J6450 will not scan since the upgrade to snow leopard

My J6450 will not scan since the upgrade to snow leopard. I can print fine but when I try and scan is says sorry, scanner could not be initialized (Scanner not found.)

You scan the front of the unit?  The software included in Sl does not support that.  Also note the HP Scan Pro included in the 10.5 software will not work with 10.6.  The 10.5 software and delete the print queue.  Make sure your 10.6 is update 10.6.1 and go here to download and install the HP software for 10.6 and Setup for your J6540.  You should be able to scan after that.

Tags: HP Printers

Similar Questions

  • Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

    Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
    Tried running firefox.exe Pei but error message:

    XML parsing error: the undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line 18, column 1:
    "< dialog < =" "^ =" "p =" "> < / dialogue >

    Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

    Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

  • Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

    Model A3E82AV number

    I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.

    I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.

    I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

    I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.

    This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?

    Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

    FIXED!

    I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.

    The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

    For people who can run on the same topic, here's a recap of what I did to solve my problem:

    Centrino 2230 installed 15.18.0.1 driver
    Update driver Bluetooth 10.0.10586.0

    Updated the BIOS to the version of Windows 8 F.2D Rev A

    If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

  • HP Officejet Pro 8000 has stopped working on the upgrade to Snow Leopard (10.6)

    Since the upgrade, despite the HP and Apple claiming that the upgrade would take care of things like new drivers, my 8000 Officejet Pro has stopped working. Of course, this could be a coincidence and something else caused the problem.

    Quite simply, the printer button will Flash. The manuals indicate it means need new paper in the tray, or there is a jam. In addition, the print utility said 'in paper '. Of course, I have no jams, and there are 40 pages of paper in the one and only the plateau.

    I deleted the printer in "Print & Fax", turned it off, unplugged the USB and then added back, twice, everything to nothing doesn't. Nothing changes. Still unable to print.

    It doesn't seem to be anything I can try. This page, "Mac OS x: installation and use of the product in Mac OS X 10.6", simply going to say that I should remove the printer and add it, which of course I did. There are no other suggestions for what I could do.

    So either 10.6 broke my ability to print, or the printer is otherwise defective and must be returned under warranty. Any ideas?

    Thank you.

    Update...

    has gone through a series of emails with HP support, during which, with all due respect, I asked me to do what I had already tried. We got to the point where we were providing for the printer to be returned under warranty. Then yesterday morning, bam, the printer works again. No explanation and no idea.

    Best regards.

  • Since the installation of Snow Leopard 10.6.1 No. LONGER CAN CONNECT

    Apple just released, and I installed the first update to Snow Leopard... 10.6.1

    Since this facility, I can connect is the Mac drives or folders that I pointed at in the shared folders

    I am running Windows XP pro...

    The shortcut on the virtual desktop can not find its target.

    If I double click on MY COMPUTER,.

    I see shared folders on the host VMARE

    If I then double click on the folder above, the message is: ' year error occurred reconnection Z for ".
    VMare-host\Shared records

    VMare shared folders: the network name cannot be found.

    This connection has not been restored.

    I have not changed anything since the upgrade to the latest version of the Fusion

    In fact, I have this problem on a regular basis under 10.5.8.  What I end up doing goes into setting up shared folders, configurations of my shared folder delete and re-enter it. It is generally good for a week until the problem recurs.

  • Video of Smartphones blackBerry will not play since the 4.5 upgrade?

    I upgraded to 4.5 a few weeks ago (with T-Mobile 8320 curve) and all of the videos that I try to put on my phone now in WMV, AVI, format etc. will not play.  Either I get a red error box saying the file is incompatible or she acts like she is going to play, but he won't play.  I've never had to convert WMV before playing on the previous operating system for the phone (4.2.2), they always played!  So I tried converting them with the Media Manager, some won't still play, and those who have a black border around the video where almost 1/4 of the screen is blank with no video (and Yes, I have 'full screen' selected).

    What is the problem with the video and 4.5?  What file formats does work now?  I don't understand why they took the opportunity to read these formats.  Always be a problem with everything these days...

    I tried AkmeFFmpeg and it worked like a charm... full screen and everything!  Very strange... I tell you it's the OS!  I've never used this program before when I got 4.2.2 and I never had problems.  But whatever, problem solved now.

    Thank you.

  • 8600: scan Premium OfficeJet Pro 8600 does not work since the upgrade of Mac to 10.10.1 (Yosemite)

    Since the update of my MacBook Pro in Yosemite, I can't function of the computer analysis to work. I downloaded again the softwear & reinstalled; reset the printer, repaired disk permissions, etc. nothing works. I also note that the HP Utility icon no longer appears.  Print and copy work very well. Any suggestions?

    I tried everything above. When I add the printer driver printer HP (instead of AirPrint) does not show as an option (even if I can find it in my downloads folder). Option is the HP DeskJet that comes with a warning that it cannot be the right driver. Also downloaded what seems to be the right driver on the HP site. He also appeared in my downloads folder. HP utility always not available.

  • C8180 won't scan since the upgrade to 8.1 Windows

    I reinstalled the drivers (full version), run the print and Scan doctor (who says that everything is fine!), unplugged, rebooted etc etc.

    Scan photos, but the documents get stuck about 25% through and HP solutions Center will "not responding".

    Last time something like this happened, I remember having to change the registry for sorting.

    It's quite disappointing... it was working fine before "moving" to Windows 8.1 to 8.0. There is problem of Windows, or HPs... anyway I have to lose a load of time trying to get something to work that was OK before.

    Hello Colin_G,

    Welcome to the HP Forums.

    I see that you encounter some problems when you try to print since you did the upgrade of Windows 8 for the 8.1.

    I have a few steps, we can try troubleshooting.

    Stage of punch that I suggest that we take is to remove the usb from the printer and computer cable and let that it disconnected until further notice.

    The next step is to uninstall the software and drivers that were still installed when using Windows 8.  Please click on the following link for printing software uninstalled.

    Once the uninstall is complete, reboot the computer.

    When the computer is back up and running, please click on the following link for the drivers and software HP Photosmart full feature.  Please save the download to your desktop as it creates it's own icon.  It will be easy for us to find when the download is complete.

    Double-click the icon and follow the instructions for installation without forgetting to do not connect the usb cable when prompted to do so.

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

    Thanks for your time.

    See you soon,.

  • 5530 envy: Envy 5530 scan since the upgrade from Mac OS Sierra

    Since the update of my Mac to OS Sierra 10.12, I can't scan to computer or run a scan of my computer.  I get an error message "Scanner reported an error" saying that my all-in-one is not available.  I tried to reinstall the driver, which is not very recent (up to HP?) and no help. I have tried everything I can think on my end.

    Hello
    The HP scanning application is not compatible with Sierra, so you may experience problems.
    Remove the HP scanning by moving it to the trash, then empty the trash.

    Instead install HP Easy Scan below, it will be installed in the Applications folder:
    http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

    If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
    http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip

    Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
    Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

    Kind regards
    Shlomi

  • Driver for Officejet 4500 Wireless all-in-one will not install after the upgrade to Windows 8.1

    Upgrade to Windows 8.1 on Pavilion g6.  OfficeJet 4500 Wireless all-in-one still print but not scan.  Downloaded driver full features.  Installation quit giving the error message "file not found".  Tried the 'chat' with no resolution sessions

    Thanks for the reply.  HP has called since then and was finally able to install the driver.

  • HP Deskjet 3520 e-all-in-one: SCAN not SCAN SINCE the INSTALLATION of WINDOWS 10

    My printer will not scann after installing windows 10. I can print and copy. I tried print and scan the doctor. But I stop serching after a few seconds and goes no further after waiting in several ouhers.

    Afternoon @Gittelone,.

    The information I've found can help you with scanning on Windows 10.

    First, you must consider the information contained in these resources.

    If you printer software was installed before your upgrade, I try to uninstall the software completely and then reinstall it by using the most recent driver available on the HP Web site. Here's how to clean all the drivers of your computer.

    I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever; Uninstalling the printer software - use as a rough guide, but the steps for Windows 8 should be pretty close to Windows 10.

    You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available. (Once again Windows 8)

    Software drivers can hide other places would be in your device manager.

    To open Device Manager:
    1) enter the Device Manager in the search field.
    2) click on Device Manager.
    (3) you can click on View, in the upper part of the windows, click Show hidden devices.
    (4) to develop the types of devices and check for any pilot associated with your printer.
    (5) to remove a device from Device Manager, click on the name of the device in the list and then click Uninstall.

    For more information, see for Windows Device Manager information 8/10.

    Download the newest software package here; HP Deskjet full feature software and drivers

    Or download from this link.

    Then look for the updates of Windows; Drivers and software with Windows Update (Windows Update 10, 8)  

    If the problem persists, you can also try to use the HP Scan and capture App instead if necessary. 

    Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

    I look forward to hear from you!

    Thank you

  • ScanSnap s1500 will not analyze after the upgrade to exchange 2012

    ScanSnap s1500 will not e-mail scan after 1st scan to e-mail.  n ' will analyze any email on subsequent tests.  -have to restart the computer.  This began when we have upgraded to Exchange 2012 r2.  Using Outlook 2010.  -have updated to the latest firmware and software.  E-mail appears in the sent items folder.

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that you are unable to scan.

    As you mentioned that this began when you upgraded to Exchange 2012 R2, then I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and you help the better.

    Check out the link:

    https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • 3D photo restores do not properly since the upgrade

    I developed an application in labview 2012 and have recently updated until 2014.

    Since this upgrade, I have a problem with my 3d image rendered incorrectly.

    I am attaching the images as it is difficult to describe the problem. There should be 4 of robot arm placed on the corners of a gray box that is placed slightly above the ground. The image with the removed soil that shows the best, but it is obviously incorrect. Remove objects and textures can give better results in some respects, but the question is always present whenever I changed something.

    It seems that parts of models are not rendered or sections are not rendered in the correct order, but I'm not aware of all the properties change this.

    I tried to change the clip plain but documentation is very limited and I doubt that's the problem anyway as the middle of the image which is incorrect, the floor and the ends of the robots never seem to cut.

    I am running Labview Robotics 2014 and using the Robotics Toolbox to generate arms on Windows 7 64 bit with nvidea GeForce GTX 760 graphics card.

    Any help is appreciated.

    Thank you

    Nick

    I experienced similar problems with the rendering window. I feel quite informal and subjective, it is that the render window is something that NEITHER is not updated with the latest improvements in graphics cards, and having developers use real 3D image controls instead.

    I experimentally tested the 3D picture control and I can't see any advantage of the render window of performance compared to the 3D so image my, yet unofficial, impression is that image 3D controls are hardware accelerated now but it is not clearly stated in the documentation for LabVIEW.

    You can put a window on a façade of VI 3D and select in the context menu 'Fit control component' and create a window similar to the rendering window. It requires a little more programming, but you get a lot more flexibility for your application.

    If you are interested, join the Group Vision 3D!

  • HP250 G3 Notebook: network will not work after the upgrade to Windows 10

    Hello

    Someone was able to get their network works after upgrade to Windows 10 for their portable HP250 G3?

    I think I have a driver problem. The message I get is along the lines of "impossible to link to network protocols. There is also an "unknown" device in Device Manager. Comparison with Windows 7 Device Manager, I can't understand what it could be.

    Of all drivers not not to work, the network is one of the most important that you can not use the Internet to debug the problem. I have uninstall Windows 10 and Windows 7 troubleshooting. (such a pain)

    So far, I tried to download all the drivers of network you're interested in that I can find on the web, as well as the Bluetooth drivers. I reload once 10 Windows installed and hope for the best. They got the right driver for the wireless network (which works only default with Windows 10 I might add) work, but I think it might be a controller driver that is still missing.

    I found a few sites that have suggested to the registry of hacking. I tried that too, but without success.

    If someone hacked into the problem, I would be happy to help.

    Hello

    Thanks for posting your concern, and I would like to try the drivers from the following link---

    http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6732463&swLangOid=8&swEnvOid=4192

    It didn't help not then write us back with the network card, you can get to the screen of the Device Manager under network adapters, as if from here so we can try searching the drivers from the manufacturer of netwrok card.

    Although I work for HP, but I am personally.

    Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

    Concerning

    Aks3621

  • Error code: code 80072EE2, computer will not update, since the last big update.

    Original title: 80072EE2

    computer will not update. also wdi prob host service. a lot of prob since the last big update. need help

    Hi Denny,

    We may refer to the article and check if it helps to solve the problem.

    Windows Update error 80072ee2

    Otherwise, you can read the article and try the steps to solve the problem.

    Temporary connection related errors may occur when you use Windows Update or Microsoft Update

Maybe you are looking for