iTunes will recognize my iphone 5 but not my iphone 6 s

Similar Questions

• Download iTunes to recognize my iPhone 6 times out of 10 Windows.

  I use iExplorer to backup my iPhone 6.  When I was a little cleaning up files via Panel control WIndows 10 I deleted iTunes on my PC because I never use it. (I did not remove a file or a program that did not have a name that I recognized as an application I installed, but no longer use.  If I had doubts, I did not hit delete.)

  After I deleted iTunes iExplorer would not see my phone, I found. It turns out that iExplorer using iTunes. So I downloaded and reinstalled the 64-bit version of iTunes for Windows 10.  (iExplore said if your phone is not recognized, verify that it is recognized in iTunes first. So I've been focused on fulfilling that.)

  I'm sure that iTunes is updated.  I've updated the iOS on my iPhone 6. I made 10 Windows is updated. When I plug my iPhone on my PC using a USB cable, the computer asks me if I know the PC and let him access to my iPhone. So I know that the phone is recognized by the PC through the cable.  But when I go to iTunes and pull down the FILE menu and select DEVICES, everything is gray.  I tried the update level, reboot, reboot and connect it in different orders, using different USB cables, using different USB ports on my HP PC Envy.  iTunes will not see my iPhone as it was when I bought my Windows 10 PC.

  Today, someone suggested that I try another PC.  Then at work, I downloaded iTunes on my Windows 7 PC. Once it was installed I plugged my iPhone with a USB cable.  iTunes recognized my phone without problem.

  Then I came home and uninstalled iTune.  Then I downloaded a new copy and reinstalled.  He still does not recognize my phone.

  What Miss me?

  Did you just use Control Panel to remove iTunes? If so, you did not uninstall completely. See this support document for instructions on how to remove and reinstall iTunes properly. Remove and reinstall iTunes and the components of the software for Windows 7 and later versions - Apple Support

  If that's not enough, then see this document of support for the other steps to download iTunes recognizes your device troubleshooting. If iTunes does not your iPad, iPhone or iPod - Apple Support

• HP photosmart printer will print off browser IE, but not firefox. Is there a solution?

  Just installed new printer wireless HP photosmart C410a. Can get the impressions on the web or off e-mail program in the IE browser, but not in firefox. After clicking the print command in firefox, I get rather the page "send a Fax". Y at - it solution or other solution? Thank you.

  {Ctrl + P}, in the printer - name box near the top of this dialog box, select your HP Photosmart printer.

• My HP officejet pro 8500 has more - will print from my laptop, but not by the desk top

  It prints my laptop downstairs, but not from the Office superior or smart phone. There is a Wi - Fi connection.  I tried the diagnostic tests and does not issue?

  When was the last time the devices were power cycled?

  I recommend an oil change of the full power of the system:

  Unplug the router when turned on

  * Wait 30 seconds

  * Connect Router and wait for it to reboot completely

  * Reboot the computer after the powers of the router to the top

  Unplug the printer when turned on

  Disconnect the other end of the power cord from the wall outlet

  * Wait 30 seconds

  * Plug the printer back to

  Try to print now that everything has been updated.  If the unit still does not print, then get the IP address of the printer.  This can be achieved in the Setup Menu > wireless Menu.  Check the IP address which seeks the printing software.

  * Click Start menu on PC

  * Select all programs

  * Select the HP folder

  * Select the folder for the HP Officejet Pro 8500 a A910 series

  * Select update the IP address

  Also check the information contained in the document located here.  Let me know how it goes.

• iTunes recognizes an iOS device, but not others

  I have an Air iPad on iOS 9.2.1 & one iPhone on iOS even 5s. When I start my Mac with iTunes SL sees the iPad, the iPhone gets the message to update iTunes but this is the last version for SL.  Ideas anyone please?

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Some people who have improved a device over the air got around this requirement.  I'm guessing that you did a one-way device and the other differently. There no option but at the operating system level if you want to synchronize.  It may or may not be possible to upgrade your computer to the system requirements:

  You can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• HP ENVY dv6t-7300 CTO: my charger will charge another hp computer but not mine?

  This morning when I turned on my laptop charger says: plugged in, does not support. However if I plug another charger hp in my computer, it starts to load, same thing with my charger so I plug it into another hp computer that it will charge it but the second that I plug it into my computer it won't load. The computer and the charger came together when I bought it, the computer is no longer under warranty, but it isn't old minus 2 years.

  The header on the laptop or the connector of the battery may have had little dust or something else breaking load circuiit.

• My DVD will play on my computer but not my DVD player

  I created my first DVD using again, and it seemed to work perfectly. He would like to open and do what it was supposed to do on any computer. However, when I stick it in my DVD player for my tv, it starts the loading process and the two blue horizontal line scroll through the TV screen and then blocks my DVD player. I have to disconnect my DVD player and then plug it upward and quickly reached the eject button to release the DVD.

  These questions below may be for another product... but the kind of information that you must provide is the same for the products you use

  Need someone to help... more information please click below and provide the requested information

  -Organization of information FAQ http://forums.adobe.com/message/4200840

  Something to try (if you're Windows)

  Create an ISO of DVD output file, and then use the FREE http://www.imgburn.com/index.php?act=download to write the ISO to a DVD (send the author a PayPal donation if you like his program)

  .

  Read http://forums.adobe.com/thread/1322583 for notes on the Imgburn WITHOUT any add-ons toolbar installation

  .

  ImgBurn will read the mark of REAL from the disk drive, which isn't always the same as the label for the box (Memorex is known for 'nothing' buy and put inside a box of Memorex)

  .

  When you write to disk with Imgburn, use possible speed setting more SLOW, so your burner has the better chance of creating holes to burn laser "good, well trained"... Since no DVD player is required to play a disc burned, having a 'good' high-quality Virgin will help

  .

  Use Taiyo Yuden simple layer or layer two Verbatim or Falcon Pro for layer two printable inkjet

• Website will run on Windows Mobile, but not air iPad

  I am accessing a site of learning of the Red Cross.  When on a Windows machine, I get a page that says "content open in a new window" and a message below says "allow once" or "always allow this Web site.  I answer that question and still very good.  However, when trying to get to my class of learning within the site, when I'm on my Ipad Air, it just seems to hang up.  I see the page 'Content open in a new window' but nothing else and there is no way to continue.  Does anyone know how I can get past this please?

  Not every site is optimized for the iOS or mobile devices - if possible use "m" instead of www as m.redcross.org instead of www.redcross.org and check

  You can also try with another browser if you wish

• My computer recognizes my cRIO-9002 but not the analog input NI 9205

  Hello

  I work with a unit 9002 cRIO and a NI 9205-analog inputs. When I check if my computer recognizes cRIO in Measurement & Automation Explorer, everything is OK, I have the cRIO with all its software and ports.

  But when I am using the wizard DAQ in LabVIEW, I click on "data acquisition-> entries-> voltage->...» "and he said:"no supported device found ".

  I searched through the forum, I installed all the new versions of the software and drivers, and I tried with real-time or labView with nothing.

  Do you know where is the problem?

  Thank you!

  Hi xavgu

  You won't be able to use the DAQ Assistant to acquire the data of your cRIO. Try to do is like trying to flyfish with a bottle opener, which is totally different things.

  To get data in the cRIO you must first program the FPGA to read data in the module and then transmit data to the real time controller, which can either logg data or send it in turn via TCP/IP to you Windows host. Unfortunately the 9002 cannot manage Mode Scan, which would have made it easier for you.

  Please take a look at these links:

  Getting Started with CompactRIO and LabVIEW

  Getting Started With LabVIEW FPGA 8.x

  Best regards

  David

  NISW

• Printer connected to the network, MG5320 will print without mac fault but not with windows 7

  Canon MG5320 printer works great and I am able to print wirlessly of my mac mini which is 3 rooms away from the printer, but my windows 7 laptop is right next to the printer can print only if USB is connected and not wireless. I recently tried to separate the printer and the computer laptop windows 7, placing the printer rooms 2 far but the custom still pc wireless printing. I don't know what to do now?

  Hello smiles917.

  It may be possible that the Windows 7 computer is configured to use the USB port and not on the wireless connection.

  Uninstall and reinstall the drivers should fix this problem.  Please, perform the following steps:

  1. open the control panel from your desktop or the Start Menu.

  2. open programs and features.

  3 uninstall the drivers MG5300/MP and the Canon IJ Network Tool.

  4. close all open windows.

  Once this has been done, please visit our Web site at the following address to download and install the latest driver for MP for Windows 7.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg5320#D...

• The ATT Uverse technician had to install a new router it reconfigured my laptops and desktop, now they work. I have a wireless HP printer, it will print from the desktop, but not the laptop, the message indicates the printer offline. Help!

  I need to know how to re acrivare my prinrer wireless, itr says he is offline

  If the printer is accessible and works and that your computer can reach it via the network, then most likely the printer has been set to ' offline '.

  This can happen when you try to print to the printer when it is not reachable and it accumulates mainly of your printing until it is put online, or it can be done manually by changing the mode.

  To change the mode back to "online" you will need to open your printers folder and right click on your printer and select "use printer online".  You can also check your printer settings and make sure that the printer you want to use is the default printer (the default printer can also be defined by double-clicking the printer icon and choose "Set as default printer").

• My downloaded music blackBerry smartphones will play in media player but not as a ringtone

  I moved some MP3s to my BB and you can see them on my press card.  I can read on my phone when I go to music.  I've assigned one as a ringtone to my phone, I edited my phone settings 'normal', travelled to phone, section of the case, change option, was able to navigate my music folder on my media card, selected the file and he presents himself as the ring tone for my phone.  Made for so many 'partner' in the options of the case. But when I get calls to the standard T-Mobile jingle thing again.  I deleted the file and went through the steps twice, but still no luck.  It "seems" like it should work, but it's not fair.

  Any suggestions?

  Music MP3 needs to be cut out in 30 seconds or less and 512KB or less to the size of the file.

  If you don't have an editing application audio on your PC (such as Audacity, free), try one of the many Web sites

  for the mounting of the clip:

  http://www.makeownringtone.com/

• Printing of Emails. My printer is not printing my entire email.__It all things will print in internet explorer, but not from windows mail how can I fix the problem?

  no electronic printing full .exampe htoel reservstions confirmation

  Hi goodmema13,

  (1) did you check with other applications if printing is displayed as expected?

  (2) how exactly you want to print?

  Problem could be linked to the layout and settings; You can follow the steps mentioned below:

  (a) open your Email in a new window

  (b) if the images are cut off the coast, click on "File-> Print Preview", and in the toolbar, set "scale:" to "Shrink to fit", if a different setting is displayed.

  (c) if the part of the text is cut off, try setting "scale:" 100% in print preview mode.

  (d) in addition, make sure that it is set to the right paper size.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• iTunes does not recognize my iPhone 6

  I updated iTunes and my iPhone to the latest updates (iOS 10 and all that is the iTunes one) and iTunes does not recognize my phone, but my computer recognize (I have a HP envy with Windows 10). I tried everything that looks like finding the Universal Serial Bus thing and turn off my limitations and download and redownloading iTunes. I did the thing were I updated my driver on the computer and nothing has worked. I don't understand why it does not work. I can't even synchronize with iTunes via Wifi, it just does not appear. Someone please just help me please

  Hi BrittLeighCass,

  I understand that you are not able to get iTunes to recognize your iPhone, now that you have updated your iPhone to iOS 10. That you have described here some quite impressive troubleshooting in-depth. Fortunately, however, it may well be a few additional things to try in this situation.

  First of all, let's make sure that iTunes is completely up to date: iTunes - download iTunes

  If the update to iTunes is not your iPhone appears, see if there are all the steps described in the article below that you do not have covered still.

  If iTunes does not recognize your iPhone, iPad, or iPod
  https://support.Apple.com/en-us/HT204095

  See you soon

• iTunes 12.4 dosent recognize my iphone more than 6 s

  my itunes dosent recognize my iphone 6s more try re install the itunes on my windows pc... but the result is the same

  Here is a good starting point:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support