Java does not work in Firefox 4, while it work correctly in Firefox 3.6 which had integrated v. 1.4.1 java but Firefox is not 4. Any suggestiions?

Similar Questions

• does not load any page as a commom user, works well as an administrator

  I've been running Firefox for centuries now, no problems previously.
  All of a sudden it does not load any page when I launch FF as a normal user. If I run FF as admin, everything works as it should.

  Hello Tyler.
  Thank you for your quick response.

  Unfortunally suggestions do not solve the problem.
  I discovered that it is in the antivirus (AVG). Once I turned off AVG, FF works as it should.
  One way or another AVG don't like FF.

  In retrospect, the problem started with the AVG Free upgrade to the paid version.
  I'll send moy.
  If the issue is resolved, I'll send another answer.
  SeeYou,
  Willem

• Windows XP does not detect any internet at all despite the computer with the modem to work.

  I recently installed Windows XP Professional on my new iMac via bootcamp.  While Windows itself works fine, it won't connect to internet at all.  Despite being connected to a modem ADSL via a Ethernet cable, and also have wireless internet, Windows does not detect any signal.  On the internet in the Control Panel, all connections page that appears is "1394 connection" under the heading "LAN or Internet high speed."  I tried several times to put in place a new internet connection through the Setup Wizard and everytime, no internet is detected.

  I know that the modem works because all the other computers in my house are fine online, including on the side of Mac of the iMac.  If anyone has an idea as to how I should resolve this problem, your help would be greatly appreciated!

  Thank you

  Daniel

  Moreover, these are things I've already tried:

  I've tried to manually and automatically set up an internet connection
  I spoke with my ISP, the modem works fine
  I have re-partitioned the hard drive and reinstalled XP

  The "1394 connection" is the IEEE 1394 (FireWire) from your computer.  There should be cable system and under the heading wireless connections "LAN or Internet high speed."   There is no need to run the Network Setup Wizard or set up a new connection.

  Open the Device Manager (Start > run > devmgmt.msc ) and go to the network adapters section.  You may need to install the drivers for them.

• Firefox does not open any window, on the menu bar that appears only in the menu "Firefox".

  This is happening to me since OSX Yosemite. Always the same in ElCapitan. Tried to remove and clean install FF, without success. I can't access what anyone, it does not open any other window, no preference do nothing.

  Hi again,

  no window-> no Burger.

  In the meantime, I was able to fix: FF installed in SafeMode to OSX. It works for me now in El Capitan, previously in Yosemite, it had no effect.

• I just installed firefox and it does not load any page

  I just installed firefox on my mac, and it does not load any page at all!

  Hi robertoberlin,

  Could you give me some additional information, and I'll try to help.

  • Do the pages in safari/workload?
  • What is the error you get?
  • What type of connection are you on? WiFi? At home? In a school / University?

• Satellite T130 - 10G: Firefox does not read any video or flash content more

  My Firefox does not read any video or flash content more. And in watching the news of repair troubleshooting/malfunction in Firefox under graphics, he said that "Direct2D activated" and 'WebGL Renderer' have been blocked because of the version of the graphics driver.

  I downloaded a new version on the Toshiba site, but an update of the driver can not find the new version.
  I had briefly solved the problem by installing the new driver from the file but it is not recognized in Device Manager.

  Automatic update through Windows just tells me that the driver is up-to-date.
  I have the Satellite T130 - 10G.

  Would be great if someone could help.

  Thank you!

  Hmmmm... as you know Toshiba doesn't support third party software so I think that your question has nothing to do with Toshiba directly.

  You find the same content with other browsers?

• My addons page does not appear any content or text

  Hello
  My addons page does not appear any content or text.

  Snapshot is in the link given below.
  http://I57.Tinypic.com/2vwek3n.PNG

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press Alt or F10 to bring up the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

  Then restart.

• DVGW/hd ts-l802a does not see any DVD/CD

  first DVD worked fine, but when I read the second DVD, it's a ticking hard sound.
  end now, he does not see any DVD/CD / audio CD.

  Is there someone who has / have had this same problem or is there someone who can help me with this problem?

  Hello!

  You must give us a little more information such as your laptop model and the OS.

  However, maybe it could be useful for you:
  http://support.Microsoft.com/kb/314060

  You can boot from a CD like Linux boot disk?

  Good bye

• I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password.

  Default password Machine virtual XP Mode

  I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password. Please giveme the default password

  If you're talking about XP Mode the default password is XPMUser.  In general you can not use Windows without a password in Windows Virtual PC that you can with Virtual PC 2007 and before.  XPMUser is used only with the XP Mode virtual machine.  All other virtual machines requires a user created password.  If you have changed the password in XP Mode and forgotten, then you have to start over.

  Windows Virtual PC is based on virtual server rather than VPC and all virtual machines need a password.  If necessary, uninstall the integration features, start the virtual machine and create a password for the admin user.  Restart the virtual machine, and then reinstall the integration features.  You will not be able to access a virtual machine created by the user that has no password, while the integration features are installed.  Once you have everything right, that a virtual machine will not be asked a password if you are the admin user in Windows 7.

  @george1009,.

  Everything got?  :)

• Windows 8 store does not install any application

  Hello Microsoft. My name is Mikado and I own a dell pavilion g6-2301ax. It comes with a windows pre-installed 8. The problem ive had to deal with is that the store windows does not install any application. After you download the application, it displays a message that the application could not be installed. The same thing happened with the update of windows 8 for windows 8.1.  Could you please help me with how I can solve this problem

  Thank you citrus but it was actually the firewall in my system that it blocked. I had to install the BFE service that does the work. Now I can install any application from the store windows.

• The product key entered does not match any available window images, please enter a different product key

  Original title: complaint of Microsoft

  Dear team,

  Please note that we had bought a laptop Lenovo S 405 of Croma store located at Silver Bow Ludhiana.

  Type of machine:-IdeapadS405APGRTXA84555M4G5008EIN(20196) mode

  Machine Type No.:-59348194

  Serial number of the machine: -.

  Laptop provided with the integrated Windows 8 homepage unilingual, we tried to remove formatting the hard drive & then tried to install Windows 8 PRO that was purchased separately, but the system does not work, system displays a message error that says "the product key entered does not match any available window images, please enter a different product key

  Ask you please help to solve this problem

  Anticipating a quick answer on the same

  Thanking you,

  Yogesh clavreul,

  +

  Hi yogesh,

  This problem could be due to the fact that the product key provided does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  You are able to start after receiving the error message on the screen?

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  For reference, you can check the link and follow the steps proposed by Steven on 24 January 2013:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404B-9b7f-2065bdb91011

  Please let us know if the problem still persists.

• Pages does not open any file more except models

  From one day to the other Pages 5.6.1 does not open any more files on my MacBook Pro with OS X 10.11.3. I tried all means: 'Open recent', 'open... '. ","With "Open Pages", without result. A restart does not help. Best regards.

  Hi Ciroamos,

  I understand that you're having trouble to open a document Pages 5.6.1 on your MacBook Pro.  Have you recently updated or changed on demand?  Have you tried to open a Pages document on icloud drive, in addition to your computer? One thing I would try is to use Time Machine and go back to an earlier date and see if you can open a document.  If you can't, then you must uninstall the application Pages and re-download from the Mac App Store.

  I would add some information below to help you with these troubleshooting steps.

  Mac OS X: how to solve a software problem

  Use Time Machine to back up or restore your Mac

  Restore specific files:

  1. Enter in Time Machine, choose the Time Machine menu , or click on the Time Machine in the Dock.

     

  2. Find files to restore:
     • Use the timeline on the edge of the screen to see your Time Machine backup files, as they were at this date and time. The timeline may also include a snapshots the.
     • Use of the screen and down arrows to reach the last time the content of the window changes. You can also use the search field in a window to find a file and then move through time, well that centered on the changes to this file.
     • Select a file, then press the SPACEBAR to preview the file and make sure it is the one you want.
  3. Click on restore to restore the selected file, or Ctrl-click the file for other options.

  Download your latest purchases

  Redownload an app

  On a Mac or a PC

  You can redownload the apps for iOS in iTunes devices and applications for your computer in the Mac App Store.

  Since the Mac App Store

  1. Open the Mac App Store.
  2. From the top of the window, click on purchases. Your purchased apps will appear.
     
  3. Scroll down to find the application you want to download.
  4. Click on install or download to the right of the item you want to download. Your application will download to your computer.

  Take care

• Satellite M40X-116 - drive does not recognize any CD or DVD

  Hi all!

  I have a big problem with my SATELLITE M40X-116; I was watching a movie when the image was just stopped and since my CD/DVD RAM drive does not recognize any CD or DVD. What can I do?
  Please I need your help as soon as POSSIBLE.
  If you know what could be the problem, please, just send an e-mail to [email protected]
  Thank you all for the cooperation
  Best regards
  Marian - Romania

  Hello

  to me, this looks like a hardware problem. It must be checked by the service, and perhaps that the drive must be replaced.

  Good bye

• Why am I selling a total of 41 pounds (various titles) in November through Kindle, but not one through iBooks? I don't promote either, and I don't know that there are several iPads out there than Kindle. Apple does not have any promotion?

  Why am I selling a total of 41 pounds (various titles) in November through Kindle, but not one through iBooks? I don't promote either, and I don't know that there are several iPads out there than Kindle. Apple does not have any promotion?

  Why are you asking? It's between you and Apple.

• Device my printer brother printer had a paper jam. I fixed the jam but it always wiil me does not perform any print job.

  Hello

  My printer has a paper jam. I fixed the jam but it always wiil me does not perform any print job. What should I do?

  Sincerely,

  Misty

  Tuesday, October 23, 2012 13:38:01 + 0000, Misty Doran wrote:

  Hello

  My printer has a paper jam. I fixed the jam but it always wiil me does not perform any print job. What should I do?

  Call brother and ask them to say that a local place that services
  their printers. He brings them and get them to fix it.

  Ken Blake, Microsoft MVP

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.