Similar Questions

• After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

• iTunes will not recognize my password even if I reset it.

  I'm trying to set up my new Iphone6 using my latest backup of my Iphone5c.  ITunes does not recognize my password even if I just put in place a new know buddy but chose to reset.  He does not accept anything as password.

  What password are you ask, what message/prompt shows on the screen? Your backup of your 5 c is encrypted, and it is the password that you used for the encryption that you are asked for and enter?

• 12.3.3.17 ITunes will not recognize iPhone on Windows 10

  This isn't a question.  It is a statement.  The latest version of iTunes is broken for Windows 10.  He won't shoot the Apple's USB driver.  The computer will see the device on USB and you can see the photo folder, but iTunes does not recognize the phone.  I tried to remove and reinstall iTunes and it still does not work.

  Hello wgpowell3,

  Thank you for using communities of Apple Support.

  If iTunes does not recognize your iPhone while it is plugged, there are additional troubleshooting steps to travel outside reinstallation of iTunes:

  If iTunes does not recognize your iPhone, iPad, or iPod

  Take care.

• iTunes will not random on my iPhone6S after updating IOS

  My iTunes will not BE NOT random at all after I did this 10.0.2 software update!  I mean, if I hit random play on one of my playlists, does not choose a song randomly on the reading list and literally play it over and over and over again.  Basically, it does the OPPOSITE of brewing.  It is a major problem and my phone and my iTunes worked very well before this update! Suggestions?   Please?   Or, is the way to Apple, this to trick me into buying a whole new phone?

  Hello Vesper40,

  I understand that, despite trying to mix a playlist, your iPhone is just to play one song of this playlist repeatedly. In such a situation, you may need to disable the screen playing snooze in the music app.
  

  Control playback. Tap a song to play and show the MiniPlayer. Tap the MiniPlayer to display the now playing screen, where you can do the following:

  

  Repeat steps. Glisser slide upward, then press on to repeat an album or a playlist. Double click to repeat one piece.

  iPhone user Guide - play music

  See you soon!

• V12.5 iTunes does not recognize my iPhone or other Apple turning on IOS v10.0. Is there a fix FIR this?

  I recently updated my version of iTunes to 12.5 and my iPhone to 10.0.2 and now iTunes will not sync with my iPhone 6 or my iPad. I tried different cables apple I have with the same result. My PC recognizes the phone I get Allow / do not pop up, but I do not trust / are not pop trust anymore. Apple iPhone appears in my device manager and when I try to updte it says it's already up to date. Someone has any ideaas on how to solve this problem or has had the issue as well, and could you remedy this?

  Try the iOS device is not showing in iTunes for Windows. You must select a new driver, even when Windows asks the driver is up-to-date.

  TT2

• iTunes will not match a few songs

  Recently subscribed to iTunes game to improve the quality of some mp3s, I've had for 15 years and more, most of which came from CDs that are now long gone. Some of them came from other music services that popped up over the years (music, Amazon, Zune etc.). They show that the 'transferred' rather that 'matching' when I know for sure that they are available in the store. I tried to convert them to AAC, delete the original file and then adding to iCloud again, but the song will always like 'transferred '. Is there a way to change this?

  For example, 13 of the 18 tracks on The Marshall Mathers LP have been matched, but the show 5 remaining as uploaded. These titles came directly from the CD.

  I should also mention that all the songs in question are at least 128 Kbps. There are a little over 4,000 affected songs.

  Something I've noticed for some of them is that they have strange sounds shrill and spots all along the trail, some of them more than others. This tends to be a problem with some of the files that have been transferred across many different computers, external hard drives and flash drives. I guess that these slight variations cause a problem for the technique of fingerprinting to identify songs. Is it possible to fix this?

  Thanks in advance for taking the time to answer.

  Hello

  It is a common problem with the reconciliation process.

  There are several theories about this, but I believe that the most likely reason for most common CD does not control.  You've probably seen the term "remastered" a lot, but what it basically means is that the sound engineers have regained the masters original and refined the sound in some way.  Now since iTunes game mostly done analysis of waveform for correspondence, these slight variations between a master CD and some master iTunes uses could shake the matching process enough to make a download instead.

  Another important factor is that if the original tracks have faults, sound decision-making process of fingerprinting will not recognize these titles.

  Jim

• iTunes does not recognize any of my iPhones (Windows 10)

  I've recently updated iTunes 12.4 and now my iPhone 5s, and my iPhone 4 are not recognized by iTunes. They appear as 'Apple iPhone' in my file Explorer, but are not accessible via iTunes or iFunBox. I tried all the options in the management of the link here:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  I removed the lockdown folder.

  I tried several cables.

  When I go into Device Manager, there is no "Apple Mobile Device USB Driver" under "In Bus USB controllers", but there is 'Apple iPhone' under 'portable '. If you're looking for an update to this pilot says 'Windows has determined the driver software for your device is up-to-date' "MTP USB device".

  More interesting still, I went down to iTunes 12.1.3, thinking that would take me back to a working version, but in fact it STILL does not recognize my phone(s)!

  What the hell is happening?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone, which has the latest operating system running

  iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone running. I downloaded the latest OS for the phone and the latest version of iTunes on my PC and have tried all USB ports several times. I also reinstalled drivers USB to the PC.  The phone is recognized on the computer of a friend under Win 7. All shows when I plug it on mine is a page showing the 'Apple iPhone' folder display of storage internal (2.18 GB free of 14.7 GB). Troubleshooting in devices and printers, where the phone displays as "Not specified Apple iPhone" generates a message saying that "Apple iPhone is an older USB device and may not work with USB 3.0 and plug it into a USB 2.0 port." But when I use USB 2.0 (I tried several times using each of the three USB ports on my PC), troubleshooting the error message says "Apple iPhone won't work correctly with USB 3.0." This seems to be a recent problem, since in March 2016, I could spend a few songs from my PC to my phone using iTunes.

  I wish I had some ideas of people who have experienced this problem, I find to be a more frustrating one.

  Well, you aren't the only one. This just freakin happened to me. I spent the last three hours with apple and Windows supports. Now I'm reinstalling Windows 10 by last resort of Windows support councils. I got the same message USB. In iTunes, under devices something removed my 5s and the iPad. But it remains 6 s wife. I tried my computers 2-(SS) 3.0 ports and 1 port 2.0 ordinary. I tried all four thinners cables I have. I will let you know the result of the Windows reinstall.

• I have iTunes for Windows 10.  iTunes will not play the music through my internal speakers when they are defined by default.  iTunes will play through the headset.  My speakers will play with other applications.  Why is this?

  I have iTunes on Windows 10.  iTunes does not recognize my internal speakers when other applications will recognize them.  I can use the helmet without a problem.  Why is this?

  If you go to iTunes/Edit/Preferences/reading and select 'Audio Direct' for 'use of Audio play '.  Then log off iTunes and back log and you should be able to hear through your headphones.  Good luck!

• Air iPad - iTunes does not recognize the recovery mode because it detects that the device is locked with a password

  Well I'm really frustrated here. I have an iPad Air that I bought for my roommate who unfortunately passed away in October, and so his family gave me his iPad Air and all the other things I had bought for him.

  Here's the question. iTunes appears whenever I turn it on and says he can't go because its locked with a password. Good not much according to Apple's site, I reboot into recovery mode... Problem is... nor iTunes 11 or 12 will be pop - up and say its been detected in recovery mode, even if I restart the computer and then reopen iTunes.

  What I'm missing here? I am running Windows 8.1, the computer recognizes that its been plugged with two modes... It is the thing of most frustrating I've ever lived and I can't do it in recovery unless its connected to the computer. I tried pressing the home key, which starts just the iPad as usual, as soon as I fix the cord. Also, I don't know what version of the software is (I guess 7 since he never really used) - apparently different versions of the software have different recovery quirks.

  I tried the DFU instructions and powers of the iPad on the same before Apple logo the first 3 seconds that you are supposed to hold down the power button.

  I am disabled and home because of the panic and anxiety so go to the Apple store isn't something that would be easy for me so if anyone has a solution, I'm all ears.

  It was easier to make a gold card HTC that is to delete this thing and that says a lot, considering the amount of work went into those back in the day...

  One last thing. iTunes will NOT open if the iPad is already connected. I have to unplug it, forcing iTunes close then reopen.

  Post edited by: Saeren

  You should try to do a hard reboot on the air of the iPad, press and hold the power button and the home button until the apple logo appears.

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 12.5.1 iTunes does not recognize the connected device

  iTunes was working fine yesterday, the computer recognizes the device and managed to make a back-up. Put current iTunes 12.5.1 and now iTunes does not recognize that a device is connected. The computer recognizes that a device is connected, it is a device of trust but not iTunes. Even in the file menu, devices is not available. All the USB drivers are up to date and used 3 different usb cords.

  Current iphone OS 10.0.2

  Windows 10

  Hello

  Check this help page: If iTunes does not your iPad, iPhone or iPod - Apple Support

• 12.5.1 ITunes will not load on Windows 10 so I can't sync my new iPhone 7

  12.5.1 ITunes will not load on Windows 10 so I can't sync my new iphone 7

  Right click and run as administrator

  See also this document

  If you see an error message "Windows package install" when you try to uninstall iTunes from your PC - Apple Support

• My computer Windows 10 acknowledges IOS devices. ITunes will not.

  My computer Windows 10 acknowledges IOS devices. ITunes will not. I tried to start and stop the service. I uninstalled I Tunes and reinstalled. I tried different cables and USB ports. Always I Tunes none of mu IOS devices recognizing. It worked fine 2 days ago?

  Make sure you run the latest version of iTunes available at itunes.com/download

  The current version is 12.5.1