Similar Questions

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

  A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• iTunes could not back up iPhone because iPhone is disconnected

  Hi Apple,

  When I tried to backup my iPhone to my iTunes, it showed this message "iTunes could not back up iPhone because iPhone is disconnected" I should how to solve this problem?

  Hello yipwh,

  Thank you for using communities Support from Apple!

  I understand that you were not able to back up your iPhone with iTunes recently. We know that situations of this kind can be frustrating, but we are here to help.

  To begin troubleshooting, I suggest to read and work through the steps to suggest described in the following article.

  If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

  See you soon!

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

  iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

  You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• I backed up my iTunes library and then wiped and restored my computer the moved my library back and reconnected to iTunes. Now iTunes does not show that the music is on my hard drive. He only sees in the clouds. How iTunes to make my paper copies

  I had to restore my computer. I backed up iTunes to an external restore then imported my library back to the original location in my home folder. Then I restarted iTunes with the option key and reopened my library. iTunes is not recognizing that the original music files are on my computer, he thinks that they are alone in the cloud. How iTunes to see the files on my computer?

  You back up and restore this way?

  Moving a library: quick response if you use preferences by default iTunes settings: copy the folder integer iTunes (and to ensure that all of its subfolders and files) intact at the other disk, hold down the option/ALT key to start iTunes and on request to select a library select iTunes Library.itl file in the copied folder.

• view iTunes Album snaps back to the top

  Hi all, I have a problem with my iTunes, which I fear may now default to iTunes.

  When I press 'play' or double-click a track for 'Album' iTunes snaps me back to the top of my list of album.

  I have the music for 88 days.

  As you can imagine, this could be rather irritating, a lot of the time.

  Is there something I can do? Or something Apple can do, such that go back to the good old days where you could actually watch what you play?

  Yours sincerely,

  Timothy Morton

  Yes, there is an annoying bug. A quick solution is to hit Cmd - L... Will take you to the currently playing song.

  I came here looking for my iTunes annoyance: when I double-click an album, all I want is so that he can play and open this album. Unfortunately, they are not properly handle double-clicks, depending on whether the album was already open, as iTunes is at the forefront and most annoyingly, according to where the album is so vertically scrolled on the screen, it may or may not play and peut or cannot open.  This bug you mentioned also another problem. (Although I only saw him intermittently).

• Error iTunes - iTunes could not connect to the store purchases - if you have any firewall software, make sure it has been set to allow communication on port 443.

  My itunes has been fine. All of a sudden today it now gives me this error: error Itunes - iTunes could not connect to the store purchases - if you have a software firewall, make sure that it has been set to allow communication on port 443.

  I do not have my firewall active. I connected to itunes, quit itunes, reconnected - still a problem.

  Was there an update and now it's a bug? Help!

  Thank you!

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I try to install MSI 4.5 with the windowsXP-KB942288-v3 - x 86 .exe file. I get a lot of messages that Setup could not back up the registry key... 5. access is denied.

  MSI 4.5 installation problems

  I try to install MSI 4.5 with the windowsXP-KB942288-v3 - x 86 .exe file. I get a lot of messages that Setup could not back up the registry key... 5. access is denied.

  I get this for about 10 different registry keys. If I hit ignore whenever Setup ends, but he told me that he have not installed properly and windows may not work.

  Any body have ideas of how to do to solve this problem?

  Thank you

  I did some further research and came across this http://support.microsoft.com/kb/949377 while it is not the same update I tried to install it, the problem seemed similar. I tried Microsoft fix it at the bottom of the page and I tried again to install MSI 4.5. This time, it worked.

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Netflix bought through iTunes does not give me the option 4K

  Netflix bought through iTunes does not give me the option 4K

  What, instead, have you done so far? Netflix Checked site help or a FAQ section? Contacted Netflix? If none of these give a solution contacted iTunes Support (http://reportaproblem.apple.com)?

• From itunes last update itunes does not start without the permission

  iTunes does not start after the upgrade. "The"itunes"folder resides on a locked disk or you do not write to this folder permissions.  I am the administrator. Windows 7 Professional.

  See the empty/corrupted after upgrade/crash iTunes library. This particular issue is addressed towards the end.

  TT2

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea?

  trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea? I got a microsoft tec tring to understand with a bit of luck again!

  Hello

  in this case, contact the HP support

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

  or HP Support forums

  http://h30434.www3.HP.com/

  or repost in the correct forum for windows 7 that I have already advised you to do