Japanese/Korean/Chinese does not my computer.

Similar Questions

• Configuring updates step 3 of 3 guard repeat/is stuck and does not start computer

  When starting computer I get the message "Configuring updates 3 of 3-0% completed - turn a computer." Continue to repeat this message after it restarts and the computer will never start

  Try these steps to remedy:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not it, try to repost in the Windows Update Forum.

  Windows Update experts answering questions here:
  

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Audio does not work (computer laptop windows 7)

  Audio of my laptop does not work on anything! When I try to play audio files, it just says: "Windows Media Player may not access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "The volume is not muted (enabled in fact all the way to the top) and the speakers are fine. When I go on youtube or any other site that it doesn't. Can you please help. (PS. I don't have a sound card)

  Hello Larry,.

  You're welcome, and I'll continue to help you with this issue until it is resolved.

  Can you download the FixIT again and when he talks about this error, click on where it says "to download a utility to resolve this issue, click here.

  What are the results to start your computer in safe mode?

  Go to http://www8.hp.com/uk/en/drivers.html and select "Search now" on the right side. Commit to any software it takes for you to download.

  Once he has finished to detect your device and it does appear on a screen, select the option that says "downloads of software and the driver. Select your operating system from the list, then scroll down to the "audio" driver and select 'download '.

  Let me know the status of the issue after following the steps above.

  Thank you.

• 4620 does not recognize computer

  replaced, unable to print with usb or wireless router. Windows 8.1 operating system. Says "printer offline. Also, did print Printer Status Report, but it took 30 seconds to print this one page. No problem until needed to replace the AT & T wireless modem.

  Hello again mogandavid,

  I have found another document that deals of the printer does not print in Windows 8 and is listed as "unknown" or "not specified" or appears with a yellow Triangle on the devices and printers folder.  This document has several steps that resolve the problem you are having like so many others.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks again for your time.

• Application Finder does not, the computer will not be closed

  I am running OS X El Capitan 10.11.5 on my iMac (2.9 GHz Intel Core i5, 16 GB 1600 MHz DDR3).

  Since the update, I noticed that I can't install the latest JAVA, and now (in the last few days) my Application Finder is "not responding." Or he will raise. The Finder application is unresponsive (no doubt) is causing my computer resist the stop down (and restart) command. So I am only able to stop it by pressing the button. Help, please! I ran a utility disk "first aid", but it says there is no problem.

  Hello. Try restarting your Mac in safe mode:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• Satellite L10 - standby does not, the computer will automatically start

  Hello!
  I have a problem. My satellite L10, two months, began to behave strangely. When I put it in 'stand by' mode then after awhile it starts automatically. I do not have anything but the computer just affect position 'on '. It takes sometimes an hour, sometimes for several hours.
  I sometimes use 'stand by' because it can be over long periods of time during the days where I have the computer.
  There is a problem with my computer or - is this normal? If there is something wrong, what to do?

  Novis

  Hello

  I use the stand by mode if I don't need a laptop for several hours not days.
  If you do not need the device for a period of several days, I recommend to turn it off.
  Well, I put have a precise answer to this question.
  It's maybe something s wrong with the electronic power?
  I suggest to contact the ASP for more detailed information.

  Best regards

• When stopping down to the EXP get the message "rundll.exe program does not ' and computer does not turn off. How should I do?

  Can't stop it to exit the mode and get the data message may not be saved.

  Hello

  Windows operating system you are using?

  Step 1: You can check if the same problem occurs in safe mode with network.

  Please follow the link on how to start the computer in safe mode with network below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  For reference:

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Let us know if that helps.

• I have the hp photosmart c4780 who does not the computer print

  I have a HP Photosmart C4780 that will scan documents, photos and will copy fine, but when I want to print something from my computer it will not print it. It will send things scanned to file appropriate as well fine. I ran diagnostics, reloaded the startup disk, and he says it's very good. My operating system is Windows Vista.

  How is the printer connected?  What happens when you send the print jobs to the printer - they remain in the print queue or just disappear?  Are there any error messages?

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• Japanese e-mail does not

  When I try to use the translator never sends the message in Japanese.

  https://community.Skype.com/T5/Skype-translator/cant-send-IM-to-a-contact-using-translator/m-p/43706...

• Keyboard and mouse does not work / computer does not start

  I have a HP Pavilion a6403w that my daughter uses to the school. One day, the computer stopped boot-up.

  I get to the blue screen to choose (F10 = Setup) ect... The only key that seems to work at all is the F-10. If I press it, the computer responds by indicating it's to enter the configuration mode (but only if I press it very shortly after you turn on the machine), but the computer is hang.

  I can't get into safe mode.

  I put the recovery disk and turn on the machine, but nothing.

  I'm at a loss... any help would be great!

  Thank you.

  Stick with the HARD drive. Ask them to send it to you.

• Photosmart B010a All In One test print O: K: does not the computer print

  EGR: GIS. No error message in the control panel is READY, printed the test. Don't print your computer. 6220 with windows 7/64 bit HP computer. = network WI Fi of tiscali. the printer is connected with a cable to the computer. I also tried with the doctor. Please help me understand where I went wrong; I installed the last type of software and drivers available. Thank you, cordially Costanzo

  Photosmart All In One B010a stampa di prova 02: computer dal non stampa

  EGR: GIS. Message error nel pannello di controllo pulito PRONTA di Nessun, ha the prova stampato. Stampa NON to dal computer. HP computer a window 6220 con 7 64-bit. Rete is tiscali WI Fi. stampante e collegata con computer of al it cavo. Ho tried anche con doctor. Per favore save a just dove ho sbagliato. Ho da the Ultimo tipo di software e driver available. Grazie, Web Saluti Costanzo

  try to connect the printer to your laptop with USB connection.

• Why after years of working perfectly my xbox does not my computer for media sharing

  My xbox worked well before, when I went to my videos on table edge it would come with my zune and windows media sharing folders to browse and read my stuff. now, all of a sudden after having not changed all the settings on my laptop or xbox it no longer appears. also my media Center has stopped working and after going through the configuration several times, he won't find the Extender and now my xbox is only half as useful it has been. anyone with advice let me know what I can do but take into account I'm not a geek and I only understand simple explanation! I've literally exhausted my expertise on this need quick help!

  Hi DJSwell,

  You can consult the following wire link and check if it helps.

  Xbox to pc multimedia sharing

• Storage device does not. Computer ask me to format it before that I can use it.__The device worked fine before and has over 200 G of files it contains.

  My seagate expansion drivre has been brilliant so far. Last night I opened the properties and I check the box that says "compress files to save disk space" or something like that. Since I could not open the damn thing. If I try to open a window telling me that I need to fomat the disc in this drive (F) until I can use it. I can't findout how to cancel compression of files and I don't want to format the drive because I think that will delete all my files. I think that the compression of the files can be called "Zipper" and I need to extract, but I can't find any option to do this. Can anyone help? If I didn't leave enough information please ask what you need to know that I will answer as soon as POSSIBLE.

  Test your player:
  http://www.Seagate.com/www/en-us/support/downloads/SeaTools

  Read the entire thread:
  The disk in drive F is not formatted. Want to format it now?
  http://www.TechSpot.com/VB/topic34363.html

  I hope I could help

• New HP Z600 card mother, new battery, new power supply, Fans start but the computer does not work

  Suggestions?

  New processors? Clean the CPU?

  What I have to buy 2 CPU or can I try w / one? I tried to start with a single CPU fans does not, but computer will beep in sets of three, three times and then nothing.

  Thank you.

  It's the HP consumer support forum.

  Your HP Z600 is a product of company business.

  You would be better served if you joined the HPEnterprise business support forum and posted your question here.

  BTW, two CPU must be installed for six channels of exploitation.