iTunes will not connect my new iPhone

Similar Questions

• iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

  A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

  iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

  You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• iTunes will not transfer music to iPhone

  I transferred a few CD on my mac in itunes. They play very well.

  I'm trying to move these songs on my iPhone, but they appear right on my phone as being in the cloud.

  iTunes will not transfer them directly from the computer to the phone.

  It is not giving me the option manually the music either, only videos and custom manager allow drag and drop on the phone.

  Can anyone help?

  Looks like you have iTunes game or iCloud music library enabled, do you think?  If so you are unable to manage the synchronization of the iPhone directly from iTunes.

• HP deskjet 2540: HP 2540 printer will not connect to new router

  Hi, we just changed internet service providers and the printer will not connect to the new router, our HP laptop computer presents the printer in the list of network devices / wireless, but will not accept the password of network to the router when I ask him to connect. Makes me crazy! I have re-installed software etc. to connect the drive and make me anywhere I hope someone can help!

  Dave.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• HP Pavilion dv6 7000: iTunes does not connect to my iPhone 5 c

  I recently updated my iTunes and now my iPhone does not connect to my iTunes. The computer asks me if I want to enable Apple Mobile Device Service to make changes to my computer. If I say 'No', iTunes responds so that this unusable iPhone because Apple's MDS is not started. If I say 'Yes', iTunes does not show that the phone is connected. Note: the phone will still charge. When I go to Services and find the MDS Apple and attempt to start it, it tells me that "the Apple Mobile Device Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »

  I went to the Apple Store and called Apple Care. The problem is with the computer definentally. My phone connects to iTunes on other fine computers and my power cord works fine as well. Apple Care think that something in my computer blocks iTunes for some reason that I can't share my screen with Apple Support and "updates of Windows cannot currently check for updates, because the service is not running." You may have to restart your computer. »

  I have rebooted both my computer and phone several times. I have uninstalled and reinstalled iTunes.

  I don't know what to do at this point. I would like to avoid having to buy a new computer...

  PeerOne
  Thank you for your comments. My roommate eventually find me a partial solution. We uninstalled iTunes and reinstalled an iTunes earlier. He thinks that my computer isn't compatible with the latest version of iTunes. So I have the version iTunes 12.1.1 for Windows (64-bit for older video cards), rather than the 12.1.2. We are still not certain why my computer did not have the latest version (it's probably just old) but I can find my iPhone on iTunes now so I'll just ti let to the old version.

• iTunes does not connect with my iphone 6

  I updated my phone and itunes for recent versions, and when I try to connect my device with itunes, it does not connect. My computer says that my phone is connected but my itunes doesn't work. When I connect my phone, a notification appears saying "allow this device to access the photos and videos? Nothing appears saying "approve this computer? I restarted my computer several times and my phone but it still does not connect. I tried the update of the driver portion, but he says it's updated, but when I go to view the file "Apple Mobile Device USB Driver" it does not appear on my computer.

  Have you tried the following steps:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  If so, you may also want to see excellent iTunes to turingtest2 for troubleshooting Windows guide to:

  Troubleshooting problems with iTunes for Windows updates

  especially the chapters containing Apple Mobile Device Support.

• 305 a HP desktop printer: J611 Wireless Desktop HP 305 a series will not connect to new router to talktalk (using Chromebook)

  A new router through Talktalk and since then my printer Wireless does not connect.  It shows on my chromebook as this has already been added as a printer of cloud, but blue light wireless flashes.  Not had any problems before this that he was that we got the new router.  Tired to connect by using the method of the button/PIN button still no joy.

  Please note using Toshiba chromebook on windows/mac.

  Please help as I am ready to scream! Laughing out loud

  Longess

  Hello @longess,

  Welcome to the HP support forums.

  I understand that you have acquired a new router and get your Deskjet 3050 has connected to your new network.

  I would like to help.

  The blue light is flashing on the printer indicates that the wireless radio is on, but the printer is not connected to a network. This is the situation. You have a new router. The printer must be on the network.

  So the next step is to get the printer on the network.

  The deskjet printers family is usually USB wireless setup.

  This causes an obstacle when you use only a Chromebook.

  Chromebook does not support the software needed to turn the printer on the network.

  If you have access to a Windows or Macbook notebook, the following link will help you place the printer on the network.

  Configure the printer to a wireless network for the HP Deskjet 3050 a and 3070 e-all-in-one printer series

  I have something you can try.

  Check out this post from Sunshyn2005.

  Re: Deskjet 3050 does not connect to my wifi network

  If this message does not help to get on the new network printer, you will need to borrow a Mac or Windows computer.

  Good luck

• WRT54G Router will not connect on my iPhone automatecally

  Router: Linksys WRT54G ver. 2

  Firmware: 4.21.1 (last)

  Security: WPA2 Personal

  iPhone: 3GS

  Can I connect my iPhone to my wireless network, if I broadcast the SSID of the router, but if I turn off the show and then the iPhone can not connect automatically. So, I get the name and the network security code whenever I turn on my iPhone? And I do not broadcast the SSID.

  In fact, Disabling SSID broadcast is a bad thing that lowers your security.  The reason of this, it is related to the problem you are having with your iPhone.  SSID was intended to be broadcast - go ahead and rebroadcast.

  When a Windows-based computer connects to a "hidden" network, should be a note that the SSID is not broadcast.  From that moment, every time that Windows computer does not have a network connection, it will constantly send the connection requests that you guessed, clearly understood the SSID.  If not, how the Windows computer would be able to connect?  He doesn't know that its in your home and close enough to your router.

  The problem is of course that the Windows computer, typically a laptop, will do it everywhere wherever you are.  These packages are easily detectable with the simpler network analysis tools - and striker will be able to detect both your SSID and your MAC without being anywhere near your network address domestic.

  Computers (and the iPhone) which are only connected to the "visible" networks don't need to do.  They used scan, looking for those broadcast of the SSID, and then are alive when they find one they know.

  The iPhone is a phone, and he needs to save on battery life, so he cannot have the luxury of these packages to search daily for each hidden network, you connect to, so the problem of broadcasting.

  Take a look at this article From Microsoft TechNet for more information.

• iTunes will not launch when my iPhone is connected to the pc

  He used to work.  When I open itunes manually iphone 6 syncs and appears in itunes.  Most of the fixes I've seen are for Mac etc..  Is this still a problem of ios on my phone?  I have the latest update to 9.2.1. He has not worked in quite awhile, do not remember what is the last update, he worked with.

  I did a lot of tests by Apple.  Everything was working and in order.  Diagnosis of NAB, which is located in the menu helps in itunes.  The only thing that seemed wrong was that I was not to run the program as an administrator, who I am.  I close itunes and right-click on the icon of itunes and click on "run as Administrator".  I unchecked the option to "automatically sync when this iphone is connected."  Then, I closed itunes.  Right clicked on itunes and "Ran as Administrator" once again I then checked "automatically sync when this iphone is connected".  Close itunes again (while I was doing all this I disconnect and reconnect the iphone).  Then, I plugged in my iphone to firewire (connected to the laptop), once again and low and here's open itunes.  Hop this help someone as well.

• iTunes will not connect to Apple TV 1st generation

  I recently tried to synchronize the new movies for Apple TV 1st generation in iTunes, but it does not appear in my list of devices in iTunes.

  He worked recently, but all of a sudden the Apple TV does not appear in my list of devices.

  When I connect my iPhone & iPod to iTunes, it works very well, but not Apple TV?

  You connect via WiFi or ethernet?

• iTunes could not connect to this iPhone because an invalid response was received from the device

  My iPhone6 works on my Mac at work, but not on my Mac at home? He was going well until the day or there are 2 - I just upgraded my phone to 10.0.2 and now can't connect to iTunes or iPhoto.

  Can anyone help?

  Thank you!

  Describe connect? It sees, but not copy, can he not see it.

  What is the operating system to work? What is the OS at home?

• Xbox live will not connect to new jersey

  When you try to connect to xbox live it says connection failed

  Hello

  1. what connection you are average (wired or wireless)?

  2. are you able to browse Internet?

  3 did you changes to the computer before the show?

  4. you use computer to connect your Xbox 360 console X box live?

  5. what operating system is installed on the computer?

  You can check the link below to solve the problem with the connection using Xbox live.

  When you try to sign up to Xbox LIVE or recover your profile, you receive the error message: 'sign Xbox LIVE is currently unavailable. Please try again later. »

  http://support.Microsoft.com/kb/912278

  See also:

  Use your computer to connect your Xbox 360 console to Xbox LIVE

  http://support.Microsoft.com/kb/978618

  How to connect to Xbox LIVE

  http://support.Xbox.com/en-us/Xbox-Live/get-started/connecting

  Alternatively, you can view the query on the link provided below for assistance.

  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx