iTunes problem, some artists are sort separately

So I have been rebuilding my music library, (got a new computer and all my music is lost on the former) so I imported all my CDs. Some of the music is sorted funky. When I sort by albums, it's all good, but when I sort by artist some artists are all split!

For example, on the left side where it lists all the artists, I like 6 Micheal Jacksons! Some are same album but divided into two or three artists!

Now, I checked and double-checked and rechecked than all the info from the album is the same thing... that's a promise. The thing that continues to be I click on 'get info' then click on the "Sort" tab and I see that is where are some differences, but in space ' sort as "letters are gray and when I try to enter something different it activates automatically the return!

I don't know what I'm doing wrong here.

It should also note that I have tuneup and I don't know if it's the cause of all my problems.

Help, please

If iTunes displays multiple instances of an artist or an album then generally what works is to select all the associated tracks and use read the information to add say an end X for each of the areas of the slopes have in common:

  • For an album. Album, Album artist, and artist (if the artist is the same for all tracks) *
  • For an artist; Album artist (and the artist unless there are comments/featured artists listed which should not be changed)

Apply the change which merges things together, then remove the excess characters. Occasionally, it can help to close and reopen iTunes between two renaming operations.

* If the titles must be synchronized to a non - iOS device, there should be a common artist or the album must be defined as a Compilation.

Use the view of songs and display fields, Album, genre, Album, Album artist, genre artist Album, artist and genre artist side by side to see you whether or not it is necessary to change the artist and if sorting values could be the cause of additional problems. See grouping in albums, titles for help if necessary.

TT2

Tags: iTunes

Similar Questions

  • Problem: Some devices are detected, some are NOT detected.

    Dear Sirs,

    We are NEITHER-FBUS Configurator Ver 3.2.1 with PCMCIA-FBUS.

    There are three field devices on the segment, i.e. Rosemount 644, Rosemount 3051 and Fisher DVC6200f.

    Power goes to the segment of services through the hub and power conditioner.

    The LCD screens for issuers of Rosemount show information correctly as below.

        

    However, NEITHER-FBUS Configurator show only Fisher DVC6200f and their blocks.

    These two transmitters of rosemount are missing!

    I appreciated if someone is able to advise the solutions!

    Hi aarontseng,

    Please refer to the Manual of Configurator - Appendix B Troubleshooting and frequently asked Questions.

    Page 109 has lots of suggestions on issues as "a device does not appear in the tree of configuration.", "the device does not appear in the NOR-FBUS Configurator", etc.

    Please first see if those who might work for you.

    FYI, the latest version of NOR-FBUS is 14.0. You can switch to it free if you have a valid license for the older versions.

    http://www.NI.com/download/NI-FBUS-Configurator-14.0/4943/en/

  • Print problems, some parts are not printed or overdrawed white

    Hi @ all

    I try to print a canvas in Flex. First it worked fine, but suddenly, some parts were white overdrawed.

    var fpj:FlexPrintJob = new FlexPrintJob();
    If (fpj.start ())
    {

    If (someint! = 0)
    {

    fpj.addObject (this, FlexPrintJobScaleType.MATCH_WIDTH);
    }
    on the other
    {

    fpj.addObject (Chart, FlexPrintJobScaleType.MATCH_WIDTH);
    }
    FPJ. Send();
    }

    If only the table is printed, it works fine. But if everything is printed is the white parts. Any suggestions?

    GRZ

    http://forums.Adobe.com/thread/794688?decorator=print&displayFullThread=true

    And this bug:

    https://bugs.Adobe.com/jira/browse/FP-6087

  • Problems with Windows Update! ("some settings are managed by your system administrator"?)

    I seem to have problems with my windows update. Last week when I checked to see if updates were needed that I was unable to view them because he said that "some settings are managed by your system administrator" who won't let me change the settings and the display of updates. It's my own personal computer so I am the administrator. However, this week update windows begins to function normally because there was an update available and I managed to download it, but a few days later, the windows on the screen update returned to say that "some settings are managed by your system administrator. I did a scan for spyware/adware/virus recently and I had only a low risk of adware that was detected and deleted without modification with windows update. This problem started right after that I got a warranty of software installed by Dell, I don't know if what they did could cause the problem. The system I use is Windows Vista Home Premium Service Pack 2. Any help would be greatly appreciated!

    You can see the effects of a hijackware infection. That being said...

    McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

    1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

    2. After completing step 3 of triple correction, manually & repeatedly update your McAfee application until you get a prompt 'no more updates'.

    3. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

    4. restart & test by...

    How will I know if my computer is up to date? :
    http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Trying to access the files on an external drive. It is denied. Some files are accessable. / problem solved. But please help me learn.

    Hello.

    I use XP Home 32-bit Edition. My a-external hard drive is a Western Digital My Book Essential 1.5 Tb USB2 HARD drive: model number: WDBAAF0015HBK-00.

    I can't access all files on the external hard drive. Currently, I mounted it on a folder. I have some files tif on the external hard drive and wanted to access my photos.

    The message that I had to right click and select open with was "access to C:\(Folder tree) denied." I tried my programs and the Windows Picture and Fax Viewer of image editing. Nothing works.

    When I right click on the images of problem the only options I have are: open, print, edit, Preview, open with, send to. None of these work.

    Some files are not accessible, and others. Unaccessable files do not have a preview image in the window pane (on the lower left side when I'm in the folder).

    This can happen if I didn't 'delete safetly' external hard drive or there was a Brown out? Some of the tif are too long file extensions? Shouldn't windows warn me too long file extensions?

    I consulted the havn't the reader for a while.

    I can not drag and drop the files to my desktop. I can't copy, cut, delete or move the files. When I click on a file, and then click file - properties: nothing shows up and he says: size: 0 bytes, size on disk: 0 bytes. But when I click on the file in the folder, it says that it is 23.3 MB. I can move the folder on my desktop.

    When I select all the files and click on file - properties: it is said attributes: read-only and hidden. They are green in box, I have not did those and it does not work. I clicked on Advanced Options, again I had unstapled the ReadOnly and hidden, then I unchecked all 4 options because they were greenboxed too. It's green boxes, not the check marks in both situations. What are the green boxes?

    ______________________________________________________

    Fixed a problem. I dragged and deposited the files on my desktop and I can access it. At this point, I just thought, since I had problems with the music files (mp3 or wav) is too long and is not be able to access or remove them, but I can delete the folders to get rid of them.

    So my question is why am I unable to access the files? This is a limitation of my external hard drive? Can I test or repair? What is this kind of disk with this version of Windows? What is a format? It's NTFS. Computer management indicates that the external drive is healthy.

    It seems that some files are not named as long as others and I could access those. Is there a limit on character/attribution of Tif or all types of files? If so, is it the same? Pourrait - linked to the way in which the external (or internal drive?) is setup in the policies tab? Are each disk different? They seem to be a little more limited than the internal hard drives, but I'm not sure if this is a limitation of the usb2.

    Does anyone know if there is a program or a way to know how many letters or numbers have been used? Microsoft Word and Works a number of words, but Works 9 (I have that) doesn't have a number of letter.

    Contradict you yourself.  At one point, you said:

    > I can not drag and drop the files to my desktop. I can't copy, cut, delete or move the files.
    and then you say:
    > A problem fixed. I dragged and deposited the files on my desktop and I can access it.

    This side, the general approach to access in this case is "Ownership" of these files.
    "How appropriate a file or a folder in Windows XP"
      <>http://support.Microsoft.com/kb/308421 >

    This probably occurred because the files were created on different computers by users with different Secure ID (SID) or you have reinstalled Windows and files were protected to some extent.  Since you are using XP Home Edition, the only way to see the security settings is to start your computer using safe mode and log in as an administrator.  This will give you access to the 'Security' tab when you right-click on a file and select 'Properties' (as described in the article above).  Apart from connecting with Safe Mode, you can use 'Cacls' command from a command prompt window (start-> Run-> "cmd") to view or change permissions on files

    "Cacls": <> http://technet.microsoft.com/en-us/library/bb490872.aspx >

    HTH,
    JW

  • Try to activate Vista's problem reports, but get the message "Windows incident reports are disabled." and some settings are managed by your system administrator

    Original title: trying to activate the Vist problem reports, but get message "Windows problem reports are disabled."

    "Windows problem report is disabled." I can't activate the problem reports and Solutions on my Windows Vista computer.  When I click on "Change settings", I would be prompted with the following message if poster "some settings are managed by your system administrator."  It's personal PC at home.  I don't know how to activate it.  I already went to political group & register to adjust some settings.  But still unable to activate this.

    All settings are disabled as this.

    This problem only recently.

    Method 1

    System Restore does not work.

    Method 2

    Disable the antivirus software does not work.

    But after some research, I realized that the problem could be due to a recent installation of a PC anti-frustration software called Soluto (the star was "Activate Crash Handler Soluto").  It worked after that.  After uninstalling, I rebooted the PC system.  After the reboot, I checked the reports on the problems and Solutions and found I could now adjust advanced settings.  I have also reinstalled the software, Soluto and ensured that this time, "activate Crash Handler Soluto" not was not checked (i.e. enabled).

  • Some servers are build via VCenter and these servers do they appear in the VRA. How can we solve this problem?

    Some servers are build via VCenter and these servers do they appear in the VRA. How can we solve this problem?

    Please perform data collection and create a fake blue print.

    Go to infrastructure Organizer select the cluster and in the next tab filling details such as blue print and other information, click Finish.

    You can manage these servers through vRA.

  • Slideshow - iTunes problem

    I use Photo Version1.5 (370.42.0) and iTunes12.4.1.6 on OS X El Captain 10.11.5. Trying to add music to a slide show of pictures of my iTunes library. I can't access most of the songs in my library. Even within an artist folder, some songs are available while others are not. I paid for the air and should be able to use all of them just for this purpose - very frustrated

    Have you tried to access the files directly from the iTunes Media folder? The problem is perhaps that your music is always protected DRM, which means you will have to redownload iTunes songs to use freely.

  • artists are to display the window more than once in sync

    iTunes version 12.2.4.   In the timing window on the right side under "Artists" of some artists appear more than once.

    For General and advice on the Organization of the iTunes, see grouping of tracks in albums . In particular, any given artist name should be spelt constantly everywhere where it appears in the two fields artist album and artist, and still have the same sort value.

    TT2

  • Problem some CD rippping

    I have a few that ripping CD to my PC have problems.  RIP a CD, then another by the same artist.  The other torn replace the torn premiera and also uses the titles of the songs on the first CD but has the music from the second. Music from the first CD has disappeared.  Cannot retrieve the two CD it will replace this one.

    Hello
    You say you have a 'little' CD that do this. This means that it works very well with other CDs of the same artist?

    Is there something special or different about the Conference on disarmament, have this problem? They are actual records purchased at a store, or are these serious discs?

    When you put the CD in the drive, an option that the disk should pop up on the desktop or in my computer. It should open and display the different song files. What happens if you save them to a folder on your computer, say a folder on the desktop. Then import them into iTunes or Windows Media Audio

  • Get error message iTunes had some missing files and must be reinstalled after Windows updates

    Original title: Windows Update 10/02/11; iPhone 4; iTunes no longer works

    I have connected my iPhone 4 on the USB port, it synced and then left the phone connected and current run iTunes when I went to bed.  When I woke up, the Welcome screen was carried out and, after login, I got the message that Windows updater had made some updates.  When I clicked on iTunes, I got an error message that iTunes had some missing files and must be reinstalled.  I tried to do a system restore to recover my iTunes library before the update.  System restore would not have worked either.

    Hi SethAaaron,

    It seems that the reboot might have corrupted the itunes.

    You can try to uninstall itunes completely and reinstall and check:

    Check out the link:

    You can view the following link to uninstall a program:

    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

    Also check out the link:

    No content appears in iTunes after to

    http://support.Apple.com/kb/TS1967

    "Some required files are missing" error when opening iTunes 7.5 or error-2093 when you open QuickTime Player 7.3

    http://support.Apple.com/kb/TA25074?viewlocale=en_US

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think, if this post can help solve your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Try to count the number of records where some columns are met

    Using SQL in Toad against an Oracle table, I'm trying to count the number of records in a table where some columns are filled. For
    example, I need to know the total number of records from a table where

    ln_stop_cd is not null - 65000 records
    ln_process_cd is <>- 25000 0 records
    ln_opt_cd is not null - 7500 records

    and the record_type = "A".

    I know that the total individual records as described above. However, I do not know how
    the SQL to show for record_type = 'A' the total count is 97500 records. Any help would be
    appreciated.

    Hello

    It seems that the problem is that the indictment may overlap; You can count the same rank 0, 1, 2 or 3 times, depending on whether 0, 1, 2 or 3 of these 3 independent conditions are met.

    Try something like this:

    SELECT     COUNT (in_stop_cd)
          + COUNT (CASE WHEN in_process_cd  != 0        THEN 1 END)     -- this site doesn't like the other inequality operator
          + COUNT (in_opt_cd)        AS grand_total
    FROM    table1
    WHERE     dt          >= TO_DATE ('01-JUN-2011', 'DD-MON-YYYY')
    AND     dt          <  TO_DATE ('02-JUN-2011', 'DD-MON-YYYY')
    AND     record_type       = 'A'
    ;
    

    You want to make charges without making 3 assists separated through the table. The problem is the 3 original requests had slightly different WHERE clauses.
    Put these conditions in the WHERE clause and make other conditions apply only to the individual counties, either with a column instead of *, or using a CASE statement that contains the condition that applies only to the column.

    Also, the date is not a column name good. Do not compare the DATEs to strings. If your column is really a DATE and you want to ignore the hours, the minutes and seconds, then the best way is to compare the column with 2 other DATES, as shown above. It's more coding, but it is more efficient and more reliable.

    I hope that answers your question.
    If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.
    You don't have to display a large amount of data. You can probably give an excellent example of this problem with only 5 or 10 rows of sample data.
    Explain, using specific examples, how you get these results from these data.
    Always tell what version of Oracle you are using.

    Published by: Frank Kulash, August 4, 2011 11:27

  • Restart fails. Error message: The Finder cannot quit because some operations are still ongoing.

    Unable to shut down or restart. Dialog box shows "The Finder cannot quit because some operations are still ongoing." I'm unable to find it than those who are. Ran disk utility and tried again with the same result. Sure would appreciate your help!

    My MacBook is a 13-inch aluminum, late 2008, Running OS X 10.11.3

    System report:

    Presentation of the material:

    Model name: MacBook

    Model ID: MacBook5, 1

    Processor name: Intel Core 2 Duo

    Processor speed: 2.4 GHz

    Number of processors: 1

    Total number of cores: 2

    L2 Cache: 3 MB

    Memory: 4 GB

    Bus speed: 1.07 GHz

    Boot ROM version: MB51.007D.B03

    Version of the SCM (System): 1.40f2

    Serial number (System): W8919BPH8QT

    Material UUID: 64CA23AE-66AA-510A-9A68-95E35F1AC9F5

    Motion sensor sudden:

    Status: enabled

    Sudden

    At ran Etrecheck, with the report as follows:

    EtreCheck version: 2.9.3 (253)

    Report generated 2016-02-11 14:08:26

    Download EtreCheck from http://etrecheck.com

    Duration 09:27

    Performance: Below average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Click on the link [check files] help with unknown files.

    Could not complete the following internal tasks:

    / usr/sbin/system_profiler - xml SPUSBDataType

    Problem: Another problem

    Description:

    Unable to restart or shut down. Error message indicates the operation is running, but I don't know what it is.

    Hardware Information:

    MacBook (13-inch, aluminum, late 2008)

    [Data sheet] - [User Guide] - [Warranty & Service]

    MacBook - model: MacBook5, 1

    1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1067 MHz

    0/DIMM1 BANK

    OK 2 GB DDR3 1067 MHz

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 161 - SN = W024902CY6GOA

    Video information:

    NVIDIA GeForce 9400M - VRAM: 256 MB

    Color LCD 1280 x 800

    Software:

    OS X El Capitan 10.11.3 (15 d 21) - time since started: about 7 days

    Disc information:

    TOSHIBA MK2553GSX disk0: (250,06 GB) (rotation)

    EFI (disk0s1) : 210 MB

    Macintosh HD (disk0s2) /: 249,20 go-go (174,22 free)

    HD (disk0s3) [recovery] recovery: 650 MB

    MATSHITADVD-R UJ-868)

    Configuration files:

    / etc/hosts - Count: 1

    Guardian:

    Mac App Store and identified developers

    Unknown files:

    / Library/LaunchDaemons/com. Starfield.backupservice.plist

    ~/Library/LaunchAgents/com. LogMeIn.Cubby.Updater.plist

    ~/Library/LaunchAgents/com. MLBAM.nexdef.plist

    ~/Library/LaunchAgents/join.me.Launcher.update.PerUser.plist

    4 unknown files found. [Check files]

    Kernel extensions:

    /Applications/transmit.app

    com.panic.TransmitDisk.transmitdiskfs [no charge] (4.0.0 - 10.5 SDK) [Support]

    / Library/Extensions

    com.seagate.driver.PowSecDriverCore [no charge] (5.2.7 - 10.4 SDK) [Support]

    [loading] com.squirrels.airparrot.framebuffer (5 - 10.10 SDK) [Support]

    [loading] com.squirrels.driver.AirParrotSpeakers (1.8-10.8 SDK) [Support]

    / Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

    com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.7 - 10.4 SDK) [Support]

    com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.7 - 10.5 SDK) [Support]

    com.seagate.driver.SeagateDriveIcons [no charge] (5.2.7 - 10.4 SDK) [Support]

    / System/Library/Extensions

    [no charge] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Support]

    Launch system officers:

    com.apple.AssetCacheLocatorService.plist [killed]

    com.apple.CallHistoryPluginHelper.plist [killed]

    com.apple.CallHistorySyncHelper.plist [killed]

    com.apple.FolderActionsDispatcher.plist [killed]

    com.Apple.CDPD.plist [killed]

    com.Apple.cloudphotosd.plist [killed]

    com.Apple.followupd.plist [killed]

    com.Apple.gamed.plist [killed]

    com.Apple.icloud.fmfd.plist [killed]

    com.Apple.printtool.agent.plist [killed]

    com.Apple.RCD.plist [killed]

    com.Apple.rtcreportingd.plist [killed]

    com.Apple.scopedbookmarkagent.XPC.plist [killed]

    com.Apple.telephonyutilities.callservicesd.plist [killed]

    [loading] 151 tasks Apple

    [operation] 71 tasks Apple

    14 killed process lack of RAM

    Launch system demons:

    com.apple.AssetCacheLocatorService.plist [killed]

    com.apple.GSSCred.plist [killed]

    com.Apple.awdd.plist [killed]

    com.Apple.Emond.aslmanager.plist [killed]

    com.Apple.ifdreader.plist [killed]

    [killed] com.apple.periodic - weekly.plist

    com.Apple.softwareupdate_download_service.plist [killed]

    com.Apple.system_installd.plist [killed]

    com.Apple.wdhelper.plist [killed]

    com.Apple.XPC.SMD.plist [killed]

    [loading] 191 tasks Apple

    [operation] 86 tasks Apple

    10 killed process lack of RAM

    Launch officers:

    [failure]... com.adobe.ARMDCHelper.cc24aef4a1b90ed56a [Support] plist

    [loading] com.google.keystone.agent.plist [Support]

    [loading] com.oracle.java.Java - Updater.plist [Support]

    com.TeamViewer.TeamViewer.plist [failure] [support] [details]

    [failure] com.teamviewer.teamviewer_desktop.plist [Support]

    [loading] org.macosforge.xquartz.startx.plist [Support]

    Launch demons:

    [loading] com.adobe.ARMDC.Communicator.plist [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [Support]

    [failure] com.adobe.fpsaud.plist [Support]

    [operation] com.backblaze.bzserv.plist [Support]

    [loading] com.barebones.authd.plist [Support]

    [loading] com.ciscosystems.ciscoconnect.daemon.plist [Support]

    [loading] com.google.keystone.daemon.plist [Support]

    [loading] com.logmein.join.me.update - helper.plist [Support]

    [loading] com.microsoft.office.licensing.helper.plist [Support]

    [loading] com.oracle.java.Helper - Tool.plist [Support]

    [operation] com.seagate.TBDecorator.plist [Support]

    [operation] com.starfield.backupservice.plist [Support]

    [loading] com.teamviewer.Helper.plist [Support]

    [failure] com.teamviewer.teamviewer_service.plist [Support]

    [failure] com.vmware.launchd.vmware.plist [Support]

    [loading] org.macosforge.xquartz.privileged_startx.plist [Support]

    User launch officers:

    [failure] com.adobe.ARM. [...]. plist [Support]

    [operation] com.amazon.music.plist [Support]

    [operation] com.backblaze.bzbmenu.plist [Support]

    [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]

    [loading] com.logmein.cubby.updater.plist [Support]

    [operation] com.mlbam.nexdef.plist [Support]

    [operation] com.seagate.dashboard.plist [Support]

    [loading] join.me.launcher.update.peruser.plist [Support]

    Items in user login:

    Dashlane Application (/ Applications/Dashlane.app)

    Agent application RealPlayer Downloader (~/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)

    Degree application (/ Applications/Degrees.app)

    Sophos Anti-virus UNKNOWN (missing value)

    MacUpdate desktop hidden UNKNOWN (missing value)

    Dropbox application (/ Applications/Dropbox.app)

    Join.me Application Launcher (~/Library/Application Support/join.me/join.me Launcher.app)

    HP Scheduler application (/ Library/Application Support/Hewlett Packard/Software Update/HP Scheduler.app)

    HP product search request (/ Library/Application Support/Hewlett-Packard/Customer Participation/HP product Research.app)

    HPEventHandler UNKNOWN (missing value)

    Other applications:

    [ongoing] at.appscape.degrees.24352

    [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000a.EvernoteHelper

    [ongoing] com.Apple.XPC.launchd.oneshot.0x1000001f.EtreCheck

    [ongoing] com.dashlane.DashlaneAgent

    com.evernote.Evernote.25952 [loading]

    com.evernote.EvernoteHelper [loading]

    [ongoing] com.getdropbox.dropbox.25312

    [ongoing] com.LogMeIn.join.me.Launcher.167712

    [ongoing] com.RealNetworks.realplayerdownloaderagent.95072

    [ongoing] JP.co.Canon.cijscannerregister.2272

    Plug-ins Internet:

    o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

    Web of Google Earth plugin: Version: 6.0 [Support]

    Default browser: Version: 601 - SDK 10.11

    Flip4Mac WMV Plugin: Version: 2.4.0.11 [Support]

    AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Support]

    RealPlayer Plugin: Version: unknown [Support]

    AdobePDFViewerNPAPI: Version: 15.010.20056 - SDK 10.8 [Support]

    FlashPlayer - 10.6: Version: 20.0.0.267 - SDK 10.6 [Support]

    Silverlight: Version: 5.1.41212.0 - SDK 10.6 [Support]

    QuickTime Plugin: Version: 7.7.3

    Flash Player: Version: 20.0.0.267 - SDK 10.6 obsolete! Update

    googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

    iPhotoPhotocast: Version: 7.0

    AdobePDFViewer: Version: 15.010.20056 - SDK 10.8 [Support]

    SharePointBrowserPlugin: Version: 14.6.0 - SDK 10.6 [Support]

    JavaAppletPlugin: Version: 8 73 02 check the version build update Java

    User Plug-ins internet:

    WbeTools64_14: Version: 1.0.22.49 © 2012 - SDK 10.6 [Support]

    WebEx64: Version: 1.0 - SDK 10.6 [Support]

    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]

    fileEditTool64_15: Version: 1.0.35.65 © 2013 - 10.6 SDK [Support]

    FreeScreenSharingPlugin: Version: Unknown - SDK 10.9 [Support]

    Safari extensions:

    AdBlock

    Add to the list of Amazon gift

    Awesome screenshot

    Dashlane

    CLEA. Video Nr

    EverNote Web Clipper

    3rd party preference panes:

    Backblaze backup [Support]

    Flash Player [Support]

    Flip4Mac WMV [Support]

    Growl [Support]

    Java [Support]

    MacFUSE [Support]

    For Mac OSX [Support] Seagate dashboard

    Time Machine:

    Skip system files: No.

    Mobile backups: WE

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 249,20 GB disc used: 74,98 GB

    Destinations:

    Backup drive Seagate Plus [Local]

    Total size: 999,86 GB

    Total number of backups: 6

    An older backup: 10/22/15, 12:25

    Last backup: 19/01/16, 21:00

    Size of backup drive: Excellent

    Backup size GB 999,86 > (disk size 249,20 GB X 3)

    Top of page process CPU:

    3% WindowServer

    1% kernel_task

    1% com.apple.WebKit.WebContent (7)

    Download RealPlayer 1% agent

    1% com.dashlane.DashlaneAgent

    Top of page process of memory:

    647 MB com.apple.WebKit.WebContent (7)

    572 MB kernel_task

    233 MB mdworker (17)

    Safari of 201 MB

    DashlanePluginService 139 MB

    Virtual memory information:

    75 MB of free RAM

    4.18 GB used RAM (903 MB cache)

    192 MB of Swap used

    Diagnostic information:

    February 9, 2016, 15:36:32 ~/Library/Logs/DiagnosticReports/findNames_2016-02-09-153632_[redacted].crash

    com.apple.AppleSpell - /System/Library/Services/AppleSpell.service/Contents/MacOS/findNames

    Can you press and hold the button of power may be up to 30 seconds to ensure the

    computer is not simply put to sleep; you want him to stop. Then the attempt to start so he could

    run in safe mode, you can troubleshoot and try to check in the system as suggested:

    • Try safe mode if your Mac does not end commissioning - Apple Support

    Additional links to other content that may be useful to solve problems are included in the above page.

    Another element is Force Quit... it can be used to quit the finder:

    • Force an app to close on your Mac - Apple Support

    You may be able to use keyboard shortcuts in start to see on other actions at startup; as

    attempts to use modes of recovery for other restorative actions, repair permissions, etc. or for

    reinstall OS X again. If you have a backup of your content and also a Time Machine backup.

    There is a good reason to suggest that you could restore the computer to a viable State in front

    These symptoms or problems became so large. The test of original material would be on

    it comes with the installation of restore Apple DVD set than computers. Maybe it's worth a go, too.

    • For Mac - Apple Support startup key combinations

    • With the help of Apple Hardware Test - Apple Support

    • Apple OS X and Time Machine tips:

    http://pondini.org/OSX/home.html

    • OS X: on OS X Recovery - Apple Support

    {Some newer models may have been updated to use the Internet recovery to restart the computer}

    online system - if the internal drive and its recovery partition missing somehow to any system start-up.

    The model seems to be too old for the Constitution or upgrade to make use of this feature, however...}

    If you have an external drive with a clone of the complete system on board, which could be used to test

    and troubleshooting of the material aspect of the computer; and a source for new offline installation clone.

    Perhaps the 'the etrecheck guy' will examine in this thread and point out some details that I'm not very familiar.

    Good luck in this case!

  • iTunes remove some applications

    I would like to delete some apps to iTunes. The applications are no longer on my devices. I saw something where you all delete and redownload them to my devices.

    However, my iPad is 32 GB (I know now I made a mistake and would have to pay $ 100 more than 64 GB) and there are a few applications that I want sometimes, like NFL apps, since the season is essentially over. I do not need/want them in the off-season. I want to install them again next season, where I will renounce some other applications. So this is the reason why I want to remove them from iTunes. But there are other applications where I no longer need them and I would remove it from iTunes. How can I go about deleting some applications from iTunes?

    Homepage: Mac Book Air (2013) OS X El Capitan, i7, 8 GB RAM and 512 GB Flash.

    Work: Windows Pro 64-bit 10. 8 GB of RAM, 250 GB Flash.

    Devices: iPad 3rd GEN iOS 9.2.1 32 GB; iPhone 5 iOS 9.2.1 64 GB.

    It comes from a recent thread of Knhaze (so I can't take credit for it).

    I struggled with this simple action for a good amount of time as well. If you are referring to the page that looks like this, you are in the wrong page to remove the apps.

    To remove apps on this page, you will need to head over to this icon

    From there, you can right-click one of the applications that you don't want in your library.

  • Satellite P300D-130 - some drivers are missing on Vista 64-bit

    Hello, I own a Toshiba Satellite P300D-130, model serial PSPDCE-000009FR, 78055027.

    I installed Windows Vista Edition (letters) Home premium 64-bit.

    Since this installation, no network adapter is detected, nothing appears in the administrator of ring road (ring road) of the NIC (map).

    In addition, there is a category in the ring road (peripheral) administrator the other roads (peripherals) of the ring "with ring 4 roads (peripherals) pilots (drivers) who are not installed (code 28):"
    -Mass storage controller, identification of hardware (equipment) N: PCI\VEN_1217 * DEV_7130 * SUBSYS_F F501179 * REV_01
    -Ethernet controller, N to identify material: PCI\VEN_11AB * DEV_4355 * SUBSYS_FF501179 * R EV_12
    -ring unknown road (peripheral), N to identify material: HDAUDIO\FUNC_02 * VEN_14F1 * DEV_5051 * SUBSY S_1179FF50 * REV_1000
    -ring unknown road (peripheral), N to identify material: USB\VID_0BDA * PID_8197 * REV_0200
    Finally, the graphics card is reported:
    -Standard VGA graphics card, identification of material PCI\VEN_1002 aboard N * DEV_9591 * SUBSYS_FF501179 * R EV_00 with a code 10 indicating that it cannot start.

    I downloaded the update to the BIOS for Vista 64 on the Toshiba site, but nothing has changed.

    Thanks for votrre help.

    Hello

    It seems that some drivers are missing on your laptop. ;)

    To solve the problems, you must download and install the drivers on the Toshiba site. You will find all the drivers for your Satellite P300D:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    If you have any other questions, please let us know!

    Welcome them

Maybe you are looking for

  • Tecra 8100 not start

    Hello correction of a problem, it seems that the second... After that I fixed my problems of inverter, the laptop worked well for more than a week. Last night I tried to turn on the machine and... nothing happened. The display is dark, the spins of H

  • Need drivers of Windows XP Home for Satellite L40 - 13G

    I need audio drivers for windows XP for satellite L40 - 13G? I try to download it from the site intel and Analog Devices Web site, but it does not work. P.S. sorry - but my English is not very well ;-)

  • Compaq presario CQ56: trying to figure out the password?

    Enter the password administrator or power on password - after than three bad tests off System [57363131] can someone tell me what is the password? or how to understand?

  • HP Pavilion 2201TX G4 isn't close to bluetooth devices

    Hello I use HP Pavilion laptop 2201TX G4, OS is windows 8.1. My laptop is not able to find all the devices (mobile phone, bluetooth speaker). and at the same time other bluetooth devices (laptops, mobile phones, etc.) can not find my cell phone no mo

  • Windows 7 takes 15 min to start after installing Labview 2012

    Hello I need help on this, is this a bug? The problem is that on my laptop after installing Labview 2012, it takes about 15 minutes to start, this happens every time a restart or start my laptop. At first I thought something with my laptop, but then