Iwatch Poweroff Navigation app

Similar Questions

• Navigation app will not open

  Tried to use the Navigation today, but I get an error message. Maps works very well. Anyone have any ideas?

  Mine did not work either and here what I did to fix it. Go to the market and search for Google Maps and then uninstall it. After that it is uninstalled, you will see it listed as day & it erases the last update that came out a few days ago. Remember that the automatic update is not checked, then disconnect from the market. Your Navigation app now works again. Since Navigation app comes with Google Maps the was last updated must have a problem or a bug for the enforcement of part Navigation app.

• What is the fastest way to convert navigation app 1-level 2-level once a project has already been established?

  What is the fastest way to convert navigation app 1-level 2-level once a project has already been established?

  You cannot change a project to change this setting. You will need to create a new project.

• Post navigation app gone?

  I have the mini iPad 2, just upgraded to iOS 10 yesterday. When I clicked on a specific to read e-mail, it seems that the navigation arrows at the top left of the screen that allowed you to move to the next or previous E-mail have disappeared. Is this a bug? Or a new feature? It seems that email navigation will be affected without those arrows!

  You're right, it's gone. I usually use my mini in the orientation to landscape (wider than tall) so always have a list of message on the left while I've never supported on the arrows.

  On the iPod and probably the phone there is still left and right arrows to navigate through mails.

• In navigation app does not not for members of an office

  We are laucnhing 4 new applications for January Magazine. A member of our team is having problems with a specific action. At the bottom of each folio content, we place a button that says at the top. This button connects you to the first page of the folio. We used to accomplich this using the navto: / / command in the button panel. For example, navto://articletitle_v. Then we started to use the go to the first order of the page so that anyone can reuse the same key the brands continuatlly and don't have to put in navto commands for every folio over.

  This process works for each person on the team (5), except for one. We are all using the same setup and the same version of the Toolbox. Everything else is this member of the team works well when tested, including buttons to navigate from article to article. However, we cannot simply go to high function to work. We have tried both methods, the navto: / / and go to the first method of page and won't work if we test its problems. I also did random rectangles on this person's machine and set up to take you to the top, just to see if there was something wrong with the chart. Even these new graphics will take you to the top. As a work around for someone else on the team has open files and put the thumb buttons up in and everything works fine.

  Anyone encountered this and if so how to solve? It's one of those things that will keep me awake at night, I can say.

  His works now. We have continued just try to reinstall the tools and restart indesign. The buttons started working on the 4th time. I can't explain why it finally worked, just that it's working now.

• A way to replace/disable the car dock app?

  I'm not a fan of the car dock app. I can only add an application shortcut and I can't replace those already existing. There is also a large icon back too much space in the application of the card that I can't turn off. In addition, I would rather just the default Google's Navigation app instead. It has a "follow me" function better when you browse not. Well, at least I like the first option in terms of person compared to aerial perspective.

  So, is it possible to replace the application of the car with a 3rd party application? I want to start instead of a Motorola when the phone is connected. If so, what is a good 3rd party car app?

  If this is not possible, then completely disable the application of the car to start when it is docked? I prefer to continue to use the Motorola car dock since I have active stock that turn on the GPS and Bluetooth when it is docked. I can press menu and then exit to return to the home screen, but when I press the home button, it launches the car dock app again.

  Thank you!

  If this is not possible, then I turn off completely the app from car to launch when it is docked? I prefer to continue to use the Motorola car dock since I have active stock that turn on the GPS and Bluetooth when it is docked. I can press menu and then exit to return to the home screen, but when I press the home button, it launches the car dock app again.

  
  

  In my view, that the car is triggered by the connection of the equipment to the docking station (something on the connectingpins?).

  Anyway, there are a number of car dock apps in the market (I sort of hate, calling it "Google Play")... I took a quick look and found these - you may be able to find more as well.

  • Car Dock Home v3
  
  
  
  • DockAwake!
  
  
  
  • Dock No - Op
  
  
  
  • Dock nothingness
  
  
  
  • The car Dock settings

• 2.16.211 - car dock / VZ Navigator behavior?

  Now that ICS is official on the RAZR, and I. I noticed a distrubing issue each time that the connection to my Dock car.

  The unit will try to not launch the Car Dock, but VZ Navigator app each time. I have to constantly 'Decline' terms of Service in order to access the Dock car itself, which does not yet have a VZ Navigator icon in it. (it's cool). I have of course configuring the phone to launch Google Maps as the default navigation task.

  It's annoying because I'm sure you know that VZ Navigator is only good to suck $10 on your wallet every month for no appreciable gain. And now there is like a Zombie undead, unable to be killed for good.

  Can we get a new update of officail rolling to remedy this oversight it please?

  --

  Chris K.

  
  

• No apps available for my new HP Photosmart 5515?

  Hi, I am looking to make full use of my new 5515 Photosmart all-in-one. I had all this work - printing and scanning the computer to my iPhone wireless AirPrint.

  My problem is that I don't have all the apps listed in the ePrintcenter as being available for my printer. I tried to change the country of residence to US, UK, Germany or France to see if that helps - but still nothing.

  I checked for software updates for the printer - says that everything is up to date. So basically, I ran out of options.

  Any suggestions where the issue might be?

  PS My printer is 5515 but it is listed under Windows and ePrintCenter 5510 d, I hope you're well.

  All is well now. The other day I changed ISP and the router at home and the turn is played. I set up the printer with the new modem/router and my ePrintcenter was full of apps. In the end, apparently it was some sort of a network problem. That's strange, since printing on enamel and all the other features has worked very well before.

  In any case, good navigation app.

• Problems of GPS navigation after the 23.4.A.1.200

  After updating my Z3 Compact to the 23.4.A.1.200 firmware version, when I lorsque j' utilise uses a navigation app my position (the point) is displayed correctly but my direction (arrow) appears in the opposite direction. Navigate is not convinient, because if I'm heading North my devide believes I'm soing South and, therefore, gives me the wrong orders. First it something I can do about it, or I have to wait for a new update that solves the problems caused by this one?

  I checked with Google Maps maps & HERE and that they work as expected. You could try to calibrate your compass sensor. Just search any application of Compass on Google play. There are a number of those that are free.

  Another way to do is spend in Service Mode:

  Enter * #* #7378423 #* #* in the dialler.
  Select "Service test".
  Select "compass."
  Follow the instructions on the screen to calibrate the compass.

  It will be useful.

• Classic BlackBerry is unable to get a new version of the app

  Hello!

  The current version of Navitel Navigator app (https://appworld.blackberry.com/webstore/content/33343371/?lang=en&countrycode=RU) in AppWorld is 9.6.486 and Blackberry Classic is marked as device supported. But when I'm looking for this app on my classic BlackBerry (in AppWorld application), I see that 9.2.0.4 only version is available. I send email to the developer of this application and I got the answer, that there is problem of BlackBerry App World. So... How can I get the latest version on my device?

  Hi @sneer

  I suspect that the developer has another version of the device application according to BB10 you use, for example on my jump I shows me 9.5.30.0

  That being the case, when you contact the developer I would ask them to check what version of their app, they have 'activated' for each device BB10 and mention the different versions being shown in this thread based on device type.

  My suspicion is a device with the version 9.6, but other devices were not activated with the version 9.6.

  I hope this helps

• BlackBerry App GPS app

  Y at - it an application that uses data to determine where you are and update directions?

  We have just released an offline for BB10 gps navigation app.

  There is a free trial of 7 days for those who want to take for a spin.

  I will provide more information and answer questions if anyone is interested

• Lack of shot-up music/Audible in iOS 10 controls

  As a regular sound listener, I regularly used blow-up controls music on pause or go back as you drive an audiobook to keep my GPS map display on the screen. Since the update to iOS 10, shot-up music control buttons disappeared. Unless there is a more simple solution, I spend Waze audible, which is much more distracting and may be dangerous. Has anyone here found a solution?

  Hello chemess,
  Thank you for using communities of Apple Support.

  I understand your message that you want to use the audio controls in the control panel to control your audio books using a GPS navigation app. I understand your desire to not have music controls in the Panel. Controls the music is accessible from the control panel by opening Control Panel and slide the Panel to the left.

  Control Center to use on your iPhone, iPad and iPod touch
  

  Swipe Control Center left to play quickly, pause and control the volume of your favorite song, podcast and more.

  Best regards.

• How old is my iPad?

  I have a 2012 3rd generation, wifi + cell 64GB, iPad .

  Only 12 Apps installed, only 35 GB used, more Photos.

  In the past year, the pages Web of Safari Some is slowly and I can live with that.

  Now, I downloaded a Navigation app in offline mode to test before traveling abroad.

  After installation, when you start to navigate, the app close and return to the main screen of the iPad iOS.

  Counsel the use of the application or any other idea will be appreciated.

  If possible, try to update the iOS to the possible maximum version

  It is likely that the application is optimized for 9.3.1 and your profile shows 9.1

  You have enough space – if this isn't a constraint

  With regard to the Safari - using app switcher - close Safari

  Data and settings - Safari - site clear history

  Force restart the iDevice

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  See if that makes a difference - otherwise please post back with the results and we can try and solve problems more

• Is there anything to replace the HopStop?

  I used HopStop all the time. I'm literally lost without her. Y at - it site or an app to replace? I live in New York. Thank you.

  s-you-should-try-since-HopStop-is-shutting-down https://www.dnainfo.com/New-York/20150924/New-York-City/6-transit-navigation-App

• How can I scan from a Canon MX870 in El Capitan?

  Since 'up' ranking to El Capitan, I also lost my ability to scan directly from my Canon MX870 printer/scanner. This used to be flawless in previous versions of Mac OS. Now, the menu item (import scan) Preview is either gray, or I get an error message: "cannot communicate with the scanner...". ». The same error message appears if I use the Canon MP Navigator App native. Of course, it is ridiculous, since both the scanner and the computer are on the same wireless LAN, and there is no problem with PRINTING on the same unit (so the Mac can clearly find it, but not for the purposes of analysis). Help! (I've already updated the driver...)

  1. launch the System Preferences application.

  2 click on Printers & Scanners.

  3 select your printer from the list on the left.

  4 select the analysis , located next to the print tab.

  5 click the Scanner open... .

  6 it may ask you to install the software. If so, click on the install button.

  7 allow the software to install. Once installed, use the application to scan documents.

  I hope that solves your problem.

  Best regards

  Austin