J6480 HP wireless printer

Similar Questions

• OfficeJet J6480: Installed drivers, printer offline

  I had this problem for ages with my OfficeJet J6480 since the last update of Solution Center 13.0, who since then has caused a lot of grief for printing and network scanning to questions about my mother Aspire 6530 which has Vista 32 bit on it. My machine which is a custom built Asus P5N - D with Windows XP 32 Bit on it works perfectly with the wireless printer and has no problem with scanning for features.

  I reinstalled and rubbed the drivers many times, more a reformat. When the installation takes place the printer works perfectly, then later the printer is unable to come online with my mother Vista machine wireless.

  The only question I can find is that, in the control panel under printers Vista is that the J6480 is considered as offline, and to get the printer online, I have to right-click on the printer and select "use printer online". This resolves the issue until the computer gets shutdown. I don't know what to do and it's really disturb my mother.

  Diagnostics of the network for computers are:

  Windows XP Asus P5N - D

  -----------------------------------------------------------
  Dumping Info Diallo started on 2010-01-02 11:14:08
  -----------------------------------------------------------

  CNDUMasterData: DumpStores() started *.

  m_pNetworkStore-> dump() started *.

  Data from the network of CNetworkStore

  HostName: kenstermain
  IP address: 192.168.0.199
  Type of connection: Wired
  Signal strength: 0
  Adapter: NVIDIA nForce Networking Controller - Packet Scheduler Miniport
  MAC computer: 00:1F:C6:EA: *: *.
  VPN connection: No.
  Subnet mask: 255.255.255.0
  Default gateway: 192.168.0.1
  MAC address of the router: 00:24:01:68: *: *.
  Is the connected network: Yes
  Is connected to the Internet: Yes

  m_pNetworkStore-> dump() finished *.

  m_wlanNetworkMap contains 0 wireless devices
  m_pWlanNetworkStore-> dump() finished *.

  Network node: #1
  MAC address: 00:00:01:68: *: *.
  HostName: [unknown]
  IP address: 192.168.0.1

  Network node: #2
  MAC address: 00:00:C6:EA: *: *.
  HostName: kenstermain.phub.net.cable.rogers.com
  IP address: 192.168.0.199

  Network node: #3
  MAC address: 00:00:4: B2: *: *.
  Hostname: MARJAKIRVES-PC
  IP address: 192.168.0.253

  Network node: #4
  MAC address: 00:00:64:40: *: *.
  HostName: HP3DCC58
  IP address: 192.168.0.254
  Friendly name of the unit: series HP Officejet J6400

  m_pNetworkNodeStore-> dump() finished *.

  CNDUMasterData: DumpStores() done *.

  ---------------------------------------------------------

  Windows Vista Aspire 6530

  -----------------------------------------------------------
  Dumping Info Diallo started at 02/01/2010 11:16:46
  -----------------------------------------------------------

  CNDUMasterData: DumpStores() started *.

  m_pNetworkStore-> dump() started *.

  Data from the network of CNetworkStore

  Hostname: MarjaKirves-PC
  IP address: 192.168.0.253
  Connection type: wireless
  Signal strength: 84
  Adapter: Atheros AR5B91 wireless network adapter
  Computer MAC: 00:23:4: B2: *: *.
  VPN connection: No.
  Subnet mask: 255.255.255.0
  Default gateway: 192.168.0.1
  MAC address of the router: 00:24:01:68: *: *.
  Is the connected network: Yes
  Is connected to the Internet: Yes

  m_pNetworkStore-> dump() finished *.

  m_wlanNetworkMap contains 3 wireless devices
  Wireless SSID device #1: Kirves

  #2 of device wireless SSID: Wireless2

  #3 Wireless SSID: clyde

  m_pWlanNetworkStore-> dump() finished *.

  Network node: #1
  MAC address: 00:00:01:68: *: *.
  HostName: [unknown]
  IP address: 192.168.0.1

  Network node: #2
  MAC address: 00:00:C6:EA: *: *.
  HostName: KENSTERMAIN
  IP address: 192.168.0.199

  Network node: #3
  MAC address: 00:00:4: B2: *: *.
  Host name: MarjaKirves - PC.phub .net .cable .rogers .com
  IP address: 192.168.0.253

  Network node: #4
  MAC address: 00:00:64:40: *: *.
  HostName: HP3DCC58
  IP address: 192.168.0.254
  Friendly name of the unit: series HP Officejet J6400

  m_pNetworkNodeStore-> dump() finished *.

  CNDUMasterData: DumpStores() done *.

  -----------------------------------------------------------
  Dumping Info Diallo started on 2009-12-16 21:39:13
  -----------------------------------------------------------

  CNDUMasterData: DumpStores() started *.

  m_pNetworkStore-> dump() started *.

  Data from the network of CNetworkStore

  Hostname: MarjaKirves-PC
  IP address: 192.168.0.253
  Connection type: wireless
  Signal strength: 94
  Adapter: Atheros AR5B91 wireless network adapter
  Computer MAC: 00:23:4: B2: *: *.
  VPN connection: No.
  Subnet mask: 255.255.255.0
  Default gateway: 192.168.0.1
  MAC address of the router: 00:24:01:68: *: *.
  Is the connected network: Yes
  Is connected to the Internet: Yes

  m_pNetworkStore-> dump() finished *.

  m_wlanNetworkMap contains 2 wireless devices
  Wireless SSID device #1: Kirves

  #2 of device wireless SSID: Wireless2

  m_pWlanNetworkStore-> dump() finished *.

  Network node: #1
  MAC address: 00:00:01:68: *: *.
  HostName: [unknown]
  IP address: 192.168.0.1

  Network node: #2
  MAC address: 00:00:C6:EA: *: *.
  HostName: KENSTERMAIN
  IP address: 192.168.0.199

  Network node: #3
  MAC address: 00:00:4: B2: *: *.
  Host name: MarjaKirves - PC.phub .net .cable .rogers .com
  IP address: 192.168.0.253

  Network node: #4
  MAC address: 00:00:64:40: *: *.
  HostName: HP3DCC58
  IP address: 192.168.0.254
  Friendly name of the unit: series HP Officejet J6400

  m_pNetworkNodeStore-> dump() finished *.

  CNDUMasterData: DumpStores() done *.
  -------------------------------------------------------------------

  So is there a way I can fix this.

  Thank you and best regards,

  Ken Sullivan

  My desktop computer
  MOBO: Asus P5N - D
  CPU: Intel Core 2 Duo E8400 3.0 GHz
  GPU: EVGA 9800 GTX + Superclocked + @ 800 MHz
  RAM: OCZ Reaper HPC DDR2 800 @ 800 MHZ 4-4-4-12
  Power supply: PC power and cooling Silencer 750w
  LCD: BenQ E2200HD

  Printer: OfficeJet 6480
  My laptop: Dell Inspiron 2200
  MOM's laptop: Acer Aspire 6530

  I have some general recommendations:

  (1) of the D - Link DIR-655 WIRELESS SETTINGS-> configuration of wireless network at hand:

  (a) set the Mode 802.11 Mixed 802.11n, 802.11 g and 802. 11B for optimum compatibility.  If you are positive that there is no 802. 11b devices in the area, you can use mixed 802.11n and 802.11 g.

  (b) disable Auto Channel Scan and select channel 1, 6 or 11.  To find the best channel, download our Network Diagnostic Utility (located here) on a laptop connected to your DIR-655 wirelessrun and select Show advanced tools, and then select Show networks wireless detected.  Try to choose a channel which is at least 5 channels away from your more powerful neighbour.

  c fix the width of the channel at 20 MHz and the visibility of Visible State.  This gives you better compatibility.  While 20 MHz setting to slow down your network a bit, unless you do not have nearby wireless networks, these networks interference prevents the use of two bonded channels (for 40 MHz) in the band of 2.4 GHz Wi - Fi.

  (2) on the computer, uninstall the HP Customer Participation Program (if it has been installed).

• Wireless printer does not

  my wireless printer has stop working with my macbook pro

  Without knowing more information try:

  Troubleshoot printer on your Mac - Apple Support

• my continuous wireless printer going offline - how can I 'stabilize' the connection '.

  my continuous wireless printer going offline - how can I 'stabilize' the connection?

  Hello gerrie,.

  What I would do is put off the printer and the router so

  -essentially them turning off for about 10-15 seconds

  -and then feed the router back on waiting for all the lights turn on completely

  - and after that is back in the market I would re - turn on the printer and re-establish the connection between the printer and wireless network

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• Firefox can't find my HP 6500 wireless printer.

  Run Firefox version 9.0.1 (all at the time of upgrade to 8.0.1) on a Windows 7 PC. Just installed a HP Officejet 6500 a wireless printer. Printer works fine in Chrome, IE, and Microsoft Word, but apparently Firefox can not find. Print command has no effect. Print Preview command generates a note indicating that a printer could not be found. I have more HP Deskjet 970Cse printer or Canon MP210 printer installed on my computer.

  Update:
  Although I don't print that much that I was upset not being able to use my third HP printer & swear will never buy another... I was determined not to go out and buy a new printer 'and yet' as this one is only 2 years... Then this morning am went searched around HP site & downloaded a HP detection program (?) whatever it is to see if I could find/fix the problem myself... Once I downloaded that I scanned files to update for the printer and ran that & YES made it & I did not have my coffee in the morning, but either... Happy OK now not need to buy a new printer 'yet '... CKD my FF plugins & there is a plugin for my printer YES... Problem solved this day until next time... TY

• What is the HP wireless printer password that he ask to me to join?

  What is the HP wireless printer password that he ask to me to join? I have no idea where to find this?

  No, what's that I know he needs my wi - fi connection but the problem has been resolved by a cat HP assistant. Apparently it is a password that is printed on the first sheet printed automatically after setting up and it is this number that I had to enter. Everything works fine now thanks!

• How to print from iPhone / iPad for Officejet 4500 Wireless printer?

  I would like to print from my iPhone / iPad on my Officejet 4500 Wireless printer.  Y at - it an iTunes app I need to download?  My printer works fine print wirelessly from my desktop, just do not know how to print from my iPhone / iPad.  From what I read, it seems that this printer is not enabled for Airprint.

  Hello

  You can print from iOS using HP ePrint home & Biz.

  You can find more details below:

  http://support.HP.com/us-en/document/c02775166

  Kind regards

  Shlomi

• I'm unable to connect a Canon wireless printer to my Time Capsule / Airport utility

  Looking for advice on how to connect to a Canon wireless printer to my wireless (Time Capsule).  Airport utility does not see an option to add a WiFi printer.

  If you are referring to the method of adding a printer WPS...

  Open AirPort Utility

  Click on the image of the time Capsule

  Click the Edit button in the window that appears

  Click on the menu of The Base Station ... up where you see the icon Apple, file, window, help and other menus at the top of the computer screen top

  Click Add a WPS printer

  

  There are two methods available... . First of all try (which is identical to a button press the Time Capsule) and PIN, using a code. Choosing the right method according to the instructions provided in the installation Guide for your printer.

• 2450deskjet wireless printer: same message each time I try to download the software for dj2540

  I tried several times to get the software downloaded to set up a wireless printer. I do not have a pc cannot use the cd delivered

  We gladly invite you.

  Wireless live for 3 seconds button, that prints a report Direct wireless, which includes live wireless password.

  Kind regards

  Shlomi

• HP5740e all-in-one: Deputy HP5740e Print will not add wireless printer

  I recently had a problem where printing of pdf documents is out as unreadable solid ink lines. I have it narrowed down to only occurs with specific policies and only a reader of pdf special and only on my hp printer. I suspect that this was due to software updates, but I don't know if it's windows 10 updates or updates of adobe or some other updates. Now I just avoid using the fonts of the problem.

  In any case, an attempt to solve this problem, I decided to uninstall my 5740e hp software and reinstall the software in the hope of resolving the problem. Unfortunately, it has not fixed the issue but left us with a problem even more serious.

  Having resinstalled the software I couldn't add my printer as a printer wirelessly from the HP Print Wizard. He added fine as a usb printer and a web printer but not wireless.

  I added the printer wireless via the windows & Panel devices configuration printer OK. It prints wirelesslessly and via printing web so physical connectivity is very good.

  I really want that he recognized by the HP Print Wizard so that I can scan from the office.

  When I go to add the printer as a wireless printer, it detects the device OK showing its ip and mac, then goes on the installation of the printer and comes back with the unsuccessful installation of the device, and shows the red x between the router and the printer.

  Any ideas? It was working fine until I reinstalled the printer software.

  Another way to scan office without using the HP print wizard?

  All assistnce solve will be appreciated.

  Hi @Phlipper

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?
  
  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
  
  Let us know if it works!

• HP OfficeJet 3830: 3830 HP wireless printer is offline in "sleep mode" and don't wake up to print

  I've just set up a HP OfficeJet 3830 as a printer connected to my network wireless domestic (Airport Extreme Base Station router 802.11ac wireless). I was able to print-out of my MacBook, but when the printer goes into sleep mode, it appears offline and unresponsive to print. I have to restart the printer for her to appear online and respond. The printer will be in the basement, so it would be very inconvenient down to reboot just to print it. Kind of defeated the purpose of a wireless printer. I tried to disable the sleep mode to see if it works, but sleep mode settings cannot be disabled in the printer preferences. I already spent 3 hours to solve this problem.

  I contacted HP technical support to solve the problem. The person told me restore default settings and then unplug the power to the printer and the router wireless for 30 seconds. After restarting the router, then the printer, we have connected the printer to the network with a static IP address. Who did the trick. Even if the printer is in "sleep" for several hours, it has not disappeared in offline mode, as it is done before. Problem solved for now. Hope this helps others.

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• HP Pavilion Notebook - 17-f237: conversion to wireless printing

  Instructions for conversion to wireless printing seem to be up to Windows XP. I need the most recent which is Windows 10. Is there a site for this?

  I found this one. My printer comes with the installer for Windows XP/8. I was able to update the system from my computer at 10 and just found the link to the latest version online. Thank you.

• Someone at - he put wireless printer in place with the iPad pro? If for information and advice would be much appreciated.

  HHave just bought an iPad pro and wonder if anyone has one that they have already set up a wireless printer? If so little support and advice would be welcome?

  The printer must be AirPrint compatible, and there is no real configuration to talk on an iPad.

  As long as the printer is AirPrint compatible, and both devices are on the same wifi network, the printer should simply appear in the printer selection screen when you attempt to print something.

  On AirPrint - Apple Support

  AirPrint allows to print from your iPhone, iPad or iPod touch - Apple Support