j got the ink in my printer, during the passage of the aa sheet does not print what do I do?

Similar Questions

• Size of the hard drive does not match, what to do?

  End of 2012, the MacBook Pro 13 "

  I've added everything I installed and registered on my macbook and it does not match the size of my disk info...
  I just deleted all the documents that I need to see what will happen with the size of the disk and it says: drive for 'other' size is 85GB and

  Audio = 0
  Film = 0
  Photo = 0
  Programs = 0
  Security Copies = 0
  Other = 85,17 GB

  And the strange thing is that I have 10 + adobe programs installed (that doesn't add anywhere near 85 GB!)
  But the weird thing ', it is also that it shows 0GB to programs/software that I obviously have a lot of programs/software installed. WHAAAT...

  It's really annoying

  It seems as if increases the amount of data in 'other' counts for

  Is there someone out there in the world of the internet, who knows how to fix this?

  I tried to read a previous debate about this, but to be honest, I do not understand...
  I'm not exactly a macbook-computer-expert when it comes to knowledge like that

  I would be grateful for your help!

  

  It is in Danish, but... Yes

  LYD Sound/Audio =
  Film = film
  Photo = Photo
  Progr. = Programs
  Sik.Kopier = security Copies
  Agent = other

• I can't get updates because of the validation process does not work, what can I do?

  I just formatted my hard drive and need to update my windows xp sp2. i cant get thru because of the genuine validation process that does not work. What can I do next to buy an apple product...

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  See this Microsoft KB article and check if it helps to resolve the issue.

  Windows Genuine Advantage does not validate a copy of Windows XP

  http://support.Microsoft.com/kb/916247

  See also:

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

• CPU at 100% with the Task Manager does not display what makes

  I have a new computer, less than 2 months and it came with Windows 7. Last week, my computer went from the status fast trolling, does not without apparent cause. I'm not a computer expert, but I ran that several malware and virus scan does not. The Task Manager shows my CPU usage is at 100% but it only shows nothing running top 10 to 15%.

  I have an Acer Aspire 5517

  with and Athlolan processor TF-20

  3 GB of memory system 64-bit

  There are a variety of similar positions on the Internet that refer to this type of behavior, but not one that seems to be a guaranteed solution. A few success report by disabling the Windows Media Player Network Sharing Service, while others reduce the media files in folders that are monitored by WMP, etc..  You have a lot of media files?

• After installation I got the error firefox does not start, safe mode does work

  Report ID

  BP-7e0bbdc9-3b5b-44DB-8831-d8a352130608
  BP-3447b290-e4e1-4690-BBF7-14ae72130608
  BP-2894daaf-C601-4DBD-9031-001fe2130608

  This is the error after installing firefox on the pc. Safe mode works well. I also send the accident report.

  Please give me a tutorial to solve this problem.

  Hello, please start firefox in safe mode (by pressing the shift key, while it launches) & go firefox > options > advanced > general & disable hardware acceleration.

• Connect to windows cannot mail passes amended run the ASNA stiill does not work what do I I please?

  my windows live mail 2011 has suddenly started asking me for my sign in details, and it won't let me open windows live, I ran the scan and theres no fault, but he keeps asking my ID I had windows live for a few years and you don't remember how connect you then I changed my password , or so I thought, but still I can't and I have about 7 days of emails pending. Help, please

  Please ask the experts in the Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Why the extensions Manager does not recognize what CC version I have?

  I have the latest version of all applications of CC 2015. I just tried to install an extension (Flash2SVG), and I get this error:

  This extension cannot be installed, it requires Flash version 11 or higher.

  This specific extension has been developed to work with CC, and nobody else seems to be reporting a similar issue. I use a new iMac (own) 5 k with specifications top of page.

  No idea why this is happening?

  

  Hi Mark,

  This might help: "the extension cannot be installed, it requires Flash version 9 or more '

  Kind regards

  Sheena

• touchpad does not show what keys are used on the login screen

  Have a new toughbook of Panasonic CF - H2.  Windows 7. On the login screen of the touch screen keyboard has black keys with white numbers. When you type the password it does not show what keys are be depressed. Once logged in the change of keyboard color to be more transparent and you can see the key used during typing.  Is it a setting in the keyboard that can be changed or is it a thing of security?

  Thank you

  This is for safety.  Starting with Windows 8, it became optional and you can choose if you want to see it or not.

• Reinstall photoshop element 9 but the serial No. does not work

  I'm now reinstall Photoshop Elements 9 on the same computer, in window8, but the series No. does not work, what should I do?

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

• Install the printer driver HP LaserJet 3100 for Wind.XP worms. 1.1 the installation program does not start.

  An older version of Jet Suite Pro for HP Laser Jet 3100 for Win 2000 /NT 4.0 had run under XP (with an error during systemstart).

  After an update of Windows XP or this SW Jet Suite Pro to clean record no longer works.

  A new t CD - ROM HP with HP LaserJet 3100 Printer Driver Version 1.1 for Windows XP SW starts and stops after some time.

  The installation program does not run.

  At the stop "WOW. EXE does not react "."  "Waiting times for 16-bit system subtask ends." Part.System if necessary. instability.    End with OK Win16 system.

  HP after reclamation / question without help until today.

  Dieter Jansen

  Hello

  I suggest to Uninstall all the HP Laserjet Printer drivers and then try to install.

  For the second question, you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• Re: Deskjet 3070 - replaced the cartridges but does not now print!

  I have the same problem with my printer Officejet 6700 Premium. I just replaced all the cartridges with HP new ones. The printer is now going through the motions but does not print blank pages. This happens for all what I am trying to print including Diagnostics pages. The printer is a little older a year is not under warranty. Any help would be greatly appreciated!

  Hello twoshirts,

  I saw your other threads, and I understand that you have completed all the procedures listed here troubleshooting: printer does not print black ink or color of ink or prints blank Pages without success.

  I would like you to follow the steps below:

  1. reset of the printer, please make sure that you plug the printer directly into the wall, do not use a surge protector or power bar, they can cause the printer is in an error state and lose features of base over time.

  2 a 'cartridge problem', "Ink cartridge failed" or not "compatible ink cartridges" Error Message appears on the all-in-one, I know you did the cleaning steps, but, if you please, reinstall the cartridges and perform all THE steps listed

  3. now go ahead and run HP print and Scan Doctor- it has been designed to provide users with HP and features troubleshooting fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  I understand that you are not able to print diagnostics from the menu on the front panel as well, but want to see if the PSDR detects all conflicts in the software or drivers.

  Please let me know the results.

  Thank you

• Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

  * Original title: Question of re-Installation of operating system.

  I got the message during win 7 / Win 8 installation.

  "the file is maybe damaged. the file header does not match the checksum calculated.

  My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

  I have also replace Win 7 DVD and DVD player also replaced.

  I also reinstall my single RAM chip so many times. but the problem still exists.

  During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

  Pls help me Sir, I would like to Win7 in my computer again.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

  Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

  Method 1:

  Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

  M odes 2:

  If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 3:

  In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Printer print, when I print documents to the right side of the document gets cut it does not finish what was on the screen.

  When I print documents to the right side of the document gets cut it does not finish what was on the screen.  This happens on all documents.  I don't know what to do.  I got a HP Photosmart Premium and he did it so I thought it was defective and bought a HP 7520e all in one and it does the same thing.

  Hello

  All changes made to the computer before the show?
  Method 1:
  See the link, run the Fixit and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/en-us
  Method 2:
  If the methods above do not solve the problem you can check this link and follow the steps.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Method 3:

  Try to adjust the alignment on the other side. Follow the steps.

  1. Click Start.
  2. Choose Control Panel.
  3. Choose a printer.
  4. Choose preferably to the printer.

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• the preview window does not show the document that I'm about to print in Sierra

  The preview window does not display the document that I'm about to print. This problem started as soon as I upgraded to Sierra. It occurs in many applications - including in Microsoft Excel 2011.

  

  

  Hello, David Bry1,.

  Thank you for using communities of Apple Support.

  I understand that when you try to print from a number of different applications, you do not see the preview of the document you are printing. I would like to assure you that I see the preview as well when I print. Let's see how we can get this resolved.

  I advise you to ensure that the printer software is up-to-date on your printer Brother DCP-7065DN. Please choose 'Available Software' brother printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks

  If a software update is available, please install and then test and see if you get the same result.

  Have an amazing day!