes and connect the iPod to a direct USB port by itself.  iTunes may ask you to do a restore with a message on the "recovery."  Tell iTunes to proceed.  Once the restoration is complete, try to do a full synchronization.  If this does not help, please report back.

  • iPad gel due to the constant popups iTunes

    Since the recent update on my iPad, not stop the iTunes login popup. I don't use iTunes. But it is freezing everything I do until I hit "Cancel".  How can I disable this?

    Just re-read, you post. You must enter your password here. Boring, but you do. Try going into the settings, iTunes and App store. Click on your Apple ID. Disconnect and then reconnect.

  • Gel iPhone... !

    I am facing problem with my iPhone on gel, it stops abruptly by acting and just gel util I block and unblock again

    I tried hard reset and restore all but the problem remains the same

    Please gave me some tips how can I solve this problem, because it becomes a headache for me now. Thank you!

    IPhone-6

    software update 10.0.2

    Hello Has1710,

    Welcome to the communities of Apple Support!

    I see that your iPhone is icy and stops working unexpectedly. You lock and unlock the iPhone, and then he answers. Also, you did a restart of the force and restored, and remains the same question. We appreciate certainly take you time out of your day to contact us about this, and I am sure that you are ready to get this resolved.

    You mentioned that you have restored. You have restored to factory settings? If this isn't the case, let's go and save the data to your iPhone (if you haven't already done so) and restore settings to see if you get the same problem after that. Restore factory settings removes all added applications and software on the iPhone which could be causing a conflict.

    The following articles will help with this:
    The backup of your iPhone, iPad and iPod touch
    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

    Please let us know if that helps.

    Best regards.

  • IOS 10 gel

    IPhone 6 Plus after updating IOS 10 his continue gel sometimes almost impossible to work seeking a quick fix.

    Try to keep these keys at the same time for at least ten seconds, until the Apple logo appears: a) the sleep/wake button and the low Volume button (7 iPhone iPhone 7 and more) or b) the sleep/wake button and the Home button (all other models)

    If that doesn't help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

    https://support.Apple.com/en-us/HT201252

    If the steps above do not help, you may need to test in an Apple store.

  • iTunes account does not work on Mac after Mac OS upgraded Sierra

    When I connect to iTunes and try to open music Apple it asks me to register for an account. When I try to access my account or sign in to my account, it freezes just.

    Hello SindyBiz,

    After reviewing your post, it looks like the iTunes app freezes when you try to sign in with your Apple ID. There are a few things we can do to see if we can get you connected and stop iTunes from the gel.
    I recommend you read these articles, which may be able to help solve the problem.

    OS X Yosemite: If an application crashes or closes unexpectedly

    We can try to create a new test user and try to connect with iTunes in the new profile to see if it's a software iTunes delivers.

    OS X Yosemite: set up users on your Mac.

    Thank you for using communities of Apple Support. Good day.

  • problem updating itunes

    I update itunes to 14.2.2 and after downloading the file, I get a message that says "the installer has insufficient privileges to edit this file C:\program\files\itunes\itunes.resources\ca.lproj\DevicePrefsGeneralAppleTVStre aming.itxib.

    I tried to change the access privileges for this file, gel itunes and reinstall, etc., but it does not work.

    any help would be appreciated. I am running windows 10

    General advice for troubleshooting when iTunes is unable to properly install (and reinstall or repair it does not) are to remove not only iTunes, but ALL the components, restart, remove the target installation files and reinstall.  See the excellent iTunes to turingtest2 Windows Troubleshooting Guide at:

    Troubleshooting problems with iTunes for Windows updates

    especially the section:

    Remove and then reinstall iTunes and other software components

  • Error with iTunes in Windows 10

    So I have a strange problem.

    What is happening is iTunes opens (perhaps more slowly than normal? Unconfirmed), but will enter a strange state. This will be repeated at random, sometimes when the program starts immediately, other times, a few minutes after. It also leaves this State at random, often after a few minutes, but only for a millisecond. Rarely, it will leave for a few minutes. The only way that seems reliable to enter this State is to plug in my iPhone. The only way to leave he must have the Task Manager kill the program, and then reopen it.

    In this State, it will not meet order entries and seems to freeze, but Windows does not recognize it as an error of gel. It will also continue to play any song that was playing before its entry into the State, but not go to the next song, when it ends (it will be however if she leaves the State). If I am interested in another application, although in that State, I can hover over the iTunes toolbar icon and see the screen, but I can't go to iTunes.

    I'm sure it's a question of iTunes, as all my other applications work fine. Reinstalling does not solve the problem but (restart the computer between uninstall and reinstall). I'm kind of at a loss because I have no idea how to solve this problem.

    Details:

    iTunes Version: 12.4.1.6

    OS: Windows 10

    Hardware: ASUS GL551

    See excellent iTunes from turingtest2 for Windows troubleshooting guide at:

    Troubleshooting problems with iTunes for Windows updates

    General advice for troubleshooting when iTunes is unable to properly install (and reinstall or repair it does not) are to remove not only iTunes, but ALL the components, restart, remove the target installation files and reinstall.

  • Can't rent the movie in iTunes Store of Apple TV

    Feature:

    Apple TV last 4th generation (latest version)

    Question:

    I want to rent a movie through iTunes Store of Apple TV, when I choose the 'rent', appears the loading mark and right and nothing more happens.

    Simply it goes no further than brand load after pressing "Rent."

    Support information:

    I've checked so far things are below;

    -Internet connection without problem (I can watch movie trailers)

    -If I press the "Menu" button, I can go back to the previous = screen then, this means, do not gel application

    -Restart the device

    -Open a session and in iTunes account

    -Rent the movie in iPad and read via AirPlay = so my Apple ID works fine

    Help, please!

    Welcome to the Apple community.

    You could try restarting your network router and try again.

  • iMAC, slow, gel Applications, beachball

    iMAC just 3 years (decent specifications)

    Applications of gel even with just the browser in use.  8 GB of RAM seem to be enough...  Even CleanMyMac3 does not solve the problem...

    Thank you in advance for your help, I don't know what causes this.

    EtreCheck release: 2.9.4 (254)

    Report generated 2016-02-20 01:04:48

    Download http://etrecheck.com EtreCheck

    Time 02:29

    Performance: Excellent

    Click the [Support] links to help with non-Apple products.

    Click the [details] links for more information on this line.

    Click [delete] to remove the adware.

    Problem: Beachballing

    Description:

    very slow iMAC

    Applications of freeze, beachball

    Hardware information: ⓘ

    iMac (21.5 inch, at the end of 2012)

    [Technical details] - [User Guide] - [warranty & Service]

    iMac - model: iMac13, 1

    1 2.7 GHz Intel Core i5 CPU: 4 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 4 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Video information: ⓘ

    NVIDIA GeForce GT 640M - VRAM: 512 MB

    iMac, 1920 x 1080

    System software: ⓘ

    OS X El Capitan 10.11.3 (15 d 21) - since the start-up time: 14 hours

    Disk information: ⓘ

    ST1000LM024 disk HARD APPLE disk0: (1 TB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Macintosh HD (disk0s2) /: 999,35 go-go (775,69 free) - 111 errors

    Drive failure!

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    USB information: ⓘ

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    EPSON EPSON XP - 202 203 206 series

    Reader SuperDrive for MacBook Air Apple Inc..

    Information crush: ⓘ

    Apple Inc. Thunderbolt_bus.

    Goalkeeper: ⓘ

    Mac App Store and identified developers

    Adware: ⓘ

    ~/Library/Application Support/com.genieoinnovation.Installer

    An adware file found. [Remove]

    Launch system officers: ⓘ

    com.apple.CallHistoryPluginHelper.plist [killed]

    com.apple.CallHistorySyncHelper.plist [killed]

    com.Apple.cmfsyncagent.plist [killed]

    com.Apple.scopedbookmarkagent.XPC.plist [killed]

    com.Apple.Security.cloudkeychainproxy.plist [killed]

    [loading] 160 tasks Apple

    [operation] 71 tasks Apple

    5 killed process lack of RAM

    Demons of launch system: ⓘ

    com.Apple.tccd.System.plist [killed]

    com.Apple.wdhelper.plist [killed]

    [loading] 200 tasks Apple

    [operation] 85 tasks Apple

    2 killed process lack of RAM

    Launch officers: ⓘ

    [operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2012-05-13) [Support]

    [operation] com.epson.ecrp.launcher.plist (2015-06-28) [Support]

    [operation] com.epson.eventmanager.agent.plist (2012-05-08) [Support]

    [loading] com.epson.ews.launcher.plist (2012-04-19) [Support]

    [operation] com.trusteer.rapport.rapportd.plist (2016-01-18) [Support]

    Launch of the demons: ⓘ

    [loading] com.adobe.fpsaud.plist (2016-01-29) [Support]

    [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-02-15) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2012-04-02) [Support]

    [loading] com.skype.skypeinstaller.plist (2013-08-14) [Support]

    [operation] com.trusteer.rooks.rooksd.plist (2016-01-18) [Support]

    Launch User Agents: ⓘ

    [loading] com.adobe.ARM. [...]. plist (2014-04-25) [Support]

    [loading] com.google.keystone.agent.plist (2016-02-19) [Support]

    [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-02-19) [Support]

    User login items: ⓘ

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app) (2016-02-15)

    Dropbox application (/ Applications/Dropbox.app) (2016-02-19)

    Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app) (2015-11-01)

    Skype application (/ Applications/Skype.app) (2016-02-15)

    CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app) (2016-01-29)

    Other applications: ⓘ

    [ongoing] com.Apple.XPC.launchd.oneshot.0x10000001.Google Chrome (2016-02-09)

    [operation] com.apple.xpc.launchd.oneshot.0x10000002.firefox (2016-02-19)

    [operation] com.apple.xpc.launchd.oneshot.0x10000008.EtreCheck (2016-02-15)

    [operation] com.epson.scanner.ica.80992.C922A536-E576-44B3-83A7-611610E7E182 (2016-02-19)

    [operation] com.getdropbox.dropbox.16352 (2016-02-19)

    [operation] com.macpaw.CleanMyMac3.Menu.72352 (2016-01-29)

    [operation] com.skype.skype.61472 (2016-02-15)

    Internet Plug-ins: ⓘ

    Flip4Mac WMV Plugin: 3.2.0.16 - SDK 10.8 (2013-07-04) [Support]

    FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-15) [Support]

    QuickTime Plugin: 7.7.3 (2016-01-14)

    AdobePDFViewerNPAPI: 11.0.13 - SDK 10.6 (2016-02-15) [Support]

    AdobePDFViewer: 11.0.13 - SDK 10.6 (2016-02-15) [Support]

    Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-15) [Support]

    Default browser: 601 - SDK 10.11 (2016-02-15)

    SharePointBrowserPlugin: 14.2.0 - 10.6 SDK (07 / 07/2013) [Support]

    Silverlight: 5.1.30514.0 - SDK 10.6 (2016-02-15) [Support]

    The internet user Plug-ins: ⓘ

    Web of Google Earth plugin: 7.1 (2016-02-15) [Support]

    3rd party preference panes: ⓘ

    Flash Player (2016-01-29) [Support]

    Flip4Mac WMV (2013-03-30) [Support]

    Trusteer Endpoint Protection (2016-02-15) [Support]

    Time Machine: ⓘ

    Time Machine not configured!

    Top of page process CPU: ⓘ

    8% Google Chrome Helper (5)

    4% WindowServer

    Firefox 2%

    2% fontd

    1% kernel_task

    Top of the process of memory: ⓘ

    1.33 GB firefox

    893 MB Google Chrome Helper (5)

    796 MB kernel_task

    Softwareupdated 475 MB

    Mdworker (7) 139 MB

    Information about virtual memory: ⓘ

    838 MB of free RAM

    7.18 GB used RAM (1.56 GB being cached)

    39 MB used Swap

    Diagnostic information: ⓘ

    19 February 2016, 10:51:09 self-test - spent

    The report states:

    Macintosh HD (disk0s2) /: 999,35 go-go (775,69 free) - 111 errors

    Drive failure!

    This means that your HD needs to be replaced. Your report also indicates that you do not have a Time Machine backup, before you do ANYTHING backup computer while you can still use an external HD. You can use Time Machine ( use Time Machine to back up or restore your Mac - Apple Support ) or you can use an application such as Carbon Copy Cloner or SuperDuper to create a bootable clone.

    You have installed CleanMyMac3 which is considered to be Malware! After backing up your computer, contact the developers of CMM and ask for instructions on how to uninstall the App. Follow the instructions to the letter and uninstall applications. Then run an another report EtreCheck and carefully read any supporting the MWC.

    Your report indicates you have installed adware. After you've had the HD replaced (no you should not do it yourself), restore your backup and then follow the instructions to stop advertising windows pop-up and adware in Safari - Apple Support to remove the adware you have installed.

    In short, your computer is a mess.

    Go forward, NEVER install antivirus or cleaning apps or utilities maintenance party. At are not necessarily the best, and at worst can create a mess of your system. If you follow these simple rules, your system must be running reliable for years:

  • Gel and horizontal line

    Hello guys, but first forgive my English language.

    Before that I don't have enough time (busy with the campsite) and strong wifi to update my ios for my iphone 5s. I use ios 8.4.1 then I've updated directly to 9.2.1 ios using itunes as I supposedly updated ios 9 first. Then, every 3 minutes scrolling my phone, he become the gel and the horizontal lines appear on my screen. Also, I restarted my phone for my time. But it remains the same. Whats happening? Help me

    Hi noshsyahirah,

    I don't know if the horizontal lines that you see on your iPhone are the result of the iOS 9.2.1 update but I will propose a number of things to try.  The first is to update your iPhone in order to ensure that the software is installed correctly.  If the problem persists, you will need to backup your iPhone and then restore it as a new device.  If after trying these software troubleshooting steps you still see horizontal lines, then your device will need to be inspected for a hardware problem.

    How do I Save your devices using iCloud or iTunes

    If you are unable to update or restore your iPhone, iPad or iPod touch

    IPhone repair options

    Take care

  • 12.1.3 iTunes freezes with iPad

    I'm looking for suggestions for the community to solve a problem of gel I use iTunes with my iPad 12.1.3.6 2 (IOS 9.2).

    Note that iTunes works the way you want with my iPhone 4S (IOS 9.2).  I managed to all systematic synchronization operations when connecting my iPhone 4S via the USB port of my computer Windows Vista SP2 (x 64).  In other words, I can select the device icon in iTunes and this with the Panel Summary of the settings for this device.  I can select other panels from there, as well as perform back ups and synchronize.  If everything is good, when using my iPhone.

    But when I connect my iPad 2 via USB and select the device icon in iTunes, the application crashes.  In other words, I can't settings panels.  In the Windows Task Manager, I see that iTunes continues to use CPU cycles - quite a bit actually, but it no longer meets its user interface. I have run it for hours to see if it takes just time - but without success. My only recourse is to stop it via the Task Manager.

    Additional details:

    1. I have reviewed "Troubleshoot problems with iTunes for Windows updates" (https://discussions.apple.com/docs/DOC-6562) and used his suggestions to reinstall iTunes - several times.  Currently, I installed iTunes64setup.exe, but have also tried iTunes6464Setup.exe.

    2. per another suggestion, that I saw in the forum, I also tried to run iTunes from an account on my computer.  ITunes hung the same way when I chose the icon of the device while my iPad is connected.  In other words, create a new account on my computer made no difference.

    3. I can launch a default backup and syncing with my iPad by invoking the File\Devices option in the menu bar.  But there are some operations that I want to run it via settings regarding photo synchronization and other signs.  As noted above, once I select the device icon, iTunes freezes and prevents me to navigate on these panels.

    4. I've been using iTunes for several years - various releases of IOS on devices - without meeting and this problem on my computer.  The problem appeared after I've upgraded iTunes to a Version compatible with IOS 9.

    5. one of the differences between my iPhone and my iPad is that I sync my computer only to the old photo library.  The iPad has so quite a few gigabytes absorbed by these photos.  The iPad has 32 GB of memory and my iPhone has 16 GB.  The latter has enough storage to accommodate my library.

    Hello Felix1058, your problem sounds familiar. You've probably found AppHangB1 problems reported as the user running Vista iPad iTunes Version 12.1.3.6 works with iOS9.1?. You can find many tales of woe by clicking on the links at the bottom of this thread. In my opinion, it's a software problem without any difficulty at the user level. There are now six versions of iTunes which can not be installed under Vista, so I doubt that any fix will come from Apple.

  • Why iTunes Windows 8 is no longer play HD movies

    After the most recent update of iTunes at 12.3.1.23, iTunes on my desktop Windows 8, it will play no longer HD movies. All I get is a black screen. He n [' t gel - I can easily go out and play the Extras for a film, but not the film itself.] I have close to 30 movies HD in my collection, all purchased on the iTunes store.  I have the latest version of the driver software and video, and all these movies have played without problem in the previous version of iTunes. I can still play SD movies. Does anyone have a solution for this problem?

    Hello BobTheBold,

    Thank you for using communities Support from Apple!

    I understand that you have a problem playing purchased HD movies from iTunes on your Windows computer. To begin the process of troubleshooting, I suggest you read the following two articles. Receive you by chance one alert or error message when you try to play HD movies?

    iTunes for Windows: can't view or read the video content of HD requires HDCP - Support Apple

    On the HD videos in iTunes - Apple Support

    See you soon!

Maybe you are looking for