IVI go check if routes are connected

Trying to connect a route connected already will generate an error.

What is the best way to check if a group of route is connected before you try to establish a connection?

I m using IVI and Switch Executive to connect/disconnect the route groups.

Try to build a switch sequence something like that.

Get the name of the group as an argument road. First, check if the routing group is connected (avoiding an error). If not, connect the Group itinerary, otherwise do nothing.

Using the 'Get information' operation and entering the "route"(not groupe) in the channel 1 and channel 2 and checking the status seems to work ".

But it seems to work by using road names (not the itinerary for group names).

And I can't find how to resolve route of group names to links using IVI switch stage. (can make using Labview. but you can't combine LV IVI and IVI switch)

PER DAY

You are looking for routes multiconnect. This is a setting that you can configure in the NI Switch Executive (NISE) for routes individually.

Enabling this setting allows a road linking several times without generating the error that you have mentioned.

However, a way of opening must be as often that you closed before. It is the task of the calling application to keep track on how many times you have closed or you just repreat by opening the road until you get an error of NISE.

I think that already there is the feature request NISE stores the number of closures by route and add functions to query this information. Unfortunately, I have found it in less than a minute so maybe you want to spend more time to find. If you can't find, please do not hesitate to post (in the idea exchange forums!).

Thank you

Norbert

Tags: NI Software

Similar Questions

  • Error - Windows cannot login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly. Unable to log-in to the guest account

    Original title: problem: Guest account does not work even after activation due to profile problems.

    After you activate the guest on this system account tries to log in under this account to fail with the message "Failed to load the user profile". According to the information I found online about this error, I checked HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList to see if a key exists since comments (it isn't). I also checked the Windows application log and found the following entries:

    • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

      DETAIL - access is denied.

    • Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you close the session
    • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

      DETAIL - access is denied.

    • Windows is unable to login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly.

      RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.

    The path of the C:\Users\TEMP does not exist, and the sqm file specified does not deny entries in its ACL, just full control to the SYSTEM, LOCAL SERVICE, my admin account and the Administrators group.

    I'm running Windows 7 Ultimate x 64 edition.

    Christopher S. Charabaruk

    Well guys,.

    The simplest solution is to read what the error.

    "Cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm"

    I tried a lot of suggestion, but delete the file crazy and that's all working again.

    Beter first remove windows live as well. I only have the first and received the message that something is wong with the installation.

    Hope this has been helpful.

    Commander Paul

  • Check if host are connected to Virtual Center, not a cmdlet command, but from a file

    Sometimes, I have to work on a list of hosts that are part of Virtual Center. But are are not organized in glomeruli or records or any cmdlet that I can call.

    So sometimes I run scripts based on the list generated by the user below is an example of the code how I work against the list of hosts.

    $list = Get-Content "C:\Program Files\PowerGUI\goodhost1.txt".

    ForEach ($server in $list) {($luns = Get-ScsiLun -Server $vcs -VmHost $server)}

    Sometimes these Listehotes can come from a database. The database sometimes misspells the hostname. So before working on the host I ping them and generate a list of capable host computer ping and not able ping.  Those who were not able to ping usually strike fault in the host name, and I would easily fix those and put them in a master host list.

    So in essence, my script runs when I have a master host list. But when the host is not connected in Virtual Center my script breaks. So, I have to go change my master host list and get him out of the host that the script has run on including that which has not been connected and re-run the script. Kind of pain.

    So what I'm looking for is a code example or idea on how to check if the list of my host against virtual center to see if its already connected.

    When you work with the cmdlets I use something like this

    Get-vmhost | where {$_.} State - eq 'Connected'}

    I could do something similar? With my own list.

    Thank you

    Oh sure!

    Get-VMHost | Where {((Get-Content "D:\scripts\hostsfile.txt") -contains $_.Name) -and ($_.State -eq "Connected")}
    

    Hugo

    PeetersOnline.nl

  • The GSSAPI/Kerberos ticket is not accepted by the server POPs please check that you are connected to the domain Kerberos/GSSAPI. How can I fix it?

    I just downloaded and installed Thunderbird on a new computer Windows 8. I get the message in the title when I press the Get Mail button

    Press Alt or F10 to display the Menu bar, and then select the toolbars under view/toolbars.

    I think you should change the Normal password authentication and maintain the security of the SSL/TLS connection.

    http://help.Telecom.co.nz/app/answers/detail/A_ID/21595/~/Telecom-business-mail

  • I want to see all the devices that are connected to my router

    I have a router E1200 and it is very good, however I have noticed that there are 12 devices connected to my router so infact it should be only 4 devices. I would like to see all the devices that are connected and disconnect those who do not belong to HELP!

    You use software to see all the devices that are supposed to be connected to your router? You can reset and start over with your router.  Make sure you have security enabled on it as WPA Personal. You can try a DHCP reservation so to ensure that devices that will have access to your router are those you have included on the list.

  • Motherboard has 2 ethernet ports. both are connected to the router, only 1 is sending/receiving information.

    OK, my onderstanding I should be able to define a place for sending and one for receiving. How I do that... Both are connected to the router. If I unplug one, the other to rest and then work. But my? is how to work both for sending / and the reception. I have an ASUS Crosshair 590 MB, internet by cable that goes from router then to computer... the any 2 are connected to the router. SOMEONE HAS IT PLS! Can help to ya? THX, Nolan

    Hello

    Yes, this problem will cause a problem psychological too many users.

    Some vendors of motherboard put this second NETWORK card, because it cost them 30 cents to do this, and it seems not good for marketing.

    While users cannot let go of the poor port (30 cents) sitting there with nothing to do. (;_;)

    Jack, MVP-Networking. WWW.EZLAN.NET

  • Bulletstorm on W7 error""we must check the release date of your game, make sure that you are connected to the internet"on pressing ENTER.

    Original title: Bulletstorm on W7

    Hi, I installed Bulletstorm for my grandson on w7, on the start-up of the prog. It comes up with a "we need to check the release date of your game, make sure that you are connected to the internet" on pressing enter, he says: I am not connected to the net and unable to connect to live, even if that window is open!

    XM

    Given that Bulletstorm is not a product of MS, I suggest you cont EA (the developer) for assistance

    http://www.EA.com/Bulletstorm

  • Error: the server that you are connected using a security certificate that couldnot be checked when sending emails in Windows Live Mail.

    DEAR SIR

    IM USING WINDOWS7 HOME BASIC

    MY PRODUCT KEY IS:.

    Original title: in the face of security problem.

    * Removed *.

    WHEN IM USIND WINDOWS LIVE MAIL I'M FASING THIS TYPE OF PROBLEM WHEM IM SENDING EACH EMAIL.

    THE SERVER YOU ARE CONNECTED USING A CERTIFICATE OF SECURITY THAT COULDNOT BE VARIFIRED

    A CERTIFICATE CHAIN TO PROCEED BUT TERMINATE IN a ROOT CERTIFICATE WHICH IS NOT TRUSTERD BY the PROBIDER OF TRUST.

    DO YOU WANT TO CONTINUE.

    Y OR N

    WHEN IM CLICK YES THEIR MAIL HAS BEEN SENT.

    WAIT FOR YOUR SOLUTION

    THANX

    Hitesh salvation,

    As you mentioned, you use Windows Live Mail, you can post your question to the Windows Live Mail support for assistance.
    http://windowslivehelp.com/product.aspx?ProductID=15

    Hope the helps of information.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • With several Secure areas, how can you check that the user box is subscribed to when they are connected?

    So I guess it has to do with {module_data} and your API but I can't seem to understand this.

    I have 3 secure areas, basic, premium and pro and I want to use the liquid to display content on their page of account based on what secure area, they are advertised to. I know how to write the logic of the liquid, I feel like a dunce because I don't know which module to use to check where they are subscribers. Please when replying, don't slam me too hard upside the head because I don't know that it's right in front of me.

    I thank everyone!

    You can use module_data to get the information, but you still had the native module to do this:
    module_subscriptions | Developers of business catalyst

    You can run a collection and do what you want with the data.

  • Internet goes when you are connected to wifi

    Bought an iMac on eBay this week, works fine apart from a problem I encounter with internet stall, which really starts to get boring!

    It's an iMac, mid-2011, with OS X el Capitan 10.11.3 installed and put to update to the most recent update.

    The question...

    When you are connected to our home network (Sky Broadband) I get internet access for 5 minutes for an hour then stop him internet but the wifi is connected. At this point if I check all other computers/phones/tablets on the network that they are all still connected to the internet with absolutely no problem.

    The temporary solution...

    If I disable the wifi on my iMac and then back on again once it reconnects immediately and internet works fine still a time - until it stops!

    What I tried...

    Restart the mac repeatedly

    Restarted the router again

    In network settings, advanced on the mac, I renewed the DHCP lease (loads of times - note it always seems to come back with exactly the same ip address - I guess it's good?), updated the DNS (last post I read said to use 2.4.4.2 so am currently on that), tried to manually set the MTU to 1453, I deleted all the other networks stored outside my home network Too much.

    Does anyone have any suggestions please for all messages that have worked for them, or things that I could try?

    Thanks a lot for your help

    Joe

    Did you erase the internal drive and install OS X yourself? Did you run the hardware test? If this isn't the case, please do both.

  • How can I make my PC act as a router to connect to the Internet?

    How to make my PC act as a router

    Hey Microsoft,
    How can I make my PC act as a router to connect to the Internet?
    Could you please let me know? What should I actually configure the router?

    See you soon,.
    Charel Sisouvong

    Hello

    You need Virtual WiFi:

    You may not have that unless you try to connect to other WiFi devices via your computer and
    many WiFi devices and their drivers do not correctly support the virtual pilot.

    Check with the manufacturer of system and/or support updated real manufacturer Sites and WiFi device drivers.
    (Which is also updating the driver virtual.) If no new drivers WiFi are available then re - install the present
    one.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods
    below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
    found)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
    (Those become your fonts of rescue system manufacturer).

    Repeat for network card (NIC) and is a good time to get the other updated drivers as
    Windows 7 like the updated drivers.

    ==========================================================================

    More information on what WiFi devices a virtual: (as noted above, if the device or the driver is not
    support the virtual device or is not required then it can be disabled).

    The WiFi device and the driver is installed must support a Virtual WiFi configuration. Check with the system
    Manufacturer support, their documentation online and drivers and ask in their forums (if any) known
    questions. If the wireless device is supported for OEM sound drivers, visit their site for updated drivers and
    known issues (Intel, Realtek, LinkSys and others).

    Windows 7 adds native Virtual WiFi from Microsoft Research technology
    http://www.iStartedSomething.com/20090516/Windows-7-native-virtual-WiFi-technology-Microsoft-research/

    How to setup virtual Wifi in Windows 7 without any additional software
    http://www.Blogsdna.com/5506/how-to-setup-virtual-WiFi-in-Windows-7-without-any-extra-software.htm

    Connectify allows possibility virtual WiFi in Windows 7 machines
    http://www.geek.com/articles/news/Connectify-enables-virtual-WiFi-ability-in-Windows-7-machines-2009112/

    On the wireless network hosted
    http://msdn.Microsoft.com/en-us/library/dd815243 (vs.85) .aspx

    Build a Wireless Home network without router - see Windows 7 section
    http://www.labnol.org/software/wireless-network-without-router/11494/

    Transform Windows 7 into Wifi Hot Spot with Virtual Router free tool
    http://News.lehsys.com/2009/11/turn-Windows-7-into-WiFi-hot-spot-with-virtual-router-free-tool/

    =========================================

    3rd Party Solutions

    Connectify is a software easy to use for Windows 7 computers router.
    http://www.Connectify.me/

    Virtual Router - Wifi Hot Spot for Windows 7 / 2008 R2
    http://virtualrouter.codeplex.com/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Error Msg: Local Area Connection network cable unplugged

    I'm installing Wi - Fi at home and continue to operate in the above msg.  I have wireless but

    I can't connect to internet at the "another computer" - not the host computer.  New router and adapter, double checked connections
    and have all the lights good... can anyone help?

    Hello

    'Local Area Connection network cable Unplugged' is a message that applies only if you use an Ethernet cable to connect to the router.

    See the documentation for your wireless adapter to find out how to connect wireless. Or number of the brand and the model this adpater for additional help.

    Tricky

  • HP DeskJet 3050 a"the printer and the computer are connected to different routers"

    I am trying to configure my J611 all-in-one HP DeskJet 3050 again on my wireless network and this is the message I get "the printer and the computer are connected to different routers" but I only have one router! (Netgear WNDR3400).  My operating system is Windows 7.  What I am doing wrong?

    Yes, you have a router, but there two (technically three) networks.  I guess that is your printer or your computer is connected to the Guest network.  Check that your PC is not on the network of comments.

  • Tab shares missing Local Area Connection

    Hello friends!

    Bad, I need your help... I wanted to share my internet to my laptop for my android phone, but I can't find the tab sharing for my local area connection properties. How can I fix?

    It looks like this on my laptop (sample image ONLY not mine)

    Your help will be very appreciated! Thank you in advance! :)

    Hello

    How did the laptop connected to the internet? Is it cable or wireless internet connection?

    The sharing tab is not available if you have only a WLAN card.

    If the Android and Windows 7 have a Wi - Fi connection watch connectivity or Virtual Router to turn the Win 7 machine into a hotspot Wi - Fi.

    I suggest you to refer to the links and check if it helps:

    http://Windows.Microsoft.com/en-in/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

    http://Windows.Microsoft.com/en-in/Windows7/what-are-the-different-Internet-connection-methods

    http://Windows.Microsoft.com/en-in/Windows7/unleash-the-power-of-your-laptop

    Please post with the information needed to get help.

  • Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

    When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

    Hello

    Try to uninstall and reinstall the network adapter drivers.

    Download the latest drivers from the card manufacturer support page.

    Download the drivers and extract them to a folder of your choice.

    In Device Manager, right-click on the adapter.

    Click Update drivers and choose her browse my computer for drivers.

    Choose let me a list of choices, click on disk and point to the folder with the drivers.
    ---------------------------

    Computer network health.

    Check the Device Manager for the entry of valid card of the wire.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

    Turn off the computer and the router, reset the router and the computer.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    On the State of intellectual property.

    TCP/IP and its variables usually look like this.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    Typical TCP/IP status looks like this.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    Physical address
    is the MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1.
    IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ------------------------

    Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted

    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Jack-MVP Windows Networking. WWW.EZLAN.NET

Maybe you are looking for

  • Blu error screen! STOP 0X000000F4. Need help.

    Hello. I have this laptop with win 7 installed. It worked fine, until I did an o procceses with cleaning TuneUp2009. (I do regularly each month and it is ok) but now after tuneup2009 restarted my pc, start it shows this stop error message. STOP 0X000

  • External hard drive partitioning

    Hi all I recently bought a western digital MyBook 2 TB with the intention of partitioning the drive into partitions of 1 to 2 for the purpose of the use of backup time machine on my mbpr 15 "and my wifes 13" mbpr. Ive formatted disk in OSx extended b

  • Lower to expected output A100

    Hello. I recently bought a Satellite A100 PSAA9E and have been very disappointed with his bass with him. It is currently set to the highest volume level and is well off the level that I expect. Is this normal for this machine? All advice appreciated.

  • i290 battery life is bad, truly the worst phone EVER!

    I've had this phone for 4 days and I hate to death. It shows only the last 20 calls (I do about 50 per day) and I have to charge it every night. I've had phones for $24.99 which hold the load better than this piece of junk. in any case, can anyone re

  • Error at startup &lt; module &gt; Module is trying to access a secure API

    Hi friends, I am trying to run the application on Blackberry. But it gives following error: Error starting Module tries to access a secure API. Can you get it someone please let me know why he comes. I searched the Forum, but not able to find what ar