Jam cartridge hp officejet 6110 all in one printer

Red exclamation point will appear on the front of the printer and it says 'jam Catridge and press ENTER.

I opened the catridge section and saw the whitish stripes on the left side of the shifter, but I could not eliminate them. I pushed the cartridges several times to make sure that they are fixed.

But there is no prind.

Please help me tp free jam. Thank you

Tags: HP Desktops

Similar Questions

  • HP Officejet g55: alignment of cartridges HP Officejet g55 all-in-One printer has failed.

    Failure of the alignment of cartridges HP Officejet g55 all-in-one printer.

    Please notify. Thank you.

    If you use cartridges done the alignment fails, you must use only the HP cartridge on HP printers.

  • transport jam f on Officejet 6310xi all-in-one printer

    I use an all-in-one HP Officejet 6310xi priniter.  I send the print command and when prinited sheet is delivered first four lines or are so prinitinig that half of the line and the message thenrerst prints OK.  However, after the delivery of the printed sheet I get message, "Transport jam" I received instruction of "open the door.  Clear jam and then press 'OK '.  How can I stop this from happening?  My operating system is Windows 7.

    Have you removed all paper from the input tray and shined a flashlight upwards in the status bar to ensure there is nothing caught in the rollers?  Remove the duplexer/rear access door and make sure that there is nothing in the rollers at the back.

    I would also check the printer.  The top and look down inside the right-hand side of the printer (right side of the carriage house).  Do you not see any paper into a ball in this section?

    There is also a document with steps to help fix a carriage jam in an Officejet 6310xi.  The document can be found here.  Let me know how it goes.

  • HO Officejet 6110 all-in-one printer gives a message to check the cartridges

    The above printer has always worked well so far.  I have a message to Remove and check cartridges. I deleted them several times,

    turned the printer market and unplug the power cord, etc.  The same message keeps coming up.  I changed one of the cartridges-

    put in a new color cartridge and it is still there.

    What can I do?   Help!  !

    Hello Renee,.

    Have you contacted HP about this?

    Maybe they're the best people to answer that for you because they know the material side of the printer.

    We use HP cartridges or are they off-brand?  Sometimes, off brand cartridges do not recognize properly.

    My recommendation would be to get the entrance of HP on it.

    Best regards

    Matthew_Ha

  • HP Officejet 7310xi all in one: printer keeps repeating transport jam

    My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

    Hello

    Please visit the link below to fix the problem

    http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/

  • When I turn my on my HP Officejet 6110 all in one, it makes noises like a rattling of the belt.

    When I turn my on my HP Officejet 6110 all in one, it makes noises like a rattling of the belt.

    [Moved from comments]

    Check with HP tech support to see what your options are.  This is not a Microsoft or issue of Windows.

  • OfficeJet J6450 All in One printer cartridge wrong cartridge, but it is not

    I have an Officejet J6450 All in One Printer.  I only use the new HP cartridges (not renovated, manual not refilling).  I installed a 74XL into the printer about a month with expiration of 02/11/2014.  It is still more than 1/2 full and very well printed yesterday.  Today, without apparent reason, the printer is saying that the ink cartridge is not supported by my printer... it is evil.  I tried a reset (3 and the # and when it does not 6 and the #) unplug him and by plugging it in.  I also removed the cartridge and tried both resets and then put it back in and still got the same error message.    I cleaned the print heads with a coffee filter and distilled water and tried the reset with unplugging and plugging back.  That didn't fix it.  Also, I deleted all of the permits from the hard drive and reinstalled the drivers and all updates (which I am automatically in any case, if the printer was already updated yesterday).  That didn't fix it.  I have tried everything and can't get this stupid to work printer.  I spent hours and hours on this.  I put in a new cartridge and it seems to work now, but I don't want to lose more than 1/2 full cartridge with no recourse.  I am a mother of 6 and the ink is very, very expensive, and what happens if this happens again?  Someone at - it ideas?  Any help would be appreciated.

    Sounds like the cartridge has failed, because its guarantee until 2014 I would contact HP telephone support. Can you please let us know how you get on?
    Thank you
    Ciara

  • I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

    I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

    Well, if you haven't tried this and then create a coercive power reset:

    Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

    If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

  • HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

    After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

    Hi @DMT1,

    Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

    You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

    First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

    Some links that might consult to try to resolve the problem:

    Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

    Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

    Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

    I hope this helps. I would like to know how this happens. I hope that the problem is solved without

    disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

    Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

    Take care now and have a wonderful week ahead.

  • HP 6110 All in One printer will not scan to PC applications.

    I have an 6110 all in one printer connected to a HP Pavilion desktop computer running on Vista Home Premium with the MS Office 2007 Suite.  When I try to scan from the printer to MS Word or any other apps, the error message says: "unable to connect to the PC.  However, printing from the PC to the printer works very well and the USB cables are correctly.

    Any ideas?

    Thank you

    ... WSF

    ... WSF

    WSF,

    Can scan you from your pc to the 6110, using the hp scanning software?

  • HP Officejet 4630 all-in-one printer print cancels in the workplace

    Hello

    I recently bought a HP Officejet 4630 all-in-one printer, and it automatically cancels the work in the middle of printing. The computer I use is a dv7 HP Envy with 64-bit Windows 8, and I print on a wireless network connection. My computer receives an error that HP Officejet 4630 series could not perform printing and the printer just says Cancel. I tried all the steps in the sections troubleshooting, both printing and network connections problems. I've uninstalled and reinstalled the software several times, I created a manual IP address and everything, but nothing seems to work. It seems also that the issue when using HP ePrint. It occurs in all sorts of programs and formats such as word, pdf and html. Unfortunately, I did not receive a USB cord, I can't see if that will fix the problem at all. I hope someone can help me with this, otherwise, it is obvious that there is a problem with the actual printer, I have had and I have to return something else.

    Thank you

     

     

    This is how I fixed it:

    1. Find out what IP address, is that your printer uses.
    2. Go to control panel, then click "View devices and printers."
    3. Look for your printer right click.
    4. Click on "Printer properties" and a new screen opens.
    5. Along the top, you will see some tabs. Click on the one that says "Ports".
    6. Click on 'Add Port '.
    7. Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port".  A new screen opens.
    8. Click "next".
    9. Type the IP address of your printer, and then click "next".

    Your computer should find your printer.

    Click 'Apply' and your printer should work fine.

  • HP Officejet 5610 all-in-one printer have something that can be attacked by a virus?

    I have a "HP Officejet 5610 All in one printer" running Windows XP Home edition (32 bit).

    I tried to print a file that I had been sent and the printer began to print very slowly (one line / 5 seconds). At the end of the document, which had been printed was a load of rubbish! The next print was ok and printed at normal speed. BUT now, whenever I try to "Scan" a document using 'Microsoft Scanner and Camera Wizard', the 'Wizard' can take up to 1/2 hour to load when it is used for the scanner. If used for the camera the Assistant immediately.

    I downloaded and installed the latest HP drivers and still have the problem.

    Is there something inside the printer [ROM?] that can be attacked or is this a rare case to be an error of 'material' with a four year old unit. It is interesting to try to have it fixed or can I get a new camera? If so, which is recommended for a system of "consumption"? -Many thanks.

    Hi Semajleep,

    I would recommend printing HP and the Scan Doctor running. It is a quick and simple tool that diagnoses and solves many problems of printing, scanning and connectivity. See the link below for more information on how to download, install and run this tool:

    http://goo.GL/MzwLH

    I would like to know if this helps or not.

  • HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

    HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

    Hello

    Thank you for using the HP Forums.

    You can try this alternative solution to Scan:

    HP extended Scan

    FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

    Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

    Let us know if it works.

  • HP Officejet 6210xi all-in-one: a HP Officejet 6210xi all-in-one printer can be connected wireless?

    does anyone know if the hp 6210 xi all-in-one can be converted into a wireless printer as well as a wifi network can access and mobile devices?

    Hello

    The HP Officejet 6210xi is one USB printer, it does not offer nay network connectivitu and along such a is not supported.

    You can find the printer specifications below, as listed in section system requirements only a USB port is available for the printer:

    http://support.HP.com/us-en/product/HP-OfficeJet-6200-all-in-one-printer-series/391210/model/391212/document/c00228331#AbT0

    Shlomi

  • Officejet 5610 all-in-one printer has been installed and is not printing... Please help... :))

    Officejet 5610 all-in-one printer has recently been installed (I had printer for 4 years) and now does not print...

    Hello

    1. you remember to make changes to your computer?

    2. you receive error messages when you try to print?

    Try the steps in the following article: printer in Windows problems http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

Maybe you are looking for